[X]Assistant

[kamaslon]

Orange Pi PC 2 | Orange pi zero | Orange pi lite | Orange pi prime | Orange Pi Plus | Orange Pi 2G-IOT | Orange Pi Zero Plus 2 | How do I get an Orange Pi?

Orange Pi PC 2

A photo

Specifications

Orange Pi PC 2 Specification
Allwinner H5 processor quad-core Cortex-A53 64 bit processor
GPU Mali450 Supports OpenGL ES 2.0
DDR3 1 GB RAM (shared with GPU)
Supported memory cards Maximum 64 GB MMC slot
LAN 10/100/1000 Mb / s
Video input To CSI camera input connector: Supports CCIR656 protocol for NTSC and PAL Supports video capture solution up to 1080P @ 30fps Supports 8-bit YUV422 CMOS Supports SM camera sensor
Audio input Microphone Video output
HDMI with HDCP support Supports HDMI CEC Supports HDMI 30 functions Integrated CVBS Supports both HDMI and CVBS Audio output Via HDMI and 3.5 jack
Power supply DC input without USB OTG support
Ports USB 2.0 x 3 pieces, USB 2.0 OTG x 1 piece
Other 40-pin connectors compatible with Raspberry Pi B + and GPIO (1x3) GPIO (1x3) UART, ground LEDs
Power indicator status indicator
Additionally
Infrared port
Buttons Enable
Size 85 mm to 55 mm Weight 38 g
ComparisonOrangesand different odnoplatnikov
Characterize Allwinner H5 link at the office. site

OS / Firmware

Supported OS while onof the sitethere is onlyAndroid, Ubuntu, Debian, Arch

Android 5.1

Latest! Of the benefits, I note that this image unfolds on the whole flash drive, gaps, root and cured market!Hereyou can download and read the descriptionRecommended! Linkto the original post
Android For Orange Pi Pc 2google drive
Android 5.1 with installed Gaps and root Mirror on the discassembly from dearigorborby

Ubuntu Server for Orange PI PC2google drive
Debian_Server_jessie_PC2_V0_9_1.img.xzgoogle driveUser: orangepi Password: orangepi when you enter the password is not displayed at all
ArmbianWhile raw.Changerfrom dearigorborby

Instructions

OS Installation Instructions

Instruction:
We will need:
• HP USB Disk Storage Format Tool
• Win32 Disk ImagerWin32DiskImager-0.9.5-install.exe(11.72 MB)

• SDHC card (at least 4GB / 6 class)
The following is a description of the OS installation:
1. Format the SD card using HP USB SFT. To do this, select the letter of your SD card in the program (for example, F: \), tick the Quick Format box and select FAT32 FS.
2. Open an OS image in Win32 DI, select your SD card, click on the "Write" button
3. It remains to insert the card in OPi and boot. Does not apply to Android.
Installing Android:
1. Insert the micro SD card into the computer. Remember that the card must be at least 4 GB and its class must be at least 10th. Best suited for this card brand SanDisk.
2. Download the official Anrdoid distribution from this link:http://www.orangepi.org/downloadresources/.
3. Unzip the "Android".
4. Download the "PhoenixCard" program from this link:http://orangepi.su/files/PhoenixCard.rar
5. Unzip the "PhoenixCard" and run.
6. In the window that opens, specify the path to the memory card, in the "Write Mode" section, specify "Product" and click "Format to normal". If everything goes well, you will see the message "Format card to normal mode success".
7. To write the OS "Android" on the memory card, specify the path to it in the column "Img file", in the column "Write mode" select "Startup" and click "Burn".
8. At the end of the process, click "Exit". Done! Now you can insert your card into the computer "Orange Pi" and run it. Remember that the first launch lasts longer than usual!

Russification ubuntu xfcOrange Pi PC 2 - discussion (Post by kamaslon # 57369343)andubuntu.ru/wiki/ Russification
Who prevents live error in the play market "is not supported by your device"here
Who has problems with PhoenixCard errorload CardTool Faileddownload this archiveVcredist.zip(52.66 MB)
inside 2 files and install both.

Software / Drivers

Win32DiskImager-0.9.5-install.exe(11.72 MB)

PhoenixCard_V3.1.0_20130618.zip(2.3 MB)

Purchase of accessories: Enclosures / Power / Accessories

The case, power units and everything else fits from orange pi pc, something that can be taken from the Raspberry Pi, but with the firmware trouble does not work because of different processors! In addition to the motherboard / motherboard, I do not advise you to buy anything on the site as it turns out very expensive, taking into account the paid delivery. Ali Express has a lot of analogues much cheaper

Attention!

Specified on the site of foodOranges5v 3A! Please pay attention to the fact that some OSs refuse to start from 1-2A, they need 3A! Another nuance is that the board is powered according to a specialnon-standard connectorDC 4.0mm-1.7mm! Through micro usbdo not supportFor lovers of collective farms, you can power the board through a comb(naponite what pins there, I will add here)
Original case Blue, TonedUS $ 4.50 / piece + Shipping US $ 2.13
Original power supplyUS $ 4.90 / piece + Shipping US $ 2.78
OriginalUSB DC Jack 4.0 MM-1.7 MM US $ 1.80 / piece+ Shipping US $ 3.64

My selection of cheap components

OrangeThis is a cheap copy of the Raspberry PI "Malinki" so it will not be logical to select expensive components!
Cheap USB WiFi whistle US $ 2.52 / piece
Cheap aluminum radiators 3 pcs. US $ 0.34Black Aluminum US $ 0.44 / PieceandAluminum with copperfrom Raspberry Pi 3 US $ 0.77ceramicUS $ 1.33
EnclosuresAcrylic with a place under the coolerUS $ 3.70,From Raspberry Pi 3 is very beautifulUS $ 2.99,
bread boardUS $ 1.76
Cheap cooler from Raspberry Pi 3 US $ 0.97 / piece
Stillcheaper cooler
USB HubI do not know whether it is suitable or not, but the price is very tasty US $ 1.09 / pc and a lot of reviews.
One moreUSB Hubbut with the support of add. power supplyRecommended
In the next branch they write thatPSP power supply3A great fit US $ 2.44
USB power cable US $ 1.12 one more cable with a buttonUS $ 1.49
Wireless Keyboard KeyboardRussian letters are present, there is a delivery from the Russian warehouse
Joysticks x2 USB for retro games
If you have something to add, write toLichkuadd, correct.

Different utility

Pin driveror how to give power to the board bypassing the power connector
Homemade cheap OTG charging cable
OrangePi + PC2_H5 + User + Manual_v0.9.4.pdf(3.51 MB)
Manual for payment. Say thanksZempik
Dietpie

Interesting projects of the Orange Pi PC 2 (Connecting the peripherals to the Orange Pi PC2)

1) Connecting the OLED display on the I2C bus
2) Connecting TFT display via SPI buslink to new topic
3) DVB-T televisionsay thanksMantikor

Reviews of happy buyers

prelude_sir
kamaslonandoverview
EzhikNils
Trot666 Job Overview Orangeson android and work xbox360 joystick + pictures

Group inTelegramWho is interestedjoin
Of site
Russian fan club Still

For questions about filling caps, please contactQMS .
The curator of the topic iskamaslon .

Post has been editedkamaslon - 27.05.18, 15:59

Reason for editing: Added a group in the telegram

[olej.tsil]

[email protected], 13:47

Advise proven converters on RS-232
Need to get 2 Com port.

This?

[hobbyte]

zver1276,
any onPL2303RAI think ...

Crush, if critical, the number of ports via udev.

Post has been editedhobbyte - 19.03.19, 16:28

[zver1276]

[email protected], 15:59

This?

This is on USB, need on RS232

[email protected], 15:59

any on PL2303RA, I think ...

Thank. While I bought this one -

https://voltiq.ru/shop...rs232-ttl-converter-2/

Maybe it will do ...

[hobbyte]

zver1276,
um, stupid ...
UART (3.3)<->RS232 (5) or USB<->RS232? I gave for 2 options, your for 1, sort of.

[Urdin]

Colleagues, tell me, did anyone have experience in connecting 3.5 TFT with this?Here it is.Moreover, the touch is not particularly needed, more interesting picture. I tried it from the link from the cap, something did not work out. After a long googlezh, I dug up a project of some Japanese on a githaba who was drawing graphics. Repeated, worked. At least the screen is lively and clearly compatible. But it is not quite that. I want to see console or shell.

[hobbyte]

Urdin,
I played ... I applied the pictures here, the connection as in the post from the cap"2) Connecting a TFT display over the SPI bus .
Dig in the direction of fbtft and xorg.

[tedal]

Urdin @ 03/29/19 11:19

Colleagues, tell me, did anyone have experience in connecting 3.5 TFT with this? Here it is.

go to the website waveshare and find an analogue of this display, according to their instructions, everything works

https: //www.waveshare.....ki/3.5inch_RPi_LCD_ (C)

You can download the finished image for uploading to microsd

Post has been editedtedal - 29.03.19, 12:18

[almuerto]

Managed to launch mali on the mainline kernel (Linux alarm 5.0.7-1-ARCH # 1 SMP Sun Apr 7 17:25:44 UTC 2019 aarch64 GNU / Linux)

Here for the kernel module, build r9p0, the patch for h5 will apply to it:
https://github.com/noblock/sunxi-mali

For userspace, they came from here (mali-450_r7p0-01rel0_linux_1arm64.tar.gz version from hikey):
https: //developer.arm...ali-drivers/user-space

Judging by the test, it is not worth the time spent, it was expected that it would be faster than on an orange pi pc c h3.

glmark2

glmark2-es2-drm --off-screen
=======================================================
glmark2 2017.07
=======================================================
Opengl information
GL_VENDOR: ARM
GL_RENDERER: Mali-450 MP
GL_VERSION: OpenGL ES 2.0
=======================================================
[build] use-vbo = false: FPS: 123 FrameTime: 8.130 ms
[build] use-vbo = true: FPS: 137 FrameTime: 7.299 ms
[texture] texture-filter = nearest: FPS: 142 FrameTime: 7.042 ms
[texture] texture-filter = linear: FPS: 142 FrameTime: 7.042 ms
[texture] texture-filter = mipmap: FPS: 141 FrameTime: 7.092 ms
[shading] shading = gouraud: FPS: 120 FrameTime: 8.333 ms
[shading] shading = blinn-phong-inf: FPS: 109 FrameTime: 9.174 ms
[shading] shading = phong: FPS: 93 FrameTime: 10.753 ms
[shading] shading = cel: FPS: 80 FrameTime: 12.500 ms
[bump] bump-render = high-poly: FPS: 75 FrameTime: 13.333 ms
[bump] bump-render = normals: FPS: 128 FrameTime: 7.812 ms
[bump] bump-render = height: FPS: 115 FrameTime: 8.696 ms
[effect2d] kernel = 0,1,0; 1, -4,1; 0,1,0 ;: FPS: 48 FrameTime: 20.833 ms
[effect2d] kernel = 1,1,1,1,1; 1,1,1,1,1; 1,1,1,1,1 ;: FPS: 23 FrameTime: 43.478 ms
[pulsar] light = false: quads = 5: texture = false: FPS: 147 FrameTime: 6.803 ms
[desktop] blur-radius = 5: effect = blur: passes = 1: separable = true: windows = 4: FPS: 23 FrameTime: 43.478 ms
[desktop] effect = shadow: windows = 4: FPS: 105 FrameTime: 9.524 ms
[buffer] columns = 200: interleave = false: update-dispersion = 0.9: update-fraction = 0.5: update-method = map: FPS: 31 FrameTime: 32.258 ms
[buffer] columns = 200: interleave = false: update-dispersion = 0.9: update-fraction = 0.5: update-method = subdata: FPS: 45 FrameTime: 22.222 ms
[buffer] columns = 200: interleave = true: update-dispersion = 0.9: update-fraction = 0.5: update-method = map: FPS: 35 FrameTime: 28.571 ms
[ideas] speed = duration: FPS: 90 FrameTime: 11.111 ms
[jellyfish]<default>: FPS: 68 FrameTime: 14.706 ms
Error: SceneTerrain requires Vertex Texture Fetch support, but GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS is 0
[terrain]<default>: Unsupported
[shadow]<default>: FPS: 79 FrameTime: 12.658 ms
[refract]<default>: FPS: 21 FrameTime: 47.619 ms
[conditionals] fragment-steps = 0: vertex-steps = 0: FPS: 135 FrameTime: 7.407 ms
[conditionals] fragment-steps = 5: vertex-steps = 0: FPS: 79 FrameTime: 12.658 ms
[conditionals] fragment-steps = 0: vertex-steps = 5: FPS: 133 FrameTime: 7.519 ms
[function] fragment-integration = low: fragment-steps = 5: FPS: 98 FrameTime: 10.204 ms
[function] fragment-complexity = medium: fragment-steps = 5: FPS: 62 FrameTime: 16.129 ms
[loop] fragment-loop = false: fragment-steps = 5: vertex-steps = 5: FPS: 96 FrameTime: 10.417 ms
[loop] fragment-steps = 5: fragment-uniform = false: vertex-steps = 5: FPS: 96 FrameTime: 10.417 ms
[loop] fragment-steps = 5: fragment-uniform = true: vertex-steps = 5: FPS: 96 FrameTime: 10.417 ms
=======================================================
glmark2 Score: 91
=======================================================

