147 pagesV  « < 140 141 142 143 144 145 > »  
 
REPLY
> TP-Link TL-WR840N - Discussion | [wifirouter] Discussion
ivan2280
Message#1
04.10.16, 20:35
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 682
Check in: 11.12.15
Google nexus 5

Reputation:-  19  +

TP-Link TL-WR840N - Discussion



A photo:
TL-WR840N V1
Attached Image
TL-WR840N V2
Attached ImageAttached Image

Description:
We need to start with the fact that TP-LINK TL-WR840N is exclusively a router for a small home or office. If you need to organize the distribution of the Internet via Wi-Fi and cable, say, more than 10 devices, and constantly download something, play online games, and perform other complex tasks, then you need a more powerful router. For example, as an option, you can watch TP-LINK Archer C20i, which also supports Wi-Fi 5 GHz.

This router without problems will distribute the Internet to several devices via Wi-Fi, and via a network cable. Judging by the information on the box, it can withstand online games, file downloads, etc. But you need to understand that everything is in moderation. If you run some heavy games on several computers at the same time, then most likely it will not withstand this load. If such budget models could cope with all the tasks, then who would buy a router that costs ten or more times more.

Specifications:
v.1
Wireless standard - 802.11n, 2.4 GHz frequency
MIMO support - is
Max. 300 Mbps wireless speed
Reception / Transmission
Information Security - WEP, WPA, WPA2
Transmitter power - 20 dBM
Access Point / Bridge Options

Switch - 4xLAN
Port speed - 100 Mbps
WDS technology support - is
Bridge mode - is

Router

Firewall (FireWall) - is
NAT - there is
SPI - is
DHCP server is
Dynamic DNS support - there is
DMZ - have
Static routing - is

VPN

VPN pass through support - is
PPTP support
Support - L2TP is
Support - IPSec

Antenna

The number of internal antennas - 2

Monitoring and Configuring

Web interface is

Additionally

Dimensions (WxHxD) 182x35x128 mm

v.2
HARDWARE CHARACTERISTICS
Interface 4 LAN ports 10/100 Mbps
1 10/100 Mbps WAN port
Buttons WPS / Reset Button
Antenna 2 fixed 5 dBi antennas
(only for hardware version 2)
External power supply 9 VDC current / 0.6 A
Standards of wireless data transmission IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Dimensions (WxLxH) 182 x 128 x 35 mm
PARAMETERS OF WIRELESS MODULE
Frequency range (receive and transmit) 2400-2483.5 MHz
11n transfer speed: up to 300 Mbps (dynamic)
11g: up to 54 Mbps (dynamic)
11b: up to 11 Mbps (dynamic)
Sensitivity (reception) 270 Mbps: -68 dBm with 10% PER
130 Mbps: -68 dBm with 10% PER
108 Mbps: -68 dBm with 10% PER
54 Mbps: -68 dBm with 10% PER
11 Mbps: -85 dBm with 8% PER
6 Mbps: -88 dBm with 10% PER
1 Mbps: -90 dBm with 8% PER
EIRP (Wireless Power)<20 dBm or<100 mW
Wireless Features Enable / Disable Wireless Broadcast, WDS Bridge, WMM, Wireless Statistics
Wireless Security 64/128/152-bit WEP / WPA / WPA2, WPA-PSK / WPA2-PSK

Useful links:
Firmware

Discussion of other topics besides the key is not prohibited, but not welcome.
Attention!!! I don’t need to ask me questions about the firmware / router / why it stopped working, etc.
For filling / editing caps writehere.
If I do not answer within 24 hours, then write totelegram.


Post has been editedivan2280 - 08.11.18, 01:19
Reason for editing: slightly edited cap
raddyst
Message#2822
02.03.19, 18:40
a guest
*
[offline]

Group: Users
Messages 1
Check in: 06.10.13

Reputation:-  0  +

Lipton_lan @ 04.26.17, 11:06*
wr840nv4_lede.bin.zip (3.38 MB)

I can’t assign my MAC address to wan & wan6, only it changes to lan.
kolosok_ev
Message#2823
07.03.19, 09:31
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 61
Check in: 20.12.17

Reputation:-  12  +

Highxxx @ 03/01/19 16:12*
or someone will say criticism ...
mwan3 will not hurt you;)
edelveis35
Message#2824
07.03.19, 11:39
Visitor
**
[offline]

Group: Users
Messages 12
Check in: 24.02.19

Reputation:-  0  +

Since yesterday, forkplayer has stopped working through a dns shift. Checked - DNS is blocked. I call the provider, says that they do not block. Tell me how to make a local DNS on the router? Router tp-link 840 is not a newer version (he is 2 years old), Yandex DNS did not find in it, there is nothing to disable
rhianonte
Message#2825
07.03.19, 13:47
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 90
Check in: 27.10.13
Xiaomi Redmi 3S

