Assistant
REPLY |
Projection screen |
Message#2302 12.03.19, 01:29 | |
Novice [online] Group: Active users Messages 36 Check in: 18.10.08 Reputation: 0 | All screens, plus or minus, for this price are identical in display quality. The build quality here may be differences, but not very large, again, if you look in the same price category. Over time, the roll-up screens may slightly (literally a few mm) bend the bar on which the web is wound, and then diagonal waves will appear to the center in the form of a letter V. Most often this happens if the screen width is over 2 meters. Then laid out a few pages back video with a solution using the installation of a powerful magnet on top of the casing. Perhaps from the deflection, the bars and edges on the side also start to bend, since the load goes unevenly and the banner is slightly pulled under its weight, but this is inaccurate. So in my opinion the quality of the bar decides, and not how to keep it open or closed. Many thanks for the response. Those. better to reorient in the direction of 180cm, I understand you correctly? Is Draper Luma a higher price category or, in terms of quality, is this manufacturer in the same line with Lumien, Digis, Classic Solution? As I wrote, I, unfortunately, have to consider only roll-type screens. The budget is not more than 10 thousand. What would you take for this money? Post has been editedmaxsmnv - 12.03.19, 01:29 |
Message#2303 12.03.19, 08:42 | |
Local [online] Group: Friendssavagemessiahzine.com Messages 164 Check in: 10.04.11 Reputation: 3 | As I wrote, I, unfortunately, have to consider only roll-type screens. The budget is not more than 10 thousand. What would you take for this money? A few pages ago, I posted a review about buying a DEXP screen in a DNS store. In principle, after fixing the problem, the screen does not cause any other complaints. |
Message#2304 12.03.19, 14:01 | |
Novice [online] Group: Active users Messages 36 Check in: 18.10.08 Reputation: 0 | Hello everyone again! I would be very grateful if you help choose the best quality within the budget. There are 10 thousand rubles per screen. What screen would you take? Projecta / Draper / Digis / Lumien / Classic Solution / Sakura Pro? or are they absolutely all the same in quality? Just read about Draper - a direct sight, any way to read Projecta seems to be positioned as a higher segment compared to Digis, but positioning is one, and reality is another :))) |
Message#2305 12.03.19, 21:27 | |||
Visitor [offline] Group: Active users Messages 28 Check in: 30.06.08 Fujitsu-Siemens Loox N560 Reputation: 0 | Hello! bought at one time the projector Epson-EH-TW5300 Now it is hanging and looking at the screen with dimensions like in the picture. the screen itself was made of wood and over the years has been deformed. fabric bought I don’t know good or bad, but we looked with pleasure))) I want a new screen, what fabric will you advise -https: //www.carlofet.c...reen-raw-material.html -or Gennady from Ukraine -or..... ? and frame -http://west-art.ru/mega-frame/ Now I have a white screen) all good)) Post has been editedEugenfrank - 12.03.19, 21:29 | ||
Message#2306 12.03.19, 21:32 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2922 Check in: 05.09.10 Xiaomi Redmi Note 5 4/64 Reputation: 125 | EugenFrank In general, we also sell material for blackout curtains, something for the price of 500 rubles per meter. And the frame can be made from the laths, at times cheaper than the one under the link. Posted 12/03/2019 at 21:34: EugenFrank And even better, if the screen is stationary, buy a sheet of HDF, paint tikkurila h499 Kohler, make a frame of the rails, nail the HDF on the frame of these rails, paint with a roller, make a black frame and here you are for a couple of thousand just awesome screen. Post has been editedmyboris2005 - 12.03.19, 21:35 -------------------- |
Message#2307 13.03.19, 07:17 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 334 Check in: 17.01.17 Reputation: 6 | |
Message#2308 13.03.19, 08:20 | |
Visitor [offline] Group: Active users Messages 28 Check in: 30.06.08 Fujitsu-Siemens Loox N560 Reputation: 0 | myboris2005 and Grano4ka, thanks for the owl. I read in the branches about the painting option, but I wanted the screen exactly from the fabric)) In the frame I agree, you can "leave" again in a wooden frame. my link is not blackout material for curtains, but Projector Screen Material (4K, HD, 3D, Dark to Moderate Ambient Light, Tension-Mounted) navryatli curtains will be more effective. The task is not for 2000 rubles, but with some sort of "safety margin" in time and technology. all the same on the fabrics. About the fabric Carl's Ambient Light Rejecting (ALR) found out a couple of pages back in this thread)) What is popular for today, given the price / quality? |
Message#2309 13.03.19, 08:35 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2922 Check in: 05.09.10 Xiaomi Redmi Note 5 4/64 Reputation: 125 | Yes FIG knows. These are curtains that are completely lightweight. There are gray, there are white. -------------------- |
Message#2310 13.03.19, 11:57 | |
Visitor [offline] Group: Active users Messages 28 Check in: 30.06.08 Fujitsu-Siemens Loox N560 Reputation: 0 | what is popular for today from fabrics, taking into account price / quality? Carl's Ambient Light Rejecting (ALR) fabric is not perfect))) |
Message#2311 13.03.19, 13:32 | |
Novice [offline] Group: Active users Messages 43 Check in: 03.05.12 Reputation: 4 | Those. better to reorient in the direction of 180cm, I understand you correctly? Is Draper Luma a higher price category or, in terms of quality, is this manufacturer in the same line with Lumien, Digis, Classic Solution? As I wrote, I, unfortunately, have to consider only roll-type screens. The budget is not more than 10 thousand. What would you take for this money? No, take that screen size you need. I meant that the probability of receiving waves on large screens will be greater over time. I would take the electric drive and the maximum desired size of the picture from the projector. For a tick, you can take a 16: 9 screen, because they have extradrop on top, but for example most films still have a different ratio, so there will be no sense from the border above and below. Up to 10k in this case, the choice will not be very big, sakura / cactus is in my opinion the same level, not so long ago they release screens and most likely just take oem screens from China and label them under their brand (like dexp). I can’t say anything about Classic Solution and Lumien, but I would probably choose them. If there are stores specializing in projectors or office equipment in the city, it is better to go to view / touch the screens, consult the seller. I have the most stationary homemade version. In principle, if you are concerned that the waves suddenly appear, you can try to return as a factory marriage within a year (or two, if you are well aware of the law on consumer protection). |
Message#2312 13.03.19, 22:23 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 65 Check in: 30.06.12 Reputation: 3 | Guys, check, pliz my calculations to determine the width of the screen - did I calculate everything correctly? There will be an Xgimi H2 projector. room 307cm screen from the wall 25cm projector width 20cm from the wall to the projector 5cm distance from the lens to the projection 257cm projector ratio 1,2 screen width 214,17cm screen height 120.47 cm (at 1980 * 1020 resolution) diagonal, cm 245.72 diagonal, "96.74 While the projector is going I want to buy a screen - or is it worth it to first put and project to the place where the screen will be? And estimate the size of the fact? Thanks in advance for your reply! Post has been editedNikita_apt - 13.03.19, 23:09 |
Message#2313 13.03.19, 22:56 | |
HTC U 11 [online] Group: Friendssavagemessiahzine.com Messages 1821 Check in: 24.04.11 Reputation: 102 | |
Message#2314 14.03.19, 16:49 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 65 Check in: 30.06.12 Reputation: 3 | Nikita_apt, on 100 "n2, in theory, should stand in three meters from the screen I would like to know for sure - because the screen is selected in width, not diagonally ... I did not mention - the screen is collapsible - and there is a 1k1 aspect ratio and therefore there will be a corresponding diagonal)) In general - the width you need to navigate ... |
Message#2315 14.03.19, 17:27 | |
HTC U 11 [online] Group: Friendssavagemessiahzine.com Messages 1821 Check in: 24.04.11 Reputation: 102 | Nikita_apt, from H2 to get about 100 ", the projector should be at a distance of about 2.6 meters to the screen, Think about it further .. He has a projection factor if I am not mistaken 1.2: 1, and 100" is 2.214 * 1.245. Post has been editeddako75 - 14.03.19, 17:28 -------------------- Samsung galaxyS i9000/SII 9100/N 8000 Note 10.1/Note 3 N900/Xiaomi mi5s/HTC U11/Xiaomi mi8 |
Message#2316 14.03.19, 18:16 | |
Novice [offline] Group: Active users Messages 40 Check in: 18.03.18 Reputation: 2 | |
Message#2317 14.03.19, 19:07 | |
Local [online] Group: Friendssavagemessiahzine.com Messages 164 Check in: 10.04.11 Reputation: 3 | [email protected], 16:49 I would like to know for sure - because the screen is selected in width, not diagonally ... I did not mention - the screen is collapsible - and there is a 1k1 aspect ratio and therefore there will be a corresponding diagonal)) In general - the width you need to navigate ... Now, calling the diagonal, imply that such a diagonal will be at a ratio of 16: 9, because This is the most popular movie format. |
Message#2318 14.03.19, 19:58 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2922 Check in: 05.09.10 Xiaomi Redmi Note 5 4/64 Reputation: 125 | [email protected], 16:49 I would like to know for sure - because the screen is selected in width, not diagonally ... I did not mention - the screen is collapsible - and there is a 1k1 aspect ratio and therefore there will be a corresponding diagonal)) In general - the width you need to navigate ... When you hang the projector in its place, or determine it where it will stand, turn it on to the intended location, measure and make the screen, and if you are going to buy ready, then 100 "you will be at this distance a little, 130" a lot and 120 " If the screen is purchased, then on the contrary, hang it and from this you will dance with the distance, so that the picture fits into the frame. -------------------- |
Message#2319 15.03.19, 09:00 | |
Local [online] Group: Friendssavagemessiahzine.com Messages 164 Check in: 10.04.11 Reputation: 3 | While the projector is going I want to buy a screen - or is it worth it to first put and project to the place where the screen will be? And estimate the size of the fact? Guys, check, pliz my calculations to determine the width of the screen - did I calculate everything correctly? There will be an Xgimi H2 projector. A factor of 1.2 has an Epson 5400 projector. We go to the site of Epson, chooseprojection calculatorthen select the 5400 projector, set the distance from the projector to the screen (2.6 m.) and find that from this distance the projector will display a picture (with a 16: 9 ratio) with a diagonal of 78 inches (1.73 m wide, 1.0) to 94 inches (width 2.08 m., Magnification 1.2). Simpler distance to the viewer can be calculated by multiplying the screen width by 1.5. Post has been editedVova Lermontovsky - 15.03.19, 09:00 |
Message#2320 15.03.19, 12:03 | |
a guest [offline] Group: Users Messages 2 Check in: 15.08.12 HTC Radar Reputation: 0 | Hello! Help is needed. I bought the Digis electra 4302 screen. His canvas is 174 * 129. And it turned out that the canvas is short, you have to bully your head. Has anyone solved this problem: can this cloth be replaced or lengthened somehow? |
Message#2321 15.03.19, 12:46 | |
NAAAAKAAAAAAASYACHU [offline] Group: Friendssavagemessiahzine.com Messages 3001 Check in: 13.02.12 Xiaomi Redmi Note 3 Pro Standard Reputation: 332 | |
mobile version | Now: 04/18/19, 15:40 |