Bravis NB106 3G - Talk | Tablet, 10.1 "
Ylian-Cezar @ 15.11.18, 01:07
When replacing a broken mirror image of the stitch.
I've bought a touch, I answered honestly seller saying he has a few black, all in the rejection of zerkalgogo stitch but White came in adequate. Ali had to order a lucky worker came normal.
error STORAGE_NOT_MATCH
tablet NB106
The board K710L1-V10HQSJS8GF8GEN-WG05.WSVGANL.NB106
Conclusion: A year has passed - the memory of died (half of the year to guarantee for sure). [Shit do not fly]
tablet NB106
The board K710L1-V10HQSJS8GF8GEN-WG05.WSVGANL.NB106
Conclusion: A year has passed - the memory of died (half of the year to guarantee for sure). [Shit do not fly]
Bravis nb106 3g k710l1-v10hqsjs8gf8gen-wg06 not included. Tried all firmwares which are on different versions flashtool, everywhere one result SCATTER STORAGE TYPE EMMC, TARGET STORAGE TYPE NONE. I decided to replace the memory barun bsa08gcdrs4em, removed from the donor biwin bwctasc11c08g. Tried all the firmware that found nb106, all included without plate image, just light up the backlight. sewed theDigma Plane 1601 3G, The image appears, the plate began to hang on the splash screen digma. stitchedOf firmwaresubstituting items.ini with firmware digma. The tablet has started with the inversion of the touch screen and inverted front camera, to my surprise, even imei were in place (the memory has been formatted completely many times). Further Exampletytsvostanovil work touchscreen and ExampletytsI turned chamber. No longer found problems. Thanks to all.
Good day. Brought the plate to repair, the board - K710L1, was broken memory. I bought as a donor of the same plate, but Spreadtrum SC7731 processor. The display now only visible light. Is there a solution to this problem?
230Volt @ 12.12.18, 16:03
Bravis nb106 3g k710l1-v10hqsjs8gf8gen-wg0 6 does not turn on. I tried all the firmware that I found nb106, everywhere the tablet turns on without an image, or just the backlight lights up. I sewed this Digma Plane 1601 3G, the image appeared, the tablet began to hang on the digma screensaver. I sewed the firmware by substituting items.ini with digma firmware. The tablet started with the inversion of the touchscreen and an inverted front camera to my surprise, even they were in place (the memory was formatted completely many times). Further, following the example, the tyts restored the work of the touchscreen, and by the example, the tyts turned the camera over. No more problems found. Thanks to all.
Similar problemBravis nb106 3g k710l1-v10hqsjs8gf8gen-wg0 6 After flashing from offsite, the tablet turns on without an image, or the backlight just lights up.
Attaching items.ini from Digma Plane 1601 3G but corrected for our Bravis nb106 3g
(touchpanel.gsl.modle K710_SQ- was K710_DH
camera.main.orientation 180- it was 180, this is the orientation of the main camera, left unchanged
camera.sub.orientation 0- it was 180, it changed the orientation of the additional camera, because the camera showed upside down)
We sew through the SP Flash Tool firmware from offsite, but we specify this
items.ini (4.98 KB) After the firmware in the "assembly number" writes k710l1-v10hqsjs8gf8gen-wg05 although before this whole story was wg06
Post has been editedYlian-cezar - 05.02.19, 16:59
Maybe off topic but I will lay out the firmware Bravis NB106m long he sought
http: //www.mediafire.c...T8321_02062018_7.0.zip
Post has been editedyurec170 - 14.03.19, 20:40
http: //www.mediafire.c...T8321_02062018_7.0.zip
Post has been editedyurec170 - 14.03.19, 20:40
Bravis nb106 3g k710l1-v10hqsjs8gf8gen-wg06.wsvganl.nb106
Neither instruction does not help, one and the same error SCATTER STORAGE TYPE EMMC, TARGET STORAGE TYPE NONE. Maybe someone else that tells you not to throw out hunting, memory perepaevat too!
Post has been editedsatalexey - 26.03.19, 15:06
Neither instruction does not help, one and the same error SCATTER STORAGE TYPE EMMC, TARGET STORAGE TYPE NONE. Maybe someone else that tells you not to throw out hunting, memory perepaevat too!
