Prestigio Wize LX3 Firmware



Rep: (137)
Prestigio Wize L3 - Firmware
PicturePSP 3403 DUOBLACK
Description | Discussion пїЅ | Firmware пїЅ

Important information!
Attention!!!
Before any manipulations with the device, it is recommended to make a full backup of the system.

Solving the most popular problemHEREandHERE.
Drivers and Utilities
Official firmware
Unofficial firmware
Attached Image- firmware is completely stable, no bugs
Attached Image- workable, but there are bugs
Attached Image- not workable
Attached Image- firmware in .zip format
Attached Image- firmware in the form of backup
Attached Image- firmware in .pac format (via PC)

Android 5.x Lollipop
AOSP 5.1
Lewa os
Modified stock
StockLite (based on 0.17)

Android 6.x Marshmallow
CyanogenMod 13
Flyme OS 6

Android 7.x Nougat
In the near future it will not be exact. Since there are no kernel sources.
Useful
Instructions
Recovery
Redesign hats bydpinchyk951
There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.

Post has been editeddestroyer71 - 28.05.19, 17:15
Reason for editing: editing



Rep: (137)
* sl_a_va1 These files can be found in the header



Rep: (1)
In general, there is a trouble with this miracle to the device. When firmware PAC 1.0.7 white screen, but bodies starts and even "sings" that he is Prestigio.
It turned out to win the "blind" firmware, via ADB, versions 1.0.10, 1.0.12 and 1.0.14 (the phone was not overloaded) and voila, he started. True without a working network and with strangers IMEI. About attempts to restore the network: TWPR sews, but when entering the recovery - a white screen (which is not clear with what it is connected). And after the firmware 1.0.10 on the body, the white screen at the start.

Post has been editedClerick32 - 19.01.17, 06:34



Rep: (1)
Well, actually several questions arose:
1. What is needed to create a TWPR for "whiskers" from firmware 1.0.7 phones.
2. Can I change the modem and NWRAM blocks and NWRAM blocks via ADB (as far as actually based on thishttp: //forum.china-iph...79-1060.html#p1166247).
3. Are there alternatives to create a backup in the form of a PAC (except for the method specified in the subject)?
4. How to compare the layout of the phones based on the firmware 1.0.7 and 1.0.10 (12)?

Post has been editedClerick32 - 19.01.17, 20:29



Rep: (4)
googlehttps: //drive.google.c...zwyja/View? USP = Sharing
Yandexhttps://yadi.sk/d/LW_Q_QUY39SIBG.
So reloaded! Use guys)) successful recovery

Post has been editedAsawaqq - 19.01.17, 22:05



Rep: (0)
The same problem, with a white screen.
Who walked to win, please tell us in detail.
Thank.



Rep: (1)
If it helps in the further analysis of flights:
By brute force when the firmware through the researchdownload (each time a pair of pneuries of items) with 2 items - Eraseuboot and Uboot_Loader received a white screen on the start.
Attached Image

Attached Image

Attached Image



Rep: (0)
Maybe someone will bring to think and prompt:
If in the firmware 0.10, throw a U-boot file from update 0.14, then a logo appears for a second, and then a white screen again.
In general, you can make something from the firmware and updates something that would not be a white screen.



Rep: (1)
* XXICENTURIES,

Through the FactoryDownLoad_R4.0.0001, I stole version 1.0.7.
I downloaded adb_run. The AdB \ Sideload folder placed Update.zip version 1.0.10.
Then it was blind in the recovery (the inclusion button is 1-2 seconds and Vol + (hold some time). After that, the Vol is 1 time and the POWER button. Falling to the computer, waited for the installation of AdBinteface drivers.
Launched adb_run, chose Move ->Sideload ->Install Zip and launched the firmware. If a mistake suddenly arose tried to reboot into the recovery.
After the firmware, without shutting down the phone Vol - 1 time and the POWER button, the AdB \ Sideload folder placed Update.zip version 1.0.12. And launched the firmware.
After that, the phone starts in normal mode (though without a working network and left IMEI)



Rep: (0)
* Clerick32
Did the phone be determined in the device manager?
I have such a rope turns out - I can not flash.
Attached Image
Attached Image


Post has been editedXXICENTURIES. - 20.01.17, 23:44



Rep: (1)
* XXICENTURIES,
I have 2 devices without drivers.
Try these drivers to putAttached fileSPRD_NPI_USBDriver_1.4.rar(9.03 MB)

And yet, when entering the recovery should not work vibro.
Try to rebuild in the recovery (I checked the input. After turning on the screen and expectations, I simply press POWER on the phone and if it went into overload, it means that the recovery got okay)

Post has been editedClerick32 - 21.01.17, 00:07



Rep: (0)
Third, then from the laptop. It is not more.
It seems to have time to vibro.



Rep: (1)
* XXICENTURIES,
Well, then try to just run it (at least before musical accompaniment), and then try again to enter the recovery. I had such an error, helped the overload of Smart (pulled out the battery).



Rep: (0)
Once 20 has already tried, the error is the same



Rep: (1)
* XXICENTURIES,
In the firmware itself, Upadet.zip did not change? The first via ADB_RUN must be sewed 1.0.10.

Post has been editedClerick32 - 21.01.17, 11:34



Rep: (1)
* Clerick32
Do you have not earned a network?



Rep: (0)
* Clerick32
No, the archive took and put in the folder as you wrote.
ADB_RUN starts startup, but then the error crashes, I understand that it cannot determine the device.
The drivers have already tried everything that they advised here.



Rep: (1)
* XXICENTURIES,
I also did not get the first time. Try once again to flash through the factorydownload_r4.0.0001 here is this firmwarePrestigio Wize LX3 Firmware



Rep: (4219)
TWRP 3.0.2forPrestigio Wize L3

- based on Android 5.1 kernel firmware1.0.12 / 20160903 : Attached filerecovery.img(12.54 MB)

- based on Android 5.1 kernel firmware1.0.14 / 20161107 : Attached filerecovery.img(12.31 MB)

Stock recovery
- from firmware1.0.12 : Attached filerecovery.img(10.12 MB)
- from firmware1.0.14 : Attached filerecovery.img(10.12 MB)


Post has been editedjemmini - 27.08.17, 12:39



Rep: (1)
say thanks* jemmini
TWRP works on whitewaying phones



Rep: (0)
* Clerick32 How to slip it there?


Full version    

Help     rules

Now: 14.01.21, 01:31