Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
ZTE Nubia Z11 Mini S - Official firmware |
Message#1 04.11.16, 13:59 | |
Mr. Fundamentals [offline] Group: Friendssavagemessiahzine.com Messages 1348 Check in: 23.04.12 Oneplus 5T 6/64 Reputation: 1076 | ZTE Nubia Z11 Mini S - Official firmware NX549J Description | Discussion � | Purchase � | Accessories � | Owners Club � | Camera talk � | Unofficial firmware � | Official firmware � Important information! The most frequent problem The device swears and gives errors of Google Services. "Google Play Services" Error Occurred! Solution Go to Settings - Applications - All - Google Play Services - Scroll to the very bottom (Permissions, click and allow everything. We perform a similar procedure in Google Play Market and with all possible Google applications, Reload After that it will work fine! Drivers and Utilities Automatic driver installation ADB (Android Debug Bridge) driver Nubia Emergency Tool(official phone recovery utility) Firmware Official Chinese firmware (Russian language 85%) Official firmware page on the Chinese site Nubia Official firmware V1.20 dated 11/01/2016 (stable release) Official firmware V1.23 from 11.11.2016 (stable release) Official firmware V1.27 from 12/06/2016 (stable release) Official firmware V1.30 from 01/04/2017 (stable release) Official firmware V1.32 dated February 23, 2017 (stable release) Official international (global) firmware (Russian is 100% Google Play by default) Custom and modified firmware (almost all Russian language 100%) Global 2.01 modification with working NFC - by Estakon Modificationfromcrocodil2 Modification V1.09 and V1.30, 1.32froma_bait Modification V1.27fromloly Instructions Instructions for setting up notifications Instructions for those who want to simply and easily flash any official Nubia z11 mini S firmware Instructions firmware from China to globalku through the "Three points" Instructions in pictures for installing custom recovery TWRP Instructions with pictures how to install globalku completely using TWRP Instructions for the initial preparation of the device to work Detailed instructions on the initial firmware and installing Gapps for beginners Backup NV, EFS parameters on Nubia smartphones Another way to backup nvram (efs) Brick repair service (UnBrick) TWRP General Instructions Work with fastboot Backup from phone to PC via ADB Stock mail client Stok_Email_Nubia_v1.30.zip Installing firmware 2.1 and connecting NFC, setting AP Root / Recovery SuperSU(universal utility for getting root) TWRP 3.0.2-0fromTimeNavigator+ in styleNubia edition TWRP 3.1.0-0fromSiyang+ in styleNubia edition Modification patch for Android pay on stock Chinese firmware Crutches for setting up Google applications A set of different Emoji to install via Recovery Patch on system animations in the style of iOS Themes for NubiaUI Google Apps Package(choose Platform: ARM64, Android: 6.0, Variant: pico, nano or micro) Xposed for NubiaUIandXNubiaUI modulefromSolarwareare Xposed for NubiaUIfromWuxianlin Patch on the dialer(contacts, SIM card settings) fromcrocodil2 Mod dialers with an enlarged contact photofromMolodoy63 Camera enhancement patch(bitrate, photo quality, Camera2 API) fromcrocodil2 Modification of Lockscreenwith carved chinese fromMolodoy63 Speed ​​Expansion Patch for Wi-Fifromcrocodil2 Patch to correct the work of NFCfromcrocodil2 Flycow logging and malware removal patchfromcrocodil2 Mod dialer for globalki 2.01 miscellanea ZTE Nubia Z11 Mini S Modems If after the firmware does not fit the existing key or fingerprint How to switch from Chinese to Russian in TWRP Increase / decrease sound volume Setting up notifications from applications on the official firmware Remove Chinese from phonebook and SMS Correction - in the sound settings files were displayed with hieroglyphs Network type switching Deleting network informational messagesandsame through ADB Service codes for the Nubia line Support page on the official Nubia forum(Chinese) Zhiyoo forum support page(Chinese) All about Xposed Framework FAQ In the stage of filling ... At the moment, there are Global firmware with 100% Russian language and Google services, as well as Chinese with 85% Russian without Google Services, as well as custom-based drain, as well as Cyan and Mui. Main question:I am flashing to the international version 1.09 according to the instructions from the header (or to another), the phone hangs on the stage with the inscription "be yourself", what should I do? Answer: Clamping power + vol down. There is a reboot. Buttons do not let go. We fall into the menu - reboot to nubia emergency. Reboots. We select english, wipe data, we demolish all 2 points that is there. Reboot. The system boots normally. 1 Question: In the air, what firmware will be updated, except for the one that costs from the factory? Answer: Only official unmodified firmware without root will be updated correctly in the air. In other cases, even if the update arrives, the system will not pass the test and will not deliver the update. After installing GAPPS on Chinese firmware, the update will not come up. Also through the program OTA-Update updates its MODs crocodil2 2 Question:The device swears and gives errors of Google Services. "Google Play Services" An Error Occurred! Answer: Go to Settings - Applications - All - Google Play Services - Scroll to the very bottom (Permissions, click and allow everything. We perform the same procedure in Google Play Market and with all possible Google applications. After that it will work fine! 3 Question: Which Android firmware? Answer: Original firmware on 6.0.1 4 Question: Internet does not start (3g, 4g) Answer: In the SIM card settings, delete the APN and create it again.ZTE Nubia Z11 Mini S - Discussion 5 Question: If there is no tab about the software update? Answer: So the seller was flashing the phone. 6 Question: Launchers are put on the phone, for example, NOVA.? Answer: no problem, I sit on the Nova myself. 7 Question: How to delete the left screen of the launcher with the camera settings? Answer: Settings - additional specials. Opportunities - to show the first raster negative. 8 Question:Does NFC work? Answer: Someone works for someone else, there is no 100% answer to this question. The maximum work in the firmware from crocodil2, if it does not work here, we are waiting for the firmware updates from the Chinese. 9 Question: How to remove the sound of the screen saver when you start the phone? Answer: "Settings / Sound / Other Sounds / Mute Sound" 10 Question: How to make an application system? Answer: Boot into TWRP. Mount the "System" section. Transfer the software you need from data \ app (priv-app) to system \ app (priv-app). Permissions can not be set (they already exist). The application becomes a system. And he becomes allowed to work in the background normally. 11 Question: Who saw where the smart lock settings in our phone? Answer: HEREZTE Nubia Z11 Mini S - Firmware 12 Question: Solving the problem with the graphic key in TWRP and when entering the smart (when asked to enter the key before downloading the android) Also, it does not allow to put OTA from crocodil2 Answer: HEREZTE Nubia Z11 Mini S - Firmware 13 Question: Messages about missed calls on the lock screen are displayed or not? Answer: YES! 14 Question: Is there a photo of the disassembled phone? Answer: HEREZTE Nubia Z11 Mini S - Discussion 15 Question: Please tell me how to defeat overlays in the global firmware? Answer: Disable the second screen. 16 Question: A phone came from China "what, it does not work" for exampleThe flashlight does not turn on in the curtain, there is no firmware update menu, what to do? Answer: Most likely you have custom Chinese firmware, rewrite your phone to another firmware. 17 Question: Is it possible to install the theme on the International firmware? Answer: Not yet. M Dear users!Discussion on the work of Android Pay is transferable to topicsAndroid Pay does not start(rooted devices) or in the very theme of the applicationAndroid Pay(no root). In this topic, this is offtopic. Ignored this warning, day RO without warning. There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators). Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links. Post has been editedVolkoffstein - 10.07.18, 17:16 Reason for editing: Instructions for configuring notifications |
Message#2 04.11.16, 15:42 | |
Mr. Fundamentals [offline] Group: Friendssavagemessiahzine.com Messages 1348 Check in: 23.04.12 Oneplus 5T 6/64 Reputation: 1076 | Instructions for the initial preparation of the device to work (installation of custom recovery, Google Apps, root-rights) 1. Installing drivers in the system and preparing the phone for firmware. - In the phone menu, go to the "About phone" section and several times press the line with the build version, as a result of which we have access to the developer settings (the system will notify you with a pop-up notification). - Return to the general menu and see the appeared section "For Developers". Go to it, find the option "Debug USB" and turn it on. Thereby we open access to ADB. - ADB can also be activated via a combination in the dialer * # 7678 #. Having executed it you will have a menu from two points. We select there ADB port - We connect the phone to the PC through the cable in the CD-driver mode and the system will automatically install all the necessary drivers. If the drivers themselves are not installed, you can use the driver installers from the header. 2. Install TWRP - TWRP can be delivered according to the instructionshere, skipping the driver installation steps in it, since we also described them in paragraph 1 of this instruction. 3. Working with TWRP, installing firmware, Google services, etc. - Depending on what actions you have performed in step 2 of this manual, if you successfully TWRP firmware, download the utility directly into it or return to the system. If the recovery did not load itself, then you can get into it by holding down the "minus" and the power button. From under an already running system, you need to wait for two vibrating signals, from under the off state of one, and then release the buttons. You will be taken to the TWRP menu. General descriptions can be foundhere - First of all, just in case you need to make a backup of your current system and all programs. In the Backup menu, select at least partitions System, Data, Boot, Recovery to be able to roll back in case of problems through Restore. At least once it is recommended to backup all partitions that are available in the recovery menu just in case. - We drop everything we want to flash into the phone’s memory or on the SD card. This may be the necessary firmware in ZIP format, Google Apps archive, SuperSU archive. - Google Apps Archive taken from the sitehttp://opengapps.org/We select there Platform: ARM64, Android: 6.0, Variant: pico, nano or micro (large ones can not stand up). - To get root use the utilitySuperSU, version for recovery. - Installation of all of the above is highly recommended to do on a clean system. Therefore, in TWRP, we need to do a Factory Reset in the Wipe section or manually select the Data and Cache sections for formatting (this is essentially the same thing). After wipes, reboot recovery (Reboot - Recovery) - In the Install menu, we select the archives we need for sewing through the file manager of the recovery. You can add multiple archives to the queue. First we sew the main firmware, then Google Apps, then SuperSU. There is no need to reboot between them. - After flashing all the archives, we successfully reboot into the system, wait for the system to boot, we get a fresh firmware with gapps and root, set it up and use it. Post has been editedJohnMcClane - 04.11.16, 16:18 |
Message#3 04.11.16, 16:18 | |
Mr. Fundamentals [offline] Group: Friendssavagemessiahzine.com Messages 1348 Check in: 23.04.12 Oneplus 5T 6/64 Reputation: 1076 | TWRP 3.0.2-0 from TimeNavigator from 11/05/2016 Description Custom recovery for Z11 Mini S with automatic installation through a bat-file. From me, the teams in the batch file have been translated into English. Bugs and opportunities are not described by the author. Installation 1. Download the archive and unpack it in a convenient place, preferably to the root of the disk. 2. Dial in the dialer * # 7678 # and activate the ADB port 3. Activate the developer settings by clicking on the build version several times in the menu About phone. 4. In the developer settings, enable USB debugging mode (USB Debugging) 5. We connect the phone to the PC in the CD driver mode and install all the necessary drivers. 6. In the downloaded archive, launch Start.bat in administrator mode and select the desired operation. Follow the script prompts. - Flash TWRP - Installing custom recovery - Flash Official recovery - Installing Factory Recovery - One-time start TWRP recovery - Run TWRP once Changes from 01/28/2017 1. Removed all languages ​​except English and Russian (English starts at the start) 2. The names of the partitions for mounting were slightly corrected (the modem itself is now Baseband, NV data as NVRAM) and the name of the external partitions 3. Added additional sections for backup: aboot, rpm, tz, mdtp, modem, hyp, sbl1, dsp, splash, recovery2, oem 4. SuperSU updated to 2.79 Pro Download NubiaZ11miniSTWRP.zip(36.97 MB) Download Nubia Edition IMPORTANT! For the absolute majority of cases, backing up and restoring system, data, boot partitions is sufficient. For even rarer cases, recovery and cache. Do not touch other sections unnecessarily (do not back up or restore), since they are not touched by flashing and go to the boot chain, the departure of any of these sections can wrap your device in brick on level ground! Post has been editedJohnMcClane - 16.02.17, 21:56 Reason for editing: Update as of February 16, 2017. TWRP Nubia Edition |
Message#4 05.11.16, 09:38 | |
Dependent [offline] Group: Friendssavagemessiahzine.com Messages 544 Check in: 07.08.12 Xiaomi Mi Mix 2S 8/256 Reputation: 92 | JohnMcClane, Today came outa new version,Like they fixed the inability to receive OTA. Now updates should work Perezalili on poison.Mirror on YandexRepacked files that were password protected. The original archive also left. Files did not translate Post has been editednecros911 - 05.11.16, 10:06 Reason for editing: Mirror on Yandex -------------------- Kuzma Skryabin - Vichna Tobi Pamyat! R.I.P. |
Message#5 05.11.16, 11:59 | |
Dependent [offline] Group: Friendssavagemessiahzine.com Messages 544 Check in: 07.08.12 Xiaomi Mi Mix 2S 8/256 Reputation: 92 | First customfrom the Chinese team:Download from Yandex (Yandex swears that there is a virus in the archive! My antivirus is silent, so at your own risk) Original thread onoff-forum. Changes: -Ruth - processor control - interface optimization - other changes Installation:via TVRP Post has been editednecros911 - 05.11.16, 12:07 -------------------- Kuzma Skryabin - Vichna Tobi Pamyat! R.I.P. |
Message#6 05.11.16, 12:06 | |
Dependent [offline] Group: Friendssavagemessiahzine.com Messages 544 Check in: 07.08.12 Xiaomi Mi Mix 2S 8/256 Reputation: 92 | Second customfrom the Chinese team:Download from Yandex Original thread onoff-forum Changes: -Ruth - minor optimization - based on firmware 1.20 Installation:via TVRP Post has been editednecros911 - 06.11.16, 09:56 -------------------- Kuzma Skryabin - Vichna Tobi Pamyat! R.I.P. |
Message#7 05.11.16, 14:40 | |
PersÅna suspecta [online] Group: Honorary Gameday Messages 8742 Check in: 12.05.13 Samsung Galaxy S9 Plus Exynos Reputation: 1757 | M We move to subsection:ZTE A fruitful discussion. -------------------- Do you think all that simple? Yes, everything is simple. But not at all. A. Einstein. |
Message#8 05.11.16, 20:10 | |
Mr. Fundamentals [offline] Group: Friendssavagemessiahzine.com Messages 1348 Check in: 23.04.12 Oneplus 5T 6/64 Reputation: 1076 | Official firmware V1.20 dated 11/01/2016 Description The first official full firmware for the NX549J. Nothing is cut from the firmware. Perezalito as it is from the official site. Descriptions of changes and functionality not. Installation We put through TWRP or standard recovery. It is possible to install without wipes in the form of an update. We get into the recovery either through the update menu in the system, or through the minus combination and the power button. Download from Cloud.Mail.ru(mirror) Download from Baidu(password: 1p28) MD5: C17A34601F3EA0C17C7932B314ACD461 |
Message#9 10.11.16, 12:09 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 601 Check in: 25.10.16 ZTE Nubia Z18 Mini Reputation: 467 | How to flash Google Applications GAPPS in ZTE Nubia Z11 miniS? Allowance for Krivorukov: lol: Special thanks are announcedJohnMcClane Dstear Motimilian Onarion DennyShtirlizfor moral and practical support in this matter! So, you have the NX549J phone on your hands and the Nubia UI 4.0 stock firmware. Task: flash gaps into the phone. To do this, you will need a computer / laptop (the example is filed with Windows 7), the phone itself, the USB cable that comes with it, and the programs you downloaded beforehand, with which you will carry out all operations with the device, this is: - nubia ToolStudio (English) 4.5.44 - NubiaZ11 miniSTWRP - open_gapps-arm64-6.0-pico FIRST STAGE: CREATING BEKAP TELEPHONE SETTINGS. First you need to make sure that you will backup all phone data if you want something. In order to return everything as it was in the case of capturing, you must ALWAYS make a QCN – recovery file. 1. We connect the included phone to the computer through the wire, on the device in the drop-down menu from the bottom we select “charging onlyâ€. In My Computer, instead of a phone, a type of CD icon will appear! On it, the driver manufacturer has already recorded. Launch Autorun and install this driver. Everything passes automatically and after a couple of seconds you will see a hint in the tray saying that the driver is installed and ready to work. 2. Disconnect the phone from the computer and go to the phone’s menu options and go to the phone section, there we find the build version and tap it until we become the developer (the phone will signal with a pop-up message). 3. Go to the developer menu and enable USB debugging mode (debugging ADB), do not touch anything else there. Exit the menu. 4. We connect the phone to the computer again, again the system will automatically install the driver itself, just wait for the pop-up message in the tray that everything is installed and ready to work. Then disconnect the phone again. 5. Turn on the dialer on the phone and enter * # 7678 # immediately after you enter the last grid you will be transferred to the menu, where there will be only two options with squares. You need to enable (tick) the factory port (factory port). And press the back key. 6. Go to the Device Manager on your computer and now connect the phone with the factory port already turned on. After you refresh the devices, a new COM port will appear in your list, we just need it. Right-click on it and go to properties. There on the tab parameters of the port we set 115200 bps at the highest value. We do not touch the rest. We do not turn off the phone. 7. Install nubia ToolStudio on your computer or laptop. Run the program itself. Select Tools / Settings. The top line needs to be 115200. The bottom four must be zeros. 8. In the same program on the right in the vertical menu, select the section Backup (black and white Maltese cross). We look to the right. There, next to the settings there is a button of the green hammer. Settings, press it and set the top line to the value 115200, and the SPC should be in manual (000000). Then exit the settings. 9. Your phone should always be connected to your computer without removing the cable. The factory port is visible only when the phone is on! 10. In the program nubia ToolStudio click Refresh (green arrows), you should have a COM port in the table. If it does not appear, disconnect and connect the phone again, it should appear. 11. In the File path: line, you need to select the location where you want to save the QCN archive. Then just press the Start All button on the panel. In a minute and a half, you will have 100% backup ready - congratulations! If you collect something, you can restore everything by selecting the Restore tab. Disconnect the phone from the computer. 12. Turn on the phone in normal mode and enter * # 7678 # in the dialer. Close the factory port. With this stage, everything. SECOND STAGE: TVRP FIRMWARE (custom recovery) On the phone ZTE Nubia Z11 miniS correctly install the gaps while you can only through this recovery. I tried without it in different ways - unsuccessfully. Recovery will have to sew in any case! 1. USB debugging is still enabled on your device so that you are ready for the firmware in principle. On the computer you have downloaded NubiaZ11 miniSTWRP. 2. Connect the phone to your computer. On the phone, select in the pop-up menu - file transfer. Go to the root folder of the phone and copy the open_gapps-arm64-6.0-pico-20161109 archive there (pico works exactly, only the necessary ones are there, I did not check other archives if you need to download other micro or nano options). Disconnect the phone from the computer. 3. Turn off the phone. Enter the bootloader mode (this is a bios type) - you need to simultaneously hold the power button and the volume rocker down key (-) and hold until you get into this mode (like a black screen with a menu). We connect the bodies to the computer through the stock cable. 4. Go to the folder TvRP on your computer and run Start.bat. In the blue window, you will be prompted to make a choice, enter 1 "TWRP flash" and enter. The download starts, it will ask you to press any key. You will see the lines "OK" so everything is flashed. The program will prompt you to press any key in order to load the phone in the mode of updated custom recovery. 5. If everything turned out correctly, when you turn on you will see a recovery in Chinese. There will be two rectangular buttons, you need to click on the right, this is the choice of language. There is even Russian. Then everything will be clear. The phone from the computer can now be safely disconnected. 6. We make the svayp to the right and enter the main menu of the new custom recovery and DO BECAP FOR THE BEGINNING !!! (second left button on top) THIS IS MOST IMPORTANT !!! If backup is ready you are ready for the last stage! THIRD STAGE: OWN INSTALLATION OF GAPS! Gaps are installed directly in the recovery. Before that, as you remember, we dropped the downloaded archive with these gaps into the root folder of the phone, if you did not, you can turn on the device in normal mode and copy the archive with services you need and turn off the phone. 1. Go to the custom recovery, turn on the phone with the power button and the volume button up (+) simultaneously pressed. 2. Select the installation button in the menu (the topmost one on the left) and select our archive with gaps from the list (it will be at the very bottom usually). We confirm the installation by swiping to the right. 3. After a short time, the line will signal you that the installation was successful and ask you if you want to delete the cache. I chose to remove. Reboot and turn off the phone. 4. Now you need to reboot in the Emergency Recovery. You need to turn on the phone with the power key and the volume down (-) button simultaneously pressed. In the bootloader menu, use the volume keys to select the item Reboot to nubia emergency recovery and press the power button confirming the choice. 5. The phone will boot into the stock emergence recovery. Choose English, and then Wipe Data. You need shorter ALL (!!!) clean up Applications and Cache partition. After selecting the menu, you will need to confirm everything.APDATE Onarion:You can not overload it in emergency recovery, but do wipe directly from TWRP. There is a corresponding section WIPE / Clear. Select Cache + Davlik + data in it. 6. Now the phone will reboot and launch introductory pictures, but for quite a long time (maybe a minute or a half) will be delayed showing the inscription Be Yourself! Do not be scared! After a while, you will see a red flower NUBIA UI logo and a progress bar that should be completely filled. Upon completion, the phone will turn on in normal mode. 7. We are starting to set up the phone from scratch just as if you were the first to turn it on! When all the settings when you turn on configure on the screen you can expect an error from Google, it should be so. So that Google does not swear go to Settings - Applications - All - Google Play Services. You need to give all permissions to Google services. Scroll to the bottom and allow everything. If you installed a bunch of Google services other than Play Store, they all need to be given permission. They will all be in alphabetical order (after the letter G) in the list of programs. Reboot and enjoy! : thank_you: Post has been editedIuriius - 29.10.17, 12:04 Reason for editing: raised in the topic header |
Message#10 10.11.16, 13:59 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 313 Check in: 03.05.15 ZTE Nubia Z11 Mini S Reputation: 47 | Rostyn1112, Ak_Kate, The video has already been filmed.Here isandhere. Use;) Phone is different, but all the same. And if it helped, do not forget to thank the author of the video data.Lepi. Post has been editedMotimilian - 10.11.16, 14:08 |
Message#11 11.11.16, 02:20 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 601 Check in: 25.10.16 ZTE Nubia Z18 Mini Reputation: 467 | My QCN archive is for my phone only!Each individual device will have its own IMEI codes and so on. The instruction was written in detail by me, the same simple person as all other ordinary people without skills of work of such a technical level. Today it is licked, polished, polished andCHECKED PERFORMANCEwith the assistance of the guys on this forum (their names are listed at the beginning of the manual, feel free to contact them if something is not clear).JUST FOLLOW THE STEPS THAT ARE DESCRIBED THROUGH ITEMS AND EVERYTHING!It is really easy. And the firmware video should be shot by that person who: - there is a sincere desire to help - there is an apparatus than to shoot - have video editing skills - who can talk on camera - who can explain intelligibly - which has time for all this !!! (I'm a busy person, litter) : thank_you: Post has been editedIuriius - 11.11.16, 02:26 |
Message#12 11.11.16, 07:05 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 601 Check in: 25.10.16 ZTE Nubia Z18 Mini Reputation: 467 | I have a phone from the very first batch from the factory and the firmware was actually installedNX549J_CNCommon_V1.16. List of changes from 16 to 20, unfortunately, I can not find it yet. Update to new version is very easy., you just need to download the archive with the new firmware version and reset it to the root folder of the phone. Then go to the system update section and select manually from the specified location. It will install and reboot itself. That's all. WHEN UPDATING THE SYSTEM, THE PLASTIC TVRP IS REPLACED WITH STOCK. SHOULD SEW TVRP AGAIN. GOUGL SERVICES ARE ABOLISHED IN THIS CASE. ALL GAPS ARE TALKING NANOVO COMES, for now. Post has been editedIuriius - 11.11.16, 08:02 |
Message#13 11.11.16, 23:36 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 485 Check in: 16.06.10 ZTE Nubia Z11 Mini S Reputation: 37 | |
Message#14 12.11.16, 20:44 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 391 Check in: 13.02.13 ZTE Nubia Z11 Mini S Reputation: 39 | maks_mit, Here isthe man has already received a phone from SkyVey. Apparently they put him caste. It has the Ukrainian language. There is a photo. |
Message#15 13.11.16, 03:43 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 601 Check in: 25.10.16 ZTE Nubia Z18 Mini Reputation: 467 | Honestly, guys, I am impressed ... in three weeks already three assemblies 16, 20 and 23 ... At this rate, you can use Google for updates and overtake with epl: D As for the process itself, by OTA it flew and I even downloaded it, but when the installation time comes, the device reboots into the custom recovery I’ve previously stitched and does NOT correctly get up from there. I had to look for a solution on how to upgrade. I downloaded the full official archive from the canoe and merged it onto a cd-card. Then from the bootloader I loaded into the Emergency Recovery and installed version 1.23. Of course, my custom TVRP flew off replacing the stock. Accordingly, the gaps began to swear, I had to put everything on a new one. We need to come up with some way to constantly do not bother. I can not say that the yellowness of the screen is completely gone, maybe this is how I see it. In short, I can not objectively judge. Need a second opinion of a person with different eyes. In short, the phone is actively finished, this is very pleasing. :-) Post has been editedIuriius - 13.11.16, 04:23 |
Message#16 13.11.16, 14:52 | |
Mr. Fundamentals [offline] Group: Friendssavagemessiahzine.com Messages 1348 Check in: 23.04.12 Oneplus 5T 6/64 Reputation: 1076 | Official firmware V1.23 from 11.11.2016 Description, Changes 1. Improved system stability 2. Optimize sensor response while charging 3. Optimization of the display color (care in yellow / red) 4. Fix power ranking (?) 5. Fix application center errors 6. Camera optimization 7. QQ upgrade to version 6.3.28 8. Fixed black screen in display transfer via QQ 9. Fixed delay in receiving / sending letters in QQ 10. Optimization of the lack of sensitivity at the bottom of the screen when working in split-screen 11. Fix off the screen when running the e-book application 12. Split-screen is disabled by default. Installation We put through TWRP or standard recovery. It is possible to install without wipes in the form of an update. We get into the recovery either through the update menu in the system, or through the minus combination and the power button. Download from Cloud.Mail.ru(mirror) Download from Baidu(password: k88j) MD5: B5C524DA702EB5C6D27E774B8E960735 Post has been editedJohnMcClane - 13.11.16, 14:52 |
Message#17 13.11.16, 18:50 | |
Guru Engineer Radio Technician [online] Group: Friendssavagemessiahzine.com Messages 13232 Check in: 31.05.07 ZTE Nubia Z11 Mini S Reputation: 1489 | Check the camera patch, until the first version. What is done: Maximum compression is removed in jpg Camera 2 is turned on from Google. Video bitrate increased by 2 times in modes 720,1080,2k, 4k. (Not done) The sound is now written with a bit rate of 256 kbps 48kHz. (Not done yet) How to get the body will be tests with 120 frames. Installation via TV. After updating the firmware patch is not necessary to update! Backup system is required. And another patch record on an external card. Both patches are not tied to the firmware numbers, they are suitable for everyone while the body is on Andrew 6.0.1 Added: 1.patch for camera rollback 2.Patch for not removing gaps when flashing. Ps: for the test of the camera patch, thank you so muchsnsh This is the only one who did not get cold. Attached files camera_tweak_Z11_miniS_otkat.zip(176.25 KB) Google Gapps_no delete.zip(133,09 KB) ExtSD_Fix_rw-signed-v1.9b.zip(4.42 KB) camera_tweak_Z11_miniS_6.0.1v3.zip(142.6 KB) Post has been editedcrocodil2 - 20.11.16, 20:13 -------------------- ZTE Nubia Z11 Mini S,Xiaomi Redmi 3, Jiayu S3 Advanced, Voyo Vbook v3 i5, Cube T7, Samsung SHV-E210S, Gome K1,XiaomiR3Club |
Message#18 20.11.16, 15:25 | |
Guru Engineer Radio Technician [online] Group: Friendssavagemessiahzine.com Messages 13232 Check in: 31.05.07 ZTE Nubia Z11 Mini S Reputation: 1489 | Through the efforts of a single user snshWe meet the doped and working patches on the camera and much more. It remains to hear suggestions for improvement. ZTE Nubia Z11 Mini S - Firmwares (Fast crocodil2 # 55061787) Third-party camera for high quality and tests. Attached files better camera.zip(13.05 MB) Post has been editedcrocodil2 - 20.11.16, 15:27 -------------------- ZTE Nubia Z11 Mini S,Xiaomi Redmi 3, Jiayu S3 Advanced, Voyo Vbook v3 i5, Cube T7, Samsung SHV-E210S, Gome K1,XiaomiR3Club |
Message#19 23.11.16, 21:04 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 391 Check in: 13.02.13 ZTE Nubia Z11 Mini S Reputation: 39 | I posted official firmware on GoogleDrive Official firmware v1.23 on GoogleDrive Official firmware v1.20 on GoogleDrive Post has been editedDedok2012 - 23.11.16, 22:01 Reason for editing: Added firmware 1.20 |
Message#20 24.11.16, 12:01 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 247 Check in: 25.01.12 Oneplus 6 8GB RAM Reputation: 33 | On firmware 1.23, this Xposed was started -xposed-v83-sdk23-arm64-nubiaUI-edition-by-SolarWarez-20160427 (download) taken from the topic aboutXnubiaUI (link to the topic) module itselfXnubiaUI, at the moment, does not work with our device and causes a cyclic error in the system interface. : girl_cray: Post has been editedartichaser - 26.11.16, 10:59 Reason for editing: corrected link |
Message#21 25.11.16, 13:41 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 247 Check in: 25.01.12 Oneplus 6 8GB RAM Reputation: 33 | Setting up valid notifications from applications on officialChinesefirmware (v1.23 v1.27 v1.30) Apparently, this is a certain featureNubiaui, thanks to which applications, by default, do not have access to display notifications in the status bar and notification panel. On redmi 3S I have, in the notification panel the weather from the Gizmeteo application and various notifications from other applications were constantly displayed. After transferring applications toNubia Z11 miniSIn the notification line is empty, lost control of players "from the curtain." However, the problem was solved. - The first thing that should be done with important applications is to prohibit their unloading and closing. This is especially true for various instant messengers and social network applications. To do this, you need to start the application, then by long pressing the central round button to calllist of running applications. Click on the desired application and drag it down. A lock icon will appear above the application. Now, after optimizing the processes of the phone and cleaning the RAM, the important application will not be closed. Repeat the procedure returns the application to normal operation. - Now important applications should be added to "Startup". This will allow applications to automatically start after rebooting and turning on the phone. To do this, we find on the phone programneoSafe, this is a certain analogue of the Service application in the MIUI shell, in it we open -Permission, Further -Power-on speedup. A window will openAutostart managementwith a list of all applications. Applications with autorun should be ticked. - The last thing you need is to give applications the rights to access the notification bar (and the lock screen, if required). Open the phone settings, then go to the menu -Alert Center. Choose -Application Notification. A list of installed applications will open. Here, for each application, you can customize the display of notifications. To do this, select the application, activate, in a new window, tick -Reminder, and then we give the application access to the lock screen, the notification line, the event indicator. In the same place, you can choose the form for displaying notifications on the lock screen - minimized or detailed. On the menu -Application Notificationthere is one more item -Control(highlighted in green), in which you can quickly give applications access to the notification line and the lock screen by ticking the desired application. To confirm the changes here you need to clickOK(If this is not done and leave the list - the changes will not be made!). Further, an example of all items based on the application.Viber: Addition: Not necessarily from the task manager (long press the home button) for each important application to put the lock. There is a more convenient solution (suggestedNuke142). In the applicationNeoSafe- go toCleaner- Next gear icon - and finallymemory whitelist. Here you can add applications that will be prohibited from unloading. In fact - this is an automatic setting locks. If you remove the lock from the application manager, after that, the application will be removed from the whitelist as well. Post has been editedartichaser - 27.01.17, 12:47 Reason for editing: the addition of the post |
mobile version | Now: 04/30/19 12:14 |