Assistant
REPLY |
TP-Link RE200 - Discussion | repeater: 300Mb \ s - 433Mb \ s | 1x100Mb |
Message#1 15.02.17, 17:36 | |
Visitor [offline] Group: Users Messages 12 Check in: 11.02.17 Reputation: 1 | TP-Link RE200- discussion � repeater: 2.4GHz (300Mbit \ s) - 5GHz (433Mbit \ s) | 1 • 100Mbit \ s
Description TP-LINK RE200 is a compact amplifier designed to expand the coverage area of your wireless network, as well as improve the signal in hard-to-reach places. The repeater is compatible with all modern standards and is able to work in two bands simultaneously. This allows the TP-LINK RE200 to delimit the load on the channel and reduce the amount of interference. At the same time, the connection speed can reach 750 Mbit / s, due to which maximum efficiency is achieved in work with bandwidth-consuming tasks and programs. Additionally, TP-LINK RE200 is equipped with an Ethernet port, which allows it to be used for connecting wired devices. Specifications Useful links: Firmware There is no curator in the subject. For questions about filling caps, please contactauto RUin QMS or moderators section through a buttonunder the messages. How to do it right, what would you understand the first time, well describedhere. Post has been editedstp101 - 29.09.17, 01:07 Reason for editing: TP-Link RE200 v.1 Firmware |
Message#82 10.12.18, 17:43 | |
Visitor [offline] Group: Users Messages 10 Check in: 22.03.18 Reputation: 1 | New firmware released -https: //www.tp-link.co...ad/RE200.html#Firmware |
Message#83 10.12.18, 20:45 | |
Experienced [online] Group: Friendssavagemessiahzine.com Messages 638 Check in: 28.04.08 UMIDIGI One Pro Reputation: 7 | |
Message#84 23.12.18, 10:01 | |
Hurt [offline] Group: Honorary Gameday Messages 9822 Check in: 27.01.07 Google Nexus 6 Reputation: 819 | How much I did not torture him - you can not drive the Internet through the Ethernet and put it on the wafer ... (At least on v1) For example, the poor dap1155 copes with it. All the settings twisted, spit, everything works except the Internet itself: ( Mystic :) sorry, I will decide something, and the device is sex ... Post has been editediSeven - 23.12.18, 10:07 -------------------- Nexus 6 (Nitrogen 9.0), Nexus 5 (Nitrogen 7.1.2), iPad 3 broke (8.4 Jail) Perfection is to do the best that you can, in all that you are involved in. The key to perfection is a sense of time. If you think and act as an immortal being, you are not perfect. |
Message#85 16.01.19, 20:46 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 439 Check in: 14.01.12 Xiaomi Mi Note 3 6/128 Reputation: 27 | Good evening, but who tried to use it as soon as the router? That is, the cable into it from the provider, and on the wifi from it to the laptop to distribute? Or something happened in December?) Post has been editedzoomer001 - 16.01.19, 22:36 Reason for editing: saw the previous message)) -------------------- Siemens A35, Ericsson R520m, T68, Mitsubishi M320, Sony Clie TJ-25, Palm Tungsten T3, SE K600, SE M600, SE P1i, Nokia 1202, LG GX200, GX500, Highscreen Alpha GT, SG Ace 2, Xperia ZR, Gpad V700, Galaxy S3d, Redmi 2, Redmi 3, MediaPad M2 8.0 2/16, RNX4x, ZB602kl, MiNote 3 |
Message#86 31.01.19, 19:49 | |
Novice [offline] Group: Active users Messages 47 Check in: 31.01.13 Reputation: 9 | If the repeater does not see or over time loses the 5GHz wi-fi network: Go to the settings of the main router, then for 5GHz network to force to set 36 channel Post has been editedpia3333 - 31.01.19, 19:49 |
Message#87 01.02.19, 17:10 | |
Visitor [offline] Group: Users Messages 13 Check in: 13.11.15 Reputation: 1 | Hello! So what is the difference between TP-Link RE200 hardware version 1 and version 2? What would you recommend to buy? In one online store, version 2 costs almost $ 7 more than version 1. |
Message#88 10.02.19, 12:05 | |
