[X]Assistant

[Gluk41]

Highscreen Power Five Max - Firmware
Gionee Marathon M6; Allview P9 Energy
Description | Discussion пїЅ | Firmware пїЅ

Drivers and Utilities

SP Flash Tool

Firmware

Official firmware

Factory stock firmware V5459 Android 6.0 Power 5 Max with drivers and firmware instructions.
Beta firmware BBL7551RV_0103_T5701_beta Another mirror on mail.ru
OTA Out Update Firmware Upgrade To V5760 Stock firmware mirror and OTA updates on mega
OTA Out Update Firmware Upgrade To V5815 Full firmware BBL7551RV_0103_T5815

Unofficial firmware

Firmware from the original M6 "AMIGO" Mirror on Yandex Disk Another mirror on mail.ru Mega
Overview

Custom firmware

LineageOS Pack by Decker for Highscreen Power Five Max Who does not work fingerprint scanner, set this version of lineage os 13
Firmware based on Resurrection Remix-5.7.3 from km2001

Archive

Lineage OS (13) + Resurrection Remix + Everything you need for self-assembly (just for testing!)

Instructions

How to make backup / restore. Useful tips.

How to make a full backup firmware flashlight?
Backup only NVRAM and NVDATA flash drive partitions
Repair IMEI using the engineering menu (after resetting / flashing, unfortunately, they fly off)

How to flash?

Instructions for flashing the phone using the SP Flash Tool in Windows
Working with the Flash Tool for Linux

Irrelevant but useful

Instructions on firmware using SP Flash Tool for Windows

How to install the recovery and get root rights?

Instructions for custom recovery firmware (TWRP) using the SP Flash Tool and installing root-rights
Instructions for obtaining root-rights using Magisk
Instructions: unlocking the bootloader, installing custom recovery (TWRP) and root-rights using the terminal. For Windows and Linux

Recovery

Stock (factory)

Stock recovery from firmware V5459

Custom

TWRP 3.1.0 for Highscreen Power Five Max + Root + stock recovery from jemmini - updated to version 3.1.0. Now supports encryption, usb-otg, a lot of add. sections for backup, all settings are optimized and the Russian language is selected immediately, by default.
TWRP Recovery 3.1.0-0 for Highscreen Power Five Max -updated Decker TWRP

Archive

TWRP-3.0.2.0-decker - Well done TWRP byDecker. Supports encryption, after installation, deleting the "Data" section is no longer necessary.

miscellanea

How to enter the engineering menu?
How to view the frequencies used in a particular country, on a particular device?
Setting the background for applications running on Gionee M6 firmware
We activate the system call recording (turn off) without third-party applications
How to make any program system using Apps2SD: All in One Tool
How to make any program system using Link2SD and prevent unloading
Instructions for hiding root-rights from programs like "Sberbank" and "Android Pay" using Magisk, without using Xposed. Fully working in stock firmware
Instructions for installing Xposed and hiding the root-access from different progs that check the rights of the root on the device
As in the original firmware from GIonee M6, returning the way out of sleep and unlocking the screen without pressing a button is simply a print.
Increased circle from the contact photo in the call (you need a root) How to install
How to unpack the system.img firmware?

Survey Screenshots

Changes in the cap

22.01.18:
Removed the warning from the cap - no longer relevant.
19.11.17:
Added by:
Increased circle from the contact photo in the caller and how to set it in "Miscellaneous"
How to unpack the system.img firmware? in "Miscellaneous"
22.10.17:
Added warning
05.09.17:
Added: how to make any program system using Link2SD and prevent unloading in "Miscellaneous"
09.08.17:
Minor edits
15.06.17:
Added by:
Instructions for obtaining root-rights using Magisk in the "Instructions"
Instructions for hiding root-rights from programs like "Sberbank" and "Android Pay" using Magisk, without using Xposed in "Miscellaneous"

There is no curator in the subject. For questions about filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editedvaalf - 16.10.18, 17:19

Reason for editing: curator

[ruslan_3_]

Davydov,
Yes, in the recovery you choose, install img and that's it .. Just do not forget to backup

[Ceran_new]

The people, who through TWRP tried BackUp to do? My Systm Image does not back up. Says an error while creating a backup, the backup folder is cleared. Trying to make a backup copy of the original (Russian) firmware before installing a full (so to speak). Has anyone come across this? How to fight?
The size of this folder is 5GB. I believe that this is a limitation of the file system of the flash drive. But shouldn't TWRP automatically beat large files?

