ZyXEL / Keenetic Omni - Discussion | [wifirouter]



Rep: (3399)
ZyXEL Keenetic Omni - Discussion


A photo:
Attached Image

Attached Image

Description:
Internet center for a dedicated Ethernet line, with a Wi-Fi 802.11n 300 Mbit / s access point, an Ethernet switch and a multifunctional USB host
Specifications:
Link Duo technology for simultaneous work on the Internet via PPTP / L2TP / PPPoE and with resources of the regional network servers
Ability to connect to Internet service providers providing services based on VLAN (IEEE 802.1Q)
The ability to assign multiple additional physical WAN interfaces to the ports of the integrated Ethernet switch (Multiple WAN)
Internet connection reservation via 3G / 4G USB modems and additionally assigned WAN interfaces
Hardware support for IP TVTVport to watch TV on IPTV receivers and computers, including via Wi-Fi
SPI DoS Attack Firewall
IEEE 802.11n MIMO 2x2 300 Mbps * Wireless Interface *
Multifunctional USB host controller for 3G / 4G modems, network usage of USB printers and USB drives
Built-in BitTorrent Transmission Client
Built-in Internet filter Yandex.DNS
Parental control SkyDNS
Supported features and protocols

IPoE / PPPoE / PPTP / L2TP / 802.1X
Multiple PPP Tunnel Support for Internet Access and Virtual Private Networking (VPN)
PAP / CHAP / MS-CHAP / MS-CHAP v2
MPPE (Auto / 40/56/128)
Full-featured IEEE 802.1Q VLAN implementation
TVport technology
Link Duo Technology
DHCP (client / server)
Work with static IP address
Dual stack IPv4 + IPv6, working without additional settings. 6in4 tunnel for access to IPv6 from IPv4 networks
The mechanism of address translation (Full feature NAT) with the support of several external IP-addresses; ; reassignment of network interface roles.
Route table (DHCP / manual)
Firewall with connection control and flexible filtering rules
Port forwarding with the ability to select a destination port in the local network
Reassigning Network Interface Roles
Automatic Port Forwarding (UPnP)
Blocking Internet access based on MAC address, IP address, TCP / UDP ports
IGMPv1 / IGMPv2 (IGMP proxy, IGMP snooping)
VPN connection transit (PPTP or L2TP)
DynDNS and NO-IP client
USB applications
Multifunctional USB host controller with simultaneous operation of multiple devices via a USB hub
Supports over 60 models of 3G and 4G (LTE) mobile internet USB modems
Network usage of USB-drives with FAT / FAT32 / EXT2 / EXT3 / NTFS / HFS + file systems:
Microsoft Windows Network Sharing
FTP server with access from the Internet, passive mode, up to 10 simultaneous connections
BitTorrent Client Transmission
Management of access rights to information on USB-drives at the directory level
Network printing on a compatible USB printer (except GDI printers)
Wi-Fi wireless network
IEEE 802.11 b / g
IEEE 802.11n (auto 20/40 MHz, 2x2 configuration, up to 300 Mbps *)
Frequency range - 2.4 GHz
WEP / WPA-PSK / WPA2-PSK network protection, MAC access control
Organization of up to four independent wireless networks on a Wi-Fi access point (Multiple SSID)
Quick WPS Setup
Wi-Fi Multimedia (WMM)
Design features

MIPS (R) 24KEc 580 MHz MediaTek MT7620N processor with network hardware accelerator
64 MB DDR SDRAM memory
5 RJ-45 connectors (10BASE-T / 100BASE-T) with auto-sensing cable type
1 USB 2.0 Type A connector
2 external Wi-Fi antennas (3 dBi, non-removable)
9 status indicators
Wi-Fi wireless control button
Assignable button (FN)
Power button
Reset Button
Physical parameters

Dimensions - 166 x 116 x 34 mm excluding antennas
Weight - 0.22 kg without power adapter
Useful links:
A photo
desoldering console on the boards
Kepeys Internet Centers
4G IIl rev.A / Omni / Omni II

Firmware 2.09 for ZyXEL Keenetic Omni router
Stable unofficial firmware version 2.08.C.2.0-0 from 04/17/2017
Unofficial beta firmware version 2.09.B.0-0-1 from 06/06/2017 for Omni
Detailed instructions for restoring the service code / serial number
Firmware 2.10 for ZyXEL Keenetic Omni router
Stable unofficial firmware version 2.09.C.0.0-1 dated 07/20/2017 for Omni
Stable official firmware version 2.08.C.2.0-2 from 08/31/2017 for Omni II
Stable unofficial firmware version 2.09.C.1.0-0 from 09/09/2017 for Omni
Stable unofficial firmware version 2.09.C.1.0-0 from 09/09/2017 for Omni II
Firmware 2.11 for ZyXEL Keenetic Omni router
The official stable firmware version 2.08.C.2-4 from 10/18/2017 for Omni II
The official beta firmware version 2.07.C.5.0-0 dated 10/20/2017 for Omni
Dump of memory taken from a flash of the Internet center ZyXEL Keenetic 4G III rev.A
Stable unofficial version of firmware 2.09.C.1.0-1 dated 10.19.2017
Unofficial beta firmware version 2.11.B.0.0-0 from 12/28/2017 for Omni, Omni II
Firmware 2.12 for ZyXEL Keenetic Omni \ Omni II router
Stable unofficial firmware version 2.10.C.2.0-4 from 01/15/2018 for Omni \ Omni II
Stable official firmware version 2.08.C.2.0-8 dated 02.02.2018 for Omni II
Stable unofficial firmware version 2.11.C.1.0-3 from 04/12/2018 for Omni \ Omni II
Experimental firmware version draft 2.13 for ZyXEL Keenetic OmniI router
Experimental firmware version draft 2.13 for ZyXEL Keenetic Omni II router
Stable unofficial firmware version 2.14.C.0.0-4 from 12/26/2018 for Omni, Omni II
Stable unofficial firmware version 2.15.C.2.0-2 from 03/21/2019 for Omni and Omni II
Tabble unofficial firmware version 2 .15.C .3.0-0 from 04/01/2019 for Omni and Omni II
Stable unofficial firmware version 2 .15.C .3.0-2 dated 04.22.2019 for Omni and Omni II
Stable unofficial firmware version 2.15.C.4.0-1 from 05/16/2019 for Omni and Omni II
Stable unofficial firmware version 2 .15.C.5.0-1 from 06/21/2019 for Omni and Omni II
Stable unofficial firmware 2.16.D.1.0-0 from 16.09.2019 to Omni and Omni II of


There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links, or through QMS.

Post has been editedstp101 - 06.10.19, 13:39
Reason for editing: Stable unofficial firmware 2.16.D.1.0-0 from 16.09.2019 to Omni. Omni II



Rep: (0)
The DVR on the first day of his work can be connected through a smartphone, but only on the local network, and why it is only 30 seconds with each connected less and less. It does not connect right now.
All the same sin on a router, or an operator (MTS) limits. Ip gray .... 192. Router Firmware latest official. Suspicious seems to me you can not connect to the router via the app on your smartphone. Even in LAN. Can try to restore the service code, and that's the problem?



Rep: (0)
Lokalke must all work if does not work, then the problem is either in the DVR or in a router. The method of elimination to help



Rep: (1)
Hello, this problem after flashing zyxel omni 2 version on 2.14.S.0.0-4 can configure the modem zyxel keenetic plus dsl, and the 'Net does not work without it. Do not tell how to fix it.



Rep: (0)
In addition to my post above. I turned to the "support". The data sent to the router. Router proved bogus.



Rep: (25)
Lexx1975 @ 21.03.2019, 23:42*
In addition to my post above. I turned to the "support". The data sent to the router. Router proved bogus.

Show me pictures of the body, and of the board, if any. The first time I read about fake routers.



Rep: (13)
Prompt, on what firmware padavan download speed of torrents?



Rep: (1091)
Stable unofficial firmware version2.15.C.2.0-2 on 21/03/2019for omni

Component kit
base
config-ap
corewireless
ppp
config-client
pppoe
usb
config-repeater
ppe
pptp
dhcpd
l2tp
igmp
kabinet
miniupnpd
cloud
cloudcontrol
usbmodem
pingcheck
usbnet
usblte
trafficcontrol
ddns
nathelper-ftp
nathelper-pptp
nathelper-sip
components

Changes
2.15.C.2.0-2

Fixed mobile app engagement My.Keenetic on iOS
Wi-Fi: fixed traffic counters when the hardware accelerator mt7615
Wi-Fi: fixed spontaneous reboot access points (Call trace: RTMP_OS_Del_Timer)
Wi-Fi: Fixed 36-144 channels City (KN-1510)
SMB: Fixed the problem of access to resources for the user admin
Web: removed option "Enable Repeater MAC-address" of unsupported devices (reported @ drugold)

* Officially released for Keenetic Giga (KN-1010), Start (KN-1110), 4G (KN-1210), Lite (KN-1310), Omni (KN-1410), City (KN-1510), Air (KN -1610), Extra (KN-1710), Ultra (KN-1810), Viva (KN-1910), DSL (KN-2010), Duo (KN-2110), Start II, Lite III rev.B, 4G III rev.B, Giga III, Ultra II, Air and Extra II. Assembled in the draft and the delta for archival models.

(c)https://forum.keenetic.net/

Installation process and debug mode
1. Download the firmware version 2.15.C.2.0-2
2. Installby file upload.
3. Check the work.

If after installing 2.15.C.2.0-2 any problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disabledebug mode.
6. We send debug self-test fileofficial technical support.

NDM HW ID Decryption
Keenetic Omni EMG1312-R10A-RU01V1F kn_rc

Attached filekn_rc_delta_2.15.C.2.0-2.zip(6.32 MB)

Mirror:
cloud.mail - v2.04-v2.15 Firmware Keenetic
yandex.disk - v2.04-v2.15 Firmware Keenetic


Stable unofficial firmware version2.15.C.2.0-2 on 21/03/2019for Omni II

Component kit
base
config-ap
corewireless
ppp
config-client
pppoe
usb
config-repeater
ppe
pptp
dhcpd
l2tp
igmp
kabinet
miniupnpd
cloud
cloudcontrol
usbmodem
pingcheck
usbnet
usblte
trafficcontrol
ddns
nathelper-ftp
nathelper-pptp
nathelper-sip
components

Changes
2.15.C.2.0-2

Fixed mobile app engagement My.Keenetic on iOS
Wi-Fi: fixed traffic counters when the hardware accelerator mt7615
Wi-Fi: fixed spontaneous reboot access points (Call trace: RTMP_OS_Del_Timer)
Wi-Fi: Fixed 36-144 channels City (KN-1510)
SMB: Fixed the problem of access to resources for the user admin
Web: removed option "Enable Repeater MAC-address" of unsupported devices (reported @ drugold)

* Officially released for Keenetic Giga (KN-1010), Start (KN-1110), 4G (KN-1210), Lite (KN-1310), Omni (KN-1410), City (KN-1510), Air (KN -1610), Extra (KN-1710), Ultra (KN-1810), Viva (KN-1910), DSL (KN-2010), Duo (KN-2110), Start II, Lite III rev.B, 4G III rev.B, Giga III, Ultra II, Air and Extra II. Assembled in the draft and the delta for archival models.

(c)https://forum.keenetic.net/

Installation process and debug mode
1. Download the firmware version 2.15.C.2.0-2
2. Installby file upload.
3. Check the work.

If after installing 2.15.C.2.0-2 any problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disabledebug mode.
6. We send debug self-test fileofficial technical support.

NDM HW ID Decryption
Keenetic Omni II EMG1312-R10C-RU01V1F kn_rf

Attached filekn_rf_delta_2.15.C.2.0-2.zip(6.33 MB)

Mirror:
cloud.mail - v2.04-v2.15 Firmware Keenetic
yandex.disk - v2.04-v2.15 Firmware Keenetic
Picture


Post has been editedenpa - 27.03.19, 18:58



Rep: (5)
Citizens, plz tell me.

Sabzhevoy I have a router and a modem Megafon 4g.

The router took specifically for the modem in the hope that the router will not cut the speed as ASUS rtn66u.

But! Subject just cut exactly in half speed. If the modem is thrust in the comp directly - the speed of 40 megabits, Ping through the router 20. If the - rate of 20 megabits, Ping 50.

What should be done to speed it does not cut it?



Rep: (37)
* chuka
What is a modem? Under the hood Set))) does not cut, the dough this bunch)) router firmware 2.11 D was in the modem firmware haylink



Rep: (0)
* chuka In the list of devices on the router computer shows what standard the connection 11g or 11n? There is a suspicion that the computer via wi-fi he cut speed.



Rep: (0)
* Arbo,
[Attachment = "15827657: 20190203_154829.jpg"
Fake router was white with four antennas. Number s / n Lime (in support of the said)

Attached images
Attached Image



Rep: (5)
* sabvirov ,
Modem megaphone 150-2, aka Huawei, do not remember the number)
Huawei to alter, but not haylink.

Posted on 30/03/2019, 13:51:

* zoolo4 ,
Not kompovy vayfay does not cut, the same sim card in the distribution from the phone to the computer sometimes gives as much 50 megabits.

Mb a buggy modem via a router that gives less speed?

Post has been editedchuka - 30.03.19, 13:52
Reason for editing: Blunted



Rep: (23)
question for users Keenetic Omni II
firmware 2.05, a native of the box. I never really paid attention to speed.
moved to rate 100Mbit / s and noticed - on spidtestu, on the laptop, on Wi-Faya download speed of 50-60, the return of 70 (on a cable without the router, ie directly from the switch to the laptop closer to 85-95).
on TV about 40mbit / (supports 802.11n )
configured access point router only 802.11bgnand other (ie only 802.11n not)
so the same "protection network" me "WPA2-PSK" - read in the internet that use "n"Necessary" WPA2-AES".
search found that if you put only"n"And protection "WPA2-AES"The rate of increase.
Is it so? have-a chance that closer to 80-90 Mb / s?
in the new firmware has a range of only "n "And" WPA2- AES "? What bug-free version?
or, purely out of your experience, all these theories and the "jigger" not worth?



Rep: (823)
* pavluh990 ,
rate also depends from the client and from external factors (ester), seeseveral articlesof base keenetic on wifi.

Post has been editedvaleramalko - 30.03.19, 16:01



Rep: (23)
valeramalko @ 30.03.19, 16:01*
speed still depends on the client and on external factors

thanks! almost all of which I have already read. it otduda me and have any questions.
We have questions about 802.11 Onlyn and WPA2- AES - ie there-whether in the implementation of this new firmware my router and how it will affect the speed of Reale ?



Rep: (823)
pavluh990 @ 30.03.19, 18:37*
only 802.11n

If you do not have old devices with '' g '', then do not bother, judging by your test devices are working in the '' N '' mode.
pavluh990 @ 30.03.19, 18:37*
WPA2-AES

enabled by default: WPA2-PSK with AES encryption algorithm.

Post has been editedvaleramalko - 30.03.19, 16:54



Rep: (0)
How to solve the problem with the router Omni 2. I go out to the Internet via a modem 3372 by MTS haylink firmware and Simcoe on a smart Iota. The fact that the distribution of Internet vayfaya disabled. What is the problem?



Rep: (180)
Dragoncaxa @ 31.03.19, 12:00*
What is the problem?

It can start with to bypass restrictions on the distribution iota. And then on the router to sin?



Rep: (12)
* Lexx1975, Well, it's ZBT WE1626, with aliekspress already someone sells stitched and even glue stickers. Sam bought this, from China, but without alterations. Stitch and glue sticker, apparently already in Russia.



Rep: (37)
Nikkolss @ 31.03.19, 21:16*
Stitch and glue sticker, apparently already in Russia

There is no such)))) and the router full of ... tested it already, even yusbi output voltage danced as he wanted, if anything would be better / have to take Avito-yul


Full version    

Help     rules

Time is now: 25/11/19, 12:14