[X]Assistant

[U-ENERGYoff]

Alcatel Pixi 4 (4.0) OT-4034D - Firmware (OS 6.0. *)
OT-4034D Pixi 4
Description | Discussion пїЅ | Owners Club пїЅ | games and apps пїЅ | CyanogenMod / LineageOS firmware пїЅ | Firmware (OS 6.0. *) пїЅ

Important information!

====================
Attention! Firmware is a vulnerable part of the device.
Any wrong action when flashing
(power supply interruption, firmware install from damaged media)
can significantly affect its performance.
---
Remember!
Neithersavagemessiahzine.com, neither the author of the firmware, nor the author of the topic, and in general -
No one except you is responsible for
Your actions. You must know clearly what you are.
do and what, at least approximately, will be
result. If you doubt your own
abilities - transfer the case to the hands of a specialist
in your area (visit the service center).
====================

Drivers and Utilities

FlashTool download

- utility for firmware recovery, backups and more.
Mobile Upgrade S- official flasher
Flashtool driver- in case you fail to flash the phone using Flashtool

Official firmware

Version 01001- installed from any backup
Version 01002- installed from Mobile Upgrade S
Version 01004- installed using FlashTool

Firmware for new revisions 2AALRUA

Custom firmware

Modified stock:
These firmware are official modifications that allow you to feel the desired functions while retaining all the functionality of the device. As a rule, such firmware is made only by amateurs.

• ROM STOCK
  
• Alcatel mod dimkin_76
  

Ports from other devices:
Stock or modified firmware ported from other devices. Usually you need to bring to your phone interesting features from another. There is a high chance that such firmware will not start, or it will not work correctly.

• TouchWiz Android 6.0 (7.0)
  
• BMOBILE AX685 PORT PIXI 4
  
• CM13 PORT + STRATUM OS PORT + GO502HD PORT + BLU NEO X PORT + BMOBILE 685 PORT + DOOGEE X6 PORT
  

More firmware

Instructions

• To boot into Recovery mode, you must hold down the Power and Volume + keys when turned off.
  
• Fastboot mode is loaded using the special Recovery mode feature.

Instructions for installing firmware
Device firmware
Opening Root rights
Getting Root
TWRP Installation Instructions
Install Xposed
PhhSuperuser replaced by SuperSU via TWRP
The return of the Russian language in foreign firmware
Repair IMEI

miscellanea

пїЅRecovery:
TWRP 3.2.3 for TCL 4034D
TWRP 3.0.2
TWRP 3.1.0.0
CTR 6.6

пїЅRuth:
Getting #Root
SuperSU PRO

пїЅKernels:
KERNEL PIXI 4 (4034)

пїЅBackups / dumps:
пїЅFull ROM-backup
пїЅBackup dated 8/20/16fromZagadnik
(Security Update: March 1, 2016) (Kernel Version: 3.18.19+) (Build Number: 01001)
Installation: ThroughSP FlashTool
пїЅBackup dated 12/10/16fromKEKEKEX16
(Android 6.0, Marshmallow) (Kernel version: 3.18.19+) (Build number: 01001)
Installation: Through TWRP

Ways to untie the phone from the Google account:Time (+Video), two (+option without pc), three, four (without pc) and five (with pc)
We take out the phone from the state of the brickthankvirtysn

Screenshots

There is no curator in the subject. For questions about filling caps, please contactTopic Starteror tosection moderators.

Post has been editedsnekt - 20.03.19, 23:48

Reason for editing: Opening Root rights

[vdelva]

I will add that both in the store and in the service center they also reset to the factory ones, it did not help. Hangs up at initial setting.

[U-ENERGYoff]

serkon1957 @ 24.12.16, 14:42

Or nevertheless, at your own risk

Why do not you like to flash? There is no fear and risk here. In general, and even if you grab a brick (you never know, there is a mustache in life), that is, as many as 3 backups, they are easily placed!

[serkon1957]

U-ENERGYoff @ 24.12.16, 22:13

Why do not you like to flash?

If the smartphone works and suits the owner, I do not see any reason to flash it, this is the first. As experience shows, new jambs appear with new firmware (with rare exceptions, run-in stable office or custom), and I don’t like to waste time on experiments, With regards to the body, it is expensive for me to work, and even the functionality of this firmware is not pleasant, it means again to sew, this is the second. (BAP is not at all). Backup before installing, it is better to check whole (personal experience: dumped the backup on the computer, it was damaged, it is good that it was not needed). A newbie should be advised to take up the firmware right away, I wouldn’t become. when flashing, note that resetting to “factory” is the most innocuous and sometimes effective way to return the device to full functionality — this is a third. Yes, from a phone from TWRP without any problems, you can flash it; what wipes do but anyway for A beginner is advised to do a "factor reset".

[U-ENERGYoff]

serkon1957 @ 25.12.16, 14:31

As experience shows, new jambs appear with new firmware (with rare exceptions, run-in stable office or custom), and I don’t like to spend time on experiments on the body, it’s expensive for me to work, and even the functionality of this firmware isn’t like it, then again sew is the second.

Nothing of the kind, all official firmware are stable!

serkon1957 @ 25.12.16, 14:31

To stitch from a smart phone and from a computer, there is a difference: from a computer, you need to be sure that they will not turn off the light during the firmware (not everyone has a BAP).

We do not kill the phone programmatically (unless, of course, formatting the bootloader). And if they turn it off, why can't it be restored by backup, in the cap there are 2 of them (I will add 3 soon)?

serkon1957 @ 25.12.16, 14:31

Backup before installation, it is better to check for integrity (personal experience: dumping the backup on the computer, it was damaged, it is good that it was not needed).

And what you do not like backups from the caps? Why make them yourself if there are backups already tested in the header?

serkon1957 @ 25.12.16, 14:31

And I would advise the newcomer to immediately take up the firmware, I would not

Well yes. Although, if a beginner understands anything, even imagines the process itself, then why not? After all, the flashing process is fully automated using Mobile Upgrade S.

serkon1957 @ 25.12.16, 14:31

In the themes about different devices, full of cries for help in the restoration of bricks from errors during firmware

Phone do not kill software

serkon1957 @ 25.12.16, 14:31

reset to the "factory", it is the most innocuous and sometimes effective way to return the full functionality of the device is the third.

You can only achieve full functionality in 5/10 cases (from strength), the wipe only erases the data section, and more than half of the problems are hidden in the system

serkon1957 @ 25.12.16, 14:31

Yes, from the phone from TWRP-without any problems, you can flash, while for normal flashing you need to know which wipes to do, but still for a beginner they are advised to do a "reset factor".

With TWRP, the process is easy to automate, and we don’t have any firmware except a buggy syanogen.

[serkon1957]

U-ENERGYoff @ 25.12.16, 15:53

Nothing of the kind, all official firmware are stable!

I didn’t write about stability, I wrote about jambs! We don’t have that, because there was only one update, but go to the topic, at least about Nubiyumini (its owner itself), fix one (if they fix it) spoil it.

U-ENERGYoff @ 25.12.16, 15:53

And what you do not like backups from the caps? Why make them yourself if there are backups already tested in the header?

I wrote, not specifically about our model and not about our backups, but about my experience.

U-ENERGYoff @ 25.12.16, 15:53

you can achieve full functionality in only 5/10 cases.

Even in 5 successful cases, it will be a victory with little blood, which makes it difficult to then flash it if there are others 5.

U-ENERGYoff @ 25.12.16, 15:53

We don’t have any firmware for it except for a buggy syanogen.

And this confirms my first thought. And also, why do we need it at all in a hat, if it is buggy. There will be a normal, proven cast, then yes, let everyone try.

