[X]Assistant

[LOWRIDER333]

DiscussionHOMTOM HT27
HOMTOM HT27
Discussion пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory do you have in the machine?
• The results of performance tests of Android devices, see the topic: Benchmark
• Before posting photos, read the topic Working with Images on the forum
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
  

Specifications

MT6580 processor
3D accelerator Mali 400MP
Android 6.0 operating system
1GB RAM
8GB internal memory
MicroSD expansion slots, support cards up to 32GB
Screen 5.5 inches, resolution 1280x720 pixels
3G network
2G (GSM) frequencies: 850/900/1800/1900 MHz 3G (WCDMA): 850/900/2100 MHz
Number of SIM cards 1 slot: microSIM, 2 slot: microSIM
Wireless WIFI (802.11 b / g / n), Bluetooth
GPS Navigation, A-GPS
Cameras Front 5Mp. Rear 8Mp. Autofocus
Sound Built-in speakers, microphone
Battery capacity 3000mAh
Dimensions 154.0x77.8x8.9mm
Material Plastic
Fingerprint scanner Yes

Photo

Useful

TWRP 3.1.0 and ROOT
Firmware V6.1.3_20170508 and instructions

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedAlexanderL - 02.05.18, 14:07

Reason for editing: Firmware V6.1.3_20170508 and instructions

[alkosex]

sever20067Yes, he is from the store and the firmware is not custom

[sever20067]

koslan, it means that the new imei stake is no longer flying after the reset.

[suhol]

What type of memory on ht27?

[Gatin]

ht27 v7 board after replacing emms, flashed in v6, everything works

Inital Boot Ok!
BB_CPU_PID: 6580
BB_CPU_NME: [MediaTek] MT6580_S00
BB_CPU_EXT: 0xCA00, 0x8A00, 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal: 0x00000000
BromVer: 0x00FF
BLVersion: 0x0001
PreLoader: Active [Boot with PL]
BootLdrSS: NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID: 0x94
NAND Flash: NOT INSTALLED
eMMC Flash: 70010053313030313608D8E2CC47816D
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent, init HW now
eMMC FlashIC initialized
[eMMC]: FLASH_VEN: 0x70, OEM: 0100
[eMMC]: FLASH_INF: [KINGSTON], 61001
[eMMC]: FLASH_CID: 70010053313030313608D8E2CC47816D
[eMMC]: FLASH_BRT: 0x00400000, 0x00400000, 0x00400000
[eMMC]: FLASH_LEN: 0x00000003A4000000
[eMMC]: FLASH_UCP: 14912 MiB [eMMC 16 GiB]
DEV RID: 0x78AF8913104B34D927A6B2FAEC8B008F
INT RAM: 0x00020000
EXT RAM: 0x40000000 [1 GiB]
BOOT TYPE: EMMC_FLASH_BOOT
SOC VERIFY: C1
Boot ok!

ScatCFG: BaseBand: MT6580, Project: br6580_weg_emmc_m, Storage: EMMC
Setting: Flash Pre-Erase (Safe): Enabled
Setting: AFF verify: Enabled
Setting: HW verify: Enabled

BL: Check HW compatibility
BL: BBID supported by BootLoader!
BL: Check eMMC compatibility
BL: Only one records found, and determined as universal
BL: eMMC supported by BootLoader!

BL: BatteryLevel: 3738 mV
BL: BatteryLevel Ok

BL: Flash Pre-Erase
Total blocks to Erase: 1
Erase: 0x0000000001C80000-0x00000000EBB80000
Flash Pre-Erase Done, time used: 00:00:00

SecCfg Passed, 1799
BMT remark not need. Will skip
Sending Preloader ...
Use: preloader_br6580_weg_emmc_m.bin
Preloader Sent, Init passed
SecCfg Passed, 1799
PartCount: 0014
Update PMT by user request
[SpecOp]: Extend UserArea
Repartition Done!
Use FLN Mode

Processing: Flash Write
Flash now: LK
Image Flash Ok
Flash now: BOOT
Image Flash Ok
Flash now: RECOVERY
Image Flash Ok
Flash now: LOGO
Image Flash Ok
Flash now: SECRO
Image Flash Ok
Flash now: SYSTEM
Image Flash Ok
Flash now: CACHE
Image Flash Ok
Flash now: USERDATA
Image Flash Ok
Flash Write Done, time used: 00:04:25

Processing: Verify
Verify Passed: LK
Verify Passed: BOOT
Verify Passed: RECOVERY
Verify Passed: LOGO
Verify Passed: SECRO
Verify Passed: SYSTEM
Verify Passed: CACHE
Verify Passed: USERDATA
Data Verify Done, time used: 00:00:32

Update Mirror PMT
[SpecOp]: Extend UserArea
Update Done!

Update RomInfo done

Attached images

Post has been editedGatin - 29.11.18, 14:54

[forget.men]

Backup firmware for flashtool merged Infinity for Ergo A555, a clone of this unit.

https: //drive.google.c...4iOaA162IHJiQxSCykL8WT

[logio1978]

The people, tell me, I'm starting to flash and get out this figovina ... I tried different TOOLS ... nothing helps ... help pliz ... I sit without a phone, but there is no new money at all ...

Attached images

[CJIaBuK_777]

Hello! Faced the following problem. Stitched my HT27 for the first time because of intrusive ads. Everything was done well, but after a couple of weeks the problem got out again. I decided to reflash on a new one. Faced with the fact that after the firmware, the phone hangs when booting at the time of the HOMTOM inscription and after a couple of minutes it tries to reboot itself and freezes again at the same place. Plus, from the middle of the screen and to its very bottom, ripples appeared, like broken pixels, although the phone did not fall or hit. Repeated attempts at sewing did not change anything. Can anyone suggest how to handle this business or has already become a brick. Thank you in advance.

[253670489]

CJIaBuK_777,
Try to flash the firmware specified in the post#217

[cj237]

may need someone for parts, everything looks intact

[Igor515]

I confirm the problem of the error in the applicationSettingscleaned by this patchHomTom HT16 - Firmware (KiEv Post! # 73001151)
You can add to the cap!

[Aknodd]

Igor515,links are not working ...

[Aknodd]

I apologize ... Links workers. Patching ... Testing ...

[Aknodd]

The second day I use after the patch. The flight is normal, the error does not crash. Igor515,Thanks for the tip.

[tehnoyar]

Excuse me. And how to patch the error, an error occurred in the settings application, ??? For more details if you can. What are the ways. Through TVRP complicated. Error with the settings does not pop up after turning off the Internet. Very little information in inete. I have only one V9.0.1 board for it ??? From ht16 do not fit firmware ??? Just do not scold. Phone-in-law brought and does not slazit with me for a day.

Post has been editedtehnoyar - 04.03.19, 16:30

[Killsleep]

Greetings. After replacing the flash drive, the smartphone began to turn on, but there were multi-colored stripes on the screen. All firmware were tested in this topic, but there was no result. Solution found on friendlythe forumhelpedfirmwareand preloader. Maybe this will help someone to avoid problems, since I spent a lot of time and effort on finding this solution.

Attached images

Attached files

Preloader_DRAM_X5_Max.zip(74.34 KB)


Post has been editedKillsleep - 24.03.19, 14:54

[danil181]

Huge ATP! I have a kind of apparatus from the factory but about loading the current, your firmware was loaded from 5 times and the instructions helped: thank_you: