Instruction [1] Download and install the USB drivers on your computer.
[2] Download and unzip the firmware file to the root drive of your PC (any) to the folder with the Latin name.
Folder name must NOT contain Russian letters or characters .
[3] Download FlashTool, which cap and extract the archive to the root drive of your PC (any) to the folder with the Latin name.
Folder name must NOT contain Russian letters or characters .
[4] Run raspakovanom program renee
Flash_tool.exe [5] Press
Scatter-Loading , go to the folder with the firmware and select the file
MT6580_Android_scatter . In the case of posts Icorrect scatter File format - check the name of the packs proshivalschika (as short as possible with Latin letters.
[6] proceed in
options-option Further tab
Download and tick opposite
USB Checksum and Storage Checksum and close the Preferences window.
7.Dalee choose on the main window
Firmware upgrate .
8.Telefon must be switched off
(Take out the SD card and SIM card) , Juggle battery (pull out and insert it if it is turned on immediately, remove the battery for a few minutes, and then insert)
9.Zhmom
Download 10.Teper we press the volume key
minus - and connect USB to the phone as soon as lighted red strip, release the volume key, and wait until the phone proshotsya.
11. When will light green circle, we can safely disconnect the phone from the USB and turn it on.
12.After the first time the phone firmware runs in
for 4-7 minutes So do not be afraid when the phone is switched on for a long time.