U-ENERGYoff @ 25.12.16, 15:53

We do not kill the phone programmatically (unless, of course, format the bootloader)

And you tell those who shouted about bricks and help on our forum. It is very interesting how they brought their devices to such a state. Not exactly a reset!

[rogermetal]

U-ENERGYoff,You wrote that you will soon add a third backup, then be a friend immediately updated to 01002.

[vdelva]

If TWRP stood already, then it would restore it from the backup. And so it makes sense to put TWRP, just to restore? The remaining features are not needed yet, and the warranty is lost, as I understand it.

Is there any firmware for firmware via native recovery or ADB?

[serkon1957]

Vdelva @ 12.26.16, 08:16

and the warranty is lost, as I understand it.

TWRP is more convenient for any regular recovery, and it’s also functional. And to switch back to stock (because of the fear of losing the guarantee), there are no problems either!

Vdelva @ 12.26.16, 08:16

Is there any firmware for firmware via native recovery or ADB?

And you already asked this, will you duplicate the same question on every page?

[kazievnurik1993]

Please tell me how to install twrp recovery on the device, if I can not go into it requires Google account

Posted 12/27/2016 6:41 PM:

Can I install twrp recovery through stock recovery without connecting to a PC

[musa123]

Disconnected Google account FRP reset checked everything you need in the archive and the instructions for the instructions above could not be done adb was not included in the recovery

Attached files

4034D FRP.rar(25.21 MB)


Post has been editedmusa123 - 27.12.16, 18:54

[serkon1957]

kazievnurik1993 @ 12.27.16, 19:37

Please tell me how to install twrp recovery on the device

In the header instruction!

kazievnurik1993 @ 12.27.16, 19:37

Can I install twrp recovery through stock recovery without connecting to a PC

Not.

[U-ENERGYoff]

Attention! There are a lot of requests to install recovery without a PC! Request to everyone to trythese utilities and unsubscribe about the results:

• MobileUncle Tools
  
• Tool hero

The list can be replenished if the above applications will not work.

Post has been editedU-ENERGYoff - 27.12.16, 20:02

[serkon1957]

U-ENERGYoff @ 27.12.16, 20:58

MobileUncle Tools

This utility without root rights does not work fully from the beginning.

[U-ENERGYoff]

serkon1957,So what about without the root of the rights to put the recovery at all?

[serkon1957]

U-ENERGYoff @ 27.12.16, 20:58

Tool hero

I did not try this, but I think that the root of the law is necessary (in the comments to this utility, this is said). PS.-IMHO all utilities aimed at changing the system. section (and not only) require root rights.

[U-ENERGYoff]

serkon1957 @ 27.12.16, 20:57

Ps-IMHO all utilities aimed at changes in the system. section (and not only) require root rights.

It really is. But, since you have only now reached this point, I can assume that you do not fully know "what is root" ...

Post has been editedU-ENERGYoff - 27.12.16, 21:01

[serkon1957]

U-ENERGYoff @ 27.12.16, 21:52

So what about without the root of the rights to put the recovery at all?

With the help of the company, you don’t know. The cap was written.

Posted 12/27/2016 21:04 PM:

U-ENERGYoff @ 27.12.16, 22:00

"what is root".

This knowledge is enough for me to customize my device, but for the most I do not pretend.

[U-ENERGYoff]

serkon1957,This is yes, but we were talking about the "no pc" way: scratch_one-s_head:

Posted on 12/27/2016 21:06:

serkon1957 @ 27.12.16, 21:01

This knowledge is enough for me to customize my device, but for the most I do not pretend.

Hmm ... And I learned about it because of my curiosity)

[serkon1957]

U-ENERGYoff,
In general, people want to install TWRP without a computer, but I don’t know such a method (maybe you will find it), and without TWRP, you won’t get a root (maybe you know another way?).

[U-ENERGYoff]

serkon1957,So for those people it is impossible, it can be done only by those who have a computer (flash recovery, install root, flash recovery back). Logics!