[X]Assistant

[kirich46]

DiscussionPIPO X10
PIPO X10
Discussion пїЅ

• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
  
• Before posting photos, read the topic Working with Images on the forum
  
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
  

Specifications

System: Windows 10
Processor: Intel Cherry Trail Z8300
Graphics: IntelВ® HD Graphics (Eighth Generation)
Memory: 4GB RAM (DDR3L-1333) + 64GB ROM
Support: 802.11b / g / n WiFi 2.4GHz external antenna
Ethernet - 100Mbit
Bluetooth: BT 4.0
Audio output - 3.5mm audio jack
Screen: Built-in display 10.8 inches 1920x1280 + HDMI Output
External interfaces: 1x USB 3.0, 3x USB 2.0
Memory card support: 1 microSD max 64GB slot
Built-in battery 10000mAh
Built-in speakers.
Dimensions: 220 x 160 x 62 mm
Mass: 680gr

Additional Information:

Continuation of the line of desktop computers with built-in screen, launched from model X8, continued in model X9.
This device is a hybrid of a tablet and a TV box, it has a built-in screen with a resolution of 1920x1280 pixels and a diagonal of 10.8 inches.
Also, as an improvement, added the amount of RAM and flash memory to 4 and 64 GB, respectively.
But besides this, there is also a built-in battery capacity of 10,000 mAh, for use offline.

A photo

Purchase

Gearbest $195.37

Solving the USB dump problem

It helps not 100% of the time, but it helps -link. To work correctly, you need to disable the sleep mode and USB power saving.

Useful

Instructions for installing Android + Windows

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedvelikashkin - 25.04.18, 12:11

Reason for editing: Instructions for installing Android + Windows

[kirich46]

Profann @ 09/26/2016, 12:34

You can try to download Windows from their site and install it on a new one, even without all the updates.

I launched a full rollback of the system to its initial state, notified that my computer was recently updated to win10.
How it will roll back, I’ll write what’s what, but I think that the problem is not in the installed software, since the problem was not only with me, but also with the others and the manufacturer saw it. But everyone cannot have the same software (except for updates).

Post has been editedkirich46 - 26.09.16, 13:37

[profann]

.

[email protected], 13:35

How to roll back, I’ll write what's what ...

Download Windows from their site and install on a new one, without any updates.

[email protected], 13:35

... I think that the problem is not in the installed software ...

I think the problems are in Updates - drivers are updated in almost every Update.
It is not uncommon that updating them brings Problems ...
Drivers are NOT tested on all hardware produced in the world ...

[kirich46]

Profann @ 09/26/2016, 12:43

Download Windows from their site and install on a new one, without any updates.

Rollback from a hidden section of the manufacturer, what's the difference where to put it?
But in fact, I’m not doing it now as before.
In the first computers, they made a large section with the system image and the rollback took minutes, then they realized that the 32GB flash is terribly small for this and began to make an image of the disk with the OS, now it takes up less space, but the rollback takes hours.

Post has been editedkirich46 - 26.09.16, 13:48

[profann]

.

Kirich46 @ 09/26/2016, 13:45

Rollback from a hidden section of the manufacturer, what's the difference where to put it?

The devil knows if there are any updates made during the Update ...: rofl:

Download Windows from their website and install on a new one - it will be faster than through Recovery

Post has been editedprofann - 26.09.16, 13:50

[kirich46]

Profann @ 09/26/2016, 12:48

Download Windows from their website and install on a new one - it will be faster than through Recovery

It's not the same for everybody.

[profann]

.
kirich46,
I think it will be necessary to clean the topic a bit from our communication ...
... if not you are engaged in the topic, then through pr. A complaint.

[kirich46]

Profann @ 09/26/2016, 1:00 p.m.

I think it will be necessary to clean the topic a bit from our communication ...

I don’t know how. :(

I tried to roll back the wines, rolled back to its original state, the result is the same, after 5 minutes dump -
The last device connected to the computer does not work correctly and Windows cannot recognize it.

I haven’t set anything yet, I just drove in the language settings at the initial stage. I have not even connected to the network.

[profann]

.
kirich46,
probably the misfortune of a particular instance ...
Inside, you need to look, for iron, connectors, contacts ...

Kirich46 @ 09/26/2016, 16:59

I don’t know how.

Through the complaint, specify the links to the posts that need to be deleted - Modera will clear: yes2:

This Post is also "scrapped" ...

Kirich46 @ 09/26/2016, 16:59

I tried to roll back the wines, rolled back to its original state, ...

What version of Windows is now after Recovery?

Post has been editedprofann - 26.09.16, 17:13

[kirich46]

Profann @ 09/26/2016, 16:03

probably the misfortune of a particular instance ... Inside you need to look at the hardware, connectors, contacts ...

Well here again.
Is the hardware checked, or do you think that the connector doesn’t care what they stuck in it, a mouse or a flash drive? :)
Moreover, the hardware has been slightly modified.

In addition, I wrote, the manufacturer confirmed the problem, onitsdevice.

Profann @ 09/26/2016, 16:03

What version of Windows is now after Recovery?

Here, yes, the problem, Windows is already a new version.
But all the software is demolished.

Post has been editedkirich46 - 26.09.16, 17:19

[profann]

.

Kirich46 @ 09/26/2016, 17:18

Here, yes, the problem, Windows is already a new version.

And do not try to put you 8.1? : rolleyes:

Kirich46 @ 09/26/2016, 17:18

... I wrote, the manufacturer confirmed the problem on his device.

