Xiaomi Mi Router Pro (R3P) - discussion | [wifirouter] 800Mb \ s - 1733Mb \ s + 3x1Gb | USB 3.0



Rep: (22)
Xiaomi Mi Router Pro R3P -Discussion
Discussion пїЅ
Wi-Fi Router: 2.4GHz (800Mbit \ s) - 5GHz (1733Mbit \ s) + 3 • 1Gbit \ s | USB: USB 3.0

Attached Image

Attention!
This router does not support 2.5 / 3.5 HDDs INSIDE, you are interested in R1D, R2D and HD versions.
To install 3.5 screws, you need an external powered case.

At the moment, two types of memory memory are put into the router: MT29F2G08ABAEA and ESMT F59L2G81A. Pbboot does not support MT29F2G08ABAEA, and after installing it, get a brick.
Description
Mi Router Pro and Mi Router HD support Wi-Fi 802.11ac data at 2.4 GHz at 800 Mbps, and at 5.0 GHz, the speed reaches 1733 Mbps. Both configurations have 1 USB 3.0 port and 3 Gigabit LAN ports. The differences between them are hidden in the stuffing and memory.
Mi Router HD runs on a Qualcomm IPQ8064 processor with a clock frequency of 1.4 GHz per core, it has 512 MB of RAM (DDR3-1600 type), and the drive is set to 1 TB, in the near future another 8 TB version is expected to store all your data , Photo and video.
Mi Router Pro is based on a 2-core MT7621A MIPS chip, which operates at a frequency of 880 MHz and has 512 MB of RAM (DDR3-1200).

CPU: MT7621A MIPS Dual Core 880MHz
ROM: 256M SLC Nand Flash
RAM: 512MB DDR3 Thanks* tolikvl we learned that the UART curve loader shows 256MB
2.4G: 800Mbps
5G: 1733Mbps

In stock
dlna (DLNA) no, iptv (IPTV) no, torrent (Transmission, PT) no rocking, no media server, everything is in Chinese
sharing of folders only from a mobile client. Of the extra features, only samba is included. screw is not set at all. at all.
from the HD version differs dramatically.

http://www.mi.com/miwifihd/specs/
http://www.mi.com/miwifihd/

Firmware
The current rum is2.16.15
Full list page
Taiwanese link
2.10.46- Taiwanese firmware. English language.

Ssh- Getting ssh. The site works, only the https protocol needs to be specified and the links should be entered manually, I wrote about this inyour commentsand works without any VPN and Chinese proxy.
Old version:
Advanced06 @ 07.06.17, 21:41*
Friends, to accesshttps://d.miwifi.com/rom/sshusehttps://www.flyvpn.com
From the list, select the Chinese thread (eg Shanghai 02) and download the binary to get the desired ssh access.


2.13.65- dev

On 44 and 46 and dev firmware problems with switching channels.
P1ratRuleZZZ @ 08/05/17, 20:15*
It was possible to defeat the problem with the 149th channel, set it in the settings of location = Hong Kong, set the channel to 44 and earned.


Custom

Openwrt

Pandorabox
Updated and complete instructionsfrom* Egor1975

possibly outdated information
Download the firmware for the router, select PandoraBox-ralink-mt7621-xiaomi-r3p
http: //downloads.pando...targets/ralink/mt7621/
Installation instructions in the Instructions section.
just now noticed, lured WAN, hangs on 3 LAN.



Instructions
First start
The first screen is confirmation.
The second - the name of the point and password
The third is the location of the router (living room, office, etc.) and the admin password (a check mark under it will make the password the same as from the dot)

CustomizationPPPoE
1. 3 tabs in upper navigation
2. Icon with globe
3. Dropdown labeled DHCP
4. The next two fields are login and password.
5. Blue button

1. SSH
1. Put Dev
2. Via VPN go to [url = "http://d.miwifi.com/rom/ssh"] http://d.miwifi.com/rom/ssh [/ url], download the file and write the password
3. Write the file to a flash drive formatted in FAT32
4. Turn off the router, plug the USB flash drive into the USB port of the router
5. Hold the RESET on the router, turn it on, wait until the indicator flashes orange, release the RESET, wait until the indicator lights up blue
6. Log in to the router, for example through WinSCP using the parameters: protocol - SCP, host - miwifi.com, port - 22, name - root, password - password from item 2


2. Install PandoraBox on R3P.
Xiaomi Mi Router Pro (R3P) - discussion (Post tolikvl # 65287784)
Step-by-step installation instructions for PandoraBox on R3P
Setting up IPTV for Rostelecom operator
The problem with TV from ttk on Pandora

Installing firmware from Keenetic ULTRA KN-1810 without using uart

Reviews / Measurements / INFA
Autopsy
Autopsy
Chips
UART dump * tolikvl
Video reviewfrom* Valendar
Measurementsfrom* NekoSensei,
External screw 3.5from* lexxm6,
Mini-review and comparison of Xiaomi Mi Router Pro R3P with Apple Airport Extreme (5th)from* pep3l,
Measurement triolanvoskogo "gigabit" from* maksim4ik, http://beta.speedtest.net/result/6379163217.png

Admin 1 in 1 with previous versions. The setting is the same as in other topics (google translate and go)
USB3.0 - disabled by default. The enabled port can interfere with 2.4GHz spot.Read more
Everything except the tab with the screw corresponds to the R2D admin panel.
Photo adapter and unpacking
In our version 12V / 1.5A is used, in HD on 1TB -12V / 3A, 8TB - 12V / 3.5A

Applications
PC
The official version of the application -1.1.750
Xiaomi MiRouter 1.2.200, PC client for Xiaomi routers
Mobile
Mi WiFi
MiHome
Useful

Experience of using Keenetic ULTRA firmware

Setting up a Xiaomi Mi Router Pro R3P router using the l2tp protocol (beeline provider) on the stock firmware
Plugin-translator from Chinese! Works and offline!

For light infusion, it is recommended to use Google Chrome, which will offer to translate pages from Chinese.
If Chrome itself does not offer, then after a right click in an empty area of ​​the page, a menu opens that has the item "Translate to Russian". Further, in the translation settings, you can select an English translation, as the Chinese-Russian direction is extremely crooked.
Misstar toolbox
MiWifi-Language-Mod
MIXBOX
SDK under our router
OpenWRT for R3P
Breed Loader for Xiaomi 3P for Nand Micron Memory and ESMT
SPI firmware
PandoraBox_3Pro firmware for SPI memory.
Full dump for nand memory Micron for nand programmer
Stock firmware dump with F59L2G81A @ TSOP48



Post has been editedRamsteiner - 08.08.19, 15:09
Reason for editing: dumps



Rep: (70)
Thank. Somehow I overlooked, I was used to controlling through the app on the phone. In ss samsung recommended for 5Hz 44 channel. The tv on it began to see the network, and the rest of the devices - to issue 300m \ s on the waffle



Rep: (0)
this device came to me, too, firmware still visible raw write speed to external hdd 20-25 megabytes reading in the region of 50 mb per second via gigabit cable do not wi-fi
st4000dm000 hard drive

through miRouter the speed of downloading torrents is really a disaster more than 1 megabyte I can’t get from it although if you just download a torrent through a pc the speed is 10 megabytes



Rep: (501)
write speed to external hdd 20-25 megabytes reading in the region of 50 mb per second

quite normal indicators
downloading torrents absolutely trouble more than 1 megabyte

on other routers, the stock transmission shakes through Chinese servers, and that’s why this speed
here I think the same problem



Rep: (70)
Wi-Fi and Lan on gigabit - at the output of 300+ mb / s per speaker. There is nothing to compare, but I think you can be satisfied



Rep: (16)
Guys in vain \ not in vain ordered this miracle to replace huawei ws880 (1750 ac)?
I do not use Yusb Hard.

I want stable work on the drain and cut out the Chinese, I heard it can be done on dev versions of the firmware?



Rep: (70)
* NekoSensei , and what do you mean by Chinese? Chinese left services in the firmware, devouring memory? So they do not eat much. The router tuned and forgot. We are waiting for the firmware. On off. the site is not that there are no virgins - there is not even a starting firmware yet. Well, at least the app supports



Rep: (16)
Vo3Dyx @ 03/26/17, 18:44*
But what do you mean by Chinese? Chinese left services in the firmware, devouring memory?

Yes, they are the most, a lot of reviews about the addition from xiaomipornographic advertisingand theirobscure js scriptsin http traffic, etc.
I understand that this will not happen on NOT stock firmware - but, there will not be a "smart" application from xiaomi.

In general, it will be necessary to wait for the dev version?



Rep: (70)
* NekoSensei , I’ve heard about this for the first time, but judging by what happens with the stock firmware of the TV box from them, I don’t exclude it. On the virgin version of my previous router 3, there was nothing like that. We are waiting for the maidens, it will definitely be



Rep: (12)
Comrades, who already have this device, please check that it has the same armor-piercing performance on Tx (b, g, n) as its predecessor.
Thanks in advance.



Rep: (22)
References to HD and PRO (stable and maidens) appeared on the site with Roma. Download link is not yet available. The bin file for SSH is already available for download.



Rep: (70)
* maksii , link please? http://www1.miwifi.com/miwifi_download.html I do not see



Rep: (6)
* Vo3Dyx,

So your link is.



Rep: (22)
* Vo3Dyx,
* SakeSanUA,
They actively sway the site. Links appear and disappear.
The link to the maidens was gone, but the stable was completed.

the current stem is attached (vryatli is really useful to someone)
Attached filemiwifi_r3p_all_75bd9_2.10.41.zip(23.43 MB)


Post has been editedmaksii - 27.03.17, 13:28



Rep: (70)
Now there is, then it was not. The site is sausage, flooded. Stable from november on february router is cool



Rep: (15)
It’s interesting, but will we succeed in fastening the SATA interface to our router, like HD?



Rep: (68)
Aqua_Alex @ 03/27/17, 16:50*
It’s interesting, but will we succeed in fastening the SATA interface to our router, like HD?

No, this is done at the stage of development / design of the board.



Rep: (22)
Aqua_Alex @ 03/27/17, 16:50*
It’s interesting, but will we succeed in fastening the SATA interface to our router, like HD?

3 pages in a subject. at the past, the presence / absence of such an opportunity was discussed

By the way, owners of the HD edition began to actively post on the China forum. from the main - change the terabyte screw to 4/6 terabyte. everything is ok without additional manipulations

Post has been editedmaksii - 27.03.17, 20:54



Rep: (22)
On the router is OpenWrt Attitude Adjustment 12.09.1

opkg refers tothis repository
Which naturally does not exist. I see this architecture only in15.05Wellhere

Threat I still saw the Chinese ad blocker is already configured with the ability to add its own wheels. Now he looks at the Chinese (if he is, of course, turned on)

Post has been editedmaksii - 27.03.17, 21:27



Rep: (6)
Where to buy at the cheapest price? Giarbest is now 118, but somewhere here on the forum slipped a coupon, which should bring down to 115. Throw a coupon please.
I beg you to help determine.
Just arrived a new unopened Xiaomi Mi-router (R1D) I want to sell it and take this Xiaomi Mi Router Pro (R3P) with the hope that there will be firmware from Padawan + I have an external hard drive separately.

Immediately interested in two questions from the start in Xiaomi Mi Router Pro (R3P) is there DLNA and Samba server? And will it be generally better than Xiaomi Mi-router (R1D) (I read the next thread about it and somehow the conversations are not very).

Thank you in advance for the informed advice.

Post has been editedSakeSanUA - 27.03.17, 22:56



Rep: (22)
SakeSanUA @ 03/27/17, 20:41*
Throw a coupon please

I only taste about small coupons in jirbest. Scroll their page with them, you can throw 3-5 bucks if there are no points + cashback
* SakeSanUA,
I would not be in a hurry, you will have time to sell. The chance for Padawan to appear here is extremely small (for this you need at least one rummaging owner who will do this, but they don’t seem to be here yet).
SakeSanUA @ 03/27/17, 20:41*
DLNA and Samba server?

Samba comes from the start. DLNA as a plugin is missing.
There is a chance of receiving it in the form of a plug-in from xiaomi (or Chinese friends from the forum, but they have not yet succeeded in installing third-party plugins), either with opkg (if we configure it) or with padawan (if there is a craftsman).
All three features generally require dev firmware with SSH.

SakeSanUA @ 03/27/17, 20:41*
And will it be better overall Xiaomi Mi-router (R1D)

At the moment, this router is a direct (and many times more expensive) competitorMiWiFi 3 | Xiaomi Mi-router 3, but he is far from R1D and R2D. And so it comes down to waiting for the maids of the firmware with SSH.
Without it, this is rubbish for me, because the coverage and power of the waffle was enough for me in previous versions.

UPD
If all the same there will be joy and the Chinese will throw ROM from SSH, then I will do the English myself (maybe even a Russian, I have someone to get the translation from), put MiniDLNA and Transmission
On this my requirements for the router will be covered.

Post has been editedmaksii - 28.03.17, 09:05


Full version    

Help     rules

Now: 08/30/19, 06:35 a.m.