[X]Assistant

[acidhit]

Smart Box Beeline N300[openwrt] - firmware пїЅ
Wi-Fi Router: 2.4GHz (300Mbit \ s) | 5 • 100Mbit \ s | USB: x1 (3G, 4G modems, printers, etc.)

• In the subject are allForum Rulesor10 commandments novice who is hard to master the Rules of the Forum
  
• Discussion of devices not related to this topic is prohibited. If the theme you need for a specific model does not exist - create it.
  
• Instead of saying “Thank you!” UseIf you have less than 15 posts - click on the button.under the message where they helped you, and write thanks.
  
• Useful topics to note:Forum FAQ, How to search the forum?, How to remove the image under the spoiler.

Photo_router

Photo_in_section

Description

Everything that you do - at your own fear and risk!
Instructions on firmware:http://ingodwetrust.ru/openwrt-flashing/
Video firmware:https://www.youtube.com/watch?v=P9g-rqdLU9U
Brief instruction (no action description):

Brief instruction

1) Download the boot image.
2) Download the firmware.
3) Download Telnet client and TFTP client.
4) Log in to the router as a super user. For this
For firmware versions earlier than 2.0.25:
Username: SuperUser
Password: Beeline $ martB0x
-----------------------------
for firmware starting from 2.0.25 (thanks for the info to Bomrin user from forum.ixbt.com)
Username: SuperUser
Password: SFXXXXXXXXXX (the serial number of the device is indicated on the sticker behind the device)
5) Then click on Advanced Settings ->Others ->Access control
Put a tick in the item TELNET Admin: Allow for LAN
Click Save, after Apply.
Reboot the router and go on.
6) Connect via Telnet and merge the backup of the current firmware.
Run Putty and enter the following settings (IP 192.168.1.1, Telnet)
3We open. In the window that opens, enter the login and password similar to those used on the first paragraph (SuperUser: SF ********)
7) drive sh
8) Make a backup of the firmware on the flash:
cd / mnt / shares / A
mkdir mtd_backup
cd mtd_backup
dd if = / dev / mtdblock0 of = mtd0
dd if = / dev / mtdblock1 of = mtd1
dd if = / dev / mtdblock2 of = mtd2
dd if = / dev / mtdblock3 of = mtd3
dd if = / dev / mtdblock4 of = mtd4
dd if = / dev / mtdblock5 of = mtd5
dd if = / dev / mtdblock6 of = mtd6
dd if = / dev / mtdblock7 of = mtd7
dd if = / dev / mtdblock8 of = mtd8
dd if = / dev / mtdblock9 of = mtd9
dd if = / dev / mtdblock10 of = mtd10

cd /
/etc.ro/usb/usb_u.sh
9) sc_flash -w 1ffa0 -o 30
sc_flash -w 1ffa1 -o 31
sc_flash -w 1ffa2 -o 30
sc_flash -w 1ffa3 -o 33
check: sc_flash -r 1ffa0 -c 4 should give out 30 31 30 33 !!!!!!! Very important!

10) Go to the admin panel of the device
Advanced settings ->Others ->Software Update
Select the bootloader_smartbox-to-boot_97d.img boot loader image and click Run update.
After 3-7 minutes the boot loader will sew up and the router will reboot. You will understand this by the LEDs on the front panel that are lit up.
11) We connect the PC with the patchcord and the router (Attention, we plug the router into the first (LAN1) GRAY port, not red).
Let's register on the network interface card a static IP 192.168.1.10, a gateway 192.168.1.6
12) Disable firewall (before uploading the file to the router via FTP).
13) Then we launch the TFTP client, drive in IP 192.168.1.6, select the firmware file N300_1.2.bin and click Upgrade. We wait a lot of time ... do not worry ... wait ...
(If, suddenly, the download does not occur, then turn off the router, hold down the reset, turn on while holding the reset for 15 seconds and try again).
14) We put DHCP. The router will distribute IP addresses ...
15) Then, via SSH (or Telnet if you wish), we connect to the router (for Windows, I recommend the Bitvise SSH Client) and drive it to the console.
mtd erase rootfs_data

Firmware:firmware, mirror.
Loader:Bootloader
tFTP client to download firmware

Specifications

Router: Beeline SmartBox N300.
Processor: Realtek RTL8197D (660 MHz)
Flash memory: 16 MB (Winbond W25Q128FVSG)
RAM: 64 MB (EtronTech EM6AB160TSD-5G)
WiFi module: Realtek RTL8192CE 802.11bgn 2T2R
USB 2.0 - there is 1.
LAN - 4 pcs. (100 Mb / s)
WAN - 1 pc. (100 Mb / s)
JTAG is, 12-pin. J21 connector. (For firmware)
Serial Port - is, 4-pin. J22 connector. (For access to the console) at a speed of 38400, 8, N, 1

Useful information

Characteristics of the subject on WikiDevi
Beeline Smart Box is a branded provider router Beeline originally intended to work only on Beeline networks. The router itself is manufactured by Sercomm in Taiwan for Beeline’s order. At the core of the router is a reference card based on Realtek 8197D. The router has support for IPTV and the ability to use it as a network storage.

