Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
Xiaomi Redmi Note 4X Snapdragon (3/16, 3/32, 4/64) - MIUI firmware |
Message#2 28.02.17, 17:49 | |
Xiaomi lover [offline] Group: Friendssavagemessiahzine.com Messages 468 Check in: 21.08.13 Reputation: 110 | Mini instructions for using the utilityfastboot If you are flashing in modefastbootthen all the files you want to upload to the device should be placed in the folder with the filefastboot.exe. There also usually lies andadb.exebut he has nothing to do with it. The recovery file or the boot.img file can be named as you like, the main thing is that on the command line you write the exact name of the file that you are stitching. If the file has a nameboot.img, the command is written with this name. Enter the phone modefastbootkey combinationVolume- and Power button at the same time. A hare will appear in a hat, then the phone is in modefastboot. Next we enter the directory on the computer where our files are located. I have, for example, on the diskWITHhave a foldertoolsin which the tools for working withadbandfastboot. There usually throw files.imgfor firmware. The contents of the tools folder I run the command line on the computer. I enter the teamcd C: \ toolswhich means change directory toC: \ tools. Next, I enter the commandfastbootdevices when connected via USB phone modefastboot. The command line interface displays the device identification number (a combination of letters and numbers unique to your phone). If this does not happen and the list of devices is empty, then your phone is not connected. Either a problem with firewood, or with a connection. Suppose that the phone is defined. Next, enter the command fastboot flash boot boot.img where is the wordflashmeans to flash the wordbootmeans the section in which to flash and the third word means the name of the file that is being stitched. Enter without errors and press Enter. The firmware process is fast and the result is immediately visible in the command line interface. So we requestedboot.img. If you need to flash recovery, then do the same. The recovery firmware command looks like this: fastboot flash recovery recovery.img where is the wordrecoverymeans the section into which we are stitching, arecovery.img- file name of recovery. Can you name it thoughtwrp.imgbut then the command should be written like this: fastboot flash recovery twrp.img I hope it is clear. After flashing the file, you can enter the command: fastboot reboot and the device will reboot into the system. fastboot boot twrpXXX.img where twrpXXX.img is the name of the TWRP file (it can be different, as you call it, or write on the command line) You pushEnterand the phone should boot into TWRP virtual recovery. You work in recovery. You install everything you need (RTH, patches, etc.). Rebooting into the system and virtual recovery is no longer necessary. Until the next dive into it in a familiar way. Fastboot utility commands fastboot devices - a list of devices connected to the computer (used to test the connection) fastboot reboot - device reboot fastboot reboot-bootloader - reboot the device in the bootloader fastboot flash boot filename.img - kernel firmware included in boot.img flashboot flash radio filename.img - firmware radio module fastboot oem lock - close the bootloader. fastboot oem unlock - open bootloader (erases all user data) fastboot oem device-info - shows loader unlocking information Not all teams worked for me. check. Who does not have these tools, you can download them from the topic header Inside are two utilitiesadb.exeandfastboot.exe. Unzip to rootWITHand use the instructions above. The author of the article is not me, the original post is takenfrom here Post has been editedPerfectHD - 14.03.18, 14:44 -------------------- |
Message#3 02.03.17, 09:36 | |
"E = MC2" [offline] Group: Friendssavagemessiahzine.com Messages 3388 Check in: 27.09.11 Reputation: 530 | The first phones have already gone, so I will try to describe the algorithm of actions during the firmware. Beginningfrom version 8.1 stable and global Xiaomiblocked EDL mode (Emergency Download Mode)practically on all devices !!! Therefore, if you want to install the firmware without official unlock, then use the option to enter the EDL engineering cable (ready for sale on aliexpress or offline stores, look for the manual itself in the search engine, or cut the cableoption N2do not forget +Weeman88.ThroughFastboot mode(the hare in the earflap) you can flash the Miflach only after the official unlock. This should be clearly understood, everything else is in the cap. cable name: for Xiaomi Phone Models Open Port 9008 Supports All BL Locks Engineering Cable, Deep Flash Cable Post has been editedPerfectHD - 15.03.17, 11:48 Reason for editing: In the header -------------------- |
Message#4 03.03.17, 18:15 | |
Xiaomi lover [offline] Group: Friendssavagemessiahzine.com Messages 468 Check in: 21.08.13 Reputation: 110 | TWRP 3.0.2-0 Changelog
Installation
recovery mido.img(26.25 MB) lazyflasher-no-verity-opt-encrypt.zip(420.95 KB) Post has been editedPerfectHD - 04.03.17, 11:35 Reason for editing: Source -------------------- |
Message#5 11.03.17, 20:25 | |
a guest [offline] Group: Users Messages 1 Check in: 06.08.14 3Q Q-pad LC0720C Reputation: 6 | Hello every one, i am from iran ... i can just write english i usedsavagemessiahzine.comfor many years .. so please do not delete this Unhappy the phone unfurcunatly after miui v 8.1.10.0 ED ui global global global ur ur ur ur ur ur ur ur ur ur ur ur ur ur ED ED ED ED ED closed closed Today I found a way to reach EDL mode Without Unlock bootloader. yes we can do it !!! How to do: 1 open battery door 2 disconnect battery cable 3 connect 2 gold pin near battery like picture 4 connect the cable to PC M Read the Forum Rules - Check outForum Rules! 3.1. The official forum language -Russian. The official language of the forum is Russian. 3.2. All posts must be written in Cyrillic.All messages must be written in Cyrillic. Recommended to use the translation services. Post has been editedVlad J.S. - 11.03.17, 22:12 -------------------- |
Message#6 12.03.17, 17:03 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 482 Check in: 16.01.09 Reputation: 9 | Reviews of firmware from users OverviewMiui Pro 7.6.22 Another reviewMiui Pro 7.6.22 Feedback to firmware8.2.10.0_v1 (cherva70) A small review of different firmware versionshere MultiPro 8.2.5.0 Reviewhere EpicRom Reviewhere Miui 9.0.3.0 Reviewhere, and one morehere Masik â„¢ MIUI Review (Android 7.X)here, additionhere Masik U Reviewhere Firmware review fromkosmos2011 OverviewMiRoom Overview of the port Redmi 5+MiuiPro (Android 8.1) Feedback onport from Televox, stillreview Feedback on firmwareSiemens92 Mod Miui 10 Post has been editedrinolga - 19.03.19, 14:34 Reason for editing: Review |
Message#7 12.03.17, 17:52 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 162 Check in: 18.04.11 Reputation: 5 | Author assemblies based on MIUI 8/9/10 (Installation only in TWRP) Mods from forum members: Fromsergey1789- MIUI 10 Fromdeooleg- MIUI 8/9 FromSiemens 92- MIUI 8/9/10 FromStaseg-preved- Masik â„¢ MIUI (Android 7.X),preassembly, Masik p Ported firmware: InstructionHow to switch from miui to treble Mi Max 3 - MIUI 10 Project Treble Pie , Oreo Redmi 5A - xiaomi.eu 9.2.14 (Android 8.1) Redmi 5+ - miuipro 10 (8.1 Android) , mail cloud , addition to the firmware MiuiPro 9.2.21, electronic.13 port MiuiPro 9.3.28 MiuiPro 9.3.28 MiRoom Miui 10 9.1.24 MiRoom Miui 10 Stable 10.2.2.0 MixOs 9.1.24 Masik X 2.4; Masik X 2.6; Masik X 3.0; Masik X 3.3; Masik X 3.8 Minovo 9.3.6 9.3.1 mod st gaz, 9.3.7 mod st gaz, 9.3.14 mod st gaz, 9.4.18 mod st gaz Mi Note 3 - Miui 10 9.1.17 Mi 5X - MiRoom 9.2.14 ; Revolution OS 9.3.7 , MiRoom 9.3.28 Special Edition - MiuiPro 9.2.14 ; MiuiPro 9.3.1 , MiuiPro 9.3.14 , MiuiPro 9.3.21 Port without Google / Mi-services - 8.11.15 Port 9th Android - RevolutionOS Archive (rarely updated) From cherva70 áµ¥ basedMIUI 8.2.10.0 basedMIUI 8.2.5.0 From sequoia23 áµ¥ basedMiuiPro 7.11.23 basedMiuiPro 12/7/14 basedMiuiPro 7.12.21 basedMiuiPro 7.12.28 basedMiuiPro 8.1.4 author's post From Rus102102 áµ¥ basedMIUI 9.0.3.0 basedMIUI 9.0.5.0 From zakons áµ¥ based7.12.8 global author's post(answers in the blind from global) From kosmos2011 áµ¥ ( support is terminated! ) basedGS 9.2.2.0 basedGS 9.5.11.0 basedGS 10.1.1.0 + gdisk MIUI 10 based8.6.20-29 based8.7.12 based8.7.19 based8.7.26 based8.8.2 based8.8.9 based8.8.23 based8.8.30 based8.9.6 based8.9.13 based8.9.20 based8.10.11 based8.10.25 based8.11.1 based8.11.8 based8.11.15 based8.11.22 + gdisk based8.11.29 based8.12.6 Fromgreatslon - MIUI 9 Fromseregafox95 - MIUI 9 Frompdaxda - aTerminator_mido, MIUI 9 FromWillvandom87 - MiuiPro 9.0.5.0 FromLenovoved - MIUI 10 ALFA BUILD Fromstlakers - STLedt Fromgreeshan - MIUI Repack FromJspirit - MIUI 10 Project Treble Post has been editedrinolga - 25.04.19, 20:05 Reason for editing: Port |
Message#8 13.03.17, 14:39 | |
[offline] Group: Friendssavagemessiahzine.com Messages 559 Check in: 03.09.06 Redmi Note 7 4/64 Reputation: 93 | Generalized instruction on the official unlock perform these actions only with a full understanding of the manipulations performed, if something is not clear it is better to look for information than to disassemble the phone and close the test point for those who have a phone with firmware 8.1.15.0 (8.1.10.0) as my practice has shown, the official unlock doesn't go to them (although it’s still worth a try) It is necessary to change to Developer. But since With EDL, we have trouble and cutting the cable is completely reluctant, we act as follows: 1. Preparation 1.1. Downloading from the driver headerAdb, MiFlashandMiUnlock 1.2. Unpack and install all this stuff (in the future, with an active transition from firmware to firmware, you will need it) 1.3. Downloading the firmware from the header7.2.16andTWRP Recovery 2. Transition to Developer 2.1. Because roll on 8.1.15.0 through three points on top of 7.3.9, the system did not give me, but cursed premission, set 7.2.16, which was downloaded earlier. 2.2. Just upload the firmware file to your phone and install the firmware through the built-in updater (do not install wi-fi) 2.3 Go to Settings - additionally - Restore and reset - Reset settings and reset the phone to the factory state 3. Official Unlock 3.1. After reboot, we set up a new device (I connected wi-fi, went under Mi Account). Next, go to Settings - about the device and click on the version of Miui to developer status 3.2. We act according to thisinstructions, we are interested in points number 1 and 2. 3.3. Actuallyinstruction 4. Install Recovery 4.1. We translate the phone into fastboot (from the off state of 'power' + 'vol-' to the hare of the repairing robot) 4.2. Open the folder where you installed MiFlash and go on the path MiFlash \ Source \ ThirdParty \ Google \ Android 4.3. Shift + PCM in this folder - open the command window 4.4. We connect the phone and check it with the commandfastboot devices 4.5. We unpack recovery from archive in a folder from where we launched a window of commands 4.6. Register a teamfastboot flash recovery recovery.imgwhere the word recovery means the partition into which we are flashing, and recovery.img is the name of the recovery file. 4.7. After the end of the firmware recovery, enter the commandfastboot reboot There is a small note, I immediately squeezed 'vol +' with this command and went into recovery where I requested what I needed, you can also boot the system and then reboot into recovery. All information was taken from the caps: this topicUnlocking the bootloader Xiaomi, Xiaomi RN3Pro I do not pretend to be authorship, I just generalized that there should not be the dump that was going on in the RN3Pro topic at the beginning of that year, when there were 5-10 bricks per day Post has been editedForWhat - 18.05.17, 16:49 Reason for editing: Added to header -------------------- Qtek S200 =>..>Xiaomi RN7 |
Message#9 13.03.17, 20:24 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2115 Check in: 10.10.08 Xiaomi Redmi Note 4X Snapdragon 3/32 Reputation: 283 | benjwmw After the TWRP firmware, you need to run the script from MIUI protection As a rule, you need to format DATA and SYSTEM, run the script and after that install the firmware Try running this script. If it does not start then you need to format the partitions. Here he is Attached files lazyflasher-no-verity-opt-encrypt.zip(420.95 KB) Post has been editedPerfectHD - 15.03.17, 11:50 Reason for editing: Raised in the topic header |
Message#10 13.03.17, 21:11 | |
"E = MC2" [offline] Group: Friendssavagemessiahzine.com Messages 3388 Check in: 27.09.11 Reputation: 530 | [email protected], 21:08 currently global 8.1.15 worth https://yadi.sk/d/zKpIGJ7L3Ff84QIn the fastboot you will run the batch file, put the TvRP, after unlock, on this 3.0.2, the data and system format, the script and put eu 7.3.9 without questions. Post has been editedEgory0k - 13.03.17, 21:15 -------------------- |
Message#11 13.03.17, 22:57 | |
Old resident [online] Group: Friendssavagemessiahzine.com Messages 841 Check in: 05.09.14 Xiaomi Redmi Note 4X Snapdragon 3/32 Reputation: 82 | System firmware files
Post has been editeddraiv88 - 19.06.18, 22:49 Reason for editing: Edited. |
Message#12 14.03.17, 00:05 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1725 Check in: 27.05.10 Xiaomi Redmi Note 5 3/32 Reputation: 34 | Who does not start the custom firmware, try by the rules that I dug out of another topic to put it: In TWRP: 1. Wipe - Advanced Wipe - everything except MicroSD and OTG 2. Reboot - Recovery 3. Configure TWRP (language selection, setting the time zone, etc.) We download the archive with the firmware (theme header, firmware) I advise you to check the MD5 archive with the firmware after downloading! HashTab is perfect for this purpose (tab in the file properties) 4. We connect the smartphone to the PC / laptop and copy it to the root of the internal memory (for the convenience of searching in TWRP) the firmware archives and SuperSU Stable or SuperSU Beta. Disconnect the smartphone 5. Reboot - Recovery 6. Install - select the archive with the firmware, then add the SuperSU archive to the queue (if you need root) - DO NOT tick the reboot after the firmware - wait for the process to finish 7. Advanced - Disable DM-Verify 8. Reboot - System |
Message#13 14.03.17, 10:22 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2115 Check in: 10.10.08 Xiaomi Redmi Note 4X Snapdragon 3/32 Reputation: 283 | Fix TWRP 3.1.0-0 I'm working fine Attached files twrp-3.1.0-0-mido-fix.img(26.21 MB) Post has been editedPerfectHD - 14.03.17, 22:58 Reason for editing: Added to header |
Message#14 15.03.17, 10:20 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 606 Check in: 11.06.16 Apple iPhone 7 Plus Reputation: 221 | Receive / Enter - inEdl|DOWNLOADmode - by parsing the phone. (1.)Remove the back cover from the phone (2.)We close two contacts as shown in the photo. (3.)During contact closure, we connect the phone to the PC 3.1).Your device in EDL mode. 3.2).Click REFRESH in Miflash and see your device in COM format. 3.3).Flash firmware at your discretion. All good - as bequeathed the greatDWellbut. Post has been editedPerfectHD - 15.03.17, 11:45 Reason for editing: added to header -------------------- In a man, it’s not funny what he is, but how he is funny. 2 Ways to enter the EDL mode Xiaomi Redmi 3S / 3X - MIUI Firmware (OS 6.0) (Post WeeMan88 # 53735349) |
Message#15 16.03.17, 17:05 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2777 Check in: 14.04.08 Honor 8 FRD-L09 Reputation: 508 | Hello! I noticed that when installing ROOT, when connecting to a computer, the usb connection stops working, that is, the modem mode, file transfer. This is due to my understanding that there is a special / su partition in the firmware for the superuser, and in this case Supersu works in the system-less mode, for which it repacks the kernel and changes the lines there persist.service.adb.enable = 1 persist.service.debuggable = 1 persist.sys.usb.config = mtp, adb UpdateThe edit method build.prop makes adb and mtp work normally, but the usb modem does not work. Found the final decision - using the version of the forum on the advice of the members of the forumsupersu 2.65 for recovery- it works and the root and modem and all, all, everything, even without editing build.prop. In addition, I want to share observations about the firmware: the most stable (but also "heavy", loaded with any pre-installed nonsense) are official globals - the impression is very good. The firmware from MI-globe seemed extremely interesting, on the site you can make the firmware to your liking, plus mods (audio and the weather in the blind is beautiful). I can’t say anything about xiaomi.eu - firmware as firmware, but most of all I didn’t like the firmware from Multirom .. It may of course not be a very good build, but the translation is radically different, which I’ve got used to is called differently; fonts for the amateur, the jambs of the firmware itself even after the start, etc. + I want to note that the most stable version of twrp is 3.0.2, I tried everything. Why do I judge like this? because this is the only recovery that has installed the firmware from mi-global correctly, for some reason other versions do not flash decorators and audio modules. P.S. Maybe someone will benefit from my experience of the war with the GPS signal. Watchhere. Hint: check the GPS on the bare machine and carefully pick up the accessories) All good! Post has been editedTorroRosso - 17.03.17, 00:16 |
Message#16 21.03.17, 23:18 | |