Reputation:-  0  +

* edelveis35,
Banning the response from third-party DNS is a normal practice of long-haul and major providers. Those. If the conductor buys a channel from such a highway, the naturally left-handed dns will not work. Made to prevent bypassing locks because For this very pedal brains up to the UK. Accordingly, raising your own local dns in the case of a fork will not help you since The request is sent to the DNS of the player, which returns exactly the desired content. Raising a local dns will bring simplicity to the fact that you will bypass the blocking of your dip by dns-name, but your dns does not know the conversion rules to get the necessary content.
Here either raise vpn or bgp routes (but they do not shine to the ordinary user)

Post has been editedrhianonte - 07.03.19, 13:49


--------------------
r3s miui.su 8.3.29
r4 miui.su stable
Valery-21
Message#2826
07.03.19, 22:52
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 235
Check in: 02.03.13

Reputation:-  8  +

Since yesterday, forkplayer has stopped working through a change of dns
If the telly samsung (tizen), then the substitution dns is not stable. You need to install through the program Tizen Studio.
I apologize for oftop.

Post has been editedValery-21 - 07.03.19, 22:53
edelveis35
Message#2827
07.03.19, 23:03
Visitor
**
[offline]

Group: Users
Messages 12
Check in: 24.02.19

Reputation:-  0  +

* Valery-21, LG Webos TV, I will try to install forkplayer through the developer's IDE
TE8T
Message#2828
09.03.19, 23:40
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 118
Check in: 04.11.13

Reputation:-  2  +

Good day comrades. For technical reasons, it is not possible to assemble the firmware for the WR840 v4.There are current owners of wr840 v4 ?!Share Lede or Padavan firmware with Iptv + Vlan 802.1q support tagging, igmpsnopingproxy v2. GodbyeDPI / Zapret-Bolvan to bypass locksILV.

Prior to installing Lede, Beeline-Internet was the home carrier firmware.

Firmware Version: 0.9.1 3.16 v0283.0 Build 170519 Rel.40906n

Equipment Version: TL-WR840N v4 00000004

I installed the firmware through the Web interface from the postTP-Link TL-WR840N - Discussion (Post Lipton_lan # 60840562). Can you please compile the updated LEDE firmware for the WR840N v4 by post above; having installed the installed Lede firmware, I couldn’t configure wifi because Warned that WiFi is buggy, it can be cured with wifi in lede, with the support of the Russian-language menu of the Web interface + GodByeDpi / Zapret-Bolvan to bypass blockagesILV, IPTV, Vlan 802.1Q Tagging for IPTV?!

https://wikidevi.com/wiki/TP-LINK_TL-WR840N_v4

By the way, iptv I was able to set up the Lede firmware above with VLAN forwarding, but so far without the Internet (((I didn’t figure out how to make the Wan interface set up so that the provider’s PPPoE session without the Vlan was up! + With the IPTV provider vlan'om together (((

Thanks a lot in advance

Post has been editedTE8T - 13.03.19, 21:40
new__user
Message#2829
11.03.19, 20:10
a guest
*
[offline]

Group: Users
Messages 3
Check in: 11.10.16

Reputation:-  1  +

Thanksdigiman_123andkestuaindicatedin a wayTL-WR840 v.4 was interlaced uninterruptedly, and at the same time the name was changed to TL-WR841N v.13. After this, the “extreme” firmware for this model was pumped up by the standard procedure (TL-WR841N (RU) _V13_180330.zip).

Post has been editednew__user - 11.03.19, 20:11
TE8T
Message#2830
12.03.19, 16:02
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 118
Check in: 04.11.13

Reputation:-  2  +

new__user @ 03/11/19, 10:10*
Thanks to digiman_123 and kestua in this way, the TL-WR840 v.4 INTERCONNECT uninterruptedly passed through and at the same time the "change of surname" to TL-WR841N v.13. After this, the “extreme” firmware for this model was pumped up by the standard procedure (TL-WR841N (RU) _V13_180330.zip).


Hello. Can you tell? Now your TL-WR840 V4 router normally holds wi-fi and doesn’t work. It doesn’t slow down accidentally, you don’t use IPTV either. Did you not configure VLAN forwarding ?!

And is it stable? If you download torrents via an Ethernet LAN port by connecting to a computer, or to a laptop or via wi-fi, and How many devices work on the jump without brakes?

And at what speed do your gadgets work / show and what is the speed of your tariff, if it's not a secret?

Post has been editedTE8T - 12.03.19, 16:03
vovan26_
Message#2831
12.03.19, 16:39
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3322
Check in: 15.06.16

Reputation:-  389  +

* TE8T,
Use firmware fromPadavan / linaroand all you will be in chocolate.
PROMETHEUS (Post Freize # 45747611)


--------------------
The desire to get an answer implies the ability to formulate a question. (I.V. Stalin)
I do not answer general questions in a personal, ask it on the forum.
Linux OS Debian
TE8T
Message#2832
12.03.19, 17:04
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 118
Check in: 04.11.13

Reputation:-  2  +

* vovan26_, Do you really not understand the technical possibility to assemble the firmware I do not have. No PC hardware on what to collect!

