[X]Assistant

[Nound]

ZTE Nubia Z11 Mini - Firmware
NX529J
Description | Discussion пїЅ | Firmware пїЅ | LineageOS based firmware | AOSP пїЅ | Themes for NubiaUI пїЅ | Modifications and decorations пїЅ

Important information!

Do not forget to backup before any actions with the phone!

1. Save NV, EFS parameters byinstructionsin QSN file.
2. WithTWRP 3.0.2-4select the item "Backup", select all sections, move the slider to the right.
After the backup is completed, copy the folder from the internal memory of the TWRP / BACKUPS phone to the PC.

In 99% of cases, 2 versions of the device are used in Russia:
- European, with internal memory 32GB, section system for firmware 3,88GB;
- Chinese, with internal memory 64GB, section system for 2.42GB firmware.
Different radio module files, carefully select the firmware!

Drivers and Utilities

Drivers for the device (automatic installation)
ADB Driver (automatic installation)
Nubia Emergency Tool 1.0.6(Russian version)

Firmware

Official

The international version of the phone is 32GB, Android 5.1.1:
NubiaUI 3.9.6 version 1.40
NubiaUI 3.9.6 version 1.37
The international version of the phone is 32GB, Android 6.0.1:
Attention! In the firmware, data encryption is enabled, incl. TWRP! - shutdown
NubiaUI 4.0 version 2.06
NubiaUI 4.0 version 2.05
NubiaUI 4.0 version 2.04 (beta)
NubiaUI 4.0 version 2.03 (beta)
The Chinese version of the phone is 64GB, Android 5.1.1:
NubiaUI 5.0 version 2.11 and older

пїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ download

onCloudMail.RuandYandex.Disk.

Official modified

Based on Chinese, Android 5.1.1:
NubiaUI 5.0 version 2.07+ edits from Zveka (universal)
NubiaUI 5.0 version 2.04+ edits from Zveka (universal)
NubiaUI 4.0 version 1.38, 1.42, 1.44, 1.45 and 1.46+ edits from Zveka (universal)
NubiaUI 4.0 version 1.38+ edits from NFound (for a Chinese phone with 64GB of memory)

Based on international, Android 5.1.1 (universal):
NubiaUI 3.9 version 1.40
NubiaUI 3.9 version 1.37
NubiaUI 3.9 version 1.35
NubiaUI 3.9 version 1.32+ edits from NFound
NubiaUI 3.9 version 1.23
NubiaUI 3.9 version 1.21+ edits from isdn2007

Based on international, Android 6.0.1 (universal):
NubiaUI 4.0 version 2.06+ edits from Zveka
NubiaUI 4.0 version 2.05+ edits from Zveka
NubiaUI 4.0 version 2.04 (beta)+ edits from Zveka
NubiaUI 4.0 version 2.03 (beta)+ edits from Zveka

MIUI

The firmware is assembled on the basis of NubiaUI for the US market based on Android 6.0.1.
whatdoin case of an error during the first run after installation.
-
Android 6.0.1:
MIUI9 from 03/08/2018 by Xiyan
MIUI8 from 03/03/2017 by SiyanG+ edits from Zveka
MIUI8 on 02/18/2017 by SiyanG
MIUI8 from 02/17/2017 by SiyanG+ edits from mazaxakon
-
Hposed

Flyme

Android 5.1.1:
Flyme 5.1.11.4R by SiyanG + cleaned version
Android 6.0.1:
Fresh assembly from SiyanG onofficial websiteFlyme.
Flyme 6.7.12.22R Beta by SiyanG(cleaned up from chinese)
Flyme 6.7.5.8R beta by SiyanG(with chinese)

ROOT, Google Apps

SuperSU- select and install from TWRP Recovery.
OpenGAPPS- choose ARM64, Android version and package contents (Pico is enough for the Play, it is not recommended above Full - the system partition may not have enough memory)
Google APPSfor Android 5.1 (with running mail synchronization in Gmail - does not work in OpenGAPPS builds)
Deletion Google APPS
Make certification Google play

Instructions

Installing firmware in pictures
Installing firmware from rx-ed90(with outdated links).
Adaptation of international (EN 32GB) firmware for the Chinese (CN 64GB) phone version
Restoration of "brick" + with test point
Repair IMEI, MEID, ESN, SN, Wi-Fi MAC, BT MAC(if you lost your EFS backup)
Another network repair guide
Repair IMEI, MEID, ESN, SN, Wi-Fi MAC, BT MAC from XDA in English(if you lost your EFS backup)
Remove passwords + fingerprint(without data loss) +Alternative option+ can be through the settings in TWRP 3.2.1-5
"Treatment" of problems with notifications on the 4.XX line firmware
Disable encryption in stock firmware on Android 6.0.1eitherpatchbefore launching the firmware.

Recovery | Kernels

Recovery
TWRP 3.2.1-5 from NFound
TWRP 3.0.2-4 from NFound + GUI + with ukrainian language
How to get into the factory Recovery
A small FAQ on errors and problems TWRP
Kernels
NForce в„ў kernel for NubiaUI
NForce CPU 2.0 GHz + GPU 650 MHz

Modifications

XnubiaUI Customization Module
ViPER4Android(improved sound quality)
Dolby ATMOS(improved sound quality)
Increase the speed of Wi-Fi 2.4 GHz
Radio module for the US (EN 32GB) version of the device:1.15
Radio module for European (EN 32GB) version of the device:1.35, 1.37, 1.40, 2.03, 2.04, 2.05, 2.06
Radio module for the Chinese (CN 64GB) version of the device:1.38, 1.21, 1.42, 1.44, 1.45, 1.46, 2.04, 2.07, 2.09, 2.04 (1.38), 2.04 (1.45), 2.05 (1.46), 2.06 (2.04), 2.06 (2.09)

miscellanea

Service codes + a couple more
Official kernel sources
Doped Russian translation and graphics for integration into Chinese versions of Android 5.1 firmware (by Zveka)main.zip(1.53 MB)

Survey Screenshots

What do you want to see on the Z11 mini?

What firmware are you using?

For questions about filling the caps, contact the curator of the topic.Zvekain QMS.

Post has been editedZveka - 03.02.19, 15:51

Reason for editing: Link to the section "Modifications and Decorations"

[robertylia]

leksus_1975,
Thank you, let's try)

[Slavik.S2]

Chawoosh @ 10.10.2016, 07:27

It is written the same - adb and fastboot are not installed.

I recently stitched at 1.32, I also had such crap, after several attempts everything started up, I thought the cable didn’t connect, there was no sense in changing cables, last time it was not clear what allowed me to flash ....

[Alonelogan]

If you are too lazy to switch from the modified 1.32 to 1.36 with wipes (adjusting everything anew), there is such an option - to put the modified 1.36 from the header on top of the existing 1.32. Two nuances: after launching, the phone will notify you anyway about the availability of the update, start downloading it and stop it, then a notification about the interruption of the download will come, click on remove, everything; the second - flies root, sew again.

[Slavik.S2]

continuation of the story with TWRP, decided to upgrade through the air, the update was downloaded, the phone rebelled and attention! will boot into TWRP, I didn’t understand where it came from, on the computer when I started it, it seemed to click once, in general I didn’t get the update, I decided to install 1.36 modified while TWRP worker was running)) zip did not pass the check for some reason, spat, decided to risk and installed without checking the archive, everything works))))

[gokvo]

Official firmwareZ11mini (NX529J) V1.36

[Nound]

Gokvo @ 10.10.2016, 05:59

Official firmware Z11mini (NX529J) V1.36

Yeah, there is already a permanent link in the cap. And do they vryat something changed compared to the incremental update)

[gokvo]

Nound,

Because I did not download it. I am satisfied with your firmware. But this is a fact, 1.36 from today, the official firmware.

[robertylia]

Hayelp! I wanted to switch to the official international firmware from the header, and something went wrong, in the end, an endless download, how to be ??
Now he loads me right in the stock recovery

Post has been editedrobertylia - 11.10.16, 11:13

[jeff72]

gokvo

How to download?

Can you put V1.36 on Yandex?

thank

[gokvo]

jeff72,

In the morning, the speed was small and I did not bounce. Now, apparently due to the large download, Nubia has limited the possibility of direct download. Only in the cloud.

UPD: At the moment, the firmware is again available for download.

Post has been editedgokvo - 11.10.16, 13:54

[Slavik.S2]

Robertylia @ 10/11/2016, 11:12

Hayelp! I wanted to switch to the official international firmware from the header, and something went wrong, in the end, an endless download, how to be ??
Now he loads me right in the stock recovery

ZTE Nubia Z11 Mini - Discussion

[robertylia]

I restored it through TWRP in general) did anyone put the official firmware from the manufacturer's website? Is there any version of them?
Now I download the second link off the firmwarehttp://www.nubia.com/i...ort.php?a=phone&pid=16

Post has been editedrobertylia - 11.10.16, 12:52

[Deggraf]

Tell me, in terms of the terms, please, I am reading this forum and I don’t understand half of it, I’m not a specialist in firmware, but I need to figure out how I bought the Z11mini.
Tell me, what is PTA, wipes, ruin ... I do not understand, maybe there is a dictionary somewhere?
Today, the update UI4.0 has come. Tell me if there is something new there and when I load into which folder it loads it on the phone I can not find this archive via TV?
Thank you very much!

[robertylia]

DeGGraF,
What is your firmware version?
Well, in short, I can say that OTA is an update over the air, wipes are to clear the data (optional), root gives you complete control over the system, which allows you to edit and modify system files and folders, and more.

[Deggraf]

Thank you very much!
In the information about the phone, I have build 1.32, I tried to flash as you are called with dance and tambourines), I don’t know if all the files turned out or downloaded all the files from the header, and installed Google, but I did everything mechanically and on a whim! And the version of nubia UI 3.9.6.2

Posted 11/10/2016, 17:11:

Robertylia @ 10/11/2016, 20:35

robertylia

And if the root rights in the firmware are available, does this mean that we say the serbis of Sberbank and other payment systems are not installed?

[Nound]

DeGGraF @ 10.10.2016, 16:10

And if the root rights in the firmware are available, does this mean that we say the serbis of Sberbank and other payment systems are not installed?

Sber will work, but only by templates. Therefore, there is no default root with Modified 1.36 (I also saved: D)

Post has been editedNound - 11.10.16, 18:21

[leksus_1975]

For the full functioning of the Savings Bank application, please contact the Sberbank office.

[AS4U]

NFound @ 10.10.2016, 18:21

Sber will work, but only by templates. Therefore, there is no default root with Modified 1.36 (I also use the sber)

Leksus_1975 @ 10.10.2016, 18:35

For the full functioning of the Savings Bank application, please contact the Sberbank office.

Put the Xposed + module in it Sberbank Unroot. After activating the function, the online Sber doesn't see the root and works with full functionality.

[Slavik.S2]

go to the savings bank online from the browser and do not worry)))

[Alonelogan]

DeGGraF @ 10.10.2016, 15:58

I can not find this archive via TV

OTA updates are put with stock recovery, and not custom.