[X]Assistant

[artem1701]

Orange Pi PC 2 | Orange pi zero | Orange pi lite | Orange pi prime | Orange Pi Plus | Orange Pi 2G-IOT | Orange Pi Zero Plus 2 | How do I get an Orange Pi?

Orange pi zero

Important information

• In the subject are allForum Rules, Rules section "My computer (desktop)", 10 commandments novice who is hard to master the Rules of the Forum
  
• Discussion of devices not related to this topic is prohibited. If the theme you need for a specific model does not exist - create it.
  
• Instead of saying “Thank you!” Use. If you have less than 15 posts - click on the button.under the message where they helped you, and write thanks.
  
• Useful topics to note:Forum FAQ, How to search the forum?, How to remove the image under the spoiler.
  
• If you are new to the forum, then you should know that there is a search and perhaps your question has already been answered! Also check the cap.
  

Specifications

SoC: Allwinner H2 (+) quad core Cortex A7 processor @ 1.2 GHz with Mali-400MP2 GPU @ 600 MHz
System Memory: 256MB or 512MB DDR3
Storage: micro SD card slot
Connectivity: 10 / 100M Ethernet + 802.11 b / g / n WiFi (Allwinner XR819 WiFi module)
USB: 1x USB 2.0 host ports, 1x micro USB OTG port
Expansion headers: 26-pin “Raspberry Pi B +” header + 13-pin header with 2x USB 2.0, TV out, microphone and IR receiver signals
Debugging: 3-pin header for serial console
Misc: 2x LEDs
Power Supply: 5V via micro USB port or optional PoE
Dimensions: 52 x 46 mm
Weight: 26 grams

A photo

OS / OS Installation Instructions

Orange Pi - supports ArmLinux, Lubuntu, Raspbian, Android, Kali Linux, Openwrt , Debian , Diet PI , Ubuntu and etc.
Instruction :
We will need:
• HP USB Disk Storage Format Tool
• Win32 Disk Imager
• SDHC card (at least 4GB / 6 class)
The following is a description of the OS installation:
1. Format the SD card using HP USB SFT. To do this, select the letter of your SD card in the program (for example, F: \), tick the Quick Format box and select FAT32 FS.
2. Open an OS image in Win32 DI, select your SD card, click on the "Write" button
3. It remains to insert the card in OPi and boot.Does not apply to Android.
Installing Android:
1. Insert the micro SD card into the computer. Remember that the card must be at least 4 GB and its class must be at least 10th. Best suited for this card brand SanDisk.
2. Download the official Anrdoid distribution from this link:http://www.orangepi.org/downloadresources/.
3. Unzip the "Android".
4. Download the "PhoenixCard" program from this link:http://orangepi.su/files/PhoenixCard.rar
5. Unzip the "PhoenixCard" and run.
6. In the window that opens, specify the path to the memory card, in the "Write Mode" section, specify "Product" and click "Format to normal".
If everything goes well, you will see the message "Format card to normal mode success".
7. To write the OS "Android" on the memory card, specify the path to it in the column "Img file", in the column "Write mode" select "Startup" and click "Burn".
8. At the end of the process, click "Exit".
Done! Now you can insert your card into the computer "Orange Pi" and run it. Remember that the first launch lasts longer than usual!
P.S. In order to avoid overheating your OPi do not turn it off with the command shutdown on Armbian because the latest builds have this problem.

Useful Information / Instructions / Links

• Comparing OPi Models
  
• Retro Pi full for orange pi zero
  
• Pinout scheme for connecting UART
  
• Test operation of a 0.96 "inch display (ssd1306 chip) on an i2c interface
  
• Scheme
  
• i2s on Orange Pi Zero:
  Part 1
  Part 2
  Part 3
  Part 4
  
• How to turn off the power saving mode of the WiFI chip
  
• TV OUT setting
  
• SPDIF OUT Setup
  
• IR Sensor Setup
  
• Connect to PC via USB and subsequent control via Linux
  
• Record uboot on spi flash with subsequent download
  
• Flashrom SPI - write SPI flash under linux
  
• Orange Pi Zero miZy SPI flash image - test SPI flash firmware
  
• About heat and processor frequencies
  
• Table of frequencies and voltages for orangepizero.fex - fix heating
  
• OrangePi Zero DJVU Diagram + PDF
  
• Tracking changes in GPIO values ​​via epool (IRQ)
  
• Forced FEL activation via sd card
  
• Screen connection
  
• Instructions for connecting the display on the ili9341 320X240 SPI chip to the ORANGE PI ZERO
  
• Connecting the display SPI OLED ssd1306 spi
  
• Disable TV output
  
• Mirror for downloading official images of distributions
  
• How to make OPi Zero boot from USB
  
• Connect USB printer to OPi
  
• Thermocouple connection with MAX6675 converter to the Opange Pi Zero board
  
• Audio line out
  
• OPi power from Li-ON battery
  
• Connect NRF24l01 to ORANGE PI ZERO
  
• DietPi for Orangr Pi Zero H2 ARMv7 Stretch
  
• Orange Pi Zero, install Logitech Media Server and SqueezeLite
  
• Connecting and configuring the IR remote on Debian
  
• Connecting and setting up the IR remote control on Armbian Stretch
  
• Pure image of Diet Pi based on Armbian Strech
  
• Logitech Media Server, we pull music from Youtube.
  
• Connect all 3 usb to work (OpenWrt)
  
• Support for xr819 radio module on OPi Zero has been enabled on OpenWrt_LEDE-18.06.2

If you want to buy

You can buy off. Store (Aliexpress):tyk

User activity

Off site -tyk
Link to download images:tyk
ArmBian -tyk(Topic uv. TabletPC007)
RetroPie for Orange Pi!
Group in Telegram. Join now!

Do you want your post to be in a hat? Write mehere

Post has been editediiputilo - 26.04.19, 13:06

Reason for editing: Added: "Support for xr819 radio module (OpenWrt)"

[t0tb0b]

zloy_masyanya
Pauk_anp,
A sense to run on the "stump" OMV ???

[old_shark]

Got this miracle .... see what to do with it. Ethernet is not working. Download tried debian and armbuian. What am I doing wrong? The lights on the board are off. On Ethernete - burn constantly. Power supply 4 A. Transcend class 10 card (taken out of a working oranga and flooded with a new OS), PoE has not yet been soldered. Power supplied and comb and through OTG. Tell me what's wrong?

[Psix_anp]

old_shark
Well, try another card and bp. I have an orange on an Armbian even started from my laptop.

[zloy_masyanya]

Power supplied and combed and through OTG

I also did not start with a comb, but this is most likely due to the small current from the TTL converter. I connected the charging from Nokia by 0.7 amps through the micro usb and everything started up.
Didn't try to look at the UAR port what does it show at boot time?

[old_shark]

Do you have zero? Does the Ethernet on armbiane work right away? BP nothing to do with. checked more than once - he is "100%" working. Pulls two pieces of orange through the splitter. The map is also proven in both orange and raspberry PI2 | 3.

[old_shark]

silence in the port

[sarge909]

Greetings I received a fee yesterday, Armbian started up the first time, ethernet also works. Wifi is rather weak, maximum 18-20 Mbit / s of real speed, and the board is smart. Another seller sent a picture of the board to connect to the 13-pin connector, you can trace the tracks. USB according to it (data +, data-) 3.4 and 5.6 pins. I have not had time to check it out.

Old_shark @ 11/22/2016, 10:21

silence in the port

So, in principle, the board does not start, because ethernet is always on (on other models it’s the same). Try changing the SD card or overwriting the image.

Post has been editedPecten - 23.11.16, 21:19

Reason for editing: spoiler

[old_shark]

the question is cleared .... the card died .... when erasing it, it did not erase anything, but the old axis from orange pi pc remained ... that the most dirty pc still runs on it somehow
o.O o.O why I didn’t write anything to debag - a question ....

[zloy_masyanya]

Powered by ttl converter connected to usb3.0

[stil_rambler]

As I understand it, you can power the board through 13 pin, and not just through otg?

Post has been editedstil_rambler - 22.11.16, 14:07

Reason for editing: Not read the message: (

[zloy_masyanya]

As I understand it, you can power the board through 13 pin, and not just through otg?

My photo above is so connected.

[d_b_b]

Checked Zero android with baidu sun8iw7p1_android_dolphin-p2_uart0 (googl gives only p1).
TV connected via AV, powered via micro USB. Additional devices through the hub.
Initially, android Chinese. After selecting Russian, many settings remained Chinese.
Android selected only for verification. Everything works, even BT whistles

[shatz07]

I also picked it up yesterday: my native Debian server (debian_server_dolphin-p2) is still very dull and has some kind of jambs in the power saving settings: the percent is constantly heated to 60 degrees, the transistor on the reverse side is even hotter.
Put armbian: no heating, wifi works, Wiring compiles and works (checked on IO-ports). Cool : D

Post has been editedshatz07 - 22.11.16, 18:33

[utya1988]

Comrades say ithttps: //community.open...e-free-rpi-image/13379take off?

[old_shark]

sealed resistors for PoE .... again ambush. He, as I understand it, should PoE have 802.3af? From the Cisco switch did not start. Has anyone tried PoE?

[quick31]

Old_shark @ 11/23/2016, 06:14

sealed resistors for PoE .... again ambush. He, as I understand it, should PoE have 802.3af? From the Cisco switch did not start. Has anyone tried PoE?

802.3af wiki

Connection definition
The connection detection step is used to determine whether a device connected at the opposite end of the cable is powered (PD). At this stage, the power supply device (PSE) supplies a voltage of 2.8 to 10 V to the cable and determines the parameters of the input resistance of the connected device. For a powered device, this resistance ranges from 19 to 26.5 kО© with a parallel-connected capacitor with a capacity from 0 to 150 nF [7]. Only after checking the compliance of the input resistance parameters for the powered device, the powering device proceeds to the next stage, otherwise the powering device re-tries to determine the connection after a period of at least 2 ms.

The clever piece of iron simply does not see it, it is protection against the fool. The board is passive, it will not work without a file, see the photo in which I selected the partsscheme.

Post has been editedquick31 - 23.11.16, 08:37

[old_shark]

Strange is ... if this is the standard 802.3af everyone should understand this. Ie you consider it to feed only through the injector?

[sergodk]

No experience with single board PCs yet. I ordered the subject, I expect, I understand. There was a question: what is the difference between USB and USB OTG in the subject? Does USB mean master, and USB OTG, depending on the cable, master / slave? ..

[old_shark]

https://ru.wikipedia.org/wiki/USBthere are all the answers

[sergodk]

Old_shark @ 11/23/2016, 2:57 PM

https://ru.wikipedia.org/wiki/USBthere are all the answers

OK, it seems. Then the nuance is of interest. Will the device connected to USB OTG (which is brought to MicroUSB) receive power from the board, if it is powered via pins on the connectors, and not via MicroUSB?