1. Start PhoenixUSBPro.exe. 2. Specify the key file. 3. Specify img file. 4. Press Start. To appeargreencheck mark. 5. Turn off the tablet. 6. Press and holdVol +, Connect the cable MiniUSBand quickly press the power button ~ 10-12 times.. 7. The tablet is likely to be recognized as an unknown device, set right at the driver folder. (Driverunsignedin case of failure - look how to install an unsigned driver on your OS). 7.1 Install the driver from the USBDriver folder. 8. The program will PhoenixUSBPro device and firmware will interest. 9. After100%the device can be disabled.
There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.
If someone is suffering (agonized) I in finding firmware, in my case helped here thishttp://www.kocaso.com/firmware/?model=K-Mini (Download k-mini C.exe). What was the problem I do not know, but when you install the firmware from the cap did not work the screen (only light illumination). tablet model TB7831S, motherboard inet-q791M-rev01 zeng-gc 2014-03-25. Moderator attach to the hat if you can.