256 pagesV  < 1 2 3 4 5 6 > »  
 
REPLY
> Asus RT-AC87U - Discussion | [wifirouter] Dual-band Wireless-AC2400 Gigabit Router
-
What kind of firmware are you using?
Stock [ 112 ] ** [36,36%]
Asuswrt-merlin [ 124 ] ** [40,26%]
Asuswrt-hgg [ 68 ] ** [22,08%]
DD-WRT [ 4 ] ** [1,3%]
Total votes: 308
 
valuxin
Message#1
03.11.16, 22:59
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 171
Check in: 14.03.09
Huawei P20 Pro CLT-L29

Reputation:-  29  +

Asus RT-AC87U Dual-band Wireless-AC2400 Gigabit Router- Discussion


Attached Image

Specifications
  • CPU # 1:Broadcom BCM4709A0 @ 1000MHz (2 cores)
  • CPU # 2:Quantenna QT3840BC @ 500MHz (2 cores)
  • RAM # 1:256 Mb
  • RAM # 2:128 Mb
  • Flash Memory # 1:128 Mb
  • Flash memory # 2:64 Kb
  • 2.4 GHz WiFi:Broadcom BCM4360 (3x3 MIMO, 802.11b / g / n)
  • 5 GHz WiFi:Quantenna QT2518B (4x4 MU-MIMO, 802.11a / n / ac)
  • 4x 1Gbit LAN, 1x USB 3.0 (front), 1x USB 2.0 (rear)

Firmware
  • Asuswrt firmware- the original official firmware from Asus, which comes with the router. Current and previous versions can be found here:https://www.asus.com/r…87U/HelpDesk_Download/

  • Custom firmware Asuswrt-Merlin- firmware from R. Merlin, based on the original, while containing bug fixes, current versions of components, performance optimization, additional functions. Current and previous versions can be found here:http://asuswrt.lostrealm.ca/download

  • Custom firmware Asuswrt-HGG- firmware from Hugo Gomes, based on Asuswrt-Merlin. It differs from the previous one in that access to NVRAM is unlocked, some components are added, the maximum power of the wireless transmitter is increased, all wireless channels are unlocked, and the functionality is increased. The latest version of the firmware can be obtained by writing to him by e-mail (in English / Spanish):[email protected]. The guy is kind and helpful. Bug reports are welcome.
    P.S.Due to the fact that Hugo was kidnapped by aliens, it is impossible to rely on him to get the firmware. Latest versions available for download.here. The old version of Quantenna firmware is used in OLDQTN firmware - it is for those who have problems with fresh firmware.

  • DD-WRT firmware- is a 100% alternative firmware (NOTbased on the original). It has its pros and cons compared to the original. Recommended for installation only with the full knowledge of why you really need it. Current and previous versions can be found here:ftp://ftp.dd-wrt.com/betas/

    !!!Custom firmware is strongly recommended to flash usingAsus Firmware Restoration Utility. If you were stitching through the web interface, it is strongly recommended to do a reset. You will have to re-enter the settings manually - the configuration files cannot be used, since This may lead to bugs and instability of the firmware.

How to use Asus Firmware Restoration Utility
  1. First we need to download and install it. Find it here:https://www.asus.com/r…87U/HelpDesk_Download/
  2. After installation, go to the properties of the network card and manually enter the addresses:IP address 192.168.1.10, Subnet mask 255.255.255.0, main gate 192.168.1.1
  3. Turn off the router button
  4. Insert the network cable into the LAN port 2, 3 or 4
  5. Hold the reset button (next to the power button) for 10 seconds
  6. Holding the button down, turn on the router
  7. When the power indicator flashes slowly - the reset button can be released
  8. Open our utility, select the firmware file and flash


All about overclocking
You can overclock the router in two ways:CFE bootloader editingorthrough parameter changes in NVRAM.

First wayUniversal and suitable for any firmware - the main disadvantage of this method is that if you use redundant or incorrect settings to restore the router to a working state, you will have to use a programmer or UART. This principle during overclocking uses the programac87utility- with its help, overclocking is much easier and safer for new users in this business.

Second waywill workNOTon all firmware. Apply only on the following firmware: drain and merlin - version up to 378.53, gomez - all versions. The main advantage lies in the fact that all applied changes can be easily reset with the Reset button. Yes, and fuss less. How it's done:
  • Go to the terminal
  • To get the current values, drive in the following:
    nvram get clkfreq

  • To change the current values ​​by, say, "1400,800" we drive the following command:
    nvram set clkfreq = 1400,800

  • After we have made all the desired changes in NVRAM, they need to be saved and for their entry into force you need to restart the router:
    nvram commit
    reboot


!!!When accelerating the router, carefully monitor the temperatures. And although the maximum allowable temperature of the processor is 125 degrees, it is strongly recommended not to raise it above 100 degrees.
Solutions to possible problems
Useful


Post has been editedvaluxin - 28.01.19, 10:43
Reason for editing: Modified adaptive QOS with the ability to edit categories and add your own rules
Konstantin
Message#42
13.01.17, 13:24
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3547
Check in: 05.03.15

Reputation:-  116  +

* santik1, I think it is not complete, yesterday he bought ac66u and so he saw it and earned it with zte mf910, it was not on the list of supported ones, but I passed the asus, and today I took the subject. I will tune in the evening!


--------------------
Xiaomi Mi Box Android TV,Zidoo X8, Mini m8s pro, 2.0.0.b,Minix neo u9-h, Nvidia Shield / 16/2017, Himedia q5pro, Yamaha RX-V377, Jamo 5.0, ASUS RT-AC87U, QNAP D2,Xiaomi mi6 - EU, S10E
Andreich1198
Message#43
13.01.17, 23:37
Visitor
**
[offline]

Group: Users
Messages 12
Check in: 15.04.10

Reputation:-  0  +

Hello.
Recently bought this device.
I got out this thing.

There is a laptop, network storage Sigate and external hard connected to the router, well, there are all sorts of smart TVs and smartphones. So, if the laptop is connected to 2.4 GHz, then the whole grid is visible, I can go to the network drives. It only needs to switch to 5 GHz, immediately the sigate storage and the router itself disappear from the network environment. Accordingly, I cannot access network drives. I broke my head until I found out from what the disks fall off. Now to understand what to do.

Firmware stock the latest version.
Konstantin
Message#44
14.01.17, 12:46
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3547
Check in: 05.03.15

Reputation:-  116  +

Guys, can anyone be able to tell on the settings of the subject, the problem is below ...

The speed is 60-80 mb, the router, asus 87 in ATV video box, and in ottclab, the ether hangs, and Max was crazy now, so I didn’t break the telly ... I already tried everything, the telly was connected to 5 Hz ...
At the same time, and in ottplayer, which is installed directly on the TV set, the hd channels also freeze up, infuriates straight.

Android prefix mybox 3, which is with the Russian, but it's not about her, because the TV with Smart TV also has channels that hang!

Maybe the provider does what it does so that its ip tv is connected, the provider is not one of the market leaders, it works exclusively in villages, but it pulls the optics into the houses!


Firmware runoff, I have not updated it yet.
Posted by Hugo, waiting ...

I sent Hugo, but here I am ...
Guys, poke your nose at the instructions for lamers!?;)

Post has been editedKonstantin - 14.01.17, 16:09
Reason for editing: Add


--------------------
Xiaomi Mi Box Android TV,Zidoo X8, Mini m8s pro, 2.0.0.b,Minix neo u9-h, Nvidia Shield / 16/2017, Himedia q5pro, Yamaha RX-V377, Jamo 5.0, ASUS RT-AC87U, QNAP D2,Xiaomi mi6 - EU, S10E
Doctor net
Message#45
15.01.17, 16:16
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 133
Check in: 08.12.09
Asus p527

Reputation:-  1  +

Is it possible to put it here?
angelokkol
Message#46
15.01.17, 21:01
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 167
Check in: 11.11.12
LG Optimus L7

Reputation:-  2  +

Nobody tried to install an ad blocker on it.
yuran72
Message#47
15.01.17, 21:13
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 7067
Check in: 02.08.12
Lenovo C2

Reputation:-  439  +

* Constantinecable plug and hang will cease.
What instruction is needed? By flashing? Through the recovery utility reflash.

Post has been editedyuran72 - 15.01.17, 21:14


--------------------
ASUS RT-N18U
Konstantin
Message#48
16.01.17, 07:26
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3547
Check in: 05.03.15

Reputation:-  116  +

Constantin, cable plug and hang will cease.
No, connected, to no avail ...
This provider does the brains, I tried using a mobile modem, so it blows so ... Not a single plug ...


--------------------
Xiaomi Mi Box Android TV,Zidoo X8, Mini m8s pro, 2.0.0.b,Minix neo u9-h, Nvidia Shield / 16/2017, Himedia q5pro, Yamaha RX-V377, Jamo 5.0, ASUS RT-AC87U, QNAP D2,Xiaomi mi6 - EU, S10E
Coloris
Message#49
16.01.17, 08:59
a guest
*
[offline]

Group: Banned
Messages 4
Check in: 19.11.08
HTC Desire 626G Dual Sim

Reputation:-  0  +

Help out guys
Yesterday I bought RT-AC87U
Set up, everything went except 5ghz network
2.4 works fine without problems, the computer connected via the patch cord to the Internet comes out
From the box was firmware 3.0.0.4.380.3459 updated to up to 3.0.0.4.380.4180
I tried to install Asuswrt-Merlin RT-AC87U_380.64_2 from 2017-01-08 everything is useless, after switching to custom, I reset the settings
Indicators that Wi-Fi is working are both lit
After Wi-Fi is turned off, only 5ghz is turned on from the button on the front panel, 2.4 remains off
Someone tell me what to do with it.
Konstantin
Message#50
16.01.17, 12:57
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3547
Check in: 05.03.15

Reputation:-  116  +

* Coloris, re-read your post!;)
Auto daw snemi under 5Hz, put the channel 44, or 36th. Then write hugo, become its firmware, and display channel 157.
You know, I read it here!;) In the subject straight ....


--------------------
Xiaomi Mi Box Android TV,Zidoo X8, Mini m8s pro, 2.0.0.b,Minix neo u9-h, Nvidia Shield / 16/2017, Himedia q5pro, Yamaha RX-V377, Jamo 5.0, ASUS RT-AC87U, QNAP D2,Xiaomi mi6 - EU, S10E
Coloris
Message#51
16.01.17, 12:59
a guest
*
[offline]

Group: Banned
Messages 4
Check in: 19.11.08
HTC Desire 626G Dual Sim

Reputation:-  0  +

I set channel 36, only zero
I will try 44 in the evening, as I will try to accomplish it
Konstantin
Message#52
16.01.17, 13:00
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3547
Check in: 05.03.15

Reputation:-  116  +

* Coloris, daw auto remove, ok!;)


--------------------
Xiaomi Mi Box Android TV,Zidoo X8, Mini m8s pro, 2.0.0.b,Minix neo u9-h, Nvidia Shield / 16/2017, Himedia q5pro, Yamaha RX-V377, Jamo 5.0, ASUS RT-AC87U, QNAP D2,Xiaomi mi6 - EU, S10E
Coloris
Message#53
17.01.17, 08:00
a guest
*
[offline]

Group: Banned
Messages 4
Check in: 19.11.08
HTC Desire 626G Dual Sim

Reputation:-  0  +

I patched it yesterday with hugo firmware
I tried everything I can, so 5 ghz and did not go
flashed into stock, returned to store, bought RT-AC68U, everything works, everything is fine
Konstantin
Message#54
17.01.17, 13:14
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3547
Check in: 05.03.15

Reputation:-  116  +

* Coloris, apparently a marriage .., by the way, Hugo has a mesafer also under 68 asus firmware ...

Post has been editedKonstantin - 17.01.17, 13:16
Reason for editing: Add


--------------------
Xiaomi Mi Box Android TV,Zidoo X8, Mini m8s pro, 2.0.0.b,Minix neo u9-h, Nvidia Shield / 16/2017, Himedia q5pro, Yamaha RX-V377, Jamo 5.0, ASUS RT-AC87U, QNAP D2,Xiaomi mi6 - EU, S10E
Yohan77785
Message#55
18.01.17, 08:13
Visitor
**
[offline]

Group: Active users
Messages 21
Check in: 31.10.08

Reputation:-  0  +

I wanted to roll the firmware from Hugo, the router turned into recovery mode, but ASUS Firmawe Rest Util does not find it, the latest stock version of the firmware is worth it. Tell me what could be the problem?
yuran72
Message#56
18.01.17, 08:22
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 7067
Check in: 02.08.12
Lenovo C2

Reputation:-  439  +

* Yohan77785,I registered the IP address on the network card? How do you transfer to recovery mode? What LAN port are you installing through?

Post has been editedyuran72 - 18.01.17, 08:33


--------------------
ASUS RT-N18U
Yohan77785
Message#57
18.01.17, 08:47
Visitor
**
[offline]

Group: Active users
Messages 21
Check in: 31.10.08

Reputation:-  0  +

I registered a static address, tried it through port 2 and 3, entered recovery mode as in the instructions in the header: power off, reset button 10 seconds. power on, power light blinks slowly. The most interesting thing is that the PC pings the PC but for some reason it doesn’t see it, can there be a problem with the stock firmware? Hugo wrote something about this in a letter that it would be difficult to lower and install custom (In English is not strong):
"Latest FW version is 380.64, released on 13 JAN 17. (link to full repository bellow)

If you’re installing it, it’s not a problem. FW version is the code will be reverted. "

Posted on 1/18/2017 08:50:

Although in general and in the drain it works fine, but there is a lack of functionality, namely when connecting to a VPN, is it possible to leave the default gateway to the provider’s connection and not wrap all traffic in the tunnel? In the tunnel it is necessary to send only for example 10.0.0.0/8 subnet? I thought maybe in the firmware from Hugo there is such an opportunity
RAH-66
Message#58
18.01.17, 09:18
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1601
Check in: 15.06.14
Microsoft Lumia 532 DS

Reputation:-  95  +

Yohan77785 @ 01/18/17, 11:47*
Hugo wrote something about this in a letter that it would be difficult to lower and install custom

He wrote that if you have the latest Asus or Merlin, then you need to roll back to an older version to install its firmware.
Yohan77785
Message#59
18.01.17, 09:28
Visitor
**
[offline]

Group: Active users
Messages 21
Check in: 31.10.08

Reputation:-  0  +

It is impossible to lower the firmware, downloaded the previous version, in recovery mode the router from the web interface does not see that the firmware does not fit.
yuran72
Message#60
18.01.17, 09:46
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 7067
Check in: 02.08.12
Lenovo C2

Reputation:-  439  +

* Yohan77785,lower the firmware version, also through the recovery mode.

Post has been editedyuran72 - 18.01.17, 09:47


--------------------
ASUS RT-N18U
Yohan77785
Message#61
20.01.17, 09:58
Visitor
**
[offline]

Group: Active users
Messages 21
Check in: 31.10.08

Reputation:-  0  +

I could only flash from a virtual machine, under the 7th, from the 10th, ASUS Firmawe Rest Util does not see the router.
Asus
 

256 pagesV  < 1 2 3 4 5 6 > » 


 mobile version    Now: 04/28/19 16:32