Post has been editedCeran_new - 04.02.17, 22:04

[vaalf]

M

We move to subsection:Highscreen
Fruitful communication.

M

The curator of the topic is appointedGluk41

Post has been editedvaalf - 04.02.17, 22:13

[Gluk41]

Guys, I'm sorry for not answering for so long, I also have my own life, especially on Saturday: D

mite @ 4.02.17, 18:33

Backup should be done in your version

No, everything is saved

mite @ 4.02.17, 18:33

I understand TWRP need the same as in the terminal firmware?

Yes. The second option I have already removed from the cap. Give me some time, I will make the correct instructions for the firmware with pictures.

Ceran_new @ 4.02.17, 19:52

Where does happiness come from, like native firmware?

I do not know. Question to laid out.

Ceran_new @ 4.02.17, 19:52

I ask, because they are interested in the future, namely, what will the update look like? Will it?

If the Chinese do - will. Will fly through the air. The firmware is really off, the whole HighScreen heresy on Gionee is changing in the body.

Ceran_new @ 4.02.17, 20:14

In the case of updates, we will have them? I mean global updates, such as the release of a new version of android.

I think yes. There is an update item, it checks what else is needed?
+ On this forum, in this thread, any updates will appear. What else is needed?
Do not be afraid to experiment, it's cool. Moreover, the phones on the media library is almost impossible to kill.
The only problem related to Google’s security policy - every time after unlocking the bootloader / installing root-rights - everything is reset to the factory, nothing can be done.

Ceran_new @ 4.02.17, 21:53

The people, who through TWRP tried BackUp? My Systm Image does not back up.

Backup in our TvRP is strange. I tried - backup only system, data and boot, marks these sections for backup automatically.
In principle, this is enough. Restores the rules.
But the remaining sections - the modem, nvram and other various useful sections do not back up, even though it sees.
It is necessary to reassemble / search for already ready in other topics with similar performance characteristics.

Post has been editedGluk41 - 08.02.17, 18:20

Reason for editing: About TVRP

[Ceran_new]

I will add some comments from myself regarding the replacement of the recowery file with the firmware. I tried. This trick doesn't work. In TWRP, after such a maneuver, the body simply does not enter. Dead android with an exclamation mark above it. Therefore, after the firmware with the native recowery (located in the firmware), you need to boot into the system, after that you can already change the recowery via FlashTool to TWRP. In this case, everything is OK '.

[Gluk41]

Ceran_new
Thanks I'll know. I did just that, first boot, then reflash.

[Gluk41]

With regards to the original firmware - for half a day - I am delighted!
Everything works, it works fine, the only thing I found is that there is no autoturn of the desktop.
Those. He works everywhere except Launcher.
It does not matter - there is Nova. Although stock launcher is not bad, quite.
While I will not demolish, I will look.
Regarding the firmware in general -
just like in the original for Russia, but without jambs. Everything that I complained about in my rather hard review is now in the next topic - it works here.
In addition to one more thing - on Pioneer in the car still refuses to send tags.

[Ceran_new]

Stupid question nonetheless: WHERE IS THE CURTAIN? : sveta:

[Chianuk]

Gluk41 @ 04.02.17, 23:01

With regards to the original firmware - for half a day - I am delighted!

Fine!

Gluk41 @ 04.02.17, 23:01

In addition to one more thing - on Pioneer in the car still refuses to send tags.

Maybe it's in a bunch of specific teleponts - a specific model of GU?

Post has been editedChianuk - 04.02.17, 23:06

[Gluk41]

Chianuk @ 4.02.17, 23:05

Maybe it's in a bunch of specific teleponts - a specific model of GU?

May be. But this is the only phone in the long 4 years from the moment of buying a car that refuses to show tracks.
It's a shame, damn it.
If only I knew, what kind of dig to dig, I would have fixed it a long time ago.

Posted 02/04/2017 23:15:

Ceran_new @ 4.02.17, 23:04

Stupid question nonetheless: WHERE IS THE CURTAIN?

Bottom up on the desktop swipe your finger - is it? : D

[Ceran_new]

Gluk41 @ 04.02.17, 23:12

Bottom up on the desktop swipe your finger - is it?

She is the most. However, unexpectedly ... Thank you.

[stasan2004]

Gluk41 @ 4.02.17, 16:57

Normal phone dispatcher

Please tell me: if you use the power saving mode and turn on the dark theme there, does it work? Should for example: the phone menu, SMS menu - become dark, and the text is white.
By the way, a possible problem with pushing is solved in Chinese firmware:Highscreen Power Five - Discussion (Fast dizzy73 # 47047336)

Post has been editedstasan2004 - 05.02.17, 00:13

Reason for editing: Edit

[Gluk41]

Stasan2004 @ 5.02.17, 0:00

Please tell me: if you use the power saving mode and turn on the dark theme there, does it work?

I do not know, I do not use dark themes.

Stasan2004 @ 5.02.17, 0:00

By the way, a possible problem with pushing is solved in Chinese firmware:

But thanks for that, all the points in our firmware are present, we need to raise the cap.
So far there have been no problems with pushing, but this must be tested.

[pev285]

Gluk41,

Let me add a couple of questions on the characteristics of the firmware from Jioni.
Firstly, how is the issue of working with two SIM cards solved there?
Is it convenient to call? Has the problem with automatic dialing / re-calling via bluetooth disappeared for the same SIM that was used last time?


Secondly, call recording is enabled only via build.prop?

[Gluk41]

Pev285 @ 05.02.17, 00:57

Firstly, how is the issue of working with two SIM cards solved there?
Is it convenient to call? Has the problem with automatic dialing / re-calling via bluetooth disappeared for the same SIM that was used last time?

Same. Unfortunately, everything is the same. The caller should look for another, dear or where it is not suitable. In general, in general - it is clearly seen that it is from this (well, or the same), highscreen, having cut up all the buns for something, made their creation.
By the way, in the Linux terminal, on command

dmesg -w

that in the “native” firmware from Heiskrin, that in the original from gionee - the phone is displayed the same. Lost, apparently cleaned up)))

Pev285 @ 05.02.17, 00:57

Secondly, call recording is enabled only via build.prop?

Yes. And this is the same.

Post has been editedGluk41 - 05.02.17, 01:13

[dvlad2006]

Are the languages ​​in the gionee firmware normal, I mean Russian? And another question in the engineering menu, unused frequencies can be turned off? And then I cut down on the highscreen, I have imei flew off, hesitated to recover. And the CPU frequency can be reduced by third-party programs, such as setcpu. And then only govenor Interactive and the frequency of 1.95mhz work on the drain

Post has been editeddvlad2006 - 05.02.17, 01:30

[Chianuk]

dvlad2006
screenshots are in the subject, what are you?

Posted 05/02/2017 01:32:

dvlad2006 @ 05.02.17, 01:25

And another question in the engineering menu, unused frequencies can be turned off?

Why such a painful craving to do this?

[dvlad2006]

Well, the taste and color, all have different markers. I'm such a freak. Disable unused frequencies - to save battery life, and to limit the processor to a small one, also for the same one. And they gave me a phone, what should I do with it? Throw out? Here I want to make more economical, well, so that a longer type rejoice

[Gluk41]

dvlad2006
This is something that I personally would not advise touching this processor, it already works correctly and economically from the factory.
If you want even longer work - take Google to hell, prevent programs from hanging in the background, turn on only 2G mode and turn off data transfer mode. And also turn on all wireless sources - wi-fi, bluetooth, gps
And measure how many bodies will live.
I am sure - very surprised.

Post has been editedGluk41 - 05.02.17, 01:52

[Chianuk]

dvlad2006
The battery is quite fat in this cake. Why these extra gestures? No, well, seriously?