Huawei B525 - Discussion | [ltemodem] [mifi]
under the messages. How to do it right, what would you understand the first time, well described
H4m In Russia higher by 1.5 thousand and above. If you do not want to wait in large electronics stores sell Post has been editedXakep1993 - 17.04.19, 09:49
seeker55 @ 17.04.19, 09:34
Why TTL so important?
Because all connected to the router device give different values ​​packet length of life. Once the billing records flow of different numbers, he "understands" that distributes traffic to the subscriber devices of different types and immediately bans the distribution. Of course - if it is prohibited by the terms of the tariff: banned:
H4M @ 17.04.19, 09:15
where you can buy this device in Russia, or Ali order better?
Better to take where you can immediately check. And so it is - anywhere. All the same, then "break": moil:
multiknife @ 17.04.19, 09:12
1qqq @ 17.04.19, 08:31
imei on the phone to change?
1qqq @ 17.04.19, 08:31
You need to change bear on vinfonovsky, record TTL.
imei on the phone to change?
1qqq @ 17.04.19, 08:31
You need to change bear on vinfonovsky, record TTL.
Thank you very much for a practical tip !! - all pounded :)
Please help: originally was connected to the V525 desktop PC (for Lan cable), and more to the V525 is connected MFP. Earlier, the sound signal appeared in the preparation of e \ mail (at mail.ru). On there is a need to connect to the network configuration of the laptop last week, so to be able to print and scan from the printer with both desktop PCs, as well as with nouta. IT-specialist through TeamViewer on the laptop is configured remotely (laptop is connected to the V525 through another Lan cable). But now the sound signal is received e \ mail (other, but also on mail.ru server) appears on a laptop and a desktop PC is missing.
IT-specialist is now on leave, he was there with the settings made is not known. Yes, and I'm not sure that it is directly in his actions. I am trying to find himself in the V525 settings (via Web-face, how can they say) the appropriate option, but did not find. Maybe it's all in a V525? o.O
How to return back, i.e., to sound alarm is triggered only when a new email arrives on the email \ mail desktop PC?
Post has been editedunyqUm - 20.04.19, 23:24
IT-specialist is now on leave, he was there with the settings made is not known. Yes, and I'm not sure that it is directly in his actions. I am trying to find himself in the V525 settings (via Web-face, how can they say) the appropriate option, but did not find. Maybe it's all in a V525? o.O
How to return back, i.e., to sound alarm is triggered only when a new email arrives on the email \ mail desktop PC?
Post has been editedunyqUm - 20.04.19, 23:24
Good day, appeal to those who already nabarahtalsya with firmware, now worth 525 11.236.01.00.00 and web muzzle 21.100.31.00.03 mod 1.1, at the moment there is much to be updated? P.s fixing Ttl not found in the firmware. Mb or just a web muzzle it does not show? While that worked fine in January that particularly do not swing so purely YouTube maximum of an hour or two on the weekends in the country, but it's summer will go will increase the load (operator Tele2 yet)
Static IP
Yota has a static IP (white), which should enter into the router.I can not find such an item in the settings.
Without this, the router is not registered on the network (red light).
Prosvyatite plz. Thanks!
Yota has a static IP (white), which should enter into the router.I can not find such an item in the settings.
Without this, the router is not registered on the network (red light).
Prosvyatite plz. Thanks!
m7060, such an item in the settings of the router is not static ( "white") from the IP OPSOSa also assigned automatically from a specified range of IP-addresses, as well as dynamic ( "gray") (at least MTSe exactly). When connected in the settings "Dial-up connection" - "Manage Profiles" a name from the access point (APN)? As far as I know, OPSOSY apply different access points for static ( "white") and dynamic ( "gray") IP-addresses. Post has been editedmister_hat - 22.04.19, 13:40
m7060, static ip assigned automatically, anywhere anything is not necessary to register.
better to contact the technical support
https://www.yota.ru/b2b/support/internet#chat
Call us at the number 8 800 550-49-55
Write to us at [email protected]
or check - insert sim card in an ordinary smart phone - the connection must be got a gun to produce realnika
Post has been editedmsya - 22.04.19, 16:21
Thank you very much!
The problem was in Iota. They assigned IP-address from a different region.
Remapping with their IP side solve all problems.
The problem was in Iota. They assigned IP-address from a different region.
Remapping with their IP side solve all problems.
Offered to put 190 firmware after 236t.e downgrade? Downgrade normally someone faced? and what bonuses provisionally those that are up to 236 190 Firmware Firmware 2 pcs is .65 and .81 - explain to these manipulations or 236 is simply chopped off fixing TTL and not roll the script? pootomuchto bands (frequency at which the receiver will work here is a variant daw stamped on the right instead of right to remove)
ok thanks ... will try to alter and vob face separately, or put it together with the firmware zaskochet if it is necessary to separately tyanudayte link in the message from rust'a not see the muzzle vob to 190.xx
Post has been editedSolarisvrn - 22.04.19, 19:24
Post has been editedSolarisvrn - 22.04.19, 19:24
Solarisvrn Separately through the script. And then reset in vebmorde.
Post has been editeddocker5000 - 22.04.19, 20:26
©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement