Assistant
| REPLY |
 Xiaomi Redmi 4 - MIUI firmware |
Message#1  11.11.16, 20:48 | ||||||
Yuzver  [offline] Group: Honorary Gameday Messages 2062 Check in: 13.09.11 Xiaomi Redmi 4 Standard Reputation:  404  | Xiaomi Redmi 4 - MIUI Firmware (OS 6.0)  Xiaomi Redmi 4, HM4, pradaDescription | Discussion � | Xiaomi club � | Marriage � | Purchase � | Accessories � | Catalog of topics for MIUI v6 / v7 / v8 / v9 / v10 � | Discussion camera Xiaomi Redmi 4 / Redmi 4 Prime � | Power consumption (autonomy) � | Modification and decorations � | Development of kernels and custom firmware for Xiaomi Redmi 4 (prada) � | Mi Account � | Bootloader unlocking � | MIUI firmware � | Configure Notifications � | This theme contains firmware for Redmi 4 2/16, firmware for its older version of Redmi 4 Pro (Prime) 3/32 arehere! Important information! Short FAQ for those who do not understand  Onpage with firmware for Redmi 4there is a globalka for someRedmi 4 (India Version)is an assembly forRedmi 4x! Redmi 4Pradaand Redmi 4X (India)Santoni- thisvariousmodels, and installing globalku for the Indian version, you will getbrick. Be careful.Want to ask a question?  FAQ � What firmware will come the ordered smartphone? - Vendors on Aliexpress put on a flip flop. However, they can leave the original, if asked. � Will the firmware update on OTA? - Depends on the firmware. If it comes with the original Anglo-Chinese or global firmware, yes. Any flip flops will not be updated. � And look, what is my firmware? � See and determine for yourself. � And which firmware is better, what to install? - See the results of surveys, read the topic - there is no perfect firmware. � How to unlock the bootloader? And what is it all about? - All answershere. By the way, you will most likely be able to unlock the bootloader in Vietnamese - try. � Can I flash a phone with an unlocked bootloader via MiFlash? Is the bootloader blocked? - You can flash. The loader will only be blocked if the option is selected.clean all and lock. � Can I flash TWRP and install custom firmware on a smartphone with a locked bootloader? - It is impossible. � Is it possible to flash the firmware from Redmi 4 Prime or from 3S? - Only if you really want to zakirpichit phone - different hardware, different platforms. � Can I get root access on a smartphone with a locked bootloader? - It is impossible. � My phone is rebooting itself, advertising is climbing and curve translation, what should I do? - These bugs are typical for the so-called. Vietnamese, the best option is to change the firmware to the official Chinese or any caste. � Is it possible to somehow defeat arbitrary reboots in Vietnamese? - Try to disable the fingerprint scanner, if there is no effect - do a full reset. � During a conversation, the connection is periodically interrupted, what can help? - Try to disable VoLTE in “settings - mobile networks”. � The phone stopped being detected by the computer in MTP mode, how to fix it? - The problem occurs after installing SuperSU 2.79, usethis instructionor change SuperSU to version 2.65. Can also helpthis post. � I changed the firmware, now the network is not working / the network is falling off, what should I do? - We look cap, spoiler"instructions", there are three options for restoring the network. And even better to prepare in advance - to make a backup of the EFS partition in TWRP before changing the firmware. Backups are best stored on external memory. � I did something wrong, now my device does not turn on, does not respond to buttons, there is no logo and vibration - how to loosen? - Check outphone firmware via test-point. May helpmethod and without disassembling the phone. � Set a password / pattern and forgot it, how to reset? - will help youMi PC Suite. � The camera freezes when the HDR mode is on, how to fix it? - Perhaps, the rights of build.prop have flown off -check out. � I stitched with TWRP from internal memory, and how to delete the archive with the firmware? Takes a place, but I can not find. - Searchvia the Downloads application. � I can not figure out - and how to enable Google Now by holding the "Home" button? � Enabling google now to hold the home button on Chinese firmware and based on them. � After restoring the backup from TWRP, the phone does not accept the password / key, what should I do? - Boot into TWRP anddo so. � �������&�������� downloadDrivers and Utilities MIUI | AFH | Mail | MIUI ROM Flashing Tool (MiFlash) | 2017.04.25.0 MIUI | AFH | Mail | MIUI ROM Flashing Tool (MiFlash) | 2016.12.22.0 MIUI | AFH | Mail | MIUI ROM Flashing Tool (MiFlash) | 2016.08.30.0 MIUI | AFH | Mail | MIUI ROM Flashing Tool (MiFlash) | 2016.04.01.0 savagemessiahzine.com | MiFlashPro | 3.3.419.57 MIUI | Mi Unlock | 3.3.418.37 MIUI | Mi Unlock | 2.3.803.10 MIUI | Mi Unlock | 2.2.406.5 savagemessiahzine.com | Mi PC suite | 3.2.1.3111_2717 savagemessiahzine.com | Mi PC suite | 2.3.0.1031_2717 savagemessiahzine.com | Mi PC suite | 2.2.0.7032_2717 savagemessiahzine.com | Qualcomm Product Support Tools (QPST) | 2.7.460 savagemessiahzine.com | Qualcomm Product Support Tools (QPST) | 2.7.438 savagemessiahzine.com | Qualcomm Flash Image Loader (QFIL) | 2.0.0.5 savagemessiahzine.com | Qualcomm Flash Image Loader (QFIL) | 1.0.0.3 savagemessiahzine.com | Qualcomm Flash Image Loader (QFIL) | 1.0.0.2 savagemessiahzine.com | QDLoader HS-USB Driver | 32/64-bit savagemessiahzine.com | ADB Driver Lite | 32/64-bit github | Xiaomi ADB / Fastboot Tools | 3.0.0 savagemessiahzine.com | Platform-tools (adb / fastboot) | r.28.0.0 | Windows / Linux / macOS savagemessiahzine.com | Platform-tools (adb / fastboot) | r.23.1_. | Windows- XP support AFH | Minimal ADB and Fastboot | 1.4.3 | Setup AFH | Minimal ADB and Fastboot | 1.4.3 | Portable AFH | Minimal ADB and Fastboot | 1.4.2 | Setup AFH | Minimal ADB and Fastboot | 1.4.1 | Portable Dropbox | 15 seconds ADB Installer | 1.4.3 Hashtab � file checksum utility USBDeview � a list of all USB-devices with the possibility of their removal from the system Firmware All about MIUI versions Support for the device is officially discontinued !!! More new firmware will no longer be, at least official. OTA update is on the following firmware: Official- China / Global (Stable / Developer) MiuiPro- Stable / Developer (Provided if you zadonati or.) Official Minimum required for firmware: locked bootloader, driver set, MiFlash, QFIL or Mi PC Suite utilities China Page with firmware Available languages: Chinese, English - There is no Russian! China Stable:
China Developer:
Global Onpage with firmware for Redmi 4there is a globalka for someRedmi 4 (India Version) is an assembly for Redmi 4x ! Redmi 4 Prada and Redmi 4X (India) Santoni - this various models, and installing a globalku for the Indian version, you risk getting brick . Be careful. Available languages: Chinese, English, Russian, Ukrainian + a bunch of bourgeois Global Stable:
Mirror for stable global firmware for Fastboot. Global Developer: Official builds (China / Global) Required minimum for firmware: unlocked bootloader installed by TWRP Flip flops Available languages: Chinese, English, Russian, Ukrainian + a bunch of bourgeois
Green - Actually, updated; Red - Not updated; The black - Perhaps there will be updates; Sonar project Available languages: Russian is present. Attention, the firmware is assembled is not known from any build, as of the device support is discontinued. Stable: Link | Mirror | Mirror |Firmware Version | MIUI version | What to flash. �  Google | Mega | 10.3.3.1 | 10 | TWRPDeveloper: Link | Mirror | Mirror |Firmware Version | MIUI version | What to flash. � Google | Mega | 9.5.17 | 10 | TWRP MiRoom MiRoom | Description | Sign up for beta test Available languages: Russian is present. Stable: Link | Mirror | Mirror |Firmware Version | MIUI version | What to flash. � AFH | Google | Sourceforge | 10.2.1.0 | 10 | TWRP Developer: Link | Mirror | Mirror |Firmware Version | MIUI version | What to flash. � AFH | Google | Sourceforge | 9.4.3 | 10 | TWRP MiuiPro Google->MiuiPro Available languages: Russian present Stable: Link |Firmware Version | MIUI version | What to flash. � Google | 9.5.2.0 | 9 | TWRP � Google | 9.2.4.0 | 9 | TWRP Developer: Link |Firmware Version | MIUI version | What to flash. � Google | Yandex | 9.4.3 | 10 | TWRP � Mail | 9.1.3 | 10 | TWRP � Google | 8.11.1 | 10 | TWRP � Mail | Yandex | 8.5.14 | 9 | TWRP Miui brasil MiuiBrasil | Description | Video review Available languages: Russian present Stable: Link |Firmware Version | MIUI version | What to flash. � Sourceforge | 9.5.2.0 | 9 | TWRP Developer: � AFH | 8.11.22 | 10 | TWRP Xiaomi.eu xiaomi.eu | AFH Available languages: Chinese, English, Polish, Slovak, Czech, Bulgarian, Hungarian, French, Swedish, Russian, Ukrainian, Croatian, Vietnamese, Italian, Greek, Norwegian, Dutch, Spanish, Turkish, Brazilian Portuguese, Portuguese, Hebrew, Romanian, German, Catalan Korean Korean Slovenian Thai Finnish Stable: Link |Firmware Version | MIUI version | What to flash. � AFH | Sourceforge | 10.2.1.0 | 10 | TWRP � AFH | Sourceforge | 10.1.1.0 | 10 | TWRP � AFH | Mega | 9.5.2.0 | 9 | TWRP � AFH | Mega | 9.2.4.0 | 9 | TWRP � AFH | Mega | 8.5.2.0 | 8 | TWRP � AFH | Mega | 8.1.4.0 | 8 | TWRP Developer: Link | Mirror | Mirror |Firmware Version | MIUI version | What to flash. � AFH | sourceforge | miui.dedyk | 9.1.3 | 10 | TWRP This is the last build, then support stops. Custom for fastboot StarMixx999 / xn-01 (For MiFlash) Firmware forUnlockedbootloader under MiFlash. Stable: � savagemessiahzine.com->Google | MultiROM 9.2.4.0 Build 3 | 9 | MiFlash / fastboot � savagemessiahzine.com->Google | MultiROM 9.2.4.0 Build 1 | 9 | MiFlash / fastboot � savagemessiahzine.com->Google | MultiROM 8.5.2.0 Build 9 | 8 | MiFlash / fastboot � savagemessiahzine.com->Google | Xiaomi.eu 8.1.2.0 | 8 | MiFlash / fastboot Developer: � savagemessiahzine.com->Google | MiuiPro 8.8.9 | 10 | MiFlash / fastboot � savagemessiahzine.com->Google | MiuiPro 8.8.2 | 10 | MiFlash / fastboot Outdated firmware Mi-globe Mi-globe ; button press Show Expert Setting will open the extended assembly constructor Available languages: the same as in the xiaomi.eu builds Firmware based on the base of xiaomi.eu, therefore, everything is the same as on the xiaomi.eu firmware, only added its own buns. Developer: Link to the firmware through the assembly designer here Link |Firmware Version | MIUI version | What to flash. MiGlobe | 9.1.3 | 10 | TWRP Miui hellas Miui hellas | Description Available languages: Russian present Firmware based on the base of xiaomi.eu, therefore, everything is the same as on the xiaomi.eu firmware, only added its own buns. Developer: Link |Firmware Version | MIUI version | What to flash. � miui.gr | 9.1.3 XTRV | 10 | TWRP � miui.gr | 9.1.3 arΩma | 10 | TWRP MultiRom MultiRom | Byteturtle Available languages: Chinese, English, Russian, Ukrainian, Lithuanian, German Stable: � Mega | Google | 9.5.2.0 (Build 4) | 9 | TWRP � Mega | Mail | 9.2.4.0 (Build 3) | 9 | TWRP � Mega | Mail | 8.5.2.0 (Build 9) | 8 | TWRP � Mega | Mail | 8.2.1.0 (Build 8) | 8 | TWRP � Mega | Mail | 8.1.5.0 (Build 7) | 8 | TWRP Developer: � MultiROM | byteturtle | 8.4.26 (Build 19) | 9 | TWRP MIUI Russia miui.su | MEGA & Mail Available languages: Chinese, English, Russian, Ukrainian, Belarusian Stable: � Miui.su | Mail | 9.5.2.0 | 9 | TWRP - Recommended by the curator) � Miui.su | Mail | 9.2.4.0 | 9 | TWRP Developer: � MIUI Russia | AFH | 8.4.26 | 9 | TWRP greatslon Page with firmware Available languages: the same as in the xiaomi.eu builds Developer: Mail | AFH | 7.12.21 | 9 | TWRP | Build description onsavagemessiahzine.com malchik-solnce Available languages: Chinese, English, Russian, Ukrainian, German Developer: Index | 7.5.25 | 8 | TWRP MIUI SF mod savagemessiahzine.com Available languages: Russian present Developer: Mail | Mega | 7.9.7 | 9 | TWRP Bonn TWRP / Root / Modems / Kernels TWRP � Stock recovery � TWRP FAQ � TWRP 3.0.3-0 from hanuma50 | Setup reboot from TWRP to TWRP / bootloader � TWRP 3.0.2-0 from brigudav � TWRP 3.1.0-0 from brigudav + Auto installer - is recommended � TWRP 3.1.0-0 Material / Miui mod � OrangeFox Recovery Project [R10] / Red Wolf Recovery Project [027] � TWRP 3.2.3-0 Root � ® SuperSU - possible problems with MTP � ® Magisk - The Universal Systemless Interface - is recommended Modems
Kernels Attention! If you have no idea what it is, and why, pass by, to avoid problems. All kernels as img images! To install, unzip the archive, put boot.img in the memory root (any), boot into TWRP, Press the "Install" button,Pre-switch explorer to img modeselect corethen select "boot", and drag the slider to flash.
Instructions What you need to know before the firmware or "I warned") To understand the situation: Everything that you do - at your own peril and risk! Forum users do not bear any responsibility for actions performed by YOU.
All details in"set of instructions" below. ~ Stitch ~ � Alternative fastboot and adb firmware without PC � Instructions for firmware from linux-like systems � Redmi 4 Instructions Kit - how to flash (MiFlash, TWRP, fastboot), how to get / remove root, list of firmware � Instructions for flashing the Global version via TWRP / EDL / Fastboot � Video instruction on firmware � Instructions for firmware via QFIL (QPST) � Simple TWRP Installation Instructions � Mi PC Suite : time and two - firmware (can also help sprinkle), reset the password / pattern / fingerprint. Attention ! Firmware take here � Smartphone firmware with closure Test point (test point) - if you have a brick ~ Fix ~ � Instructions for restoring IMEI and NVRAM (if Network, WIFI and Bluetooth are missing) � Network Restore 1 (EFS spoofing -TWRP) | Network Restore 2 (firmware viafastboot) | Network Recovery 3 (modem firmware -TWRP) | Network recovery 4 (modem firmware viafastboot) | replacement of a sim card at a telecom operator can also help � Recovery of work in the MTP mode - root � Recovery of work in the MTP mode - no root / Win 8 (10) x64 + driver for Windows xp � Solving the problem of recording on microSD � Solving the problem with idle Wi-Fi � Solving the problem with a subsiding sound in YouTube and instagram on Multirome 8.2.1.0 � If the auto-rotate sticks � Another way to cure sticky auto-rotate � Possible solution to the problem with not falling asleep phone after charging up to 100% ~ Goodies ~ � Script for backup and restore partitions EFS and Persist � Script to check the status of the loader / ARB � Ways to enter different modes + Edl � MIUi 9 multipro put the phone in EDL mode � Check archive checksum with firmware � Extracting system files from firmware � We rule TTL - bypassing the wi-fi distribution opCoS restriction � Fix to support Wi-fi 40Mhz channel width (only for 2.4Ghz frequency) � We activate support / reading of exFAT, F2FS, NTFS formats from an SD card, via OTG miscellanea � Patch To Increase Sound Volume � Camera from MiuiPro Firmware (only for miui10) � Removing embedded applications without root on a locked bootloader � If the region flies after a reboot (Root needed) � HD Voice Activation � How to install Google Apps (GAPPS) on Chinese firmware � How to restore sensors, bluetooth and wifi � Configure Notifications � Theme for editing the system resources of MIUI firmware � How to disable unnecessary applications on MIUI 8 - no root � What can I remove / freeze on MIUI 8 � Some buns MIUI � Optimizing system memory and what it gives � Disable Google Spell Checker � Increased circle with the outgoing / received call avatar from Wilderns � Boot logo from N-e61 � Patch dialers with a large range of contact and improved sound recording quality for MultiROM 8.1.5.0 � GPS сonfig for residents of Ukraine � Solution with the Region � INSTALLATION Xposed on MIUI 10 � INSTALLATION Xposed on MIUI 9/8 � Detailed instructions for fixing the sound using the installation ViPER4Android Applications GApps(choose ARM64, 6.0,Pico; installation via TWRP)| or | In the Chinese Appstore, we search and install Google. Google play | savagemessiahzine.com | MIUI 8 Tweaks [Xposed] Google play | savagemessiahzine.com | extMIUIv7 [Xposed] Google play | savagemessiahzine.com | xMIUI Google play | savagemessiahzine.com | UMS Enabler (Universal)- we connect the USB stick in the drive mode Poll results Closed 03/03/2017:
Closed 04/04/2017:
Closed 05.30.2017:
Closed 06/01/2018:
Closed 11/09/2018:
Topics Curator:Chito $ Post has been editedcherva70 - Yesterday, 19:02 Reason for editing: Off.site + Sonar description - deleted | |||||
Message#2 09.11.16, 13:01 | ||||||
Mark Knopfler fan [online] Group: Friendssavagemessiahzine.com Messages 10823 Check in: 07.12.12 Xiaomi Mi Max 3 4/64 Reputation: 4370 | Redmi 4 Instructions Kit All instructions are written under the officially unlocked bootloader! The sequence of the instructions in the transition to custom firmware 2 � 5.1.1 � 6.1 1. How to determine whether the official firmware or Vietnamese is installed List of official firmware indexes 8.0.2.0 8.0.3.0 8.0.5.0 Global 8.1.1.0 8.1.2.0 8.1.4.0 8.1.5.0 8.2.1.0 8.5.2.0 9.2.4.0 9.5.2.0 9.5.3.0 (MCEMIFA) Global Not official �Containing more than 4 digits in the index:8.0.3.0.0, 8.0.0.3.0, 8.2.15.10, 83.0.0.0etc. �The digital index is between the official ones, but does not coincide with them:8.0.4.0, 8.0.7.0, 8.1.6.0, 8.2.0.0etc. �The letter index of which is different fromMCECNxx �Any other firmware with poor translation 2. Unlocking the bootloader via Mi Unlock To unlock you will need a Mi-account with approved permission! Judging by the user reviews, you can unlock the bootloader in Vietnamese, but this does not always work. Therefore, first try on it; if it does not work out - we reflash to the official firmware 1.Enter in the smartphone data Mi-account (Settings - Mi Account) 2.We transfer the smartphone to the modefastboot(turn off, hold down the power button and volume minus, after the vibration release the power button and wait for the picture with the hare to appear). We connect it to a PC / laptop 3.SwingingMi Unlock(spoilerDrivers and Utilities) and unpack the contents of the archive into an empty folder on your PC / laptop 4.RunMi Unlockand push the buttonAgree Screenshot
5.Enter in the application data of the Mi-account and clickSign in. Enter the same bunch of username / password as on the smartphone! Those. if it was Email / Password, then in the application we enter the same data! Screenshot
6.Next, press the buttonUnlock Screenshot
7.The appearance of the inscriptionUnlocked successfullymeans that the bootloader is unlocked. Push buttonReboot phoneand wait for the smartphone to reboot Screenshot
3. Check bootloader status via fastboot 1.SwingingPlatform-tools (adb / fastboot)(spoilerDrivers and Utilities) and unpack the contents of the archive into an empty folder on your PC / laptop 2.We transfer the smartphone to the modefastboot(turn off, hold down the power button and volume minus, after the vibration release the power button and wait for the picture with the hare to appear). We connect it to a PC / laptop 3.In the file folderadb / fastbootwe clampShiftand by pressingright mouse buttonchooseOpen command window Screenshot  4.In the console window that opens, sequentially type the commands fastboot devices fastboot oem device-info Screenshot
�If afastbootgives outDevice unlocked:true- loaderunlocked �If afastbootgives outDevice unlocked:false- loaderblocked by 4. Smartphone firmware 4.1. fastboot - for unlocked bootloader 1.SwingingPlatform-tools (adb / fastboot)(spoilerDrivers and Utilities) and unpack the contents of the archive into an empty folder on your PC / laptop 2.Download the archive with the firmware (theme header, spoilerFirmwareversion forMiFlash / fastboot) and unpack the folder with filesadb / fastboot Screenshot  3.We transfer the smartphone to the modefastboot(turn off, hold down the power button and volume minus, after the vibration release the power button and wait for the picture with the hare to appear). We connect it to a PC / laptop 4.In the file folderadb / fastbootrunflash_all.batwaiting for the reboot and disconnecting the smartphone The first start of the OS after the firmware lasts 5-20 minutes! If the points on the screen below “run” - everything is fine, just wait ... The advantage of this method is that fastboot absolutely spits on the bitness of the OS and the amount of RAM 5. Install / Update TWRP 5.1. Installation 5.1.1. fastboot - for unlocked bootloader 1.SwingingPlatform-tools (adb / fastboot)(spoilerDrivers and Utilities) and unpack the contents of the archive into an empty folder on your PC / laptop 2.Swingingarchiveand unpack its contents in the folder with the filesadb / fastboot If you got here from the header of another topic - rename the TWRP image for your smartphone to twrp.img and copy the replacement folder with files adb / fastboot 3.We transfer the smartphone to the modefastboot(turn off, hold down the power button and volume minus, after the vibration release the power button and wait for the picture with the hare to appear). We connect it to a PC / laptop 4.In the file folderadb / fastbootrunflash_twrp.batwaiting for TWRP launch and disconnecting the smartphone If installing TWRP is done without changing the firmware We allow to modify the System if it is asked about this when launching TWRP! 5. Advanced - Disable Verify (orinstallSuperSU 2.65, if you need root) 6.Reboot - System After installation, update SuperSU via Google Play. This sequence will avoid problems with the modes ADB, PTP, MTP and USB-modem 5.2. Update 5.2.1. TWRP 1.We connect the smartphone to a PC / laptop and copy the necessary image to the root of the MicroSD / internal memory (for the convenience of searching in TWRP). Disconnect the smartphone In TWRP: 2.Install -Install Image- choose the image of TWRP - sectionRecovery- we are waiting for the end of the process 3. Reboot - Recovery 5.2.2. fastboot - for unlocked bootloader TWRP update viafastbootno different from the installation. Just rename the desired image totwrp.imgand move it with the replacement in the folder with the filesadb / fastboot 6. Install / update custom firmware and get root 6.1. Installing custom firmware It is highly recommended to install the firmware copied to the microSD in order not to get a smaller amount of free internal memory! We allow to modify the System if it is asked about this when launching TWRP! In TWRP: 1.Wipe - Advanced Wipe - all partitions except MicroSD and OTG 2. Reboot - Recovery If at this stage the smartphone hangs on the Mi logo �Clamping the power and volume buttons plus �After the vibration, release the power button and wait for the launch of TWRP 3.Configure TWRP (language selection, time zone setting, etc.) Download the archive with the firmware (topic header,Firmware) Check the MD5 archive with the firmware after downloading!Perfect for this purpose.Hashtab(tab in the file properties) 5.We connect the smartphone to a PC / laptop and copy to the root of the MicroSD / internal memory (for the convenience of searching in TWRP) firmware archives andSuperSU 2.65. Disconnect the smartphone 6. Reboot - Recovery If at this stage the smartphone hangs on the Mi logo �Clamping the power and volume buttons plus �After the vibration, release the power button and wait for the launch of TWRP 7.Install - select the archive with the firmware, then add the SuperSU archive to the queue (if you need root) - put a tick on the reboot after the firmware - waiting for the end of the process After installation, update SuperSU via Google Play. This sequence will avoid problems with the modes ADB, PTP, MTP and USB-modem 6.2. Custom firmware update We allow to modify the System if it is asked about this when launching TWRP! In TWRP: 1.Making the necessary wipe (morehere) Download the archive with the firmware (topic header,Firmware) Check the MD5 archive with the firmware after downloading!Perfect for this purpose.Hashtab(tab in the file properties) 2.We connect the smartphone to a PC / laptop and copy to the root of the MicroSD / internal memory (for the convenience of searching in TWRP) firmware archives andSuperSU 2.65. Disconnect the smartphone 3. Reboot - Recovery If at this stage the smartphone hangs on the Mi logo �Clamping the power and volume buttons plus �After the vibration, release the power button and wait for the launch of TWRP 4.Install - select the archive with the firmware, then add the SuperSU archive to the queue (if you need root) - put a tick on the reboot after the firmware - waiting for the end of the process After installation, update SuperSU via Google Play. This sequence will avoid problems with the modes ADB, PTP, MTP and USB-modem 7. Firmware Update 7.1. Official (China / Global) and Vietnamese When updating via the built-in update application(firmware for recovery / system) Canupdate: China - China Global - Global Flip Flop - Global (check required) Withraisingfirmware version data will be saved Withloweringfirmware version /transition from stable firmware to developer and vice versaall data will be erased It is impossibleupdate: China - custom China - Global Custom - China Custom - Global Flip Flop - China Flip Flop - Custom 7.2. Custom All such assemblies are updated exclusively through TWRP! �Withraisingfirmware versions andassembly from the same team or author: you can not wipe anything. Or just Cache, if you really want. ART / Dalvik Cache and System will be formatted automatically. �Withloweringfirmware versions andassembly from the same team or author: Data wipe is required, otherwise you will receive a non-working modem at the output. You can also wipe Cache. ART / Dalvik Cache and System will be formatted automatically. �Withraising / lowering / savingfirmware versions andtransition to assembly from another team or author: it is highly desirable to put the firmware "clean" by formatting all partitions except MicroSD and OTG 8. Transition from firmware to firmware 8.1. China - Global �If the loaderunlocked- instruction4.1 8.2. Flip Flop - Global 8.2.1. Built-in application \ "Update \" The method requires verification! 1.Download the archive with the firmware (topic header,Firmwareversion forRecovery / System) and copy it to the root of the microSD / internal memory (for easy retrieval) I advise you to check the MD5 archive with the firmware after downloading!Perfect for this purpose.Hashtab(tab in the file properties) 2.Open the "Update" application and select the downloaded archive in its settings (3 points in the upper right corner) (in case of verification errors we try to rename the archive toupdate.zip) All data and settings will be deleted! 3.We agree with all the proposed conditions and look forward to the launch of the updated OS 8.2.2. fastboot - for unlocked bootloader �Instruction4.1 8.3. Custom - Global If TWRP is no longer required- just use the instructions4.1 It is highly recommended to install the firmware copied to the microSD in order not to get a smaller amount of free internal memory! In TWRP: 1.Wipe - Advanced Wipe - all partitions except MicroSD and OTG 2. Reboot - Recovery If at this stage the smartphone hangs on the Mi logo �Clamping the power and volume buttons plus �After the vibration, release the power button and wait for the launch of TWRP 3.Configure TWRP (language selection, time zone setting, etc.) Download the archive with the firmware (topic header,Firmwareversion forRecovery / System) I advise you to check the MD5 archive with the firmware after downloading!Perfect for this purpose.Hashtab(tab in the file properties) 4.We connect the smartphone to the PC / laptop and copy the archive with the firmware to the root of the MicroSD / internal memory (for the convenience of searching in TWRP). Disconnect the smartphone 5. Reboot - Recovery If at this stage the smartphone hangs on the Mi logo �Clamping the power and volume buttons plus �After the vibration, release the power button and wait for the launch of TWRP 6.Install - select the archive with the firmware -NOTput a tick on the reboot after the firmware - waiting for the end of the process 7. Advanced - Disable Verify 8.Reboot - System Subsequent OTA update 1.With an OTA updateNOT updated directly, and open the application "Update" and select in the settingsDownload update 2.After the download is complete (the firmware is downloaded in its entirety, and not an incremental update), clickReboot With this update option, TWRP will be deleted and the original boot will be restored. User data (settings, applications, contacts, etc.) will be saved In the future, you can update on OTA in the normal mode, no additional action is required The first start of the OS after the firmware lasts 15-20 minutes! If the points on the screen below “run” - everything is fine, just wait ... 8.4. Global - custom �Instructions2 � 5.1.1 � 6.1 The first start of the OS after the firmware lasts 15-20 minutes! If the points on the screen below “run” - everything is fine, just wait ... 9. Getting root 9.1. On the official (China / Global) firmware 1.SwingingPlatform-tools (adb / fastboot)(spoilerDrivers and Utilities) and unpack the contents of the archive into an empty folder on your PC / laptop 2.Swingingarchiveand unpack its contents in the folder with the filesadb / fastboot 3.We transfer the smartphone to the modefastboot(turn off, hold down the power button and volume minus, after the vibration release the power button and wait for the picture with the hare to appear). We connect it to a PC / laptop 4.In the file folderadb / fastbootrunboot_twrp.batand wait for the launch of TWRP TWRP will not be installed, but only loaded at a time! We allow to modify the System if it is asked about this when launching TWRP! 5.We copy to the root MicroSD / internal memory (for the convenience of searching in TWRP) archiveSuperSU 2.65. Disconnect the smartphone 6.Install - select the SuperSU archive - put a check on the reboot after the firmware - wait for the process to finish The SuperSU installation script is embeddedBoot image patchertherefore, there is no need to additionally patch boot by clicking Disable Verify! After installation, update SuperSU via Google Play. This sequence will avoid problems with the modes ADB, PTP, MTP and USB-modem ���������� Updating the official (China / Global) firmware with root installed 1.Download the archive with the firmware (topic header,Firmwareversion forRecovery / System) Check the MD5 archive with the firmware after downloading!Perfect for this purpose.Hashtab(tab in the file properties) 2.SwingingPlatform-tools (adb / fastboot)(spoilerDrivers and Utilities) and unpack the contents of the archive into an empty folder on your PC / laptop 3.Swingingarchiveand unpack its contents in the folder with the filesadb / fastboot 4.We transfer the smartphone to the modefastboot(turn off, hold down the power button and volume minus, after the vibration release the power button and wait for the picture with the hare to appear). We connect it to a PC / laptop 5.In the file folderadb / fastbootrunboot_twrp.batand wait for the launch of TWRP TWRP will not be installed, but only loaded at a time! We allow to modify the System if it is asked about this when launching TWRP! 6.We copy to the root of the microSD / internal memory (for the convenience of searching in TWRP) firmware archives andSuperSU 2.65. Disconnect the smartphone 7.Install - select the archive with the firmware, then add the SuperSU archive to the queue (if you need root) - put a tick on the reboot after the firmware - waiting for the end of the process The SuperSU installation script is embeddedBoot image patchertherefore, there is no need to additionally patch boot by clicking Disable Verify! After installation, update SuperSU via Google Play. This sequence will avoid problems with the modes ADB, PTP, MTP and USB-modem 9.2. On custom firmware 1.We connect the smartphone to a PC / laptop and copy it to the root of MicroSD / internal memory (for the convenience of searching in the TWRP) archiveSuperSU 2.65 In TWRP: 2.Install - select the SuperSU archive - put a check on the reboot after the firmware - wait for the process to finish After installation, update SuperSU via Google Play. This sequence will avoid problems with the modes ADB, PTP, MTP and USB-modem 10. Removing root 1.We connect the smartphone to a PC / laptop and copy it to the root of the MicroSD / internal memory (for the convenience of searching in TWRP)archive In TWRP: 2.Install - choose archiveunSU- put a tick on the reboot after the firmware - waiting for the end of the process 11. Installing GApps on the official (China) firmware 1.SwingingPlatform-tools (adb / fastboot)(spoilerDrivers and Utilities) and unpack the contents of the archive into an empty folder on your PC / laptop 2.Swingingarchiveand unpack its contents in the folder with the filesadb / fastboot 3.We transfer the smartphone to the modefastboot(turn off, hold down the power button and volume minus, after the vibration release the power button and wait for the picture with the hare to appear). We connect it to a PC / laptop 4.In the file folderadb / fastbootrunboot_twrp.batand wait for the launch of TWRP TWRP will not be installed, but only loaded at a time! We allow to modify the System if it is asked about this when launching TWRP! 5.We copy to the root MicroSD / internal memory (for the convenience of searching in TWRP) archiveGApps(topic header,Applications). Disconnect the smartphone 6. Reboot - Shutdown 7.We transfer the smartphone to the modefastboot(we hold down the power buttons and volume minus, after vibration release the power button and wait for the picture with the hare to appear) 8.We connect the smartphone to the PC / laptop. In the file folderadb / fastbootrunboot_twrp.batwaiting for TWRP launch and disconnecting the smartphone TWRP will not be installed, but only loaded at a time! We allow to modify the System if it is asked about this when launching TWRP! 9.Install - select the GApps archive - tick on the reboot after the firmware - wait for the process to finish Drivers and Utilities MIUI | AFH | Mail | MIUI ROM Flashing Tool (MiFlash) | 2017.04.25.0 MIUI | AFH | Mail | MIUI ROM Flashing Tool (MiFlash) | 2016.12.22.0 MIUI | AFH | Mail | MIUI ROM Flashing Tool (MiFlash) | 2016.08.30.0 MIUI | AFH | Mail | MIUI ROM Flashing Tool (MiFlash) | 2016.04.01.0 savagemessiahzine.com | MiFlashPro | 3.3.419.57 MIUI | Mi Unlock | 3.3.418.37 MIUI | Mi Unlock | 2.3.803.10 MIUI | Mi Unlock | 2.2.406.5 savagemessiahzine.com | Mi PC suite | 3.2.1.3111_2717 savagemessiahzine.com | Mi PC suite | 2.3.0.1031_2717 savagemessiahzine.com | Mi PC suite | 2.2.0.7032_2717 savagemessiahzine.com | Qualcomm Product Support Tools (QPST) | 2.7.460 savagemessiahzine.com | Qualcomm Product Support Tools (QPST) | 2.7.438 savagemessiahzine.com | Qualcomm Flash Image Loader (QFIL) | 2.0.0.5 savagemessiahzine.com | Qualcomm Flash Image Loader (QFIL) | 1.0.0.3 savagemessiahzine.com | Qualcomm Flash Image Loader (QFIL) | 1.0.0.2 savagemessiahzine.com | QDLoader HS-USB Driver | 32/64-bit savagemessiahzine.com | ADB Driver Lite | 32/64-bit savagemessiahzine.com | Platform-tools (adb / fastboot) | r.27.0.1 | Windows / Linux / macOS savagemessiahzine.com | Platform-tools (adb / fastboot) | r.25.0.4 | Windows / Linux / macOS savagemessiahzine.com | Platform-tools (adb / fastboot) | r.23.1_. | Windows- XP support AFH | Minimal ADB and Fastboot | 1.4.3 | Setup AFH | Minimal ADB and Fastboot | 1.4.3 | Portable AFH | Minimal ADB and Fastboot | 1.4.2 | Setup AFH | Minimal ADB and Fastboot | 1.4.1 | Portable Dropbox | 15 seconds ADB Installer | 1.4.3 Hashtab � file checksum utility USBDeview � a list of all USB-devices with the possibility of their removal from the system  Post has been editedChitoS87 - 19.05.18, 12:03 Reason for editing: Corrected a link to the missing archive with TWRP -------------------- Xiaomi Mi Max 3, M1804E4A - MIUI 10.3.2.0 xiaomi.eu #Magisk Apple iPad Air, A1474 - iOS 12.3.1 We haven't changed since ancient times ... | |||||
Message#3 15.11.16, 11:53 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1553 Check in: 08.11.12 Redmi Note 7 Pro 6/128 Reputation: 2438 | I assembled a trial version of TWRP 3.0.2-0 for Redmi 4 (prada), for the test, there is nothing to check for now, as they appear on hand, we will refine it. Installation via fastboot by running the batch file Flash-TWRP.bat  HM4-prada-TWRP3.0.2.zip(19.25 MB)Post has been editedCamerado - 19.01.17, 21:24 -------------------- 4 Xiaomi Redmi 2 | Redmi 4 Prime| Redmi 5 Plus 4/64 |Redmi Note 5 3/32 | Redmi Note 7 Pro 6/128 Zidoo X9S (2.1.22) |
Message#4 25.11.16, 20:03 | |
Local [online] Group: Friendssavagemessiahzine.com Messages 238 Check in: 25.04.07 Xiaomi Mi 6 6/128 Reputation: 45 | Here is another recovery option for this tube.cofface_recovery_redmi4. I did not try it myself, because the device is not on hand |
Message#5 29.11.16, 14:58 | |
Local [offline] Group: Banned Messages 179 Check in: 28.05.13 Xiaomi Redmi Note 4 3/64 Reputation: 47 | I asked Redmi 4 yesterday for the developer’s firmware from xiaomi.eu Immediately I warn you, all that I will write is from my memory, I sit at work and write for you. In my actions, I suspect, is full of garbage actions. But as a result, I received a working firmware for this phone. Do not judge strictly. Stitched everything WITHOUT the SIM card and without any fingerprints installed. The firmware was Chinese-English. 1. Disabled driver signature in Windows 10 Pro (this method won't work at home, but there are other ways): a) Click Win + R on the keyboard b) enter gpedit.msc in the Run window, press Enter c) In the editor, go to the section User Configuration - Administrative Templates - System - Driver Installation and double-click on the option “Digital Signature of Device Drivers” on the right-hand side. d) You can disable the check in two ways: 1. Set the value to "Disabled". (I chose this method) 2. Set the value to “Enabled”, and then, in the section “If Windows detects a driver file without a digital signature”, set “Skip”. other methods Hold down the "Shift" button and click "Start" ->"Shutdown" ->Reboot. After the reboot, the "Select Action" window appears. Selecting "Troubleshooting" ->"Extra options" ->“Boot Options” ->Reboot. After the reboot, we will see the “Reboot Settings” window, press “F7” and wait for the Windows to reboot. For Windows 8: Press the “Win + I” button combination. “Parameters” will come out to the right. Hold down the "Shift" and click "Off" ->Reboot. After the reboot, the "Select Action" window appears. Choose "Diagnostics" ->"Extra options" ->“Boot Options” ->Reboot. After the reboot, we will see the “Reboot Settings” window, press “F7” and wait for the Windows to reboot. For Windows 7: When turning on the computer, after the BIOS boot up stage, often press “F8”. The Advanced Boot Options menu appears. Choose "Disable driver signature mandatory". F8 does not always work the first time, so if it does not work out, you can either repeat it 2-3 times, or resort to an alternative method. Alternative method: Open the “Start” menu, in the search bar we write: cmd.exe with the right button on it and click “run as administrator”. The command line will open, enter 2 commands in turn: bcdedit.exe / set loadoptions DDISABLE_INTEGRITY_CHECKS bcdedit.exe / set TESTSIGNING ON Next, we reboot the computer, if everything worked out, then in the lower corner of the desktop you will see an inscription about the test mode. P.S: in order to get everything back in place, open the console again and enter: bcdedit.exe / set TESTSIGNING OFF and reboot. The inscription will disappear. 2. Install the driver on the computertook out of the cap. Installed ADB Driver Lite (32/64-bit) and QDLoader HS-USB Driver (32/64-bit) just in case. Important note on drivers In the Task Manager computer when connecting the phone to your computer / laptop should not appear any yellow exclamation marks or questions. Because of this, there may be problems carefully! 3. In the phone itself, I prepared everything for the firmware, just in case. Enabled debugging and OEM Go to Settings - About devices (About phones) - Tap on the firmware version many times until you are told that you are a "developer" - further in Advanced settings (Additional settings) - further in Delevoper options - Put a dial on OEM unlocking and on USB Debugging 4. Download Platform-tools (adb / fastboot) r.25.0.1from the cap, in the section "Drivers and Utilities". You will download the archive "tools_r25.0.1-windows.zip" 5. Download TWRPfrom this post You will download the archive "HM4-prada-TWRP3.0.2.zip" 6. On the "C" drive, I created a folder in which I mixed the files from the archives, described in paragraph 4 and 5. In that order. First, the files from "tools_r25.0.1-windows" and then,with replacement, in the same folder files from HM4-prada-TWRP3.0.2 The result was the following list of files in the folder: adb AdbWinApi.dll AdbWinUsbApi.dll fastboot Flash TWRP Recovery 7. Attention! If you haveofficial firmwarein the phone, then just Unblock the bootloader, how to read ithere, then go to paragraph 8. If you haveself-made firmware(how to defineread here), then we first install the official one, and then unlock the bootloader and sew the custom one. How to switch from self-made firmware to the official one a) Go to the official website by referencehttp://en.miui.com/a-234.html b) Find your phone (Redmi 4 Latest China Developer Version Fastboot File Download) c) Download the Chinese official firmware for Fastboot to install it via MiFlash d) Install the firmware bycap instructionsfrom  Camerado, "Firmware smartphone - MiFlash - for a locked bootloader."d) Go to the next step, to install the custom firmware 8. We download custom from "xiaomi.eu" or "Multi", see the link header. 9. We transfer the smartphone to fastboot mode (turn off, hold down the power buttons and volume minus, after vibration release the power button and wait for the picture with the hare to appear) 10. Connected the smartphone to the PC / laptop, in the folder with the downloaded files (from the folder under item 6), launch Flash-TWRP.bat and wait for the launch of TWRP. Disconnect the smartphone 11. Allow to modify the System if asked about this when you start TWRP! In TWRP: 1. Wipe - Advanced Wipe - everything except MicroSD and OTG 2. Reboot - RecoveryImportant! 3. We connect the smartphone to the PC / laptop and copy it to the root of the internal memory (for the convenience of searching in TWRP) the firmware archives and SuperSU Stable or SuperSU Beta. Disconnect the smartphone 4. Reboot - RecoveryImportant! 5. Install - select the archive with the firmware, then add the SuperSU archive to the queue (if you need root) - tick the reboot after the firmware - wait for the process to finish 12. Done In the coming days, another Redmi 4 will come to my hands, and I will be stitching it again. Then I optimize my post and maybe even videotape the whole process. I hope someone helped You do everything at your own peril and risk, I am not responsible for your actions. Also, do not forget to thank those who appear in my links (authors of instructions, those who leave links for you, etc.) Post has been editedBuzaaa - 02.12.16, 20:41 |
Message#6 02.12.16, 18:29 | |
Mark Knopfler fan [online] Group: Friendssavagemessiahzine.com Messages 10823 Check in: 07.12.12 Xiaomi Mi Max 3 4/64 Reputation: 4370 | K What we discuss / publish in this topic Firmware; firmware bugs; methods and methods of firmware; mirrors of firmware (preferably with duplication to me in QMS); other thingsdirectlyrelated to the firmware. What will be deleted without explanation! First, readResource rules(points 4, 5, 7) andWorking with Images on the forum • Questions about the release of firmware based on Android 7 (!!!) • Questions about the date of the appearance of the firmware ("And when?", "It's already 5 in the morning, where is the new build?, Etc."). The appearance of firmware is constantly monitored, the links in the topic header are updated according to their availability. • Questions "Where can I get the firmware name?". Everything is in the topic header, for current builds - direct links to the official resource + mirrors to choose from. Past versions - under the "Past versions" spoiler (surprising, really?) • Questions written “from a sinking ship” (“AAAA! HELP !!! WHAT TO DO?”, “I have no time to figure it out ...”, etc.). This is a technical forum; If you want to be helped, take the time to make a decisionyourProblems • Questions written by CAPSOM. Once again, this is a technical forum, not a forum of blondes, have respect for users who ask for help. • Dialogues of two users larger than 8 comments in total. No need to arrange from the forum chat, for this is QMS. • Answers without quotation or without a person, the answer to which question is given • Monosyllabic answers (such as “yes”, “no”, etc.), except when they are really sufficient • Answers that do not carry any useful information ("ok", "thank you", "well, try," "accomplish your goal", "+1", etc.) • Comments and posts containing obscene expressions and mate (even hidden). For this, the forum generally relies ban! • Any other comments at the discretion of the curator, not related to the theme of the firmware. This is especially true of those who like to discuss power consumption and custom firmware (CyanogenMod, etc.) The link to this post is placed in the topic header, so that everyone can read before writing! Post has been editedCamerado - 26.01.17, 20:12 -------------------- Xiaomi Mi Max 3, M1804E4A - MIUI 10.3.2.0 xiaomi.eu #Magisk Apple iPad Air, A1474 - iOS 12.3.1 We haven't changed since ancient times ... |
Message#7 02.12.16, 19:49 | |
a guest [offline] Group: Users Messages 7 Check in: 24.12.11 Elephone P6000 Reputation: 0 | According to good instructions from Buzaaa (post on the first page), the developer from xiaomi.eu has flashed to the firmware. Multirom th got up incorrectly - the keyboard did not appear, so it was impossible to enter data. Small explanations: 1. The loader was unlocked from under the official stable, it is not necessary to install the developer. 2. There were problems with the drivers. By default, some incomprehensible ones were being pushed: blush: after manually selecting the driver (from the already installed ones), everything worked. 3. The instruction is very detailed and following strictly according to it WILL BE HAPPINESS. Thanks again to Buzaaa for help. : thank_you:: thank_you:: thank_you: Post has been editedpanigo - 02.12.16, 19:49 |
Message#8 03.12.16, 01:59 | |
Visitor [offline] Group: Users Messages 13 Check in: 12.11.15 Reputation: 1 | Today I received Redmi 4 with aliexpress with custom Russian-language firmware. Translation of the curve, here and there pass through the English words. I want to install custom firmware from xiaomi.eu, but here it is advised to first install the official Chinese via MiFlash (to correctly unlock the bootloader), then unlock the bootloader, then install the TRWP and then from the TRWP custom firmware. Tell me, pliz, who knows - when you sew through MiFlash, is the contents of NVRAM erased or not? If it is erased, is there any way (except for custom recovery, which at this stage is not delivered) to save and then restore the contents of NVRAM? |
Message#9 03.12.16, 02:10 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1403 Check in: 01.01.14 Xiaomi Redmi 6 Pro 3/32 Reputation: 262 | Mihail_budovoy @ 12/03/2016, 00:59 Tell me, pliz, who knows - when you sew through MiFlash, the contents of NVRAM are erased flash ;) no options try thisXiaomi Redmi 3S / 3X - MIUI Firmware (OS 6.0) just take the firmware here http://en.miui.com/download-318.html Post has been editedzacev - 03.12.16, 02:41 -------------------- brick it's not scary |