a guest [offline] Group: Users Messages 8 Check in: 16.01.19 Huawei U8860 Honor Reputation: 0 | Help solve the problem, the repeater is connected, the network sees, the Internet distributes, but for some reason the phone does not switch automatically from the router to the repeater if you walk through the rooms, then if he gets to the router he will receive the Internet from him even next to the repeater that If he switched, you need to turn off the Wi-Fi and turn it on again, then it will connect to the nearest point |
Message#89 16.02.19, 21:21 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 684 Check in: 03.04.14 Honor 6 Reputation: 7 | |
Message#90 16.02.19, 21:37 | |
Experienced [online] Group: Friendssavagemessiahzine.com Messages 638 Check in: 28.04.08 UMIDIGI One Pro Reputation: 7 | |
Message#91 18.02.19, 23:26 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 684 Check in: 03.04.14 Honor 6 Reputation: 7 | Guys, can you give ssid with re200 the same names as from the router? How in this case will the network be displayed? two with the same name or one? -------------------- Honor 6 L02 5.2.16 |
Message#92 19.02.19, 01:43 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 942 Check in: 11.10.10 Sony Xperia Z3 Compact D5803, D5833 Reputation: 40 | zhorzhik_BY, There will be a substitution router.5 hertz and 2.4 Post has been editedArtur_nt.84 - 19.02.19, 01:46 |
Message#93 21.02.19, 01:17 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 684 Check in: 03.04.14 Honor 6 Reputation: 7 | Comrades, tell me how iptv works through it? Ie from the router re200 takes 5 GHz and produces further. How, then, will iptv on a tv host with a repeater network work? -------------------- Honor 6 L02 5.2.16 |
Message#94 23.02.19, 15:37 | |
Experienced [online] Group: Friendssavagemessiahzine.com Messages 638 Check in: 28.04.08 UMIDIGI One Pro Reputation: 7 | |
Message#95 03.04.19, 22:02 | |
Novice [offline] Group: Active users Messages 37 Check in: 20.11.18 Reputation: 0 | Help solve the problem, the repeater is connected, the network sees, the Internet distributes, but for some reason the phone does not switch automatically from the router to the repeater if you walk through the rooms, then if he gets to the router he will receive the Internet from him even next to the repeater that If he switched, you need to turn off the Wi-Fi and turn it on again, then it will connect to the nearest point I have the same. I can not configure it to switch automatically. Although from the access point to the router and back normally switches. And on this repeater does not want. Even if the signal is at zero, and the repeater will be full. Maybe someone knows the problem? |
Message#96 14.04.19, 11:14 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 81 Check in: 17.04.13 Honor 8 FRD-L09 Reputation: 2 | How to set it up correctly, so that it takes 5 GHz, and distributed it at 2.4 GHz? It seems to have figured out, in the application, you need to select the main 5GHz network, then skip the 2.4 choice, it will make 2 expanded networks (2.4 + 5), then disable 5 GHz in the "Advanced network" tab and that's it. Post has been editedIamNexus - 16.04.19, 10:11 -------------------- Honor 8 Blue 32gb --- iPad 2017 32gb --- HP Pavilion dv6-6b54er MSI Z97 PC Mate --- Intel Core i7 [email protected] --- HyperX Fury Black 1600 2 * 8gb @ 2400 --- Palit Dual GTX 1070ti + Arctic Accelero Hybrid III-140 @ 2100/9000 |
Message#97 14.04.19, 20:35 | |
Visitor [offline] Group: Active users Messages 29 Check in: 29.07.08 Reputation: 0 | All the good time! There was such a problem: there is an IP camera, the stream goes from it through RSTP via wifi, but when connecting through the repeater, the video stream does not pass, although the camera is pinged and connected via telnet. Maybe someone knows how to forward a video stream? |
mobile version | Now: 04/18/19, 15:31 |