Assistant
REPLY |
Orange PI Lite - discussion | [SBC] Orange PI Lite Talk |
Message#1 27.12.16, 21:32 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 123 Check in: 18.03.16 Apple iPhone 6s Plus Reputation: 2 | Orange Pi PC 2 | Orange pi zero | Orange pi lite | Orange pi prime | Orange Pi Plus | Orange Pi 2G-IOT | Orange Pi Zero Plus 2 | How do I get an Orange Pi? Orange pi lite Specifications Common parameters Model ORANGE PI LITE Color blue CPU ARM processor manufacturer Cortex-A7 processor model The number of processor cores 4 Processor frequency 1200 MHz RAM The size of RAM 512 MB Data storages No built-in flash memory available Video card AllWinner video chip manufacturer Model of video chip Mali400 MP2 Interfaces, connectors HDMI video interfaces Audio interfaces 3.5 mm jack (audio) Interfaces micro USB, USB 2.0 Communications Type of Internet access Wi-Fi Software Installed operating system without OS Additional Information Optional embedded MMC slot Features Wi-Fi module Dimensions 69 mm length Width 48 mm Post has been editedstp101 - 30.06.18, 13:30 Reason for editing: Detailed guide to activating the control from the infrared remote on H3droid 1.3.4 |
Message#322 07.03.19, 18:43 | |
Visitor [offline] Group: Active users Messages 15 Check in: 29.08.13 Reputation: 0 | Good day, ladies and gentlemen. Tell me, please, in this question. Is it possible to screw the cameras from the machines to the oranges? |
Message#323 16.03.19, 00:26 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 278 Check in: 15.05.09 Xiaomi Mi Mix 2S 6/128 Reputation: 27 | |
Message#324 18.03.19, 19:21 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 134 Check in: 09.10.13 Reputation: 23 | DrDexter Manually slip fex from Pi PC and edit it under Pi Lite to work wi-fi, do I understand correctly? // UPD. in general, got his hands to the orange. The config was not a curve (in my understanding of the "curve" meant something else), it wasn’t necessary to replace anything. Remote earned, though different. But Linux would not be Linux if everything were so simple. In my case, the layout of sunxi-ir.kl was somehow completely ignored and the console was defined as some kind of super keyboard with 250 keys. That is, I parsed the keys, assigned the numbers to the actual numbers, but when I press the buttons, it’s not what you need to press: all sorts of F6, brackets and other game. I stumbled, I thought that the layout was taken from the file Generic.kl, but after replacing it with my layout, the console simply does not respond to commands. Still files are sensitive to permissions, but in my case, if I ask the right ones, it does not give anything. In short, spat and set up lirc. With lirc, too, not everything is simple, but at least it works correctly. I just can't find the command for the HOME keys and for the list of running applications in android, how can they be called? KEY_HOME doesn't fit, just HOME too .. Post has been editedtruumann - 29.03.19, 10:20 |
Message#325 18.03.19, 22:53 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 278 Check in: 15.05.09 Xiaomi Mi Mix 2S 6/128 Reputation: 27 | No, take fex OPiLite and edit just the line: [s_cir0] ir_used = 0 change ir_used from 0 to 1 -------------------- Xiaomi Mi Mix 2S, Pipo M9 Pro, Explay Tornado, LG GPad 10.1 "V700, Moto G4 +, Lenovo Tab 4 10" |
Message#326 25.03.19, 18:14 | |
Visitor [offline] Group: Active users Messages 15 Check in: 15.01.15 Reputation: 0 | All the best of the day! Orange pi lite 2 got launched I downloaded the source for it, but who can click into the link, how can I unzip it? (Under Windows) |
Message#327 26.03.19, 06:11 | |