The router has a USB port. You can connect a USB flash drive or external hard drive to the router to share them over the network, as well as some USB modems.
Hang the script on the button (GPIO)
Useful packages for the processor.
How to restore stock firmware.
Ergil firmware version
How to reset the settings to default if the password is forgotten when the Web-muzzle, Telnet, SSH are not available.
How to reassign one of the LAN ports to the WAN zone (for IPTV or in the case of a non-working WAN)
How to restore backup
4G modem connection E3272
A bunch of Huawei 3372h in highlink + Smartbox with firmware 1.3 from Ergil + sim card MTS
Do not flood TFTP firmware from under Ubuntu
The decision to remove the interface "data collection" on some of the firmware PukinDukin
Full dump NOR-flash memory Stock firmware v2.0.29
Archive ingodwetrust files and manuals for uploading to the OpenWRT subject and rolling back to stock

Firmware

Test firmware with L2TP support
IPTV Firmware - xupnpd
Firmware
PukinDukin Firmware

There is no curator in the subject. For questions about filling caps, please contactauto RUin QMS or moderators section through a buttonunder the messages. How to do it right, what would you understand the first time, well describedhere.

Post has been editedstp101 - 23.05.19, 12:21

Reason for editing: Archive ingodwetrust files and manuals for uploading OpenWRT to a subject and rolling back to stock

[lewisreed]

Unattended lying around at home, sent to the scrap immediately after connecting to the Beeline L2TP, because it is not just sercomm, it is even worse. They no longer do that.

[acidhit]

In this and the chip of this router, that many people abandoned him a long time ago, and many think that it is suitable only for the Beeline provider and sell them, for example, for Avito for 500r. Those. for 500r you can get a very smart router, with 16 Mb Flash memory 64 oprativki + OpenWrt, for which these characteristics will be enough for the eyes ... You can pick up the HDD and the printer, different 3G / 4G modems. You can organize a home media server.

[lewisreed]

acidhit
This is all true, but there is one big "BUT" who wants to have so many problems on a pen-based router with 16 Mb of Flash and 64 Mb of RAM?
Of course, there are krasnoglaziki, but this is a very big joy.

[acidhit]

But. All the same, it works! It works stably and copes with all functions.
For example, I work on the street in a mounted electrical panel and in the heat of +30 and in frost -30. A Hikvision video surveillance camera is connected to it (China with Ali - no cloud support), powered via a PoE adapter, which is also located in the electrical panel. A 4G ZTE MF 823 modem is inserted into the router. The router connects to the Dir-620 home router on a tomato with a raised PPtP server, a VPN network is created. The settings are made so that port forwarding from the home router to the VPN will work, i.e. To the video surveillance router (this problem is related to the 4G modem which has a gray IP). Everything works pretty well (sorry, the speed is not enough for 3G YOTA, Full HD slows down in real time), but you can keep track of what happens at the construction site.
Access is organized from any computer, smartphone, tablet.

Router time

Camera and modem operation time

This time is associated with modem disconnects, etc.
I am sure that this router will work fine at home as a home media server.
What is red eyes?

[lewisreed]

Do not misunderstand me, I do not blame the fact that this router is really not capable of anything. As you have already indicated, it can and should work in conjunction with other equipment (more productive or something).
But if you treat it as a carrier (for the Beeline IPoE / L2TP network, then it’s better not to contact VPN at all), it’s hardly a use, even if you have a network drive per terabyte, i.e. Xiaomi with higher performance characteristics is doing it at times (https://ru-mi.com/router-xiaomi-mi-wi-fi-3). We take the category of routers up to $ 50.
Krasnoglaziki are linuksoidy.

[STILL-FREE !?]

By reference to the bootloader, it issues a file with the firmware. I tried to google, I did not find this file. Or am I in the morning stupid?

[acidhit]

You are right hereBootloaderlink to bootloader. That's just the topic can not forward.

[acidhit]

How I connected a 4G USB modem (ZTE MF823):
1) Created a new interface:

Creating a new interface

2) Chose the settings when creating:

settings when creating

3) Settings on the created 3G / 4G modem interface.

Settings on the created 3G / 4G

[wein72]

Guys, what is the latest openwrt collected on him? The actual assembly date is of interest. Which SDK? I remember that on ingodwetrust in someone someone laid out links to the new SDK, but the firmware did not seem to be able to be assembled by anyone. Collected already?
There are no problems with the waffle, etc.? Like in the same place, they wrote that there were problems with the igmp proxy and the waffle.

[Matematik18]

[email protected], 21:20

3) Settings on the created 3G / 4G modem interface.

Hello! I fight for several hours trying to make Smart Box and ZTE MF112 make friends. I reshared the smart box, but the modem stuck with it in my back she never sees. You write that modem drivers should be installed, please tell us more about them (what specifically, where they can be accessed, where to fuck them). I hope very much for your help.

Post has been editedMatematik18 - 29.01.17, 00:59

[AL197105ALEX]

The second day I fight openwrt firmware I can not flash it, I follow the instructions to the point

Acidhit @ 02.01.17, 16:27

10) Go to the admin panel of the device
Advanced settings ->Others ->Software Update
Select the bootloader_smartbox-to-boot_97d.img boot loader image and click Run update.
After 3-7 minutes the boot loader will sew up and the router will reboot. You will understand this by the LEDs on the front panel that are lit up.
11) We connect the PC with the patchcord and the router (Attention, we plug the router into the first (LAN1) GRAY port, not red).
Let's register on the network interface card a static IP 192.168.1.10, a gateway 192.168.1.6
12) Disable firewall (before uploading the file to the router via FTP).
13) Then we launch the TFTP client, drive in IP 192.168.1.6, select the firmware file N300_1.2.bin and click Upgrade.

it boots and it selects the firmware file N300_1.2.bin does not want what I am doing wrong

[acidhit]

I think that you are doing everything right. But watch the video again:https://www.youtube.com/watch?v=P9g-rqdLU9U
Pay attention to how much time it takes to fully load the router after clause 13 (quite a lot) - maybe you are just not waiting for the full load (firmware) of the router.

[Stepenen]

Who did Thor sew in him?

[Herzegm]

Guys, does my ping constantly jump through wifi, especially in tanks, if there is an opportunity to somehow overclock a router?

[MiDNiT3]

Good topic.
I lost a normal router that served for 7 years, I had to pick a piece of shit from a subject.
It seems that the networkmap and tr069 services are pootrubal, and judging by the top load is low, but the ping in the toys after some time becomes wild, and it turns out to be a slide show.

Interested in such a question - how on this version of OpenWrt c IPTV? STB from biline can be connected?
In the comments to the original article on the firmware they say there are problems with this ...

[wein72]

MiDNiT3 @ 03/07/17, 01:05

STB from biline can be connected?

And what's the problem then? Regularly, they generally connect through the small switch that is in front of the router (or other Internet users).
On openvrt generally no problems with this should be. As far as I remember, you simply take and push one of the LAN ports (with the prefix) into the same bridge as the WAN. It turns out at you these ports will work as a switch and all. I can’t see any wisdom here with igmp proxy, etc.

[megagiga]

Guys A couple of questions, does this router work with OpenWRT firmware with biline L2TP? And then my Zyxel keenetic lite didn’t start up after flashing OpenWRT and long shaman dancing with the admin tambourine. Rather wound up, but it was impossible to connect to the Beeline tyrnet. And the second question also concerns the Open WRT firmware. I saw, read, studied the expanses of the great web, but I didn’t find information about the print server on this router anywhere. Does he start at all? and it is worth so tormented with his purchase (for 500r) and setting?

[MiDNiT3]

[email protected], 13:27

Biline L2TP

L2TP is fundamentally needed?
And then they have since last year such as IPoE ("Web-authorization") ...

[MiDNiT3]

There was a suspicion that Wi-Fi was to blame for my slideshow.
If you look at the web-face (biline) inDevice Info - Local Connection - Wireless Statistics
on the return on my SSID in the columnDrop packetsincreasing nonzero value.

At the same time ifconfig shows a bunch of feedback errors on the wifi interface:

~ # ifconfig wlan0
wlan0 Link encap: Ethernet HWaddr 94: 4A: 0C: 4D: 57: 95
inet6 addr: fe80 :: 964a: cff: fe4d: 5795/64 Scope: Link
UP BROADCAST RUNNING MULTICAST MTU: 1500 Metric: 1
RX packets: 79019 errors: 0 dropped: 0 overruns: 0 frame: 0
TX packets: 73783 errors: 14336 dropped: 0 overruns: 0 carrier: 0
collisions: 0 txqueuelen: 0
RX bytes: 12067012 (11.5 MiB) TX bytes: 73307287 (69.9 MiB)
Interrupt: 11

Interestingly, is this setting somehow treated?

[megagiga]

MiDNiT3,
Yes, because in my Mohosranska authorization passes through L2TP, and another authorization is not expected in the near future.