Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
ZTE Nubia Z11 Mini - Firmware |
Message#1 23.03.16, 10:41 | |
///\\\ [offline] Group: Friendssavagemessiahzine.com Messages 5958 Check in: 14.05.12 ZTE Nubia Z17S Reputation: 3848 | ZTE Nubia Z11 Mini - Firmware NX529J Description | Discussion � | Firmware � | LineageOS based firmware | AOSP � | Themes for NubiaUI � | Modifications and decorations � Important information! Do not forget to backup before any actions with the phone! 1. Save NV, EFS parameters byinstructionsin QSN file. 2. WithTWRP 3.0.2-4select the item "Backup", select all sections, move the slider to the right. After the backup is completed, copy the folder from the internal memory of the TWRP / BACKUPS phone to the PC. In 99% of cases, 2 versions of the device are used in Russia: - European, with internal memory 32GB, section system for firmware 3,88GB; - Chinese, with internal memory 64GB, section system for 2.42GB firmware. Different radio module files, carefully select the firmware! Drivers and Utilities Firmware Official The international version of the phone is 32GB, Android 5.1.1: NubiaUI 3.9.6 version 1.40 NubiaUI 3.9.6 version 1.37 The international version of the phone is 32GB, Android 6.0.1: Attention! In the firmware, data encryption is enabled, incl. TWRP! - shutdown NubiaUI 4.0 version 2.06 NubiaUI 4.0 version 2.05 NubiaUI 4.0 version 2.04 (beta) NubiaUI 4.0 version 2.03 (beta) The Chinese version of the phone is 64GB, Android 5.1.1: NubiaUI 5.0 version 2.11 and older ������� � ������������ ���������� downloadonCloudMail.RuandYandex.Disk.Official modified Based on Chinese, Android 5.1.1: NubiaUI 5.0 version 2.07+ edits from Zveka (universal) NubiaUI 5.0 version 2.04+ edits from Zveka (universal) NubiaUI 4.0 version 1.38, 1.42, 1.44, 1.45 and 1.46+ edits from Zveka (universal) NubiaUI 4.0 version 1.38+ edits from NFound (for a Chinese phone with 64GB of memory) Based on international, Android 5.1.1 (universal): NubiaUI 3.9 version 1.40 NubiaUI 3.9 version 1.37 NubiaUI 3.9 version 1.35 NubiaUI 3.9 version 1.32+ edits from NFound NubiaUI 3.9 version 1.23 NubiaUI 3.9 version 1.21+ edits from isdn2007 Based on international, Android 6.0.1 (universal): NubiaUI 4.0 version 2.06+ edits from Zveka NubiaUI 4.0 version 2.05+ edits from Zveka NubiaUI 4.0 version 2.04 (beta)+ edits from Zveka NubiaUI 4.0 version 2.03 (beta)+ edits from Zveka MIUI The firmware is assembled on the basis of NubiaUI for the US market based on Android 6.0.1. whatdoin case of an error during the first run after installation. - Android 6.0.1: MIUI9 from 03/08/2018 by Xiyan MIUI8 from 03/03/2017 by SiyanG+ edits from Zveka MIUI8 on 02/18/2017 by SiyanG MIUI8 from 02/17/2017 by SiyanG+ edits from mazaxakon - Hposed Flyme Android 5.1.1: Flyme 5.1.11.4R by SiyanG + cleaned version Android 6.0.1: Fresh assembly from SiyanG onofficial websiteFlyme. Flyme 6.7.12.22R Beta by SiyanG(cleaned up from chinese) Flyme 6.7.5.8R beta by SiyanG(with chinese) ROOT, Google Apps SuperSU- select and install from TWRP Recovery. OpenGAPPS- choose ARM64, Android version and package contents (Pico is enough for the Play, it is not recommended above Full - the system partition may not have enough memory) Google APPSfor Android 5.1 (with running mail synchronization in Gmail - does not work in OpenGAPPS builds) Deletion Google APPS Make certification Google play Instructions Installing firmware in pictures Installing firmware from rx-ed90(with outdated links). Adaptation of international (EN 32GB) firmware for the Chinese (CN 64GB) phone version Restoration of "brick" + with test point Repair IMEI, MEID, ESN, SN, Wi-Fi MAC, BT MAC(if you lost your EFS backup) Another network repair guide Repair IMEI, MEID, ESN, SN, Wi-Fi MAC, BT MAC from XDA in English(if you lost your EFS backup) Remove passwords + fingerprint(without data loss) +Alternative option+ can be through the settings in TWRP 3.2.1-5 "Treatment" of problems with notifications on the 4.XX line firmware Disable encryption in stock firmware on Android 6.0.1eitherpatchbefore launching the firmware. Recovery | Kernels Modifications XnubiaUI Customization Module ViPER4Android(improved sound quality) Dolby ATMOS(improved sound quality) Increase the speed of Wi-Fi 2.4 GHz Radio module for the US (EN 32GB) version of the device:1.15 Radio module for European (EN 32GB) version of the device:1.35, 1.37, 1.40, 2.03, 2.04, 2.05, 2.06 Radio module for the Chinese (CN 64GB) version of the device:1.38, 1.21, 1.42, 1.44, 1.45, 1.46, 2.04, 2.07, 2.09, 2.04 (1.38), 2.04 (1.45), 2.05 (1.46), 2.06 (2.04), 2.06 (2.09) miscellanea Service codes + a couple more Official kernel sources Doped Russian translation and graphics for integration into Chinese versions of Android 5.1 firmware (by Zveka)main.zip(1.53 MB) For questions about filling the caps, contact the curator of the topic.Zvekain QMS. Post has been editedZveka - 03.02.19, 15:51 Reason for editing: Link to the section "Modifications and Decorations" |
Message#5642 05.03.19, 19:08 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 435 Check in: 22.10.12 Xiaomi Redmi 4 Prime Reputation: 27 | Guys, advise pixel dialer for 2.06 modified please. -------------------- Xiaomi Redmi 4 Prime 3-23Gb [ROM: Android 8.1] [KERNEL: Inferno] iPad 4 Wi-Fi with Retina display [16Gb] [iOS 10 jailbreak none] |
Message#5643 05.03.19, 20:16 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 124 Check in: 24.09.16 Reputation: 0 | |
Message#5644 11.03.19, 13:43 | |
Visitor [offline] Group: Active users Messages 16 Check in: 06.03.19 Reputation: 0 | Hi people. I installed the off firmware 2.06, decided to reflash the modified 2.06 and as a result wifi does not turn on at all (the slider jumps back) mobile Internet, bluetooth, etc. I want to return it back to the off, in the end, the firmware does not fall at all, the error is ala "not the right file" |
Message#5645 11.03.19, 23:30 | |
Old resident [offline] Topics Curator Group: Curators Messages 951 Check in: 11.03.12 ZTE Nubia Z11 Mini Reputation: 234 | |
Message#5646 12.03.19, 14:27 | |
Visitor [offline] Group: Active users Messages 16 Check in: 06.03.19 Reputation: 0 | Yes, how poorly I painted. The fact is that I made a backup, but it is gone (formatted everything) ((( When flashing the original, it gives an error (attached file)The version of the device 3/32 is also European. But! For some reason, the Chinese firmware rests, but hangs on beyouself (I first tried to fill in 4-5 different original firmwares, for Europeans of course) Does it matter that the / system partition is 2.7 GB in size? Then I put a modification of 2.06+ edits from Zveka, it lay down, but the wifi slider jumps back when trying to turn on WIFI Post has been editedZveka - 12.03.19, 19:18 Reason for editing: spoiler |
Message#5647 12.03.19, 14:30 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 435 Check in: 22.10.12 Xiaomi Redmi 4 Prime Reputation: 27 | |
Message#5648 12.03.19, 15:10 | |
Visitor [offline] Group: Active users Messages 16 Check in: 06.03.19 Reputation: 0 | I downloaded 2 versions of modems for 2 different firmwares. Before the flashing itself, I installed modems. Of course, the corresponding firmware. Modem_1.40_europe_32GB Modem_2.06_europe_32GB These versions Is it correct to fill in the modem.zip before or after the firmware itself? Post has been editedProspector_One - 12.03.19, 15:16 |
Message#5649 12.03.19, 15:52 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 435 Check in: 22.10.12 Xiaomi Redmi 4 Prime Reputation: 27 | Prospector_One,This is a standalone section, no matter when to fill. I just had such squabbles on the same 32 European women after installing the custom and changing the modem to 1.38 Chinese chtoli, which for some reason is present in all the custom layouts, except for curator versions, this is actually nonsense, leaving specific sections In custom, which are laid out for several versions of the device, the first time I see this. Custom always go without a modem usually. Fill in the full firmware 2.06 for recovery, there seems to be a full pack, not only the modem image. Without claims to the respected romodels of our apparatus, but the only caste, which is done perfectly well for us, is nitrogen from u. xyyx, the completion of which is better than moose, let alone aposi moki. In general, more and more I come to the conclusion that in order to have a modern Chinese, as we like, cheap and cheerful, with excellent modern firmware, it is necessary to migrate from the device to the apparat after this developer. Post has been editedindexrts1 - 12.03.19, 16:10 -------------------- Xiaomi Redmi 4 Prime 3-23Gb [ROM: Android 8.1] [KERNEL: Inferno] iPad 4 Wi-Fi with Retina display [16Gb] [iOS 10 jailbreak none] |
Message#5650 12.03.19, 16:28 | |
Visitor [offline] Group: Active users Messages 16 Check in: 06.03.19 Reputation: 0 | That's how it hangs in the wifi sectionAnd just in case Post has been editedZveka - 12.03.19, 19:18 Reason for editing: spoiler |
Message#5651 12.03.19, 19:47 | |
Old resident [offline] Topics Curator Group: Curators Messages 951 Check in: 11.03.12 ZTE Nubia Z11 Mini Reputation: 234 | Prospector_One,Hide the pictures under the spoiler, please, these are the forum rules. What would I do: 1. InstallTWRPand backup at least what's left (all partitions), and save somewhere. 2. Sew2.06 modifiedand install a modem (included in the firmware). 3. Drop the backup / Persist partition from someone else's phone, I think it was there that the failure occurred, it is not affected by the flashing, and restore it via TWRP. On the forum I met backups of this section fromChineseversions, andthe americanIf it does not help, maybe someone from the European will lay out. - Ideally, I would only change the files related to Wi-Fi in the image of your Persist section, so as not to affect the settings of the other sensors, or something is stored there ... - check... |
Message#5652 12.03.19, 22:42 | |
Visitor [offline] Group: Active users Messages 16 Check in: 06.03.19 Reputation: 0 | By the way, on-occasion / Persist, writing in tvrp failed to mount /persist. Does this mean anything? And the second moment, when I make a copy, there is a section / persist, and when I restore it, I cannot select the persist section, as I understand it because it is empty (0 mb). I downloaded the Chinese .rar file that you specified above and did not like point 3. I need to make a backup, transfer these files from .rar to a folder with a backup? Or what? I simply did just that, but the partition / persist is not in the choice |
Message#5653 13.03.19, 00:06 | |
Old resident [offline] Topics Curator Group: Curators Messages 951 Check in: 11.03.12 ZTE Nubia Z11 Mini Reputation: 234 | Prospector_One,it does not need to be mounted, and 0 writes because of the small size of this section (rounding down). Yes, it is necessary to replace the downloaded, throwing it on a USB flash drive, and make them recovery. - It is not entirely clear when backup / restore is done, it is impossible to put a tick there? |
Message#5654 13.03.19, 00:24 | |
Visitor [offline] Group: Active users Messages 16 Check in: 06.03.19 Reputation: 0 | Zveka, When backup is done, you can put a tick on the persist, I put it. That's when you restore, there is no persist section I did this: I made a backup, I put those files from the .rar archive into the backup package (there was nothing to replace except recovery.log) Is that right? Or am I messing around nonsense: D And another question, why the original does not fall? |
Message#5655 13.03.19, 00:45 | |
Visitor [offline] Group: Active users Messages 16 Check in: 06.03.19 Reputation: 0 | Zveka, I apologize: rolleyes: I did a little wrong. I did a copy of everything and everything, but now I chose only a couple of small sections, opened a folder with these files and threw files from the .rar archive there. When I restored, persist appeared. .. wifi works The question about the original firmware (above) remains Post has been editedProspector_One - 13.03.19, 00:47 |
Message#5656 13.03.19, 07:23 | |
Old resident [offline] Topics Curator Group: Curators Messages 951 Check in: 11.03.12 ZTE Nubia Z11 Mini Reputation: 234 | Prospector_One, so the guess was correct, did partition recovery help? - Sew2.06 modified + modem for 32GB, questions should not be. |
Message#5657 13.03.19, 11:59 | |
Visitor [offline] Group: Active users Messages 16 Check in: 06.03.19 Reputation: 0 | |
Message#5658 13.03.19, 12:55 | |
Old resident [offline] Topics Curator Group: Curators Messages 951 Check in: 11.03.12 ZTE Nubia Z11 Mini Reputation: 234 | Prospector_One, I believe that 2.06 was set to "original", and data encryption is turned on in it, so when it is first turned on, it hangs for a long time and encrypts all data in the phone. I myself attacked this rake a couple of times, and as a result I lost all the data in the phone, I thought it would freeze. |
Message#5659 13.03.19, 13:29 | |
Visitor [offline] Group: Active users Messages 16 Check in: 06.03.19 Reputation: 0 | |
Message#5660 13.03.19, 13:47 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 435 Check in: 22.10.12 Xiaomi Redmi 4 Prime Reputation: 27 | Prospector_One,And which one do you sew the original? How do you sew? And what version of emergency recovery is now on the phone? In general, this is a huge minus for ZTE, a disgusting update system, disgusting protection against the "fool" with it, flashing the firmware for this device but another region can drive the device into a brick of an extreme stage, there is not even an image for the fastboot, but the Chinese have managed to do an identical one .. Tin. You yourself know what - this is not even close. And this is at a price of 2 times more expensive ... mda ... without comment ... I suffered from this 529 EU 32gb so that most likely this is my first and last zte most likely. In general, it is very sad that for nx529j the latest firmware is 6 Android and the device is so unpopular. In general, having taken over this device, I was surprised that the RN3 pro works with both the 8m and the gsi system, and on this animal only version 6 of the android is available, and local crafts from the elk and aosp. The device is much better and more interesting. Accurately, but unfortunately it can be stated that 7.1.2 of average quality is the limit for the 529th zte. Sadly, the phone is good ... Post has been editedindexrts1 - 13.03.19, 14:06 -------------------- Xiaomi Redmi 4 Prime 3-23Gb [ROM: Android 8.1] [KERNEL: Inferno] iPad 4 Wi-Fi with Retina display [16Gb] [iOS 10 jailbreak none] |
Message#5661 13.03.19, 14:06 | |
Visitor [offline] Group: Active users Messages 16 Check in: 06.03.19 Reputation: 0 | indexrts1, The originals tried the pieces ... 5, there is the 6th android and the 5th. I tried to try out 2 methods 1-Of course, from the original recovery, I threw the firmware on the flash drive or the phone's memory, renamed update.zip (as indicated on the off-site Nubia) 2- Through tvrp, there is nothing at all to talk about, an instant error "And what version of emergency recovery is now on the phone?" I understand about tvrp in question? Tvrp version 2 was on ... 5 ended and on ... xs) |
mobile version | Now: 05/20/19 04:52 |