Magos biologis [online] Group: Developers Messages 11806 Check in: 05.05.13 Huawei MediaPad 7 Vogue S7-601u, S7-602u Reputation: 1041 | [email protected], 12:14 What prog and how can I get Root? No. What for? Insert the card into the reader, mount the system partition, write su for ARM in xbin and set it suid bit Post has been editedAzathtot - 26.03.19, 06:43 -------------------- Order. Unity. Obedience. |
Message#328 26.03.19, 06:44 | |
Magos biologis [online] Group: Developers Messages 11806 Check in: 05.05.13 Huawei MediaPad 7 Vogue S7-601u, S7-602u Reputation: 1041 | [email protected], 12:14 how can this be unzipped? (under Windows) But under Windows it is not necessary to touch. The last thing you need to work with single-board is Windows -------------------- Order. Unity. Obedience. |
Message#329 26.03.19, 07:50 | |
a guest [offline] Group: Users Messages 7 Check in: 28.10.14 Huawei U8950D Ascend G600 Reputation: 0 | No. What for? Insert the card into the reader, mount the system partition, write su for ARM in xbin and set it sudid bit Please describe this whole process in more detail. I will be very grateful to you. Ruth managed to get a kingoroot through the PC, after rebooting the pipets the root flies. |
Message#330 26.03.19, 07:53 | |
Magos biologis [online] Group: Developers Messages 11806 Check in: 05.05.13 Huawei MediaPad 7 Vogue S7-601u, S7-602u Reputation: 1041 | |
Message#331 26.03.19, 17:33 | |
a guest [offline] Group: Users Messages 7 Check in: 28.10.14 Huawei U8950D Ascend G600 Reputation: 0 | so what's more something inserted the card into the reader, mounted the partition, threw the file, made him chmod u + s. Naturally need a computer with Linux Dear Azathtot, this is simple for you, but I am not strong in linux. Still, thank you for the tip, I will study the materiel. |
Message#332 10.04.19, 01:56 | |
a guest [offline] Group: Users Messages 8 Check in: 25.09.16 Thl 5000 Reputation: 0 | There is no information on the OrangePi Lite2 in the subject, so I'll try to add it myself. Installing Ubuntu Server 18.04 Onoff sitethere is only version 16.04 so far, and we will use it. Swingingform, unpack, write to the USB flash drive via balenaEtcher. Any Ext4 file manager (I use ext2fsd) connect to the flash drive I just recorded, we configure Wi-Fi We add the file wlan0 to the directory /etc/network/interfaces.d/ allow-hotplug wlan0 iface wlan0 inet dhcp wpa-ssid SSID wpa-psk PASS We load the board with our flash drive and wait, the first boot lasts ten minutes, then it starts in a couple of seconds, we connect via SSH Increase partition / dev / mmcblk0p2 By default, there will be no free space in the system, this needs to be fixed. We look at the source data: root @ OrangePi: ~ # df -h Filesystem Size Used Avail Use% Mounted on / dev / mmcblk0p2 ** G ** G ** G 99% / � Recreate section In the first command "p" it is necessary to pay attention to the first sector of the mmcblk0p2 section, it may differ and will need further root @ OrangePi: ~ # fdisk / dev / mmcblk0 � Command (m for help): p � Device Boot Start End Sectors Size Id Type / dev / mmcblk0p1 40960 143359 102400 50M with W95 FAT32 (LBA) / dev / mmcblk0p2 143360 2457599 2314240 1.1G 83 Linux Command (m for help): d Partition number (1,2, default 2): 2 Partition 2 has been deleted. Command (m for help): n Partition type p primary (1 primary, 0 extended, 3 free) e extended (container for logical partitions) Select (default p): p Partition number (2-4, default 2): 2 First sector (2048-31116287, default 2048): 143360 Last sector, + sectors or + size {K, M, G, T, P} (143360-31116287, default 31116287): Created a new partition 2 of type 'Linux' and of size 14.8 GiB. Command (m for help): w The partition table has been altered. Calling ioctl () to re-read partition table. Re-reading the partition table failed .: Device or resource busy The kernel still uses the old table. Rerouting or after you run partprobe (8) or kpartx (8). root @ OrangePi: ~ # init 6 root @ OrangePi: ~ # resize2fs / dev / mmcblk0p2 resize2fs 1.42.13 (17-May-2015) Filesystem at / dev / mmcblk0p2 is mounted on /; on-line resizing required old_desc_blocks = 1, new_desc_blocks = 1 The filesystem on / dev / mmcblk0p2 is now 3871616 (4k) blocks long. See the result root @ OrangePi: ~ # df -h Filesystem Size Used Avail Use% Mounted on / dev / mmcblk0p2 15G 984M 13G 7% / � We update the system To update, you need a little more free space in the / boot section than the existing 19MB, but in order not to bother with the expansion of this section - you can simply clean it up correctly apt-get update && apt-get upgrade apt install update-manager-core mkdir / root / boot / mv / boot / * / root / boot / do-release-upgrade mv / root / boot / * / boot / init 6 The update takes about an hour, there will be several warnings about the undesirability of using SSH with this update, as well as the question of the Cyrillic requirement, nothing complicated. Check the result: root @ OrangePi: ~ # cat / etc / * release * DISTRIB_ID = Ubuntu DISTRIB_RELEASE = 18.04 DISTRIB_CODENAME = bionic DISTRIB_DESCRIPTION = "Ubuntu 18.04.2 LTS" NAME = "Ubuntu" VERSION = "18.04.2 LTS (Bionic Beaver)" Id = ubuntu ID_LIKE = debian PRETTY_NAME = "Ubuntu 04/18/24 LTS" VERSION_ID = "18.04" HOME_URL = "https://www.ubuntu.com/" SUPPORT_URL = "https://help.ubuntu.com/" BUG_REPORT_URL = "https://bugs.launchpad.net/ubuntu/" PRIVACY_POLICY_URL = "https://www.ubuntu.com/legal/terms-and-policies/privacy-policy" VERSION_CODENAME = bionic UBUNTU_CODENAME = bionic |
Message#333 10.04.19, 03:10 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1701 Check in: 24.03.10 Lenovo A830 Reputation: 241 | |
Message#334 10.04.19, 03:16 | |
a guest [offline] Group: Users Messages 8 Check in: 25.09.16 Thl 5000 Reputation: 0 | Vyacheslav-S, Armbian is not listed on the orangepi off site, it also has problems like a random MAC address, although it didn’t check it, it took information from the pagearmbian |
Message#335 10.04.19, 05:17 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1701 Check in: 24.03.10 Lenovo A830 Reputation: 241 | |
Message#336 14.04.19, 12:31 | |
FiveGFox [offline] Group: Curators Messages 1655 Check in: 24.06.12 Huawei P10 Lite WAS-LX1 Reputation: 280 | Greetings to all. Not so long ago, Orange Pi Lite finally bought itself (there was a desire for a long time, but there were no ideas where to attach it. Now it lives on a 3D printer). I stuck armbian and everything seems fine, but sometimes there is a hang-up ssh (typing or moving the cursor the hop hangs. It doesn't move. Then it hangs down and even prints or moves the cursor). These hangs are annoying. There was a thought that the matter is in the ssh server itself. But this is not only with ssh, but when pinging, some packages are either lost or have a ping of 500-2000ms. Who has any thoughts on this matter? It's not the first day in Linux (and already 7 years old), but I haven't seen such a joke yet ... iwconfig wlan0 IEEE 802.11bgn ESSID: "HOME" Nickname: "<WIFI @ REALTEK>" Mode: Managed Frequency: 2.447 GHz Access Point: 88: 5D: 90: E0: D9: 4F Bit Rate: 72.2 Mb / s Sensitivity: 0/0 Retry: off RTS thr: off Fragment thr: off Power Management: off Link Quality = 89/100 Signal level = 88/100 Noise level = 0/100 Rx invalid nwid: 0 Rx invalid crypt: 0 Rx invalid frag: 0 Tx excessive retries: 0 Invalid misc: 0 Missed beacon: 0 ping orange pishki PING 192.168.1.99 (192.168.1.99) 56 (84) bytes of data. 64 bytes from 192.168.1.99: icmp_seq = 1 ttl = 64 time = 1.99 ms 64 bytes from 192.168.1.99: icmp_seq = 2 ttl = 64 time = 1.77 