Semper Media Center (in short, SPMC) - it is Android-plug Kodi, former accompanying android Kodi, Koyinghttp://spmc.semperpax.com

But Firmware: Android 7.1https: //androidpctv.co...allwinner-h3-soc-v114/the only question is the substitution in boxing

Post has been editedsweta321 - 18.06.19, 19:48

In general, one console buggy, hang on the dead, retarding, and so the solution is simple, remove all Google stuff he basically does not need this pirate stuff, then install KillApps to turn off background processes, Sseaner to clean the receiver from the cache and the rest of the trash and all the receiver will be unable to fly hang and fail to work will be stable without any problems, but still one go on through for example X-plore in advance by putting SuperSUfocus set without updating the file at startup if the offerin the system log in prive-install folder and delete all the installation file, but you can in one in the same system folder in the media to replace the boot logo is attached to the message bootanimation!
After unloading the receiver from the trash is rarely available memory will decline less than 400Mb well as in standby mode or when viewing satellite or T2 will not be less than 500Mb like mine on the screenshot near the clock and weather shows free memory, photo attached.
P.S. For more convenient use of the receiver, and the access to the program is recommended to use an application such as the "Start" menu in windose panel it is possible to install the widget PPP for example to connect a modem, Mega Watch as the image below shows the constant time, local weather more tuned my memory and can be CPU load, etc. as for the functionality of the receiver with a modern twist, you can install this app as a Floating Apps principle PIP it is very convenient when watching TV, you can trigger a mini browser to surf nga Internet, the program is limited to the application but you can add widgets you have installed prilozheniy.V generally can be in an open browser trigger a mini audio player window or mini Yutuba window, the window can be moved anywhere on the screen.
Well, in general, see for yourself who needs what to me, only one remote and a wireless mouse. See for yourself on the same consoles have a lot of programs and applications, such as for example, I put the keyboard that can be customized to your taste (photo attached), this hour will understand the method of recovery of the receiver via a PC is possible there will be new releases of firmware with an increase in the android and improved labor, most receiver hardware has lived his life and already have a lot of options for smartphones The only thing they just need to fasten the receiver.




bootanimation.zip(2.1 MB)

Here's firmware by such a miracle solutionhttps: //www.zeletro.co...tor-fta-phantom-cinemaLast updated on 06/26/2019 V4.04 learned from the indigenous owners of this miracle of the receiver that the latest firmware everything works consistently leads broadcast on the internal network to the other device supports bluetooth, WIFI 5G full 16bit 4K which broadcasts from satellites plug-in card sharing is the same as here improved and is working fine with auto updating PV, etc. keys Only there are no two satellite tuner T2https://m.youtube.com/watch?v=MLd43eq_c6cFirmware on it too but put the remote control does not work it is necessary to govern. Here she firmwarehttp: //www.mediafire.c...signed-signed.zip/fileandhttps: //www.mediafire....MyPtRA5jbk3TRpykV7Odzw


I'll have to watch it from there to tear the new emulator but fits perfectly.
Here is a new version of the emulator 2.16


FZCAPlugin 2.16.rar(687.54 KB)


Post has been editedsweta321 - 01.07.19, 06:54

Everything fell into place! Booox Smart Combo [Android] analogue Phantom Cinema 4k, PHANTOM SOLO 4K, SOLO 4K PASSO-A-PASSO but they have modified the android and hardworking!
Here I am pulled IPTV player with their firmware fully functional on our receiver receives over 1000 channels automatically but not in Russian but at least I have not figured out, the player is very good and clear channels of good quality such as a source of SKY is sport, erotic, music and etc. after leaving of the player it is necessary to restart because all the default applications are stopped but the self is not there in the firmware of the PHANTOM (I say the same work perfectly even on our receiver, iron the same thing as himself WIFI 5G 300Mb.Escho spread one emulator by PHANTOM not really sorted out but on our work and the receiver is configured not to Russian settings and not quite the same as the standard! it is necessary to check what he obsche.Escho pulled FZCAPlugin_v40 new emulator can be installed on top of the old, the same protocols that the new is not clear but it seems like working luchshe.Escho player Canais_Phantom just installed on our receiver has the support of Russian language channels 150, film, Russian radio, EPG does not figured out a subscription offer of 18 months free!


SSSharePluginV2.24.Alien-signed-signed.zip(851.66 KB)
Phantom_IPTV.zip(48.72 MB)
FZCAPlugin_v40.zip(838.39 KB)
Canais_Phantom.zip(7.19 MB)


Post has been editedsweta321 - 01.07.19, 20:12

Maybe someone will be able to find a reference or to remove the dump from a running receiver IPTV receiver Booox Smart Combo in the image file extension img.

Post has been editedsokol2012RUS - 08.07.19, 17:37

Img Why the need? If sources from the manufacturer there. There are of compatible receivers tpkoe resolution for example from the phantom iznochalno then moved to the archive.

Post has been editedsweta321 - 08.07.19, 18:01

in the image file extension img need to be able to write the firmware on the sd card.

Post has been editedsokol2012RUS - 08.07.19, 18:55

sokol2012RUS, At the receiver, the internal memory has -reductive img from where it is possible to restore the button you just pull out, but so easy to razraboram for obrozom address development and support zakonchina will think! And what is it so difficult? Himself receiver can not run from a flash drive who knows that there is a binding arhetektury processor can boot does not pick up on the run but only for the installation, and then again where he will raskidovat library besides provernot for this very RAM, well, even if provernot the brake will how dinozavor! Simply then enigma to collect for him, I think more as an option. WHAT YOU WITH FLESH unit does not operate or what?

yes it does not work, if you can, then drain the dump from your receiver

sokol2012RUS, You try for example by Phantom Cinema 4k img download and test the receiver will start to download, if so then come up with something native.

Share a link to img, not zip

sokol2012RUS, Here is http: //www.mediafire.c...23_1808301626.iso/file

iso does not matter, it is necessary to img

sokol2012RUS, What the? Have you any idea what you're doing? http://filesreview.com/ru/convert/iso-to-img

iso does not matter, it is necessary to img

format media files for pick-up with usb etc. correctly though you are doing? Try through various utilities and other Rufus must pdhvatyvat with usb sd through the works! If you just do not throw the firmware file that you do not give, and in this sense is not an empty time to kill.

Post has been editedsweta321 - 09.07.19, 08:58

iso firmware file does not open any program and therefore can not be converted

We need a full dump of the native receiver in img

Post has been editedsokol2012RUS - 09.07.19, 21:10

and what makes you think that he should be revealed? If manufacturers open access to their development, how they earn money? The fact that the IDF uneversalny it can be both of a run-axis and with the boot! And you are exactly sure that you flesh died? I think so that the receiver itself has died or you are manipulating demolished loader and without native preloader you did not restore! Put two usb firmware is necessary to try, as seen under the body on board which the connector that's just not had the time razberayus that for it but most likely service

Post has been editedsweta321 - 10.07.19, 04:03

We need a full dump of the native receiver in img

sokol2012RUS, Check in vostanovitelny system does not form a tar archive as chtr if needed img means it is necessary to remove the cable from the receiver to the img file or to remove proizvoditelyu.Ya can not let it bother vremyani and no to the same mobile traffic will not allow to fill in the image net! There is not nothing I can help.

Yes indeed due to Google's receiver slows down and not quite bad in the latest firmware up to hang on the dead.
I am searching for a way to remove the entire Google stuff from the receiver and eventually the receiver began to work steadily but in fact the nut replace Google Play to install the necessary programs and update already installed need the full set of Google services. Long sought a third-party market but what is not normal, and if the application downloads to install something on the receiver does not work because the supermarkets do not take into account the version of android, and the parameters of the motherboard receiver.
And finally caught Aptoide_9.9.3.0 interesting application from the TV on Android, and that the most interesting stands application works without Google services, and selects those applications which are compatible with the convenience store just to the receiver but for the full of his work necessarily need root rights.
Such a course of action to disable but it is better to remove completely from the system to install Google services Aptoide_9.9.3.0 grant rights and to use but there is not a big bug when the application chyut retarding as start and exit the same can be prilozheniya.Tak Aptoide register but not necessarily possible use and without registration.


Aptoide_9.9.3.0.zip(22.48 MB)

A good player MOD to view IPTV as a reference and do m3u lists, m3u8, xml works with remote control simple concept many supported features but the most important thing I have noticed a steady pause the live broadcast. In general, check the support of the bucket 4.2.2 below are not checked.
//savagemessiahzine.com/forum/d...%CA%C0%CD%C0%CB%DB.apk]

Post has been editedSrybkin - 05.08.19, 23:13