[X]Assistant

[kirich46]

DiscussionPIPO X10
PIPO X10
Discussion пїЅ

• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
  
• Before posting photos, read the topic Working with Images on the forum
  
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
  

Specifications

System: Windows 10
Processor: Intel Cherry Trail Z8300
Graphics: IntelВ® HD Graphics (Eighth Generation)
Memory: 4GB RAM (DDR3L-1333) + 64GB ROM
Support: 802.11b / g / n WiFi 2.4GHz external antenna
Ethernet - 100Mbit
Bluetooth: BT 4.0
Audio output - 3.5mm audio jack
Screen: Built-in display 10.8 inches 1920x1280 + HDMI Output
External interfaces: 1x USB 3.0, 3x USB 2.0
Memory card support: 1 microSD max 64GB slot
Built-in battery 10000mAh
Built-in speakers.
Dimensions: 220 x 160 x 62 mm
Mass: 680gr

Additional Information:

Continuation of the line of desktop computers with built-in screen, launched from model X8, continued in model X9.
This device is a hybrid of a tablet and a TV box, it has a built-in screen with a resolution of 1920x1280 pixels and a diagonal of 10.8 inches.
Also, as an improvement, added the amount of RAM and flash memory to 4 and 64 GB, respectively.
But besides this, there is also a built-in battery capacity of 10,000 mAh, for use offline.

A photo

Purchase

Gearbest $195.37

Solving the USB dump problem

It helps not 100% of the time, but it helps -link. To work correctly, you need to disable the sleep mode and USB power saving.

Useful

Instructions for installing Android + Windows

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedvelikashkin - 25.04.18, 12:11

Reason for editing: Instructions for installing Android + Windows

[profann]

[email protected], 17:53

... by the way, these items are the same ...

Did you do that? -How to reset Windows 10

[email protected], 17:53

... when activated, they offer me: change the product key ...

Key of Vind in BIOS ...

[kirich46]

[email protected], 14:20

I ask you to put official firewood in a hat

Added a link to the comment.

[email protected], 17:24

Key of Vind in BIOS ...

Alas. It is an activator.
Apparently depends on the time of release of the box. It is possible that I have a test version of the first, it happens.

Post has been editedkirich46 - 25.09.16, 18:59

[xbrain]

Profann 09/25/2016, 10:24 PM

Did you do that? - How to reset Windows 10

Yes. exactly
Now I try the second method, the specified video, but I think the key will not recover from this))
because:

Profann 09/25/2016, 10:24 PM

Key of Vind in BIOS ...

Alas, but I think that the key is not there, because Chinese bios supplied with firewood and there is no activation key
apparently it was necessary to rewrite his pens
Now I am inclined to think

[email protected], 22:31

Alas. It is an activator

[kirich46]

[email protected], 19:43

Now I am inclined to think

As I wrote above, it happens on the first batch of devices, I already came across, here is the same garbage.
I am almost sure that in a short time they will sell with an already normally activated Windows.

[2013]

Could you check if Fallout 4 will pull? On my laptop with GF330M and 4GB RAM, the game is slow.

[xbrain]

new details have surfaced regarding usb2.0 dump

it turns out the ports fall off, but not quite tightly.
flash drives continue to work (including read and write)
But the devices do not work, it is written that it is unidentified
food does not go anywhere, i.e. if it was a keyboard, then the lights on it continue to burn, but the keyboard itself does not react to anything

and the frequency of the "blade" is different,
for example after loading Windows, after five seconds the mouse falls off, after 30 minutes the keyboard falls off
and after 1 minute the network
device sequence doesn't matter

as I understood, in Windows "device" falls off, but not port. although then this same “device” does not work when switched to another port
only if rebooting or juggling the "root hub" in the dispatcher helps


I'm at a loss what to do

I'm waiting for another piposhka to come to me (I bought from different vendors)
I can compare the BIOS settings or something else, maybe I have a “build” of Windows. although even updating does not help

if anyone is not lazy, show the BIOS settings. preferably all items. well or nakraynyak associated with USB and power

Post has been editedxbrain - 26.09.16, 08:54

[kirich46]

xbrain @ 09/26/2016, 07:47

I'm waiting for another piposhka to come to me (I bought from different vendors)

And where was this bought?

[profann]

.
xbrain,
Look at what you have in the Journal (by the time of the USB event / dump):
Start ->Programs ->Windows Administration Tools ->Event Viewer ->Windows logs

[kirich46]

Profann 09/26/2016, 10:13

Look at what you have in the Journal (by the time of the event / USB dump): Start ->Programs ->Windows Administration Tools ->Event Viewer ->Windows logs

I can say so, but on the device manager
First issued - Unknown USB device (address failing)
If you connect / disconnect a device, then - Failed to request a USB device descriptor

Information to the manufacturer is gone, the manufacturer received it, looking for a solution.