ms 64 bytes from 192.168.1.99: icmp_seq = 3 ttl = 64 time = 1.80 ms 64 bytes from 192.168.1.99: icmp_seq = 4 ttl = 64 time = 1.75 ms 64 bytes from 192.168.1.99: icmp_seq = 5 ttl = 64 time = 3.27 ms 64 bytes from 192.168.1.99: icmp_seq = 6 ttl = 64 time = 2.32 ms 64 bytes from 192.168.1.99: icmp_seq = 7 ttl = 64 time = 1.80 ms 64 bytes from 192.168.1.99: icmp_seq = 8 ttl = 64 time = 739 ms 64 bytes from 192.168.1.99: icmp_seq = 9 ttl = 64 time = 1.75 ms 64 bytes from 192.168.1.99: icmp_seq = 10 ttl = 64 time = 3.31 ms 64 bytes from 192.168.1.99: icmp_seq = 11 ttl = 64 time = 3.86 ms 64 bytes from 192.168.1.99: icmp_seq = 12 ttl = 64 time = 1.90 ms 64 bytes from 192.168.1.99: icmp_seq = 13 ttl = 64 time = 1.84 ms 64 bytes from 192.168.1.99: icmp_seq = 14 ttl = 64 time = 1.77 ms 64 bytes from 192.168.1.99: icmp_seq = 15 ttl = 64 time = 1.76 ms 64 bytes from 192.168.1.99: icmp_seq = 16 ttl = 64 time = 1.87 ms 64 bytes from 192.168.1.99: icmp_seq = 17 ttl = 64 time = 1.84 ms 64 bytes from 192.168.1.99: icmp_seq = 18 ttl = 64 time = 2.03 ms 64 bytes from 192.168.1.99: icmp_seq = 19 ttl = 64 time = 2.24 ms 64 bytes from 192.168.1.99: icmp_seq = 20 ttl = 64 time = 1.77 ms 64 bytes from 192.168.1.99: icmp_seq = 21 ttl = 64 time = 2.56 ms 64 bytes from 192.168.1.99: icmp_seq = 22 ttl = 64 time = 2.10 ms 64 bytes from 192.168.1.99: icmp_seq = 23 ttl = 64 time = 1.81 ms 64 bytes from 192.168.1.99: icmp_seq = 24 ttl = 64 time = 2.03 ms 64 bytes from 192.168.1.99: icmp_seq = 25 ttl = 64 time = 2.63 ms 64 bytes from 192.168.1.99: icmp_seq = 26 ttl = 64 time = 1.97 ms 64 bytes from 192.168.1.99: icmp_seq = 27 ttl = 64 time = 1.92 ms 64 bytes from 192.168.1.99: icmp_seq = 28 ttl = 64 time = 1.81 ms 64 bytes from 192.168.1.99: icmp_seq = 29 ttl = 64 time = 1.75 ms 64 bytes from 192.168.1.99: icmp_seq = 30 ttl = 64 time = 1.86 ms 64 bytes from 192.168.1.99: icmp_seq = 31 ttl = 64 time = 1.77 ms 64 bytes from 192.168.1.99: icmp_seq = 32 ttl = 64 time = 1.84 ms 64 bytes from 192.168.1.99: icmp_seq = 33 ttl = 64 time = 3.26 ms 64 bytes from 192.168.1.99: icmp_seq = 34 ttl = 64 time = 27.2 ms 64 bytes from 192.168.1.99: icmp_seq = 35 ttl = 64 time = 1.78 ms 64 bytes from 192.168.1.99: icmp_seq = 36 ttl = 64 time = 1.77 ms 64 bytes from 192.168.1.99: icmp_seq = 37 ttl = 64 time = 2.83 ms 64 bytes from 192.168.1.99: icmp_seq = 38 ttl = 64 time = 1.78 ms 64 bytes from 192.168.1.99: icmp_seq = 39 ttl = 64 time = 1334 ms 64 bytes from 192.168.1.99: icmp_seq = 40 ttl = 64 time = 334 ms 64 bytes from 192.168.1.99: icmp_seq = 41 ttl = 64 time = 1.80 ms 64 bytes from 192.168.1.99: icmp_seq = 42 ttl = 64 time = 3.02 ms 64 bytes from 192.168.1.99: icmp_seq = 43 ttl = 64 time = 1.85 ms 64 bytes from 192.168.1.99: icmp_seq = 44 ttl = 64 time = 1.81 ms 64 bytes from 192.168.1.99: icmp_seq = 45 ttl = 64 time = 1.74 ms 64 bytes from 192.168.1.99: icmp_seq = 46 ttl = 64 time = 1.67 ms 64 bytes from 192.168.1.99: icmp_seq = 48 ttl = 64 time = 54.9 ms 64 bytes from 192.168.1.99: icmp_seq = 49 ttl = 64 time = 1.92 ms 64 bytes from 192.168.1.99: icmp_seq = 50 ttl = 64 time = 1.79 ms --- 192.168.1.99 ping statistics --- 50 packets transmitted, 49 received, 2% packet loss, time 49032ms rtt min / avg / max / mdev = 1.678 / 52.696 / 1334.270 / 216.966 ms, pipe 2 Post has been editedTimofey777 - 14.04.19, 12:36 -------------------- Huawei P10 Lite Android 8 |
Message#337 17.04.19, 14:55 | |
Visitor [offline] Group: Active users Messages 15 Check in: 15.01.15 Reputation: 0 | For the Pine 64H card, the image of Libreelec appeared - it didn’t become on orange light 2, but it can be creatively podshamanit - the same percent, through percent, there will be no built-in Wi-Fi is also not critical ... |
mobile version | Now: 01/05/19, 07:31 |