Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
Motorola Moto Z Play / Droid - Firmware |
Message#1 23.10.16, 19:01 | |
MotoNaut [offline] Group: Friendssavagemessiahzine.com Messages 2526 Check in: 05.12.12 Essential Phone Reputation: 806 | Motorola Moto Z Play / Droid - Firmware XT1635-01 / 02/03, Addison Description | Modification and decorations � | Discussion � | Purchase � | Power consumption and autonomy � | Firmware � | AOSP firmware � Important information! DOWNGRADE from 8.0 soak test to 7.1.1 - positive only with the help of TWRP (or, in theory, through fastboot - sew only boot and system). If you sew via RSD or via fastboot with a modem, you will lose IMEI. Drivers and Utilities Latest drivers from Motorola website (compatible with Windows 10) Motorola Device Manager: MotorolaDeviceManager_2.5.4 (Windows) MDM Installer_2.2.9 (Mac) RSD Lite 6.2.4 Verizon Wireless Software Upgrade Assistant: VerizonWirelessSoftwareUpgradeAssistantForMotorola_1.4.8 (Windows) VerizonWirelessSoftwareUpgradeAssistant_for_Motorola_1.4.8 (Mac) Official firmware
Unofficial firmware Z Play Oreo Pure Edition Stock based firmware
�������� �� ���� LOS / AOSP. ���� ���� �� ��� �� �������� download
Instructions Rollback with Android 8.0 to 7.1.1 A set of instructions from Noigel (root, recovery, etc.) A brief instruction on the firmware XT1635-03 ("Chinese") Unlocking / locking the bootloader Unlocking / locking the bootloader (bootloader) on Moto Z (International, non USA Droid) Attention: Unlocking the bootloader will result in a factory reset and will delete all your personal data (photos, messages, settings, etc.) from the device! Software Required: -Motorola Device Managerormotorola drivers -Minimal ADB & Fastboot Instruction: 1. Ensure that Device Manager or the Motorola driver is installed on the computer. Also, you need the latest version of ADB & Fastboot; 2. In the phone itself, you need to activate the menu item "For Developers". To do this, go to Settings - About phone and click 8 times on the item "Build number". After that, the item "For Developers" should appear in the settings. Now you need to go there and activate two parameters - "Factory Unlock" and "USB Debugging"; 3. Turn off the phone, and then enter it into fastboot mode. To do this, hold down the power and volume down keys; 4. Connect the phone to the computer phone. Make sure that it is determined and the necessary drivers are installed (the phone should be displayed in the device list called Motorola ADB Interface); 5. Run as administrator Minimal ADB and Fastboot via a shortcut or via the command line (run the command line and go to the folder where the adb.exe file is located, for example "cd C: \ Program Files \ ADB"); 6. Enter "fastboot oem get_unlock_data" in the command line. After entering the command, several lines should appear that begin with "(bootloader)". It is necessary to copy all these lines without the text "(bootloader)" (press the right mouse button - Mark - Select the text - Once again the right mouse button to copy) Do not close the window with the command line, also leave the phone connected to the computer; 7. For further action, you need a Google account or an account on the Motorola website with a valid e-mail address. It is necessary to follow the link to the site. Next, go down to paragraph 6 and paste in the copied code (sample code: 0A40040192024205 # 4C4D355631323030373731363031303332323239 # BD008A672BA4746C2CE02328A2AC0C39F951A3E5 # 1F532800020000000000000000000000), remove the spaces in the code as necessary; 8. Click on "Can my device be unlocked?". There should be no errors during this test. If everything is entered correctly, go down even lower, select "I Agree" and press "REQUEST UNLOCK KEY"; 9. If all actions are performed correctly, an email with an unlock code of 20 characters should be sent to the mail. It needs to be copied and returned to the command line; 10. Next, enter the command "fastboot oem unlock UNLOCK CODE", where UNLOCK_ CODE is the code that came to the mail. After entering the command, the message “Bootloader Unlocked” should appear on the phone screen. Downloader unlocked! Video instructions for unlocking the bootloader After unlocking the bootloader, when you turn on the phone there will be a warning about the unlocked bootloader. You can remove the warning using this instruction. Bootloader lock (OEM_lock) Batnik for flashing of. firmware Version of the Chinese firmware on the European firmware via fastboot Partial change of locale (in Russian, Belarusian, Ukrainian, or whatever you want) for Verizon devices (Moto Z Play Droid) Anbrik (raising the "brick") Installing OTA updates in a separate file Instructions for updating Moto Z Play reteu channel to Android 7.0 Enabling dualsim mode on single-value models Firmware with custom recovery TWRP (only for unlocked bootloader) Install TWRP from the appropriate section of the header. Next, make a clean, regular firmware or update the same firmware. "Clean" firmware : - download firmware in * .zip format - for firmware via custom recovery. - load the phone in TWRP, make backup firmware, which is installed; - connect the phone in TWRP mode to the PC, copy the firmware backup and the files you need to the PC (skip if you have a memory card and the necessary files on it) - make a wipe of everything (and internal memory too), - wipe in the advanced menu. Disconnect the phone from the PC - make a reboot to recovery (reboot to recovery), connect the phone to the PC - upload the firmware file to the phone memory (if desired and necessary: zip file xposed, GAPPS, zip file SuperSu) - in the install menu in TWRP, select the firmware file, if you wish, add the xposed, GAPPS, SuperSu zip file to the firmware queue. - svaypnut for firmware - wait for download, enjoy. Normal firmware - load the phone in TWRP, make backup firmware, which is installed; - make wipe data / dalvik (art) cache / cache - the usual wipe, which by default offers TWRP. - make a reboot to recovery (reboot to recovery), connect the phone to the PC - upload the firmware file to the phone memory (if desired and necessary: zip file xposed, GAPPS, zip file SuperSu) - in the install menu in TWRP, select the firmware file, if you wish, add the xposed, GAPPS, SuperSu zip file to the firmware queue. - svaypnut for firmware - wait for download, enjoy. Update mode - load the phone in TWRP, make backup firmware, which is installed; - connect the phone in TWRP mode to the PC, copy the firmware backup and the files you need to the PC (skip if you have a memory card and the necessary files on it) - make wipe cache / dalvik (art) cache, - wipe in the advanced menu. Disconnect the phone from the PC - upload the firmware file to the phone memory (if desired and necessary: zip file xposed, GAPPS, zip file SuperSu) - in the install menu in TWRP, select the firmware file, if you wish, add the xposed, GAPPS, SuperSu zip file to the firmware queue. - svaypnut for firmware - repeat wipe cache / dalvik (art) cache - wait for download, enjoy. Motorola Moto Z Play / Droid - Official firmware (Glebvz Post # 63110228)Firmware with RSD lite Custom Recovery and Kernels Twrp-3.2.3-0-addison.img Installing TWRP Custom Recovery XDA thread 1. Download the latest version of TWRP from here. 2. Download this archiveAddison_TWRP.rar(736.38 KB) 3. Unzip the downloaded TWRP file to the Addison_TWRP folder, rename it to twrp.img 4. Start Flash-TWRP.bat batch file from the folder, make your choice, follow the instructions. 5. After downloading TWRP do reboot recovery Kernel miscellanea There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the sectionI want to be curator(after having studied the topic header and all materials for curators). Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links. Post has been editedVlad J.S. - 23.10.18, 21:14 Reason for editing: navigator |
Message#42 03.01.17, 07:05 | |
Novice [offline] Group: Active users Messages 33 Check in: 06.08.16 Motorola Moto Z Play Reputation: 0 | Anyone here cannot guess what and who will receive the update before, even within the same region one smart received an update, and the other is not completely identical. Who wrote that the updates are on the numerical value Having within the same region, well, so that the server does not load when downloading. The European is faster than the Chinese is updated, already 2 updates arrived, there is not a single Chinese (both have a full stock without modifications) Post has been editedHapKoHTpuK - 03.01.17, 07:06 |
Message#43 03.01.17, 19:15 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 10657 Check in: 07.04.11 Motorola Moto Z Play Reputation: 7704 | I use it from the very beginning (of course, at first I rewrote both batch files under our body a little), it is quite convenient, all the firmware takes 3-5 minutes Download archive Flash_ZPlay.rar(596.67 KB) unpack to the root of the disk, throw in the resulting folderFlash_ZPlayPre-unzipped firmware files, connect the body in fastboot mode (hold down the Volume Down + Power buttons), run a batch file with Admin rights to choose: NoWipe.bat - it sews without the data section wipe, i.e. with data storage (not recommended for bootlops) Wipe.bat - sews with full wipe about the installation of firewood, we read the cap, a sign of the correct connection in fastboot mode is the flashing of the indicator to the right of the speaker Attention!!! Before use, you need to check the number of system.img_sparsechunk in the firmware (you can open it with any archiver) and in the batch file (you can open it with a text editor such as Notepad +++), if necessary add the missing Post has been editedivan-68 - 18.05.18, 15:38 Reason for editing: raised in the topic header -------------------- |
Message#44 03.01.17, 19:18 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1041 Check in: 17.03.14 HTC U11 Plus 6/128 Reputation: 34 | Before Motorola, I had Lenovo p1, and so one person assembled the firmware on the basis of the official one with a breakdown. download And tvrp, like you first flash the firmware itself and then unlock it. loader and tvrp)) everything so to say it in one file was very convenient). Here I think if there are such specialists here that would also be done, I think many will approve. Or Motorola can not do so ???? Post has been editedpervak85 - 03.01.17, 19:20 |
Message#45 04.01.17, 00:05 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 135 Check in: 07.01.09 Motorola Moto Z Play Reputation: 8 | After unlocking the bootloader, when you turn on the phone there will be a warning about the unlocked bootloader. You can remove the warning with the help of this instruction. I made this instruction, now when turned on at the place where the inscription appeared, now the black screen and the letters N / A also wait 5 seconds and then load. so it should be? |
Message#46 04.01.17, 06:02 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 10657 Check in: 07.04.11 Motorola Moto Z Play Reputation: 7704 | Collection of boot logos for 1080x1920 screens replaces the logo that appears after unlocking the bootloader white letters N / A on a dark background will be visible in any case, they are not visible on white under each spoiler a picture and archive with a filelogo.binwhich (file, not archive) must be flashed through the fastboot command fastboot flash logo logo.bin Logo collection 000 111 222 333 444 555 666 777 888 999 100 110 120 Post has been editedivan-68 - 05.01.17, 23:24 -------------------- |
Message#47 04.01.17, 21:40 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 101 Check in: 23.05.11 Reputation: 15 | |
Message#48 04.01.17, 23:06 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 135 Check in: 07.01.09 Motorola Moto Z Play Reputation: 8 | They wrote that in India updates came, but not to Nugu. There’s been a lot of effort to keep track of the Moto Z Play. has build number MPN24.104-56.) Maybe after these updates and android 7 will be, as it was with the 1st Moto H. We are waiting :) Thank! But N / A still remained, but at least it’s not annoying anymore :) The quality of the photo is of course awful, but I think you will understand what I’m talking about. Post has been editedchertic313 - 04.01.17, 23:06 |
Message#49 05.01.17, 19:54 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 463 Check in: 02.01.13 Samsung Galaxy A30 SM-A305FD Reputation: 33 | People, tell me, on rst devices, what firmware is it and what update channel in the settings? I have on Pindos (bought in the USA) XT1635-02 retus channel and no updates are yet visible, build number mpn24.104-49 And yet, if you unlock the bootloader, will applications from banks work, for example, Sat online? |
Message#50 05.01.17, 20:38 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 229 Check in: 01.07.09 Motorola Moto Z Play Reputation: 16 | People, tell me, on rst devices, what firmware is it and what update channel in the settings? I have on Pindos (bought in the USA) XT1635-02 retus channel and no updates are yet visible, build number mpn24.104-49 And yet, if you unlock the bootloader, will applications from banks work, for example, Sat online? reteu MPNS24.104-44-7 Your applications will work) -------------------- Moto Z (XT1650-03) \\ Oreo 8.0.0 OPL27.76-51-7 Moto Z Play (XT1635-02) \\ Oreo 8.0.0 OPN27.76-12-22-9 |
Message#51 05.01.17, 23:27 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 10657 Check in: 07.04.11 Motorola Moto Z Play Reputation: 7704 | Unfortunately, you can’t do anything about it, on a dark background they will still be visible added a couple more pieces:Motorola Moto Z Play / Droid - Official firmware (Post ivan-68 # 56773093) -------------------- |
Message#52 24.01.17, 08:37 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 52 Check in: 10.05.12 Motorola Moto Z Play Reputation: 2 | Hello! There are two questions. 1. Has anyone put xposed on this device? 2. I want to re-enable locking the loader. After unlocking changed logo.bin. The question is where to get the stock logo.bin? Post has been editedalur29 - 24.01.17, 08:45 |
Message#53 24.01.17, 09:18 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3150 Check in: 27.01.11 Motorola Moto Z2 Play (2017) 4/64 Reputation: 329 | alur29, And what will the rek? The status of the loader will still be changed and the service center or experienced user will instantly see that the loader has been unlocked. In addition, the unlock does not bother anyone and does not ask for food. You can use it (set custom, third-party recoveries, xposed, etc.), and you can forget and use a clean drain and get updates. Stock logo must be in the firmware. You can download and copy it from there - the logo.bin file is immediately in the root of the archive. Post has been editedol_if_ua - 24.01.17, 09:21 |
Message#54 24.01.17, 21:13 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3150 Check in: 27.01.11 Motorola Moto Z2 Play (2017) 4/64 Reputation: 329 | So, and the firmware of the native logo does not cancel the time of "idle" boot. That the notification of the unlocked loader, that the third-party logo, that the native logo will hang the same time. If you are afraid of bricks, then you make a firmware backup via TvRP to an external card and in case of an unsuccessful experience with an exposure, you make wipe systems, dates and cache in TvRP, and then restore it from the backup. Post has been editedol_if_ua - 24.01.17, 21:16 |
Message#55 25.01.17, 09:09 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 52 Check in: 10.05.12 Motorola Moto Z Play Reputation: 2 | |
Message#56 25.01.17, 09:30 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3150 Check in: 27.01.11 Motorola Moto Z2 Play (2017) 4/64 Reputation: 329 | alur29, with wipes, this is called "clean" firmware - wipe everything except external memory where the backup is. If you are lazy, install without a wipe, but glitches of the system with a high probability will be transferred to the new firmware. And if there was a bootlup, then without wipes, a new firmware can and will not start. |
Message#57 25.01.17, 11:35 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 52 Check in: 10.05.12 Motorola Moto Z Play Reputation: 2 | |
Message#58 25.01.17, 11:42 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3150 Check in: 27.01.11 Motorola Moto Z2 Play (2017) 4/64 Reputation: 329 | alur29, It is strange that the card does not see twrp. It is worth looking through the branches of this phone solution. Wipe the internal memory will erase the backup. But you can make a backup right in twrp by connecting to a computer, transfer it to a computer, make a wipe and immediately return it back. Post has been editedol_if_ua - 25.01.17, 11:49 |
Message#59 25.01.17, 11:54 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 10657 Check in: 07.04.11 Motorola Moto Z Play Reputation: 7704 | None of the tested twrp sees a memory card. If you make a copy in the phone's memory, the wipe will erase it yes, for us there is no normal recovery yet about wipe and backup saving - backup in new recovery (including ours) is saved by default in the data / media / 0 / section, and so when wipe from under recovery (so-called factory reset, also known as Data wipe, It is an analogue of the reset to the factory settings), which is usually done when flashing custom or restoring backup this sectiondoes not overwrite. But when flashing through a computer with a full wipe, this section will get to love (an analog of the Internal Storage wipe from under the recovery). Post has been editedivan-68 - 25.01.17, 11:55 -------------------- |
Message#60 25.01.17, 12:44 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3150 Check in: 27.01.11 Motorola Moto Z2 Play (2017) 4/64 Reputation: 329 | ivan-68, This is what an experienced motor scooter wrote about getting root on moto X Play. There, only some files that were carefully transferred from hand to hand as an Olympic flame were suitable for the root. Perhaps for Moto Z Play the same story fits. And yes, earlier Tvrp itself put the root, but on XPlay this option does not roll, and even higher wrote that Tvrp for moto z play is still clumsy. So, installing a root through TvRP in your post is probably a miracle), but if it works, it should be used. Post has been editedol_if_ua - 25.01.17, 12:45 |
Message#61 25.01.17, 14:32 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3150 Check in: 27.01.11 Motorola Moto Z2 Play (2017) 4/64 Reputation: 329 | |
mobile version | Now: 05/20/19 00:22 |