If not a secret, who exactly? Who did you contact with the question? Shop orhttp://www.pipo.cn

[kirich46]

Profann @ 09/26/2016, 16:28

If not a secret, who exactly? Who did you contact with the question? Shop orhttp://www.pipo.cn

The store manager, at my request, contacted the supplier, and there they confirmed the problem.

[xbrain]

Kirich46 @ 09/26/2016, 15:31

I can say so, but on the device manager
First issued - Unknown USB device (address failing)
If you connect / disconnect a device, then - Failed to request a USB device descriptor

Information to the manufacturer is gone, the manufacturer received it, looking for a solution.

The problem concerns devices included through the hub. Since USB 3.0 is directly enabled, it does not touch it. But if you connect and there hub, then the problem can happen again.
The problem does not apply to flash drives, moreover, a flash drive can work in a nearby port with a disabled mouse.
The problem does not concern the power supply (presumably), since the power is derived in parallel to all connectors.

From what I can conclude that the problem is software, so we are waiting for an update.

all right is true.
it turns out you have the same problem?
I bought this particular model in Susan's fashion Electronic Store (https://en.aliexpress.com/store/1919696)
and the second I'm waiting from ShenZhen Toper Electronic Co. Ltd (https://en.aliexpress.com/store/114281)

Kirich46 @ 09/26/2016, 20:59

I tried to roll back the wines, rolled back to its original state, the result is the same, after 5 minutes dump -
The last device connected to the computer does not work correctly and Windows cannot recognize it.

I haven’t set anything yet, I just drove in the language settings at the initial stage. I have not even connected to the network.

re-read my first posts))
I already did it

Profann @ 09/26/2016, 17:48

Download Windows from their website and install on a new one - it will be faster than through Recovery

re-read my first posts again, it takes a very long time to deflate
I can say offhand that the download speed is about 50 kb / s, and then drops to 10 kb / s and constantly breaks
total download time increases mom do not worry

Profann @ 09/26/2016, 9:03 p.m.

probably the misfortune of a particular instance ...
Inside, you need to look, for iron, connectors, contacts ...

read the first posts again,the problem is definitely not iron
becauseeverything works fine in any systems, but not in Windows 10
For example, this is the same BIOS
for example, in android everything is fine too

software problem and it is in 10-ke (so far I think)
for this reason I already want to try to install win 8.1, for example
anyway, the activation key disappeared and Windows now turned into a pirate pumpkin: rofl:

Post has been editedxbrain - 26.09.16, 18:06

[profann]

.

Xbrain @ 09/26/2016, 17:51

... re-read my first posts, it takes a very long time to pump out ...

I just did not understand one thing - why download from China, and not from the Microsoft website?
Download clean, without Updates and "pull up" the necessary drivers from Windows, if necessary.

Post has been editedprofann - 26.09.16, 18:28

[kirich46]

Xbrain @ 09/26/2016, 16:51

it turns out you have the same problem?

Yes, and it turns out that it is global in nature, i.e. not tied to the place of purchase, since I bought in herbst.

By the way, after reinstalling Vin, she activated herself, and not using the CCM activator, as it was in its original form.

Post has been editedkirich46 - 26.09.16, 19:00

[xbrain]

[email protected], 21:46

The store manager, at my request, contacted the supplier, and there they confirmed the problem.

I wonder where it will be possible to track if for example some kind of fix comes out
or for example, the manufacturer will solve the problem and report it?
I doubt that on off.sayte there will be info
what do you think?

[fableas]

Official firmware with baiduon Yandex

[xbrain]

I think it's worth putting this problem in a hat in order to warn everyone who wants to buy this device

Kirich46 @ 09/26/2016, 15:31

First issued - Unknown USB device (address failing)
If you connect / disconnect a device, then - Failed to request a USB device descriptor

Information to the manufacturer is gone, the manufacturer received it, looking for a solution.

The problem concerns devices included through the hub. Since USB 3.0 is directly enabled, it does not touch it. But if you connect and there hub, then the problem can happen again.
The problem does not apply to flash drives, moreover, a flash drive can work in a nearby port with a disabled mouse.
The problem does not concern the power supply (presumably), since the power is derived in parallel to all connectors.

From what I can conclude that the problem is software, so we are waiting for an update.

googled a little and found a similar problem dating back to May 2016
https: //social.technet...rum=win10itprohardware

those. This is a 10-problem and it seems like it has been known for a long time.
I do not think that this is a jamb of the manufacturer. therefore, the solution will be sought for a very long time (IMHO)


upset by the fact that I bought these devices specifically for working with USB (scales, pos-terminal, etc.)
ala cashier's workplace
but in fact I received not a working brick for entertainment such as "only a TV set-top box."
the trick failed but sorry

[xbrain]

[email protected], 11:41

Official firmware with a canoe on Yandex

thank.

[kirich46]

[email protected], 06:22

I wonder where it will be possible to track if for example some kind of fix comes out

Most likely I will write in this thread.

[email protected], 06:55

those. This is a 10-problem and it seems like it has been known for a long time.

There was somehow a problem with Win8, where the external hard drive went into sleep mode and it was impossible to block it.
I hope that they will fix it here, in other computers it works on the same hardware.

[email protected], 06:55

saddened by the fact that I bought these devices specifically for working with USB (scales, pos-terminal, etc.) ala cashier’s workplace

My task is approximately similar, but instead of weights, small machines.
By the way, you need to check how it works with the USB-RS232 converter.

[burnfear]

Comrades, how to make Pipa go into Sleep and turn off the fan?