After two days of intercourse I managed to reinstall Windows on it
On the manufacturer's site is
Page firmware and instructionsBut there are some troubles, and the installation script does not run. by gugleniya, understanding and smoking neighboring branches, I still was able to install windows on it!
Go!
For firmware needed ...
1.
Firmware,
WinPEand
UltraISO2. USB-flash drive for 8 gigs
Mandatory in FAT323. Docking Station or OTG-cable, USB-keyboard and USB-hub with additional power
4. The charged plate
Training
1. Unpack the archive with the firmware, we get the folder images, scripts and archive TEST_TOOL, go to the folder "scripts" and replace file
Main.zip(3.73 KB)
without changing the file get command line red error
2. installing UltraISO and write WinPE image on a flash drive in a hidden recording
3. When the recorded image; format the flash drive to NTFS (hidden partition will remain intact) and
MANDATORY call the stick WINPE, otherwise the process will hang
4. Copy the contents of the archive to the root of the stick (you can drink tea, a long process)
5. ready. proceed to the following step
Installing firmware on the tablet
1. If there is a docking station, you can go to step 3
2. Connect the OTG cable-connected hub (with keyboard and prepared memory stick) to the tablet.
3. On the keyboard we press ESC (on the dock fn + esc) and the power button until the tablet logo. We see 6 boot options, select Boot Manager. If done correctly, you should see your flash drive
4. Boot from it and go to drink tea, the script itself will do everything for you
The image of the system used by fellow Irbis TW42, which differs only by the frequency pritsessora. firmware rises without dancing with a tambourine and an additional driver installation. after installation dialog box will come out, there is something about OEM, poke "OK". the tablet will reboot, initial setup starts. after setting the tablet prompts you to upgrade to Windows 10!
PROFIT! : Congratulate: