> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


162 pagesV  « < 158 159 160 161 162 > »  
 
REPLY
> Motorola Moto Z Play / Droid - Firmware
Noigel
Message#1
23.10.16, 19:01
MotoNaut
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2526
Check in: 05.12.12
Essential Phone

Reputation:-  806  +

Motorola Moto Z Play / Droid - Firmware
PictureXT1635-01 / 02/03, Addison
Description | Modification and decorations | Discussion | Purchase | Power consumption and autonomy | Firmware | AOSP firmware

Important information!
DOWNGRADE from 8.0 soak test to 7.1.1 - positive only with the help of TWRP (or, in theory, through fastboot - sew only boot and system). If you sew via RSD or via fastboot with a modem, you will lose IMEI.

Drivers and Utilities

Official firmware

Unofficial firmware

Instructions
Rollback with Android 8.0 to 7.1.1
A set of instructions from Noigel (root, recovery, etc.)
A brief instruction on the firmware XT1635-03 ("Chinese")
Unlocking / locking the bootloader
Unlocking / locking the bootloader (bootloader) on Moto Z (International, non USA Droid)

Attention: Unlocking the bootloader will result in a factory reset and will delete all your personal data (photos, messages, settings, etc.) from the device!
Software Required:
-Motorola Device Managerormotorola drivers
-Minimal ADB & Fastboot

Instruction:
1. Ensure that Device Manager or the Motorola driver is installed on the computer. Also, you need the latest version of ADB & Fastboot;
2. In the phone itself, you need to activate the menu item "For Developers". To do this, go to Settings - About phone and click 8 times on the item "Build number". After that, the item "For Developers" should appear in the settings. Now you need to go there and activate two parameters - "Factory Unlock" and "USB Debugging";
3. Turn off the phone, and then enter it into fastboot mode. To do this, hold down the power and volume down keys;
4. Connect the phone to the computer phone. Make sure that it is determined and the necessary drivers are installed (the phone should be displayed in the device list called Motorola ADB Interface);
5. Run as administrator Minimal ADB and Fastboot via a shortcut or via the command line (run the command line and go to the folder where the adb.exe file is located, for example "cd C: \ Program Files \ ADB");
6. Enter "fastboot oem get_unlock_data" in the command line. After entering the command, several lines should appear that begin with "(bootloader)". It is necessary to copy all these lines without the text "(bootloader)" (press the right mouse button - Mark - Select the text - Once again the right mouse button to copy) Do not close the window with the command line, also leave the phone connected to the computer;
7. For further action, you need a Google account or an account on the Motorola website with a valid e-mail address. It is necessary to follow the link to the site. Next, go down to paragraph 6 and paste in the copied code (sample code: 0A40040192024205 # 4C4D355631323030373731363031303332323239 # BD008A672BA4746C2CE02328A2AC0C39F951A3E5 # 1F532800020000000000000000000000), remove the spaces in the code as necessary;
8. Click on "Can my device be unlocked?". There should be no errors during this test. If everything is entered correctly, go down even lower, select "I Agree" and press "REQUEST UNLOCK KEY";
9. If all actions are performed correctly, an email with an unlock code of 20 characters should be sent to the mail. It needs to be copied and returned to the command line;
10. Next, enter the command "fastboot oem unlock UNLOCK CODE", where UNLOCK_ CODE is the code that came to the mail. After entering the command, the message “Bootloader Unlocked” should appear on the phone screen. Downloader unlocked!

Video instructions for unlocking the bootloader

After unlocking the bootloader, when you turn on the phone there will be a warning about the unlocked bootloader. You can remove the warning using this instruction.

Bootloader lock (OEM_lock)

Batnik for flashing of. firmware

Version of the Chinese firmware on the European firmware via fastboot
Partial change of locale (in Russian, Belarusian, Ukrainian, or whatever you want) for Verizon devices (Moto Z Play Droid)
Anbrik (raising the "brick")
Installing OTA updates in a separate file

Instructions for updating Moto Z Play reteu channel to Android 7.0

Enabling dualsim mode on single-value models

Firmware with custom recovery TWRP (only for unlocked bootloader)
Install TWRP from the appropriate section of the header. Next, make a clean, regular firmware or update the same firmware.
"Clean" firmware :
- download firmware in * .zip format - for firmware via custom recovery.
- load the phone in TWRP, make backup firmware, which is installed;
- connect the phone in TWRP mode to the PC, copy the firmware backup and the files you need to the PC (skip if you have a memory card and the necessary files on it)
- make a wipe of everything (and internal memory too), - wipe in the advanced menu. Disconnect the phone from the PC
- make a reboot to recovery (reboot to recovery), connect the phone to the PC
- upload the firmware file to the phone memory (if desired and necessary: ​​zip file xposed, GAPPS, zip file SuperSu)
- in the install menu in TWRP, select the firmware file, if you wish, add the xposed, GAPPS, SuperSu zip file to the firmware queue.
- svaypnut for firmware
- wait for download, enjoy.
Normal firmware
- load the phone in TWRP, make backup firmware, which is installed;
- make wipe data / dalvik (art) cache / cache - the usual wipe, which by default offers TWRP.
- make a reboot to recovery (reboot to recovery), connect the phone to the PC
- upload the firmware file to the phone memory (if desired and necessary: ​​zip file xposed, GAPPS, zip file SuperSu)
- in the install menu in TWRP, select the firmware file, if you wish, add the xposed, GAPPS, SuperSu zip file to the firmware queue.
- svaypnut for firmware
- wait for download, enjoy.
Update mode
- load the phone in TWRP, make backup firmware, which is installed;
- connect the phone in TWRP mode to the PC, copy the firmware backup and the files you need to the PC (skip if you have a memory card and the necessary files on it)
- make wipe cache / dalvik (art) cache, - wipe in the advanced menu. Disconnect the phone from the PC
- upload the firmware file to the phone memory (if desired and necessary: ​​zip file xposed, GAPPS, zip file SuperSu)
- in the install menu in TWRP, select the firmware file, if you wish, add the xposed, GAPPS, SuperSu zip file to the firmware queue.
- svaypnut for firmware
- repeat wipe cache / dalvik (art) cache
- wait for download, enjoy.
Clean firmware is recommended for a cardinal change of firmware - it does not leave "tails", unwanted files, etc .. Normal - when changing firmware, not drastically - another version of the mod, etc .. Update mode - for a not very named version of the same firmware

Motorola Moto Z Play / Droid - Official firmware (Glebvz Post # 63110228)Firmware with RSD lite



Custom Recovery and Kernels
Twrp-3.2.3-0-addison.img
Installing TWRP Custom Recovery
XDA thread
1. Download the latest version of TWRP from here.
2. Download this archiveAttached fileAddison_TWRP.rar(736.38 KB)

3. Unzip the downloaded TWRP file to the Addison_TWRP folder, rename it to twrp.img
4. Start Flash-TWRP.bat batch file from the folder, make your choice, follow the instructions.
5. After downloading TWRP do reboot recovery

Fashion

Kernel


miscellanea


There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the sectionI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.


Post has been editedVlad J.S. - 23.10.18, 21:14
Reason for editing: navigator
pazle123
Message#3182
09.03.19, 19:01
a guest
*
[offline]

Group: Users
Messages 9
Check in: 29.08.16

Reputation:-  0  +

* wolfixxx
installation ends on update vendor? If yes, then as I understand it, not all custom receivers work with the vendor section.
Suppose off. Trvp which my 3.3.3 doesn't see it and cannot mount it.
Attached the one I use.
But one hell, for some reason, the network falls off from time to time or the system tricks fly out with errors.
In general, if he suddenly fiercely, I immediately got him and sew in this way -
1. I format all partitions and press off. Turn off
2. then roll the image that from shamu17https: //forum.xda-deve…26-118-22-2-8-t3717037
3. I put magisk 18, it mounts the vendor section. One moment there is a boot image of boot-noverity. Sometimes I put it sometimes, I do not know if it is needed.
https: // androidfilehos ... d = 11410963190603880836
4. reboot, wipe system data cache.rebut.
5. in the mount section I check all partitions and start the firmware.

And xperence is the only prose on the 9th which I got up. In general, I noticed that the x86 requests get up very hard and rare.
http: //downloads.hosti…06-NIGHTLY-addison.zip

Attached files

Attached fileTWRPxper-addison-Unnoficial.img(13.96 MB)
AndiRe
Message#3183
14.03.19, 15:28
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 394
Check in: 30.08.09

Reputation:-  23  +

Hello!
Did someone put the Oreo 8 on the XT1635-03 (Chinese) ??
At the moment, it is 6.0.1, but I'm already used to 8 Andryusha and I want to upgrade))
By air, writes that the latest software is installed.
Attached Image


Post has been editedAndiRe - 14.03.19, 15:41
Reason for editing:.


--------------------
logotoy73
Message#3184
14.03.19, 16:58
Local
*****
[online]

Group: Friendssavagemessiahzine.com
Messages 124
Check in: 28.08.11
Motorola Moto Z Play

Reputation:-  65  +

* AndiRe, * AndiRe,
By air, it will not work to update. Only the most, handles put 8-ku.


--------------------
If the phone could talk, he would have sent me a long time ago.
steam_l
Message#3185
15.03.19, 14:55
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 432
Check in: 21.04.08
Motorola Moto Z Play

Reputation:-  19  +

AndiRe @ 03/14/19, 15:28*
Did someone put the Oreo 8 on the XT1635-03 (Chinese) ??

Many who put. No questions asked.
But the first time I came back - I wanted to try 9.0, but I changed it to 7.1 stock.
Anyway - autonomy is better.
He hoped for a very long time that the 8.0 battery would eat at least no more than 7.1, but alas.
I can use the phone again for two full days, and not a maximum of one and a half.


--------------------
MOTO XT910 ->XT1060 ->XT1093 ->XT1635 ...
HUAWEI Y6 Pro (pro..the shaft, not otherwise)
Onda v975w (win->android)
Nexus 7 2012 (CM)
kbpwrhd
Message#3186
27.03.19, 08:13
Visitor
**
[offline]

Group: Active users
Messages 23
Check in: 12.09.13
Motorola Moto Z Play

Reputation:-  0  +

steam_l @ 03/15/19 16:55*
But the first time I came back - I wanted to try 9.0, but I changed it to 7.1 stock.


And which one? retcn? is google pay working fine?
steam_l
Message#3187
27.03.19, 10:26
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 432
Check in: 21.04.08
Motorola Moto Z Play

Reputation:-  19  +

kbpwrhd @ 03/27/19 08:13*
And which one? retcn? is google pay working fine?

european
GP I do not know, I do not use yet.
Smart unlocked, reluctant to mess with magic.


--------------------
MOTO XT910 ->XT1060 ->XT1093 ->XT1635 ...
HUAWEI Y6 Pro (pro..the shaft, not otherwise)
Onda v975w (win->android)
Nexus 7 2012 (CM)
drescot
Message#3188
27.03.19, 11:23
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 419
Check in: 10.06.14
Motorola Moto Z Play

Reputation:-  20  +

kbpwrhd @ 03/27/19 8:13*
And which one? retcn? google pay works fine

I've been sitting on this for a long time, GP is working
Attached Image


Post has been editeddrescot - 27.03.19, 11:28
kbpwrhd
Message#3189
27.03.19, 15:26
Visitor
**
[offline]

Group: Active users
Messages 23
Check in: 12.09.13
Motorola Moto Z Play

Reputation:-  0  +

I've been sitting on this for a long time, GP is working


I just put the last 8.0 (XT1635-02_ADDISON_RETAIL_8.0.0_OPNS27.76-12-22-9_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip)

google pay worked, then somehow stopped paying in stores.
GP reinstallation did not help, magisk also, safetynet passes
It is advised to demolish Google services and reinstall, but even reluctance

Post has been editedkbpwrhd - 27.03.19, 15:27
Tornvald85
Message#3190
27.03.19, 15:28
Local
*****
[online]

Group: Friendssavagemessiahzine.com
Messages 377
Check in: 09.04.11
Oneplus 6T 8/128

Reputation:-  23  +

* kbpwrhd, Download magic 18.2 beta. It helped me.
drescot
Message#3191
27.03.19, 15:47
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 419
Check in: 10.06.14
Motorola Moto Z Play

Reputation:-  20  +

* kbpwrhd, This Magic is buggy, try to change the safatinet patch.
Adlan20
Message#3192
27.03.19, 21:56
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 55
Check in: 14.03.19
Motorola Moto Z Play

Reputation:-  0  +

Good day friends! Such a problem: I'm trying to install twrp on the motorcycle. The comp body sees both "adb devices" and "fastboot devices" modes. But when I drive in the command: "fastboot flash recovery twrp.img" gives different errors. That he does not recognize that that, that he does not see. Somewhere I read that at the beginning of the team it is necessary to enter this: ". \" After that, at least somehow reacts adequately to the commands. And now this appears:
download max of 534773760 bytes
sending 'recovery' (15954 KB) ...
OKAY [0.435s]
writing 'recovery' ...
(bootloader) Image not signed or corrupt
OKAY [0.306s]
finished. total time: 0.747s "WHAT IS IT?: wacko:


--------------------
I'm not a magician, I'm just learning)
Unreal_man_666
Message#3193
28.03.19, 03:04
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 585
Check in: 30.07.15

Reputation:-  17  +

Adlan20 @ 03/28/19, 4:56*
Image not signed or corrupt
broken image what? Try downloading Tvrp or download another version.
Adlan20
Message#3194
28.03.19, 06:02
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 55
Check in: 14.03.19
Motorola Moto Z Play

Reputation:-  0  +

Unreal_man_666 @ 03.28.19, 3:04*
broken image what? Try downloading Tvrp or download another version.


In the sense of another (rar) or (img)? Bootloader unlocked, of course. Should the phone be rooted for this or how? I am preschool in these matters)


--------------------
I'm not a magician, I'm just learning)
Adlan20
Message#3195
28.03.19, 06:09
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 55
Check in: 14.03.19
Motorola Moto Z Play

Reputation:-  0  +

That's what he gave out:

Attached images
Attached Image
Attached Image


--------------------
I'm not a magician, I'm just learning)
Adlan20
Message#3196
28.03.19, 06:13
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 55
Check in: 14.03.19
Motorola Moto Z Play

Reputation:-  0  +

The location of the files is:

Attached images
Attached Image
Attached Image
Attached Image


--------------------
I'm not a magician, I'm just learning)
Adlan20
Message#3197
28.03.19, 06:23
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 55
Check in: 14.03.19
Motorola Moto Z Play

Reputation:-  0  +

I tried with different terminals, and from the TvRP built into the folder, and the shift and the right mouse button caused by squeezing, and called through the window: (windows + R) with the command: cmd, one result, different errors:

Attached images
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image


--------------------
I'm not a magician, I'm just learning)
kbpwrhd
Message#3198
28.03.19, 07:34
Visitor
**
[offline]

Group: Active users
Messages 23
Check in: 12.09.13
Motorola Moto Z Play

Reputation:-  0  +

kbpwrhd, this Magic is buggy, try to change the safatinet patch.


I have a magisk and safetytest, I did not put a patch separately
kbpwrhd
Message#3199
28.03.19, 09:39
Visitor
**
[offline]

Group: Active users
Messages 23
Check in: 12.09.13
Motorola Moto Z Play

Reputation:-  0  +

Tornvald85 @ 03/27/19 5:28*
kbpwrhd, Download magic 18.2 beta. It helped me.


put the Magisk [18.2 (18122) | 7.0.0 (200)] [CANARY | OFFICIAL]
the card became attached completely without errors, later I will try to pay
Tornvald85
Message#3200
28.03.19, 09:43
Local
*****
[online]

Group: Friendssavagemessiahzine.com
Messages 377
Check in: 09.04.11
Oneplus 6T 8/128

Reputation:-  23  +

* kbpwrhd, it all worked for me. There is a theme, GPay does not work, or something like that ... They advised there. I did a month ago, there was not a single dump.
Cleaning Google services and resets it temporarily.
kbpwrhd
Message#3201
29.03.19, 11:24
Visitor
**
[offline]

Group: Active users
Messages 23
Check in: 12.09.13
Motorola Moto Z Play

Reputation:-  0  +

kbpwrhd @ 03/28/19 11:39*
Tornvald85 @ 03/27/19 5:28
kbpwrhd, Download magic 18.2 beta. It helped me.


put the Magisk [18.2 (18122) | 7.0.0 (200)] [CANARY | OFFICIAL]
the card became attached completely without errors, later I will try to pay


Only today it turned out to pay when magisk was updated to 19.0.

Post has been editedkbpwrhd - 29.03.19, 11:26

162 pagesV  « < 158 159 160 161 162 > » 


 mobile version    Now: 05/20/19 00:22