Message#10 03.12.16, 14:46 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 207 Check in: 20.12.08 Samsung Galaxy Note 8.0 Reputation: 4 | Zacev @ 12/03/2016, 01:55 what for? these dances I need to flash 30 phones, and unlocking a month can be no more than 5, it seems like |
Message#11 03.12.16, 17:41 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 113 Check in: 10.02.09 Samsung Galaxy Alpha SM-G850F Reputation: 18 | lesnikov88 @ 12/03/2016, 1:46 PM I need to flash 30 phones, and unlocking a month can be no more than 5, it seems like So sew them out from under one account, why should you do everything on 30? |
Message#12 03.12.16, 21:54 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 111 Check in: 15.10.08 Reputation: 4 | Help me please. In general, everything still fails to sew the stock firmware on an unlocked phone with full cleaning (it is necessary to verify the fact of marriage, the seller asked). MiFlash all the time gives out "not enough memory to process the command." Through the built-in Update application by rebooting into Recovery also does not work, because instead of mod mode recovery, it enters the mode where the phone image is simply displayed asking to connect the cable and that's it. Remained the last couple of days to protect the buyer, it is urgent to flash the stock firmware = ( |
Message#13 03.12.16, 22:05 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1403 Check in: 01.01.14 Xiaomi Redmi 6 Pro 3/32 Reputation: 262 | Lorence @ 12/03/2016, 20:54 image of the phone with a request to connect the cable and everything. try thisXiaomi Redmi 3S / 3X - MIUI Firmware (OS 6.0) just take the firmware here http://en.miui.com/download-318.html -------------------- brick it's not scary |
Message#14 03.12.16, 22:23 | |
Novice [offline] Group: Active users Messages 42 Check in: 02.05.09 Reputation: 2 | Panigo @ 12/02/2016, 19:49 Multirom th got up incorrectly - the keyboard did not appear, so it was impossible to enter data. Tip from the site miltirom: This TWRP does not cope with the automatic installation of Gapps. Remove the /gapps/gapps-arm64-6.0-pico.zip archive from the firmware and flash it yourself through TWRP after the firmware. From myself I will add that SuperSU was also stitching separately with zip. |
Message#15 06.12.16, 19:33 | |
Visitor [offline] Group: Active users Messages 15 Check in: 24.01.16 Reputation: 0 | Try to make another backup of the phone. I haven’t done the same thing with me for 50% error. The instructions have it. 1.We connect your phone to the Mi account for which permission is received (after logging in to your account, it is advisable to do any actions with this account, for example, enter and find your phone on the i.mi.com website, backup your smartphone to the cloud, It is desirable to do this to avoid an error for 50% unlocking) I normally unlocked my phone and installed xiaomi.eu custom firmware. I did everything according to the instructions. Permission to unlock waited 2 days. |
Message#16 06.12.16, 19:44 | |
Visitor [online] Group: Active users Messages 17 Check in: 07.06.13 Reputation: 0 | [email protected], 18:50 zacev the result is zero at 50% pops a window I tried again on two computers, cleaned all drivers, rebooted, and put yours - rebooted. Maybe I did not turn something on the phone? or in Fastboot mode is it not important? Who has already unblocked? what drivers put? How do I understand the flash on the Russified firmware will not work until I unblock it? or wait for the global Please phone throughPC Suite- preferably on V8.0.3.0, then try Mi unlock. I did it for me, really suffered 4-5 hours. -------------------- - HTC One X + | iPhone 5 | Nexus 5 | Samsung S5 | Meizu MX4 Pro | Samsung A3 (2016) | Xiaomi Redmi Note 4 | Meizu M3 | Xiaomi Redmi 4 | iPhone 5S | Xiaomi Redmi Note 4X | Iphone 5C | Xiaomi Redmi 4X - |
Message#17 06.12.16, 20:08 | |
Visitor [offline] Group: Active users Messages 15 Check in: 24.01.16 Reputation: 0 | Hardy8485 @ 12.6.2016, 18:44 Run the phone through PC Suite - preferably on V8.0.3.0, then try Mi unlock. I did it for me, really suffered 4-5 hours. Is the STABLE firmware suitable for Mi unlock? The cap says that only the latest DEVELOPER is needed for unlocking. (In order to unlock the bootloader you must have the official weekly (developer) version of miui!) |
Message#18 06.12.16, 20:12 | |
Mark Knopfler fan [online] Group: Friendssavagemessiahzine.com Messages 10823 Check in: 07.12.12 Xiaomi Mi Max 3 4/64 Reputation: 4370 | YevhenPolkovnikov @ 12/06/2016, 10:08 PM Is the STABLE firmware suitable for Mi unlock? Fits, constantly unblocking them. Before updating to the current version. -------------------- Xiaomi Mi Max 3, M1804E4A - MIUI 10.3.2.0 xiaomi.eu #Magisk Apple iPad Air, A1474 - iOS 12.3.1 We haven't changed since ancient times ... |
Message#19 06.12.16, 20:38 | ||
User [offline] Group: Friendssavagemessiahzine.com Messages 83 Check in: 07.02.09 Xiaomi Redmi Note 4 3/64 Reputation: 13 | If I understood everything correctly, then I am a fool who has been doing bullshit all day. It is written in the message about 50% Couldn't verify device No need to unlock this device
And this is written by Google Translit. Failed to check the device Not necessaryto unlock this device I of course Spanish taught, but I did not see the badge that everything is OK. Now I checked everything The phone is unlocked, I apologize to everyone I approached with stupid questions, but I do not know how it was unlocked, for me it is a mystery. Post has been editedvdm2 - 06.12.16, 21:01 | |
Message#20 06.12.16, 20:44 | |
Mark Knopfler fan [online] Group: Friendssavagemessiahzine.com Messages 10823 Check in: 07.12.12 Xiaomi Mi Max 3 4/64 Reputation: 4370 | [email protected], 22:38 How can I find out if I unblocked or not. Unlocking XIAOMI bootloaders More similar questions I will not miss here. To unlock and check the status of the bootloader there is a separate topic, in the header of which there is all the necessary information. Post has been editedCamerado - 06.12.16, 20:44 -------------------- Xiaomi Mi Max 3, M1804E4A - MIUI 10.3.2.0 xiaomi.eu #Magisk Apple iPad Air, A1474 - iOS 12.3.1 We haven't changed since ancient times ... |
Message#21 06.12.16, 22:29 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 83 Check in: 07.02.09 Xiaomi Redmi Note 4 3/64 Reputation: 13 | Buzaaa For this instruction, the doshol to point 11 TWRP point 3. We connect the smartphone to the PC / laptop and copy it to the root of the internal memory (for the convenience of searching in TWRP) the firmware archives and SuperSU Stable or SuperSU Beta. Disconnect the smartphone how to do it, I'm just the first time: blush: I tried to go to "Mounting" =>"Enable MTP", but I did not see the disk on my computer. Tell the good people what to do to write xiaomi.eu to the phone. |
| mobile version | Now: 06/22/19 16:03 |
©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement