[X]Assistant

[Amizon1000]

DiscussionOukitel C5 Pro
Oukitel C5 Pro | Dexp Ixion MS550
Description | Discussion пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
  
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
  
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
  
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory is in your machine?
  
• The results of performance tests of Android devices, see the topic: Benchmark
  
• Before posting photos, read the topic Working with Images on the forum
  
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
  

Photo

Specifications

CPU:MT6737
3D accelerator:Mali-t720
RAM:2 GB
Inner memory:16 GB
Expansion Slots:MicroSD, support for cards up to 128 GB
Screen:5 inches, resolution 1280x720 pixels (multitouch supports up to 2 touch points)
Network:4G (LTE) Works with all operators in Russia
Frequencies:2G (GSM): 850/900/1800/1900 MHz 3G (WCDMA): 850/900/2100 MHz 4G (FDD-LTE): B1 (2100) / B3 (1800) / B7 (2600) / B20 (800)
Number of SIM cards:2 microSIM + 1TF card
Wireless interfaces:WIFI (802.11 b / g / n), Bluetooth
Navigation:GPS, A-GPS
Cameras:Front 2 (5) MP. Rear 5 (8) MP. Autofocus
Sound:Built-in speakers, microphone
Battery capacity:2000 mAh
Dimensions:144.6x72x9.3 mm
Weight:174.0 grams.
Material:Metal frame and plastic case
The fingerprint scanner:Missing
Connectors:USB host / OTG, microUSB
Supported languages:Russian, Ukrainian, English, German, etc.

Additional Information

Smartphone Oukitel C5 Pro, built on SoC MediaTek MT6737, priced at $ 75
The source had all the details about the budget smartphone Oukitel C5 Pro. The estimated novelty does not have a dual camera, as it is now popular among Chinese manufacturers of smartphones, but in general it meets all the requirements imposed today on models priced at up to $ 100.
Oukitel C5 Pro built on SoC MediaTek MT6737, has 2 GB of RAM and 16 GB of internal flash memory. The device configuration includes cameras with a resolution of 2 and 5 megapixels, Wi-Fi 802.11n and Bluetooth 4.0 adapters, an LTE modem, a 2000 mAh battery and Android OS 6.0. A 5-inch display with a resolution of 1280 x 720 pixels is protected by tempered glass. True, it does not say exactly how.
Despite the low cost, the Oukitel C5 Pro case is not made entirely of plastic - the side frame of the device is metal. The novelty will be offered in four colors.

Useful

TWRP 3.0.3 / ROOT
Rollback from Beta version of Android 7.0 to Android 6.0
Change logo on"Nougat "
Repair IMEI
We remove artifacts and lights on the screen
TWRP 3.0.2

Firmware

Official firmware via SP Flash Tool

OUKITEL C5 PRO V2.1 2017.05.27 Android 6.0
OUKITEL C5 PRO V2.0 2017.04.26 Android 6.0 and
OUKITEL C5 PRO Android 7.0 Beta
Pocket Mirror
Flash Tool + Drivers

Official firmware via TWRP

Firmware (Android 7, Root) under recovery

Unofficial firmware

Elephone C1X port
Resurrection Remix 5.8.3
OctOs 7.1.1
LineageOs-7.1.2
Aosp-Extended v3.3 7.1.1
CrDroid v2.5
EMIU 4.1 Mini
Cleaned stock V2.5

Firmware from our clone DEXP Ixion MS550

Reviews

Video review

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedAmizon1000 - 11.03.18, 05:52

Reason for editing: Cleaned stock V2.5

[AndreyUlianovski]

Good evening everyone. HardReset was made on this device. Please tell me how to bypass Google account verification.

[kashak_v8]

The proximity sensor fell off, calibration through the engineering menu did not work.
Has anyone come across this?

[sufics]

AndreyUlianovski,
//savagemessiahzine.com/ forum / i ... & result = posts & noform = 1

[AndreyUlianovski]

sufics,I have a problem not with logging into Google account, as described in all posts, and the problem is that they forgot the password from Google account, made a reset via hard reset, and did not exit the account. And now requires you to enter the name and password of your Google account. And he is not

[Sam106]

AndreyUlianovski,
Ways to bypass Google account (FRP) after reset (Post Tearm # 47067700)

[Mawrsavagemessiahzine.com]

All good!

Tell me, please, when flashing the FlashTool device, such an error occurs

Is it somehow treated? Or is the memory already dead forever?

Thank!

p.s. made a memory test, it can be clearer what will happen:

============ Memory Detection Report ===========

Internal RAM:


External RAM:

Type = DRAM

Size = 0x80000000 (2048MB / 16384Mb)

NAND Flash:

ERROR: NAND Flash was not detected!

EMMC:

EMMC_PART_BOOT1 Size = 0x0000000000400000 (4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000 (4MB)
EMMC_PART_RPMB Size = 0x0000000000400000 (4MB)
EMMC_PART_GP1 Size = 0x0000000000000000 (0MB)
EMMC_PART_GP2 Size = 0x0000000000000000 (0MB)
EMMC_PART_GP3 Size = 0x0000000000000000 (0MB)
EMMC_PART_GP4 Size = 0x0000000000000000 (0MB)
EMMC_PART_USER Size = 0x00000003ab400000 (15028MB)

UFS:

ERROR: UFS was not detected!

============ RAM Test ============

Data Bus Test:

[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK !!

Address Bus Test:

[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
[A29]
[A30]
OK !!

RAM Pattern Test:
Writing ...
0x44332211,
0xA5A5A5A5,
0xA5A5A500,
0xA500A500,
0xA5000000
0x00000000
0xFFFF0000,
0xFFFFFFFF,
OK !!

Increment / Decrement Test:
Writing ...
OK !!

Post has been editedMawrsavagemessiahzine.com - 23.01.19, 19:37

Reason for editing: added a memory test

[_AI_]

Mawrsavagemessiahzine.com,
what program do you use? there is a topic on the forum about it - ask there (or rather look for the answer yourself)

[sufics]

AndreyUlianovski,
Shay with a full format Th)
Only hemorrhoids with imeyami will be.

[tima_02]

FRP bypass or how to delete google account on Oukitel C5 Pro.
1) Run SP_Flash_Tool
2) Select the scatter file attached to this post.
3) Click the Download agent button and select DA_SWSEC_CRYPTO20.bin
4) go to the format tab
5) Select the manual format, fill in as in the screenshot (begin address 0x6a00000, Format length 0x100000):

6) Press start and connect the switched off phone to the PC
MT6737M_Android_scatter.rar(1.1 KB)

[WARASHA]

Hello everyone, I have never found a video with changing the touchscreen on this animal, can anyone have experience in this business, share pliz, interested in the complexity of the process and the nuances, thanks in advance.

[trollrus]

How to deal with stripes on the screen? MiraVizion partially solves this problem.

Post has been editedtrollrus - 20.02.19, 20:19

[13EX]

I welcome, but how to install the recovery? I do not find instructions.

[sufics]

13EX,
theme hat
Oukitel C5 Pro - Discussion (Post by jemmini # 58483009)

Oukitel C5 Pro - Discussion (Post hecatenet # 58182473)

Post has been editedsufics - 27.02.19, 10:01

[LinkSpb]

Trollrus @ 02.20.19, 20:17

How to deal with stripes on the screen? MiraVizion partially solves this problem.

Polish firmware solves. Only when turned on, it remains.

[LinkSpb]

WARASHA @ 02/10/19, 17:44

Hello everyone, I have never found a video with changing the touchscreen on this animal, can anyone have experience in this business, share pliz, interested in the complexity of the process and the nuances, thanks in advance.

Yes, everything is as usual. Hair dryer, scotch

[LinkSpb]

Trollrus @ 02.20.19, 20:17

How to deal with stripes on the screen? MiraVizion partially solves this problem.

I do not care about strips when turned on, then everything works and besides android 7.

[trollrus]

LinkSpb @ 03/03/19, 21:38

Polish firmware solves.

What is the "Polish firmware"? Stick your nose. : sveta:: sorry:

Post has been editedtrollrus - 04.03.19, 10:02

[Rudekay]

All good. When flashing, errors constantly emerge (screenshots under the spoiler). He himself was stupid, inadvertently trying to install the firmware from a completely different device, barely making his way through the errors, installed his own. But now with any firmware, these errors crawl out and do not give anything to do (no more firmware is installed), and the native firmware turned out to be buggy. I tried through different usb cables, nothing changes. Can you please suggest a solution? Or now everything, before the blue in the face try to break through the mistakes?

Errors

[LinkSpb]

Trollrus @ 03/04/19, 10:02

Polish firmware decides. What is the "Polish firmware"? Stick your nose.

https://mega.nz/#F!G8t…NMLjBlDFQ7HoDRyJsW9kyg

[mrmr12]

Hello everyone, when I flashed a high error, and the computer does not see the port, who knows how to turn on the emergency port?