R-BOX RK3229 [Android] | [TV Box] [Rockchip RK3229]



Rep: (2958)
DiscussionR-BOX Android 5.1.1 Rockchip RK3229 LED Display "Clock"
PictureTv box
Discussion пїЅ



Specifications
R-BOX Android 5.1.1 RK3229 2G / 8G
Silver or black
Android 5.1.1
RK3229, quad core Cortex-A7 Up to 1.5GHz
2GB DDRIII, 8GB EMMC
TF CARD Support 1 ~ 32GB
802.11 b / g / n, RTL8723, 10/100 BaseT, Bluetooth 4.0
HDD File System FAT16 / FAT32 / NTFS
Support Widevine Level 1, DRM PlayReady, Verimatrix, built in Trustzone,
HDCP 2.2 / 1.4, Support 4K 10-bit H.265 / H.264 / VP9 video playback and display
1 * HDMI 1.4b with CEC, 1 * Micro SD Card (TF), 3 * USB HOST 2High speed USB 2.0, support USB DISK and USB HDD
1 * SPDIF, 1 * RJ45, 1 * Digital display tube; Digital display tube
1 * Power input, Power 5V / 2A
In Russian :
R-BOX specifications:
SoC processor - Rockchip RK3229 quad core ARM Cortex A7 @ 1.5 GHz with ARM Mali-400MP2
RAM - 2GB DDR3
Storage devices - 8GB eMMC flash + micro SD slot
Video output - HDMI 2.0 to 4K2K @ 60 fps, and AV output (composite + stereo)
HDMI, AV, and optical S / PDIF (TBC) audio output
Network - Gigabit Ethernet, 802.11 b / g / n WiFi and Bluetooth 4.0
USB - 3x USB 2.0 host port compatible with OTG
Miscellaneous - IR receiver, Built-in microphone, power button, reset settings, LCD screen on the front panel
Power supply - 5V / 2A

A photo
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image


Firmware
http: //www.filefactory...RK3229%202G8G%20fw.rar

Or on the sales site there are firmware
(Firmware Update 20160701)
http: //www.geekbuying...h-CEC-DLNA-368030.html
TWRP. TeamWin Recovery Project

How to set up a remote control box for one and the TV
Utility, Remote control boxing, problem solving, etc.
We solve the problem of lack of memory. For gamers.


There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonPictureunder the messages to which you want to add links.

Post has been editedVasily_5 - 15.12.16, 17:02



Rep: (565)
Fuuturo @ 05/04/17, 11:12*
switched to a separate block - there are less reboots
The right decision. In all branches of the forum on consoles, they recommend it.
For the USB ports of the TV set are 0.5-1A, and it is advisable to choose a power supply of 2-4A



Rep: (2958)
* fuuturo , The latest firmware arrived in OTA. I lifted my hat. Yes, there was such a bug, the box rebooted from time to time, but now it seems to have been fixed with the latest update. Maybe after you upgrade with this update.
You need to transfer Box wi-fi and check the update again, since all updates arrive via wi-fi.



Rep: (59)
Despite all the firmware and flashing, changing the power supply, updating by air, the box still reboots, and this manifests itself spontaneously: it can work for half an hour - and after that reboot, then a minute after loading. In short, boxing does not work.



Rep: (2958)
* fuuturo , Good day. Hello.
Yes, somehow you are not lucky with this boxing.
Maybe the box restarts due to overheating, you tried to install a program to check the temperature.



Rep: (59)
* Vasily_5,
Well, yes, I didn’t set a program, but measured with a device - the temperature of the chip is 70-80 degrees. hot?



Rep: (2958)
* fuuturo Probably you have to open and see how the cooling is going.
You may even have to collective farm.
Or cling to a fan Well, I do not advise you to change the radiator.
Since so many people tear off together with the processor or damage and get a brick.



Rep: (41)
The console switched to AV mode. No, I can’t switch to hdmi. Tell me how to switch.



Rep: (1010)
M
The topic is closed. Due to lack of interest


Full version    

Help     rules

Now: 08/21/19, 02:57