Xiaomi mijia Car DVR Camera
Tf card
What manufacturer of microSD cards in the registrar are you using, advise you?
Toshiba [ 48 ] ** [2,63%]
Samsung [ 543 ] ** [29,8%]
SanDisk [ 483 ] ** [26,51%]
Lexar [ 14 ] ** [0,77%]
Kingston [ 262 ] ** [14,38%]
Verbatim [ 3 ] ** [0,16%]
Londisk [ 2 ] ** [0,11%]
Transcend [ 181 ] ** [9,93%]
I do not care! [ 286 ] ** [15,7%]
Total votes: 1822
 



Rep: (44)
Xiaomi MiJia Car DVR Camera - Discussion
The latest version in the header is 1.0.13En from 12/15/2017
Applications for the registrar:Mi Dash Cam В» | Mi Dash Cam iOS В» | Xiaomi MiHome В» | Purchase " | Xiaomi club В»
  • To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison .
  • Before posting photos, read the topic Working with Images on the forum
  • Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
Attached Image

Discussions related to the purchase are discussed in the topic.Xiaomi MiJia Car DVR - Purchase!

Description
Xiaomi MiJia Car DVR 1080p Car cam.
MSC8328P processor
Sony IMX323 CMOS Matrix Chip Image Sensor.
The case is made of high quality materials and design, traditional for the company Xiaomi is the epitome of minimalism. Recorder equipped with a three-inch TFT display HD resolution. Under him his place was taken by capacitive touch keys and configure the device. The upper face of the housing is located on himself the physical power button, mount bracket and microUSB connector for charging and data transfer. The left side has the operation indicator LED and a slot for memory cards format microSD, which supports the maximum amount of up to 64 gigabytes. Located in the front diagonal 40.7mm wide-angle lens, built-in microphone, as well as the company logo MiJia. Optics comprises 6 lenses, video recorder capable of recording highly detailed video in Full HD format with a resolution of 1920 x 1080 pixels at 30 frames per second.
Main characteristics:
в—Џ 3.0 inch screen and 1.8 aperture
в—Џ The viewing angle of the camera is 160 degrees 1920 x 1080p
в—Џ MSC8328P chip, Sony IMX322 CMOS and integrated Mstar 1080p graphics processor
в—Џ Equipped with a Wi-Fi module that supports online video recording without the need for a SIM card to connect to the Internet
в—Џ Support cyclic video recording effectively saves storage space
в—Џ To fix the moment of the accident, there is a built-in shock sensor and accelerometer
в—Џ Automatic power on, no need to power on or off
в—Џ Recording is done in the popular H.264 format, so you can view recorded video on any device.
в—Џ Support for memory cards from 8 ~ 64GB class 10
Characteristics
Mark: Xiaomi MiJia
Model: MJXCJLY01BY
Interface language: Chinese, English
Battery: 240 mA
Type of: HD Car DVR Recorder
Image Sensor: CMOS
Storage Max supports external cards: microSD 8 ~ 64gb (class 10)
Display Screen size: 3.0TFT HD LCD screen
Basic information.
Aperture Range: From F1.8
Video / Photo / Audio
Record video format: H. 264
Video resolution: 1080p (1920 x 1080)
Audio system: Built-in microphone
WiFi: Yes
WiFi Functions: Image Transfer
Loop recording: Yes
G-sensor: Yes
Auto-Power On: Yes
Parking Monitoring: Not
Size / Weight
Weight: 90 g case
Size in \ p (L x H x W): 87.5 * 53 * 18 mm, 40.7mm lens If you need a polarized filter "dance" from this figure
Colour: The black

mi.com - official registrar page.
Photos from the MI website
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Useful posts + FAQ
Sections are edited and updated by the authors of the post!
  • Frequently asked Questions! - FAQ 80% of the questions are here!
  • Differences Version 1S and Others - here
  • Translation of the recorder menu of versions Before 1.0.12 - HERE
  • Translation of the menu of the registrar version After 1.0.12 - HERE
  • Translation menu. Connection to MiHome. Update firmware. Video instruction - Here
  • Filter, setting up the application, "how to flash?" - without the application - Here
  • How to connect to MiHome - Here
  • Opportunitysystemically! change the WiFi password of the recorder To read " Point IP does not change, otherwiseBRICK!
  • Ability to connect to the registrar WEB configuration - Examples
  • Access via WEB application web config To read " | Download В» The application of folk craftsmen!
  • Change the exposure, the application WiFi Camera Viewer To read " | Download В» The application of folk craftsmen!
  • Disassembly of the recorder in pictures Here
  • Recorder splicing method Here + here
  • Replacing the recorder battery Here
  • Low speed video download in cars over WiFi? - Here
  • The logger often gives the error "Format your memory card" - Here
  • No sound on video? - Here
  • How to connect the recorder to the PC (the recorder does not see) Here
  • How to update the firmware version to the English version if it does not update - Here
  • Laboratory tests report - Here
  • Suction cup holder - Here
Useful VIDEO + source
  • Video comparison on Xiaomi MiJia and Xiaomi 70 Minutes dashboards Here
    To develop
  • Video on the updated firmware version, from version 1.0.12 FullHD:Here Attached Image
  • More past video examples in versions: Here andHere
Comparison:

Xiaomi Yi Action Camera

Purchase
Discussions related to the purchase are discussed in This topic! ”
Alternative mount recorder
Useful PC software
Attached fileh2testw_V1.4.zip(207.67 KB)
пїЅ The program for detecting faulty memory cells of removable digital data drives, checking the actual recording speed and transferring flash drives, as well as checking the real volume of USB flash drives and SD cards(if in your recorder, either periodically or permanently gives an error on the flash card, or in the folder with video records there are periodic videos with errors, use this program to determine the nominal capacitive and bandwidth of your card; the video recorder may not work or the recorder will not work correctly.)

DFirmware versions
V.1.0.13 En
Attached file1.0.13en.rar(1.91 MB)
New in version:
  • Changes related to the optimization of the "factory settings"
  • Added English language.
V.1.0.13 Cn
Attached file1.0.13.rar(1.9 MB)
New in version:
  • Changes related to the optimization of the "factory settings"
  • Language in Chinese version
V.1.0.12
Attached file1.0.12.rar(1.9 MB)
New in version:
  • Advanced settings for video quality, added "good" and "normal" modes
  • Write power on settings are disabled by default.
  • Optimized emergency video recording on / off recording on power up.
  • Optimized update process for OTA.
V.1.0.11
Attached file1.0.11.rar(1.9 MB)
New in version:
(identified as 1.0.12 but this 1.0.11 is taken from the offsite )

  • This version has been updated first:
    **** optimization optimization ****
V.1.0.10
Attached file1.0.10.zip (2.32 MB)
New in version:
  • 1. Added Wi-Fi settings when on / off recorder
  • 2. The watermarks on the video are changed toorange color
  • 3. Memory card detection and identification has been optimized.
  • 4. Optimized settings interface
  • 5. Optimized shutdown mode, the interface immediately displays the shutdown screen (removed the countdown "3,2,1")
  • 6. Some bugs fixed
  • 7. Optimized item "factory settings"
  • 8. Optimized logic for memory card level processing
V.1.0.8
Attached file1.0.8.rar(1.87 MB)
New in version:
  • Added service packs for android 4.1.7 and iOs 3.12.0 for OTA update

Firmware search in progress1.0.9, 1.0.7and1.0.6If you in any circumstances, found these firmware, please write in QMS

A couple of small rules of communication in the subject:

At this stage, the language of the recorder menu only Chinese and English. Questions "Is there a Russian" will be deleted without warning! He is not and is unlikely to be!


  • In our forum, "Thank you!" It is customary to express by raising the reputation of a particular participant. If you want to thank the user, clickAttached ImageImage next to his reputation. If you do not have 15 helpful posts, ask the moderator to raise the reputation of the person who helped you through the buttonAttached Image

  • Publicationreferral materials (referral links, PR channels where there are referral links, coupons) are prohibited in any form and are equal to commercial activities, if such links are found, inform the moderators about the violation via a button Attached Image

Also, please, clearly, competently and clearly state your thoughts, observing all the rules of the Russian grammar!


Post has been editedCrazyzy - 29.01.19, 21:58
Reason for editing: Differences from version 1S



Rep: (9)
Stranger21ufa @ 14.02.18, 21:49*
set the motion sensor, for example a street lamp Chinese), the signal from which will supply power to Reg.

And receive a full garbage. Regik do not turn on or off instantly. And if the power will be turned off during the time the device is safely shut down and will not start until the next failure and the emergence of power. As a result, the unpredictable result of the motion record.

Personally, I made a small device that is suitable for any DVR. When the input voltage above 13.5 volts appears on the output 5 volts. By reducing to a voltage below 13 volts output voltage disappears after 15 seconds. Consumption of around 1 mA.
https: //drive.google.c...xxCwI/view usp = sharing?
Of course, not connected to the cigarette lighter, and a circuit board where the voltage is always present.

Post has been editedkiv69 - 09.03.19, 02:36



Rep: (1)
I stopped working touch buttons, with the inclusion of requests formatnut USB flash drive, but I can not agree because the buttons do not work ...



Rep: (426)
studioack @ 09.03.19, 15:54*
I stopped working touch buttons, with the inclusion of requests formatnut USB flash drive, but I can not agree because the buttons do not work ...

Try to reset (Reset- hole next to the opening of the microphone)



Rep: (1)
Does not help(



Rep: (426)
* studioack,
Then I think only repair, perhaps something with a train, do not drop the recorder?

Post has been editedNeVeR - 09.03.19, 13:35



Rep: (9)
Huawei smart guys n 2019 did not manage to connect wrote no Wi fi connection is connected



Rep: (426)
chket71 @ 09.03.19, 17:55*
Huawei smart guys n 2019 did not manage to connect wrote no Wi fi connection is connected

Xiaomi mijia Car DVR Camera (Post NeVeR # 82944471)



Rep: (1)
And tell me, this came today regik started his hang instead of the deceased F500lhd it was powered by the courtesy opened to the native power supply, which is 5V, 1.5A.
Can I feed them Xiaomi MiJia? Connect to it and it starts plowing, but due to the consumption of 2A (on Xiaomei 5V, 2A written) as it burned inside worried

Post has been editedmariolox - 09.03.19, 18:52



Rep: (396)
* mariolox, It should work fine. Gameday checked it consumes much less.



Rep: (2104)
mariolox @ 9.03.19, 17:51*
Can I feed them Xiaomi MiJia?
he records really consumes about 200mA, with the included screen about 400 ...



Rep: (1)
Thanks for the answers measure up yesterday itself through USB KCX-017 consumption is about 330 mA, the total consumption!



Rep: (1)
In the course of a few days of use ripe questions:
1. On regike very sensitive power button often inadvertently click it! You can somehow block it or make a tight pressing?
2.Dlina roller 2 minutes, no one knows how to expose 3 or 5 minutes?
3. Riding with the included screen will not hurt him, because he warms himself?



Rep: (66)
bolden33 @ 09.02.19, 20:33*
after the registration is connected to the power supply, set the time, and simulates the power off in the car, then the registration is cut dramatically, ie, It not automatically switched off as my other xiaomi mi70. Then connect the power, Reg automatically turns on and begins to write, but already downed.

For statistics.
A similar situation happened. Strays date-time and no external power is turned on, she writes about a low battery. But it happened after the failure of the memory card and replace on another temporary 4. (Transend not worked half a year). He writes at 4x normal, though sometimes swears.
It seems necessary to understand and "feel" the bejesus.

Disassembled. On BATT no charge.

Post has been editedjogik - 17.03.19, 00:39



Rep: (1)
mariolox @ 14.03.2019, 14:29*
In the course of a few days of use ripe questions:
1. On regike very sensitive power button often inadvertently click it! You can somehow block it or make a tight pressing?
2.Dlina roller 2 minutes, no one knows how to expose 3 or 5 minutes?
3. Riding with the included screen will not hurt him, because he warms himself?

2. 2 min clip hangs about 200 mb. Downloaded to your phone not so fast. Now imagine how much is hanging file in 5 minutes? Half a gigabyte?
3. The screen gets no direct sunlight. Yes, and the screen at 100 degrees starts to degrade about. Therefore, do not worry.
For the year tenure he can say that he regik super. But charging him is kapets live their lives. Frost was a minus 40. Works! Warmed to -10 begins to fail! Regik complains and chopped. And yet, at low temperatures the internal battery is almost not charged, and gets off date! Once a month is necessary to connect with the phone and do synchronization with the date and time. The benefit of the way it constantly reminds regik



Rep: (-1)
Prompt, after a firmware update, it says, do not write the video on the Chinese firmware, this was not. On the street - or 10 + 5, he do not care, factories, car're jamming, he turns 2 times and the red lights and he does not write anything on the display 3 times, helps restart. Throughout the winter and spring travel and constantly overload it. What is the reason? How it is possible to revert to the old firmware?



Rep: (426)
* Oberon68 ,
Yes you can, on any of the cap.
Download, unzip and place it in the root of the card Fail Sd_Car.bin firmware.
And turn on the recorder, it will sew.
During all activities must be connected to a power source!



Rep: (-1)
And the fact that it can be cut down because of the firmware?



Rep: (426)
* Oberon68 ,
I think the point the memory card.
Possibly come to an end, he has spent his life on this and gives the following results.
It can also be a battery.
Alternatively, you can install the Web Config program:
Xiaomi mijia Car DVR Camera (Post tomegadeth # 69646621)
The program is able to show the level of charge on it is possible to determine how much to charge, all that with the battery, whether the case in the charger (if it is possible a little charge gives) may in my own shows 75% (the last time checked it was a year ago) )
Just to check the memory card has H2testW program in the header, it is possible to check the bandwidth must be at least 10Mb / s.
I think if it was the case in the firmware that would be at least many of the same problem, but as it only do you have to look for the cause in the individual, be it a memory card, battery, power supply, the battery on the car itself.

Post has been editedNeVeR - 20.03.19, 09:43



Rep: (1)
Tell me, can not reproduce the sound files on mac os 10.14. None of the available players no sound (vlc, iina, quicktime).



Rep: (5)
* Jek pot , A sound recording has been included?


Full version    

Help     rules

Time is now: 11/25/19, 20:30