Post has been editedalmuerto - 08.04.19, 12:21

[igorborby]

almuerto,
But look, some tests in a stupor, some norms, or something with arrays (indexing) are either not used by DMA or not correctly, plus all Mali’s built-in graphical functions are not used, and it can even overlap the address space of the RAM itself with other applications, there is not a conveyor but a spread (but I think the latter is unlikely). Drop the video on YouTube and skip the link for a visual assessment.

[MURic]

Good day! I ask for help in identifying the device

Attached images

[Vyacheslav-s]

MURic,
High Quality lvds driver android PCBa (the board was sold under the name Korteks PCBA).

And you most likely here -LCD displays and monitors
they understand it more.

Post has been editedVyacheslav-s - 11.04.19, 10:03

[igorborby]

MURic,
Very similar player 4k, and what's on the back
One can see nand, RAM, bluetooth or waffle, the photo is not visible. Sorry for the glue radiator, open and you can immediately understand
Or download the tea varnish and search for hieroglyphs in chrome, and then let the wap translator be translated, well, something like that. I did it once, I went through the clave, because not all 900 are used there.

Post has been editedigorborby - 11.04.19, 10:48

[Wolf3d3]

Dr_Perry_Coke @ 03/04/19, 11:43

, the question is whether it is possible to connect this display without buying a scaler to Orange?

It is impossible.
What is the problem the Scaler will buy from the Chinese, with dsub there is a penny that with hdmi is much more expensive.

[krot11777]

Hello people!

There is a shorter image of a card with data.
They made a "prog" in Linux called dd, and Linux debian stretch

How and what is the image of this garbage open ???
Daiemon Tuls, UltraISO, Linuha in VirtualBox could not ....

There is still only Rapsberry, Orange is mute.

[WereWoolf]

krot11777, vinduzyatnik ... Search dd under take out, is

Post has been editedWereWoolf - 12.04.19, 12:45

[igorborby]

WereWoolfwell, why is it so rude of wines ..., ;-), the person just didn’t quite figure it out, when I go to the gas-makers, I say: I have this crap, the workmen are smiling, the youth is being clever. I tell them easier, who has learned what, earns so much

[tedal]

krot11777 @ 04/12/19, 12:29

How and what is the image of this garbage open ???

you have to open it (such as mount as a cd image or do you need to write it down? Etcher and Win32 Disk Imager should be able to write under win

Post has been editedtedal - 12.04.19, 14:19

[geraham]

krot11777 @ 04/12/19, 12:29

There is still only Rapsberry, Orange is mute.

kpartxsmoke

[Incognito +]

Hello! There is an idea how to bury us LibreELEC ??? Something I can not find the finished image.

[krot11777]

I did not understand the guys.
There is an image of a certain system with all sorts of data recorded on a micro SD card.
For me, they made a backup of this information, but they did it on Scratch, and on Orange.

That is, I have to write this heavy file, through Win32 for example, cram it into Raspberry and it should earn everything?

Posted 04/12/2019 4:49 PM:

WereWoolfI also need to open this image with something, 14.8 GB by the way.