If there were a computer, I would have liked to assemble it with a custom perimeter driver for the WiFi module, so that tp-link wr840 v4 would work stably and not buggy WiFi!

Post has been editedTE8T - 12.03.19, 20:08
solalex1
Message#2833
13.03.19, 07:13
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1083
Check in: 17.11.10
Xiaomi Mi 5S 3/64

Reputation:-  140  +

TE8T @ 03/12/19, 19:04*
That would work stably tp-link wr840 v4 and not buggy WiFi!

On the release of 18.06.2 there are no problems with Wi-Fi
https: //downloads.open...targets/ramips/mt76x8/
a2group
Message#2834
13.03.19, 11:11
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 191
Check in: 01.02.10
Samsung Galaxy S7 EDGE SM-G935F

Reputation:-  -1  +

Has anyone tried openwrt on v4 to configure vlan? On one port, one tagged and untagged at the same time fails. The limitation of iron, you need to do through q-n-q.
rhianonte
Message#2835
13.03.19, 17:38
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 90
Check in: 27.10.13
Xiaomi Redmi 3S

Reputation:-  0  +

solalex1
...
On the release of 18.06.2 there are no problems with Wi-Fi

Only for some reason, on three 840 v5 RU on all openwrt from the official branch, the settings are reset after a power outage. Everything is fine in the laid out assembly on the forum, but the waffle doesn't work. And there is no sense from off-firmware - dead van ports. And to bother with the installation of bubunta for the sake of collecting firmware from a working waffle is neither the time nor the desire

Post has been editedrhianonte - 13.03.19, 17:40


--------------------
r3s miui.su 8.3.29
r4 miui.su stable
TE8T
Message#2836
13.03.19, 21:12
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 118
Check in: 04.11.13

Reputation:-  2  +

* solalex1I recently put this release when I had a PC, so don't lie,buggy wifi with setting via web interface, setting wpa2-PSK password with AES encryption as before, so I'm sitting on the stock 0.9.1 3.16 v0283.0 Build 170407 Rel.44306n for wr840 V4

Post has been editedTE8T - 13.03.19, 21:36
TE8T
Message#2837
13.03.19, 21:23
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 118
Check in: 04.11.13

Reputation:-  2  +

* a2group,
Has anyone tried openwrt on v4 to configure vlan? On one port, one tagged and untagged at the same time fails. Iron restrictionneed to do through q-n-q .

Aboutq-n-qcan you have more details please?

I have a slightly different situation on different Lan ports configured by Vlan in principle furychilo, only there are terrible glitches with the wi-fi module ((by the way I put the last stable build from the branch18.06.2/ targets / ramips / mt76x8 /
a2group
Message#2838
14.03.19, 11:04
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 191
Check in: 01.02.10
Samsung Galaxy S7 EDGE SM-G935F

Reputation:-  -1  +

Understood. To use both the Internet and Iptv or telephony:
For the Internet in the swith section on the WAN port, expose the untagget vlan on the CPU tagget
Place one of the lan ports in a separate Vlan with settings similar to wan.
Create a file named 30-sw in the folder/etc/hotplug.d/ifacewith the following content:
swconfig dev rt305x port 0 set doubletag 1
swconfig dev rt305x set apply 1

Further, in the Interfaces section, create an unmanaget interface and in Physical Settings set a custom interface of the form eth0.2.200
where 2 is the untaget vlan number with the Wan port, and 200 is the vlan iptv number. then you can select a bridge and add a dedicated port to which the iptv prefix is ​​connected

Post has been editeda2group - 15.03.19, 05:12
89sancho89
Message#2839
16.03.19, 18:29
\ m / \ m /
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 981
Check in: 16.12.11
Xiaomi Redmi Note 3 Pro Special Edition

Reputation:-  58  +

Hello! I read the topic on the firmware .. is there a router from Kyivstar v2, how can I flash it without special cables and disassembly ??


--------------------
Smartphone: Xiaomi Redmi Note 3 pro SE
Tablet: Ergo Tab Hero 2 - Android 4.2.2 V2
terakon
Message#2840
17.03.19, 10:06
Guru
*********
[online]

Group: Friendssavagemessiahzine.com
Messages 3664
Check in: 11.04.14
Lenovo P2 4/64

Reputation:-  114  +

* 89sancho89, Yes


--------------------
Lenovo P2 4/64 P2c72 (Xtended XP5)
tin-sid
Message#2841
17.03.19, 16:32
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 368
Check in: 29.07.12
Gigabyte GSmart G1345 Sunfish

Reputation:-  8  +

* myth11made udpxy on v6?

147 pagesV  « < 140 141 142 143 144 145 > » 


 mobile version    Now: 04/18/19, 15:24