Old resident [online] Group: Friendssavagemessiahzine.com Messages 841 Check in: 05.09.14 Xiaomi Redmi Note 4X Snapdragon 3/32 Reputation: 82 | Made for more convenient installation twrp-3.1.1-8.img update from 11/03/2017 1. Turn off the phone and press the keys down the volume and the power button (should appear in the header) 2. Connect the phone to the PC 3. Unpack the archive 4. Run the installation file Flash-TWRP.bat, waiting for the execution of the script action, after which the device will reboot itself into the recovery Done! TWRP installed on your phone. twrp.zip(21.14 MB) Post has been editedmerke1993 - 03.11.17, 14:43 Reason for editing: updated twrp |
Message#17 22.03.17, 00:12 | |
Experienced [offline] Group: Banned Messages 513 Check in: 02.08.13 Xiaomi Mi 5S Plus Standart Reputation: 259 | Keyboard Xperia â„¢ 8.0.A.50 original and mod in the style of SamSonya Keyboard Enable: Language and Input-Default-Configure Input Method-Enable Xperia Original version Xperia â„¢ 8.0.A.0.50.apk Keyboard(9.56 MB) Mod '' SamSonya '' Keyboard Xperia â„¢ mod 8.0.A.0.50.apk(14.2 MB) P.S. On 7 android did not check performance. Post has been editedmaer1977 - 22.03.17, 00:28 Reason for editing: Installation |
Message#18 22.03.17, 06:12 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 394 Check in: 19.09.12 Oneplus 6 6GB RAM Reputation: 15 | Improve sound Redmi Note 4x Viperfx Post on ViperFX! Installation via recovery twrp! Tested on 6.0.1 and 7.1.1 Changed to Russian. Post has been editedLegacy777 - 26.03.17, 20:18 Reason for editing: Added to header |
Message#19 22.03.17, 18:55 | |
[offline] Group: Friendssavagemessiahzine.com Messages 559 Check in: 03.09.06 Redmi Note 7 4/64 Reputation: 93 | Splicing Instructions There are two options: 1. you have unlocked boot - minimum problems 2. your boot is locked - maybe more gestures and so, let's go: Unlocked boot 1.1. First of all, we are trying to access recovery TWRP (if installed) 1.1.1. we go to wipe - advanced wipe - we put tytski on dalvik, cache, wipe did not help? then: 1.1.2. wipe - advanced wipe - set up on dalvik, cache, system, data, internal storage (if desired), wipe and install on new firmware again did not help? 1.1.3. wipe - format data - yes we overload the recovery, we make point 1.1.2. 1.2. If recovery was not installed or failed, then through fastboot we sew or the file itselfrecovery, or full firmware via miflash Locked boot There are two options for action: disassemble the device and close the testpoint or try through mipcsuite. The first option is 100% working, I checked it myself a year ago on RN3Pro, according to the second option, the people unsubscribed, which also helps. 2.1. We disassemble and close 2.1.1. To help here is this wonderfulinstruction 2.2. Without parsing we will act on thisinstructions There is a small addition to the ssyl on the RN3Pro firmware, ourshere ps again, nothing new was invented, but only summarized Post has been editedPerfectHD - 22.03.17, 19:57 Reason for editing: Added to header -------------------- Qtek S200 =>..>Xiaomi RN7 |
Message#20 22.03.17, 21:49 | |
Experienced [offline] Group: Banned Messages 513 Check in: 02.08.13 Xiaomi Mi 5S Plus Standart Reputation: 259 | Small mod to MIUI.SU 7.3.16 firmware for installation via TWRP Backup system before installing the mod has not been canceled Made by: 1 - Rectangular photo and photo quality increase 2 - Enlarged photo for outgoing call (changed background) 3 - Added Blur in recent applications and in the reboot menu 4 - Added icons to advanced settings Installation • Copy zip to phone memory • Boot into recovery • Install zip • Reboot Download MIUI.SU 7.3.16 MiuiSu_7.3.16_by_maer1977.zip(25.99 MB) Post has been editedPerfectHD - 23.03.17, 10:01 Reason for editing: Added to header |
Message#21 23.03.17, 16:56 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 4306 Check in: 29.11.12 Reputation: 1033 | Hello everyone, I would like to add instructions for raising a brick:Xiaomi Redmi Note 4X - MIUI firmware (Post WeeMan88 # 59364287) The body, which was flashed with the firmware from the prime version, fell into the hands, the result was a screen in multi-colored squares .... drove the device into the EDL using a closure, but MiFlash did not want to see the device at rest, although the device was seen as 9008 ... QFIL utility helpedhttp: //lenovo-forums.r...0%BE%D1%89%D0%B8-qfil/She immediately identified the device and sewed the firmware for it, I do not know why it is not in the cap. Post has been editedNitrogradient - 23.03.17, 17:04 |
mobile version | Now: 04/28/19, 23:03 |