The problem concerns devices included through the hub. Since USB 3.0 is directly enabled, it does not touch it. But if you connect and there hub, then the problem can happen again.
The problem does not apply to flash drives, moreover, a flash drive can work in a nearby port with a disabled mouse.
The problem does not concern the power supply (presumably), since the power is derived in parallel to all connectors.

From what I can conclude that the problem is software, so we are waiting for an update.

Post has been editedkirich46 - 26.09.16, 11:33

[profann]

.

Kirich46 @ 09/26/2016, 11:31

I can say so, but on the device manager ...

The magazine "will give more meaningful" information ...
... it is her that should be "sent."
But to whom? Melkosoftovym, probably ...

[kirich46]

profann @ 09/26/2016, 10:38

But to whom? Melkosoftovym, probably ...

In general, PIPO makes pretty good devices, about the X7 and X9, I have only the most positive impressions (not counting overheating).
In addition, the manufacturer acknowledged the problem.

Now I will try and say what the system writes. The fact is that yesterday came a global update and all the entries in the journal flew to zero.

I connected the mouse, disconnected after a few minutes (although usually it takes more time, but the battery was discharged to zero), in the silence log.

Post has been editedkirich46 - 26.09.16, 11:54

[profann]

.

Kirich46 @ 09/26/2016, 11:48

The fact is that yesterday came a global update ...

Yes, I flew - 10.0.14393 and "killed" my Classic Shell ...: girl_cray:

kirich46,
You can still look in the "Journal of Stability"
Control Panel ->Safety and maintenance ->Service ->Show job stability log
... short "call way": Start ->in the search to type "reliability" (without quotes)
You can see - which program or update was installed, after which fails began.
Or are you having problems with USB from the start?

Post has been editedprofann - 26.09.16, 12:46

[kirich46]

profann @ 09/26/2016, 11:40

Control Panel ->Safety and maintenance ->Service ->Show operation stability log ... short "call path": Start ->in the search to type "reliability" (without quotes)

Silence, only the results of the automatic reinstallation of drivers after the update.

Posted on 09/26/2016, 12:54:

profann @ 09/26/2016, 11:40

You can see - which program or update was installed, after which fails began. Or did you have problems with USB from the very beginning?

And here it is not clear.
At first I was "played" with the computer, the mouse and external keyboard were connected, everything was fine. I didn’t notice the time, but it seems to me that the whole evening I put all kinds of programs, mainly for tests (crystal mark, HWinfo, 3dmark, etc.)
Then, a day later, I started poking around again, but at the time I left it behind, leaving the computer on, I hear that there are notifications - the last connected device is disconnected (something like that) due to problems.
After that, it began.

[fableas]

Owners of pipa x10, please see the value of the capacitor. I have a pip x9s, but almost the same 10

Native burned out after power reversal

Post has been editedfableas - 26.09.16, 12:57

[profann]

.

Kirich46 @ 09/26/2016, 12:51

At first I was “played” with the computer, the mouse and external keyboard were connected, everything was fine ...
... I hear that there are notifications - the last connected device is disconnected (something like that) due to problems.
After that, it began.

Most likely, somenew updatesomething that caused problems.
This is where the "Work Stability Journal" would show - after which you started having problems ...

Kirich46 @ 09/26/2016, 12:51

... put all kinds of programs, mostly for tests ...

It seems to me that it is better to use something that does not "foul up" the system - Portable Software.

Post has been editedprofann - 26.09.16, 13:08

[kirich46]

Fableas @ 09/26/2016, 11:56

Owners of pipa x10, please see the value of the capacitor. I have a pip x9s, but almost the same 10

100 microfarad.

Posted on 09/26/2016, 1:16 PM:

Profann 09/26/2016, 12:04

This is where the "Work Stability Journal" would show - after which you started having problems ...

So I created the problem after the update. should have been reflected in the magazine.

Profann 09/26/2016, 12:04

It seems to me that it is better to use something that does not "foul up" the system - Portable Software.

I always use the same software, I checked more than a dozen different small computers (on the buy trail and cherry trail and with the same USB 2.0 hub), but I see this problem for the first time.

Attached images

[fableas]

Profann 09/26/2016, 2:04 PM

Most likely, some kind of new update of something and caused problems.
This is where the "Work Stability Journal" would show - after which you started having problems ...

Problems with dumps flash drives and there are 1511, could occur after 5 minutes or 3 hours. On the usb3.0 port, stable operation of an external sound card, 3 months as a music center (on pipo x9s)

[profann]

.

Kirich46 @ 09/26/2016, 1:13 PM

So I created the problem after the update. should have been reflected in the magazine.

Update - blue dot, Problem is red. What blue dot in front of the red - and that caused ...

[kirich46]

profann @ 09/26/2016, 12:26

What blue dot in front of the red - and that caused ...

Well, for this red is needed, but it is not.

[profann]

.

Kirich46 @ 09/26/2016, 1:29 PM

Well, for this red is needed, but it is not.

Yes, after the new update (yesterday / today) everything is deleted - no longer look ...
... had to look before.

You can try to download Windows from their site and install it on a new one, even without all the updates.