Post has been editedsatalexey - 26.03.19, 15:06
NB106 3G
fee K710_MB_1.0
percent MT8321
Scheele ofitsialku MTK K710L1-V10HQSJS8GF8GEN-WG05.WSVGANL.NB106.zip
In items.ini was played:
camera.sub.orientation 0/180 # inverted front camera
touchpanel.gsl.modle K710_SQ / K710_DH # touch normal / inverted mirror +
Thanks for the topic!
satalexey STORAGE TYPE NONE = flash memory, where it is necessary to pour the firmware is not found.
Post has been editedsenseless - 29.03.19, 14:36
fee K710_MB_1.0
percent MT8321
Scheele ofitsialku MTK K710L1-V10HQSJS8GF8GEN-WG05.WSVGANL.NB106.zip
In items.ini was played:
camera.sub.orientation 0/180 # inverted front camera
touchpanel.gsl.modle K710_SQ / K710_DH # touch normal / inverted mirror +
Thanks for the topic!
satalexey STORAGE TYPE NONE = flash memory, where it is necessary to pour the firmware is not found.
Post has been editedsenseless - 29.03.19, 14:36
Іnversіya vipravlyaєtsya Shlyakhov redaguvannya items.ini file. Vіdkrivaєmo Yogo text editor (Notepad ++) znahodimo rows -touchpanel.x.reverse, touchpanel.y.reverse mіnyaєmo i values ​​of 0 to 1 abo 1 h at 0. Zberіgaєmo, proshivaє fleshtulom tіlki one Tsey file items. Provіreno, pratsyuє.
Hello! There is this miracle Bravis NB106 3G.U fellow child broke the sensor. Bought new, replaced, there was an inversion. He decided to flash - flashed in brick. PC does not detect and there are no signs. Tell me what to do?
If someone inversion touch after replacing - do not rush to sew or someone else's firmware items.bin - so you do not have the hassle.
The procedure is, to pull the tablet file items.bin (fleshtulom or something else), editing fusion items.bin, pour back.
Note: I was a touch SQ, and SQ items.bin too. Put XC, but had to put items.bin DH, because with XC parameter incorrectly worked.
Post has been editedfleshmaster - 17.07.19, 15:27
The procedure is, to pull the tablet file items.bin (fleshtulom or something else), editing fusion items.bin, pour back.
Note: I was a touch SQ, and SQ items.bin too. Put XC, but had to put items.bin DH, because with XC parameter incorrectly worked.
Post has been editedfleshmaster - 17.07.19, 15:27
NB106 planschet brought on board K03B_V1.0.2 D2 been "repaired" is not working USB.
Preobrel K03B_V2.5.3 D2 fee from Bravis NB751. Display and touchscreen but came Screen
rotated by 90 degrees. a touchscreen mirror. I flashed firmware from the official site,
Screen has become normal but does not function touchscreen. I wanted to throw native firmware only
non-working USB on the home board did not throw off. What do you advise? I wanted through the terminal
but certainly can`t rutirovat android 5.1 system. What to do?
Preobrel K03B_V2.5.3 D2 fee from Bravis NB751. Display and touchscreen but came Screen
rotated by 90 degrees. a touchscreen mirror. I flashed firmware from the official site,
Screen has become normal but does not function touchscreen. I wanted to throw native firmware only
non-working USB on the home board did not throw off. What do you advise? I wanted through the terminal
but certainly can`t rutirovat android 5.1 system. What to do?
kvpost @ 15.09.19, 22:16
I wanted to throw native firmware only
non-working USB on the home board did not throw off. What do you advise? I wanted through the terminal
but certainly can`t rutirovat android 5.1 system. What to do?
non-working USB on the home board did not throw off. What do you advise? I wanted through the terminal
but certainly can`t rutirovat android 5.1 system. What to do?
download from your tablet items.bin, edited under his touch, pour back.
Post has been editedfleshmaster - 15.09.19, 22:21
I got root in the subject Magisk have universal instruction manual patching boot using Magisk Manager but I have android 7.0
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement