Assistant
| REPLY |
 Xiaomi Redmi Note 4 MTK - MIUI Firmware |
Message#1  09.09.16, 10:05 | |
Guru  [offline] Group: Honorary Gameday Messages 3001 Check in: 12.05.14 Xiaomi Mi Note 3 6/128 Reputation:  1875  | Xiaomi Redmi Note 4 MTK - MIUI Firmware  Codename: Nikel. Models:2016050, 2016051, MBE6A5, MBT6A5. Abbr. name: RN4, HMNote4Description | Discussion � | Purchase � | Accessories � | Marriage and Repair � | Modems and communication � | Power consumption (autonomy) � | Modification and decorations � | Mi Account � | Unlock bootloaders Xiaomi � | Unofficial firmware � | Camera talk � | MIUI firmware � Important information!
Drivers and Utilities
Official firmware Official download pageH mui.com | en.miui.com | www.miui.com | Instructions. Unofficial downloads pagehttps://mirom.ezbox.idv.tw/en/phone/nikel/ The release of developer firmware for Redmi Note 4 MTK is officially discontinued. A source:ru.c.mi.com | c.mi.com | www.miui.com. Firmware Archive. International Stable - Global Stable Recovery- for installation from Recovery it is also "three points", TWRP; Fastboot- to install from the SP Flash Tool / MiFlash and in Fastboot mode (hare).
International Beta - Global Developer Suitable for unlocking the bootloader. Root is NOT built into the firmware. Recovery- for installation from Recovery it is also "three points", TWRP; Fastboot- to install from the SP Flash Tool / MiFlash and in Fastboot mode (hare).
Anglo-Chinese stable - China Stable English-Chinese beta - China Developer Suitable for unlocking the bootloader. Root is built into the firmware.How to activate the root in pictures. Recovery- for installation from Recovery it is also "three points", TWRP; Fastboot- to install from the SP Flash Tool / MiFlash and in Fastboot mode (hare). Localized firmware ❗ Attention!All firmware below are installed only from TWRP Recovery. When lowering the version before the firmware, do Wipe Data. Firmware Archive.
Recovery, Root, Modems, Kernel How to get root access or install TWRP recovery? Root and TWRP is installed only after unlocking the bootloader (unlock bootloader). Question: Is it possible somehow simpler without these problems? Answer: No, it is impossible. First unlock the bootloader, then TWRP and Root. There are no other ways! All questions about unlocking should be asked in a special topic.Unlock bootloaders Xiaomi. Here in the firmware, such questions are offtopic and are deleted without warning. After unlocking the bootloader, installing TWRP and Root takes 5-10 minutes.
Instructions Disabling unused frequencies / ranges in an engineer can lead to IMEI / modem dump!Not at all, but there were precedents. Repair IMEI below. Device firmware&
Backup, BackUp Block addressnvram: linear_start_addr: 0xab00000; partition_size: 0x500000. These valuestake from scatter.txt
Recovery, Root, ModemA
Drivers&
Recovery, Test, SetupD
Bootloop cyclic rebootX In the case of a bootlap and a cyclic reboot (which is identical), throw off the cable from the battery for 10 minutes. Most likely the problem is in the battery power controller. This problem is not uncommon on modifications with 4/64 GB memory, less often on 3/64, etc. It is better to immediately go to the store / service and replace the battery or phone.
Sensor Calibration / Sensor Setup✱ If the region and time zone flies# All instructions need Root access.
NVRAM WARNING error correction: Err = 0x10R
Mi account device search / activation bypass- Unlink a Mi-account officially. There are 2 types of locks:
In firmware up to version 8.0.4.0 inclusive, you can freeze Mi-services. Further - only with them.
Bluetooth Bluetooth troubleshooting
Video instructionsY
miscellanea All about MIUI versionsA guide for beginners. Are commonrecommendationsfirmware upgrade. Best firmware. We decrypt the name of the archive. ? MIUI 9 complete changelog- English Archive Caps. Related Topics Navigator Discussion topics MIUI 8 | Catalog of the MIUI v6 / v7 / v8 | MIUI - Modification and decorations �� | Owners Club��� | Benchmark - results���
Update caps Update archive Caps April
March
January
November
October
September
August
July
Topics Curator:D_Godunov Post has been editedD_Godunov - 06.04.19, 00:57 Reason for editing: The release of developer firmware for Redmi Note 4 MTK is officially discontinued. Dev 9.3.21. Collection of firmware MIUIPro from barabulko. |
Message#2 07.09.16, 03:06 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1131 Check in: 03.11.11 Oneplus 6T 6/128 Reputation: 264 | So, here is the experience of installing custom firmware via TWRP. Instructions for firmware with unlocked bootloader via TWRP 1. Unlock the bootloader. Here isthemeentirely dedicated to this process. 2. Install and unpack ADB-fastboot (for example,from here). 3. Download one of TWRP from the header, put it in the folder with ADB and rename it to recovery.img. 4. We transfer the device to fastboot mode. To do this, turn off the phone and simultaneously hold down the "Volume -" and "Power" buttons until a hare repairing the robot appears. 5. Check the fastboot connection. Open the folder with ADB-fastboot. Hold Shift and at the same time right-click on a blank place in the folder, select "Open command window". To test the connection, enter the command fastboot devices In the command window should determine the number of your device. 6. Next, either install the TWRP command fastboot flash recovery recovery.img , or boot into TWRP without installing it with the command fastboot boot recovery.img 7. After downloading TWRP in some versions on the initial screen, you should select English (initially all in Chinese) by clicking on the one of the two gray rectangles with hieroglyphs on the right. 8. I tried 3 versions of TWRP, and in all the data section was encrypted. Therefore, you will have to format it - it will delete all your data. Wipe>Format Data>write yes in the input box>blue button to confirm. 9. Mount data: go to the main menu>Mount>tick on data. 10. Full wipe: go to the main menu>Wipe>Advanced wipe>checkmarks Dalvic, Cache, System, Data, Internal Storage. Warning: this will delete all data in the phone. 11. Download the necessary custom firmware for recovery in the phone. Links in the header. In TWRP mode, we connect the cable to the PC and drop the necessary archive with the firmware into the phone. 12. Installing the firmware: go to the main menu>Install>Select the archive with the firmware. 13. After reporting successful firmware, the cache and dalvic wipe. 14. Reboot system. We are waiting for download and use. As new versions of TWRP and firmware appear, as well as your comments in QMS, I will try to supplement the instructions.  Post has been editedD_Godunov - 21.10.16, 15:25 Reason for editing: raised in the topic header |
Message#3 09.09.16, 10:05 | |
Ebony merchant [offline] Topics Curator Group: Curators Messages 2715 Check in: 09.04.16 Reputation: 1192 | FAQ - Redmi Note 4 MTK (compilation) 1. For those who have just received a phone or are waiting for it. 1.1I bought a phone, how to understand my firmware and will there be updates over the air (OTA - over-the-air)?
1.2I ordered a phone, what should I do before I get it? - First, create a Mi-account, if one is not available. Next, it is advisable to apply for unlocking the bootloader, so you do not have to wait. Permission is not given to the phone (you may not have it), but to the Mi-account, from which you can unlock more than one phone. Agree that it is better to already have approval on unlock, than to wait for it when it is needed. More in topicUnlocking XIAOMI loaders through the company's official website 1.3I got a phone, what should I do first? a) - Test the phone using the built-in test, the sensors are calibrated here. Prepare headphones, an SD card and a SIM card, which you will need to pass the test successfully. To enter QC Test (quality control test) in the dialer dial * # * # 6484 # * # *. b) - Next, reset the system to factory settings: Settings>Additional settings>Backup and reset>Reset settings (with clearing the internal memory). Do this, regardless of whether the firmware is right or left. Chances are that the Chinese will install an "enhancer" for you. If after rebooting, the phone goes into the bootlap, IMEI flies or there are system errors - open a dispute with the seller / return the money / change the phone. If after rebooting with the device everything is in order, proceed to setting up the phone for you. 1.4How is the firmware version number generated? - Short:Stable / Globalv7.x.x.x = MIUI 7, v8.x.x.x = MIUI 8.Developer6.8.25 = Year.Month.Number In detail Version numbers are formed from a block of 4 digits (numbers) separated by a dot and 7 LETTERS. Nomenclature MIUI 8 next V8.X.X.0 XXXXXXXWhere: The 1st digit is the UI number (English User Interfase - user interface) MIUI 8; the next two are X.X. This is the version number of the firmware, A block of seven letters (XXXXXXX) shows the version of Android, device code, region code and localization. For example: MBFMIDG
• Global Stable (Stable, international) - produced in parallel with Stable, contains all the same + language packs, including Russian and Ukrainian, + GoogleApps, and there is also no Xunlei download accelerator. • Weekly (Weekly, developer) - on the release date read below. • Daily (Daily) - about the release date read below, available only (!!!) to developers and beta testers, how to join a group of beta testers read on the official English website, usually a set of beta testers is done by creating a topic in the group Beta Team. Weekly and Daily version numbers are formed from a block of 3 digits (numbers) based on the release date of the release. For example 6.9.29 (MIUI8), where: The 1st digit is the last digit of the current year. 2016> 6; The 2nd digit is the month (1–12). September> 9; 3rd digit is the day of the month when the firmware is released (will be released)> 29. The firmware, with rare exceptions (the new year according to the eastern calendar, national holidays in China, etc.), is released / updated every Friday (Daily daily from Tuesday to Friday), so everyone can easily calculate what number the next release will wear . 1.5What is the boot loader unlock for? To install custom recovery / firmware / add-ons / mods. Custom recovery allows you to quickly install and reinstall the system, as well as to create and subsequently restore backups, install various patches and add-ons that add new features. More in topicUnlocking XIAOMI loaders through the company's official website 1.6When unblocking via en.miui.com/unlock gives an error of 50%. - In practice, unlocking can be done on the Stable version (why is a separate topic). If you get a 50% error, try unlocking on the Developer version. - You must log in to your account on your phone and with the same account in the MiUnlock program. - Poor communication with Xiaomi servers due to their high load. Try to “reach out” on another day. - Frequentunlock errors and solutions. 1.7Are there any gapps in the official firmware (google apps apps google)? - In the international Global Stable - there is. - In the Anglo-Chinese Stable - no. Subject to the policies of the Chinese Government, Xiaomi does not include Google Apps in the stock firmware. You can install gapps yourself from thisTopicsor usealternative. 1.8Will the V8.0.3.0 to V8.0.4.0 update by air (OTA)? - Updates of global firmwares come only to global ones, i.e. in this case, the answer is yes: updated. At the moment there are 4 types of firmware:
1.9What can be updated through the standard Update application (Updater, also known as "three points")? - Only in this order and only upgrading the version, after downloading the firmware to the device and enabling Internet access:
At the end of May, a warning appeared on the office:transition from stable to developer only in Fastboot mode and with full data cleaning. Backup before flashing. (original: From Stable ROM to Developer ROM, use the Fastboot method ONLY. Always back up your data before flashing your device.) Deprecated, does not work in MIUI 8
1.10Notifications do not come from applications - This is a feature of MIUI and Android 6 Marshmallow. It is necessary to give permission to each application for certain actions.Instructions for activating notificationsorhereandadditionone more thingaddition. All applications from which you need notifications and the background is desirable not to restore from backups. For example, Skype and VibER do not work when restoring, when reinstalling on a new one - they work. After restoring from the backup, the old and already invalid RegistrationId by which Google Cloud Messaging (GCM) finds your device is restored. 1.11Do I need to unlock the bootloader for firmware via MiFlash? - Yes, you need to unlock the bootloader. Otherwise, the firmware will be interrupted by an error. 1.12How do I know if the bootloader is locked? - In the dialer * # * # 6484 # * # * or Settings>About the device>According to the kernel version (Kernel), tap until it enters the menu>Software version>Looking for fastboot lock state. lock - locked; unlock - unlockedpicture. 1.13I successfully flashed MiFlash without unlocking onsuch a device from Xiaomi with Qualcomm chipset. Why is everyone talking about unlocking the bootloader? - The difference lies in the chips. There is an EDL mode on the terminal, which 1.14If you update the firmware via the built-in update, then everything will be removed? - If you update from Stable to Stable, your data will remain untouched. If you update Stable<->Developer, your data will be deleted. 1.15Is it possible to immediately flash from 8.0.3.0 to 8.1.2.0, i.e. jump over the version? - Yes, you can. It is not necessary to put all versions in sequence, you can jump. This also applies to stable and developer versions. 1.16Today I took Note 4, I decided to unlock the bootloader, but it was already unlocked. How so? - That's how! The seller (former owner) has already unlocked. Most likely to roll custom firmware. Rejoice, some spend a lot of effort on the quest on the unlock. When buying a used / have, make sure that the phone is unbound from the Mi-account and device search is disabled. 1.17How to safely remove the phone from the PC? In connected devices, it is not displayed. Is this a glitch? - No glitch, on the latest versions of Windows, the phone does not appear in the notification area (tray). According to the MTP technology, there is no exclusive capture of the management of the phone’s memory section by the computer’s operating system, so the drive letter is not assigned to the phone. Data transfer is based on the principle "a command is received - the device independently executes the command". Since the drive letter is not assigned and exclusive access is not granted, you do not need to disconnect anything before disconnecting the phone. But for safety net, before disconnecting, you can translate tel. in the "Charging" mode if it was in the "MTP" mode.Instructions for changing the MTP driver in Windows 10+ Install MTP in Windows XP. 2. Select firmware 2.1What firmware to choose, stable (Stable) developer (Developer) or localized? - Localized firmware based on the official firmware MIUI. Of There are two types of firmware - Stable / Global and Weekly Developer. Weekly firmware is a beta version of the stable. If you like to run ahead of the locomotive and want to constantly receive updates with new buns, then weekly is for you. If you need a stable job without jambs, then the stabilizer or globalka fits perfectly. Page withofficial firmware. Stable Updated every 1-2 months. Minor updates come once 1-2 weeks and contain bug fixes for major releases. Contain all the innovations of weekly developer firmware a month ago. Developer Come out every week on Friday. They contain the newest features and functions that will appear (or will not appear) on stable firmware only in time. May contain bugs and bugs, as this is a beta version. 2.2What applications can and can not be removed in the firmware? Answershereandhere 2.3How to determine which version I have, stable or weekly? - Go to settings>On the device and look at the version of MIUI (not to be confused with the version of Android), if 6.x.x or 7.x.x, then you have a weekly (developer) version, and if 8.x.x.x, then stable. 2.4How do I know whose firmware build I have? - Go to settings>About the device. The name of the team that collected the firmware is written in the "MIUI Version" field. In the firmware Multirom there is a capital letter M in the MIUI version. If you have a root, thenthere is another way. 2.5What is the difference between localized firmware? - Differences between localized firmware from MultiROM, Xiaomi.eu, etc.detail here 2.6What is the best firmware? - Answer here 2.7Can I flash on 32-bit Windows? - Yes you can. MiFlash and SP Flash Tool utilities for flashing work on both 32-bit and 64-bit MS Windows. General recommendations: you should have at least 6 GB of free space on your hard drive (you cannot say exactly how much, but the more the higher the chance of success). The paging file (swap-file / paging-file) should not be lower than the recommended one, but for accuracy, it is better to set the maximum value. 2.13Can I flash on Mac OS X? - Yes, you caninstructionand on siteen.miui.com in Englishwithout using MiFlash. 2.18What are wipes, what are they for and how to do them? Xiaomi Redmi Note 3 - MIUI Firmware (OS 5.0.2) 2.19What you need to do before the firmware / backup? - Remove the password lock. After recovery, the system may not accept it. - Backup all sections. - It is advisable to untie the mi account from the phone. 2.21Can I flash MultiRom via SP Flash Tool? - No, it is impossible (unless specifically assembled under FT). Custom firmware is stitched through moderation, in our case it is TWRP Recovery. 2.22Is it possible to flash the official firmware via TWRP? - Yes you can. Use the firmware for Recovery, archive with the extension.zip . 2.27How to downgrade the firmware version? - It is necessary to lower with a wipe (wipe) section Data. In the stock recovery, this will not work, so you need to sew from FlashTool or Miflash with all the daws. But as an experiment you can try to lower Vers. firmware through the "three points". 3. Bugs / Errors 3.1After updating by air, it has been hanging on the black screen with the Mi logo for more than an hour. - The phone is updated, wait. Although usually the first download is within 20 minutes. 3.2I can not get through - Turn off VoLTE. 3.3The name and photo of the caller is not displayed when calling. - This is a MIUI bug, which is also present on other phones. Unambiguous solutions yet. General recommendations: - It is necessary to write numbers not with 8, but with +7. In order not to rewrite all contacts, you can use the 8to + 7 program. - There should be no duplicate contacts. - Contacts must be recorded in the phone's memory (not on the SIM card). - Play around with disabling the MIUI Optimization in the For Developers section. 3.4Sberbank application online swears on the root of the law - You can prevent the application to run some servicesinstruction set. You can hide the root of the law4 ®Magisk - The Universal Systemless Interface | XDA. 3.5Bluetooth issues - Problems manifest on many firmware - both official and localized. At the moment, as such, there is no solution, it remains to hope that the developers will fix the work of bluetooth. Description of some possible problems here.Xiaomi Redmi Note 3 - MIUI Firmware (OS 5.0.2). 3.6When dialing a number, it does not search for contacts by the first letters. - In official firmware this function does not work. You can install a third-party dialer. In the firmware Multir works by default. 3.7The fingerprint scanner does not work. - Most likely, you have not enabled unlocking the phone with a password. 3.8After rebooting, the phone does not accept a fingerprint. - This is normal. The first time you turn on, you need to enter a password or pattern, depending on what you used when entering the fingerprint. 3.9I can not remove the fingerprint, the settings go off. - Such an error often occurs on translated firmware. Change the system language to English (Settings>Additionally>Language and input>Language), then change / add / delete fingerprints, return the system language back to Russian. 3.10The proximity sensor does not work when talking on the phone. - Settings>System applications>Phone>Incoming calls>Proximity sensor. 3.11When flashing in MiFlash, I get an errorcan not read from port com x. - In the Settings in the menu for developers, remove the permission to unlock the bootloader. This error occurs when switching from self-made firmware to stock. 3.12When you connect a USB cable, the computer does not see the phone. In MTP Device Manager with an exclamation point. - In the device manager, manually change the device driver, which is automatically detected, as the MTP-Device to the USB MTP device. 3.13What should I do to make your tunes appear in the list with factory ringtones? 1. Put them in the internal memory in the MIUI / ringtone directory. If you do not have a ringtone folder, just create it. 2. Need a root. If the 1st method does not help, then place the media file .mp3 or .ogg on the path / system / media / audio / ringtones and set the permissions 0644 (the letter "G"). Reboot your smartphone. Third-party ringtone will be system and you will see it in the Themes Manager. 3.15BROM ERROR: STATUS_SEC_IMG_TOO_LARGE (0xC0020005) Error from the SP Flash Tool. - If you get the status_sec_img_too_large (0xC0020005) error, then replace cust.img from the firmware with one of the files:
- See above this FAQ section 1.3.a. 3.17The phone hangs on the Mi-logo. How to turn it off? - Turns off by long (seconds 20) holding the On key. If it does not help, hold down the 3 keys - i.e. both Volume and Power On. 3.18NVRAM WARNING: Err = 0x10. What is it and how to cure it? - There ispatchor fixed with Mediatek SN WriterTheme on offsiteif not helpstill subject on ofsayteand look at the topicNVRAM WARNING: Err = 0x10 onsavagemessiahzine.com. 3.20How to open an external SD card for recording for applications? - It is necessary to enable the application "Documents", by default it is disabled, Settings ->Installed applications. Then open the app that needs access to the card. When the application says that it needs permissions, a window will open where you can select a memory card. Applications in the 6th Android themselves must make a request to write in the appeared window with permission confirmation. If this does not happen, then the application does not support the 6th Android. Correspondingly adjust to work with internal memory. The flash drive will remain read only for this application. there isfix, but there have been no reviews yet, so at your own risk. 3.21Unload applications from memory. Why? Service application (Security) - Battery - gear in the upper right corner - Clear memory after device lock. You can choose from "After 1 min." before "Never." 3.22How to send a bug report to Xiaomi developers? Answer inthis message. 3.23In the settings there is a point with the choice of the font, but there’s nothing but the default one. How to make a font selection appear? - Fonts in different firmware and in different localizers may be in different places: 1. Settings - Screen - Font. 2. Application "Themes" in the top row. 3. In the application "Themes" - My account - Resources. Check at all these addresses. If not, then a third-party program. - Font selection can be done on any MIUI without Root rights by using the QuickShortcutMaker program. We find Settings, there we find the Font, we make a shortcut, in more detail inFont replacement for Stable ROM Global. - There is a topic onsavagemessiahzine.comInstalling fonts via .apk And on XDA, for exampleforum.xda-developers.com. 3.24It was 8.1.7.0 rolled back to 8.0.4.0. Steel bugs popping up, what to do? - Reset to factory settings. All data will be lost. 3.25Themes application disappeared, where to dig? - Most likely you changed the region in the settings. Set the region (not the time zone) Russia and the Themes icon will appear. 3.26The version of the firmware in Settings has stopped>About the phone. So it should be, or am I nakhimichil something? - You may have edited the build.prop file with the ro.build.type parameter. If edited, then return its value to default: ro.build.type = user. - Also, after editing the ro.build.type parameter, Developer Development starts to arrive at the Stable firmware, keep in mind. Conversely, if you want to upgrade through the "three points" from Stable to Developer without losing data, change the valuero.build.type = user on ro.build.type = userdebug and restart the phone. But keep in mind, in this case, unstable applications can work, because The transition from Stable to Developer, still needs to be done with the data section wipe. 3.27After the upgrade, it does not see the internal memory. - Install SuperSU from TWRP Recovery. If the root is not needed later, you can remove SuperSU using standard tools from the SuperSU settings. - Another radical way: in TWRP, execute Format Data, respectively, all data will be deleted. - Another option: flash the official MIUI firmware from SP Flashtool. 3.28What kind of "application bug KLO Bugreport"? - KLO Bugreport is a standard Xiaomi application for sending errors when programs crash. The error most often occurs when the device is unable to contact the server for data transfer. Solving the problem onhttps://windowsten.ru/chto-takoe-klo-bugreport/and, having root-access, you can freeze or delete the KLO Bugreport application. 3.29The phone began to load for a long time, 10-20 minutes. - Check download without SD card and no SIM card just in case. Did not help? Install the firmware from scratch without any mods. Did not help? Carry in the workshop / change the battery, because This is most likely a problem at the iron level. 4. Fastboot, Recovery, Root, Boot Loader, Updates, Backup 4.1How to enter Fastboot mode? - Turn off the phone. While holding the volume rocker down (VOL-), hold down the Power button. The screen with a hare in a hatchet, fixing the robot will load. You are in Fastboot mode. 4.2How to enter Recovery mode? - 1. Turn off the phone. While holding the volume rocker up (VOL +), hold down the Power button. - 2. Settings - About the device - Update - three points in the rights. top. corner - Restart in Recovery. The contour of the phone on a black background is the native recovery stub, nothing can be done in it. In some developer versions, you can already find a normal recovery in which you can do something. 4.3How to make Wipe on a locked bootloader? - Settings - Advanced - Reset settings. 4.4Can I lock the bootloader again? - You can, but in no case try to do it on custom firmware. You can block the bootloader only on the stock firmware without changes, otherwise the blocking result will be a brick. Backup your important data! To lock the bootloader (lock bootloader) in fastboot mode, run the following command: fastboot oem lock to find out the status of the bootloader: fastboot getvar all :: look at the unlocked parameter. no = blocked; yes = unlocked to return from fastboot to normal mode: fastboot reboot 4.5How to get root (root)? - Ruth is obtained from TWRP by installing SuperSU. Install TWRP only afterbootloader unlocking (bootloader). No other way! 4.6Which firmware is root? - Ruth is in the stock China Developer firmware, as well as some localizers. 4.7Do I need to apply to unlock another phone? - No no need. Approval is given to account. From this account you can unlock the bootloader on an unlimited number of phones. But there is a time limit - once a calendar month. If you block the bootloader again with your actions, then in this case you can unlock every minute. The bootloader status record on xiaomi servers will remain the same, i.e. bootloader unlocked. 4.8Will the OTA fly to the unlocked bootloader? - Yes, they will. 4.9On the unlocked bootloader with custom recovery and root will OTA fly in? - Depends on custom / modified recovery, as well as on OTA itself. In the latest versions of moderation, OTA-updates arrive. Root usually flies, the moderation can remain. Route is only in China Dev, so it is overwritten on those firmware, where it is not there initially. Install the root again the case of 2 minutes. Worried about it is not worth it. 4.10How to get a link to update the full version of the firmware on the Xiaomi server, if available via OTA, but not posted on the download page? - The OTA firmware is downloaded to the downloaded_rom directory. Take a screenshot of the contents of this folder and publish it on the forum, experienced "security officers" will do the rest of the work. Read morehere. 4.11How to disable notifications about new firmware versions? - Disable "MIUI Optimization" in the settings for Developers. H.Kucher2000 shared by others in ways . 4.12Is it possible to remove custom recovery and flash stock recovery? - Yes, you can. Take the recovery from the stock firmware and transfer the phone to the fastboot execute the command fastboot flash recovery recovery.img 4.13Multiram supports OTA? See question 6.5. 4.14How to improve the mobile Internet and fix various friezes in its work? - For exampleXiaomi Redmi Note 3 4.15MiPCSuite he MiPhone Manager does not see the phone. Why? - Unfortunately, this is normal. Mi PC Suite does not work with Android 6. Upd: Support for Mi PC Suite has been discontinued. 4.16How to enter EDL mode? - No, this mode is not on devices with MediaTek chips. 4.17How to transfer a game / application to a microSD memory card? - In Redmi Note 4 by regular means it is impossible to transfer applications. For transfer, you can use the program® Link2SD. With its help, after the transfer, you can freeze system applications or GoogleApps. For the operation requires a root and purchase program. Also we look messageshereandhere. 4.18The Updater writes that there are no updates. I click "download update" and something starts to download. - The same version of the firmware that is installed on the phone is downloaded. The firmware is downloaded to the downloaded_rom directory. Take a look there and see. 4.19Is it possible to make a backup on firmware X and restore this backup on firmware Y? - You can, technically no obstacles. But to guarantee the stability of the device and applications can not be. It is recommended to install all applications from scratch. 4.20How to install Root on the second space MIUI? - In the SuperSU settings, check the "Enable multi-user mode" checkbox. 4.21Why doesn't the update come by air, despite the fact that it came out? - The official update is not sent to everyone at once, but consistently and can last about 2 weeks. - Settings ->Additionally ->For developers. Make sure that you have enabled MIUI Optimization. By default, this option is enabled. MIUI optimization is integrated with many MIUI functions, such as User Interface (UI), OTA, etc. - There are still test updates that are sent selectively. Such updates may not come to you personally; moreover, such updates may never be officially announced. 4.22If the firmware update, will the mods that I installed fly off? - Yes, fly off. Mods will need to be installed again. 4.23I can not enter the recovery through the volume + power buttons. - This inconvenience has appeared since the September 2017 firmware, and not only on the RN4 MTK, but not all. The reason is not known. Perhaps the Chinese have changed something in the bootloader. The bootloader is the lk.bin firmware module (little kernel), sometimes called "uboot". You can enter the recovery through the built-in application "Update" ->three dots ->Reload in recovery. 5. TWRP Recovery 5.1I can not copy TWRP backup to PC. Download the phone in TWRP or in Fastboot mode. Files must be copied. If not,watching experiencefromCAMUS567 . For the future, save backup directly to the USB flash drive. 5.2I get an error in TWRP Recovery "Unable to restore System mounted read only". - In TWRP Recovery, in the Mount section, uncheckMount system partition read-only. 5.3Why are the settings flashing in TWRP, for example Russian into Chinese? - At the root of the available phone memory there is a TWRP folder. It has a hidden .twrps file, it stores TWRP Recovery settings. You may have deleted this folder / file. Boot into TWRP, make the necessary settings and these folder / file will be created automatically. 5.4How to block the entrance to TWRP? - Settings ->Additionally ->Privacy ->Encrypt device. The encryption process may take some time, and may also increase the download time of the smartphone. Note Item names may vary depending on the translation. 6. MultiROM firmware 6.1I can not download a stable firmware. - Multi-introduced a restriction on downloading Stable firmware. 1. The user must have an account on the site. 2. The user must have at least one donut (1 donut = 10 rubles). 3. For downloading the firmware, bagels are not removed or burned. Also haveother restrictions: 1. No more than 2000 simultaneous connections (if the limit is exceeded, an error 503 appears, which many have encountered). 2. No more than 3 simultaneous connections from the same IP address (please configure your rocking tools correctly, do not exceed the limit, this leads to a waste of traffic, resources and channel clogs). 3. Recoil rate - no higher than 768K per connection. 4. You can not download the firmware browser with the included "turbo" functionality or through Google Chrome - these browsers allow traffic through their proxy server. And through honest FireFox - you can. They say you can bypass the restrictions and download Tor Browser'om or open a link to the file in incognito mode. 6.2I can not download from Google Play, requires wifi. - On the desktop, the Tools folder ->Downloads ->three points in the upper right corner ->Settings ->Download Limit ->Unlimited, seein pictures. 6.3An error occurred while connecting the application to Google Play services. 1. If the application fails to connect to Google Play services, enable everything in the GP services: Settings ->Installed Applications ->Google Play Services ->Application Permissions ->Application permissions seein pictures. 2. To fix the error of Google services, go to Tools ->Permissions ->Permissions ->Location In the upper right corner, select "Show system processes" and provide permissions for the Play Store and Google Services (if any). 6.4How to switch to the MultiROM firmware? - It is enough to follow a simple rule: FULL wipe all data. And no application recovery. Only this method guarantees bug-free operation of the MultiROM firmware. 6.5Multiram supports OTA? - Yes, but only VIPs are available. To receive VIP status, it’s enough to donate 500 rubles to the project. 6.6After a reboot, the brightness slider flies to the left in the curtain, the sleep mode is reset to the default value of 15 seconds. How to be? Multirom 8.2.2.0 - They say - firmware bug. 6.7Multirom 8.2.2.0 reboots when calling from unknown numbers. - Try to disable the "Black List" in the settings of the dialer. 6.8Fix permanent requests to access the drive. - If after each reboot, when you open the application, access is requested, go to Tools - Permissions - Permissions - Other permissions and allow the necessary applications to access the internal memory,more on the website Multir. Cross FAQs for RN4 and MIUI FAQ changes 07/01/18 - Update 3.29 04/23/18 - Update 3.20 11/27/17 - Ext. 4.23 11/05/17 - Update 2.13 10/21/17 - Update 6.1, 4.2 10/08/17 - Update 3.26 09/29/17 - Ext. 3.28 09/02/17 - Ext. 5.4 08/04/17 - Update 6.1 07/31/17 - Update 3.27 07/30/17 - Update 3.4 07/10/17 - Ext. 3.26, 3.27 07/06/17 - Ext. 6.8 06/27/17 - Ext. 6.6, 6.7 06/22/17 - Update 3.13. Added spoiler 6. MultiROM firmware. Removed 3.14, 4.13 06/05/17 - Update 3.23, 1.10, Ext. 1.17 05/30/17 - Update 3.4, 3.25 05/22/17 - Update 1.9 05/20/17 - Ext. 5.3 05/13/17 - Ext. 4.22 05/03/17 - Ext. spoiler 5. TWRP Recovery Errors. Question 3.22 is moved to 5.2, another issue is replaced by 3.22. Updated 4.5, 4.10 05/01/17 - moved 3.19 to 4.21 04/11/17 - Ext. 4.20 04/09/17 - Update 3.22 04/08/17 - Ext. 4.19 03/27/17 - Ext. 3.24, 4.18 03/22/17 - Added spoiler 4 03/21/17 - Update 1.9, 1.16 03/20/17 - Ext. 2.28 03/06/17 - Ext. 3.23 02/28/17 - Update 3.19 02/11/17 - Ext. 3.22 01/28/17 - Update 1.10 01/25/17 - Update 3.18 01/22/17 - Update 2.11 1/19/17 - Ext. 2.27 01/11/17 - Update 2.3 01/04/17 - Update 2.26, ext. 3.21, 1.16 12/31/16 - Ext. 3.20, 1.15 12/19/16 - Update 2.17 12/08/16 - Update 1.6 12/06/16 - Ext. 3.19 11/13/16 - Update 3.18, ext. 2.25, 2.26 11/06/16 - Ext. 3.18 11/4/16 - Ext. 3.17 11/02/16 - Update 3.13 10/31/16 - Ext. 3.16 10/30/16 - Ext. 1.14, Update 3.15 10/26/16 - Ext. 1.13, Update 1.2 10/23/16 - Ext. 3.15, 1.12 10/20/16 - Changed 3.13. Add 1.11 10/16/16 - Ext. 2.22, 2.23, 2.24 10/15/16 - Ext. 2.21 10/11/16 - Ext. 3.14 if you have something to add please write to me in private messages (QMS), or the curator of the topic. If the FAQ helped you, click the "Good" button below.  Post has been editedD_Godunov - 01.07.18, 03:14 Reason for editing: see Changes in FAQ -------------------- Winner of the Walk of Fame 2018-2019! |
Message#5 11.09.16, 23:33 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 495 Check in: 31.08.06 Xiaomi Mi Note Reputation: 51 | collected another TWRP 3.2.0-2 fromCoffacecompiled based on TWRP 6.0 TWRP itself  cofface_nikel_recovery.img(13.71 MB)The installation process "stupidly copy and paste" - condition: your device has a bootloader unlocked - reboot the device by holding the volume down button - keep it until we boot into fastboot (green hare) - we connect to the PC (at the same time we must have ADB tools (the latest version and manuals can be downloadedhere) and drivers - make sure that Redmi Note 4 is connected to the PC and correctly identified - we throw TWRP in the folder where the ADB tools are located, open the console - enter commands adb reboot bootloader fastboot flash recovery cofface_nikel_recovery.img fastboot boot cofface_nikel_recovery.img After the last command - the device is loaded into TWRP Post has been editeddoberman_dsl - 13.09.16, 13:24 -------------------- Xiaomi Mi Note 64Gb MoKee Android 9.0 |
Message#6 14.09.16, 07:13 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 162 Check in: 03.02.10 Apple iPhone 7 Reputation: 35 | I sewed my device. Did this: 1. I downloaded the Chinese firmware for developers from the official site and flashed it using the standard update program (directly on the phone); 2. Logged in to your mi account and unlocked the bootloader; 3. Installed a new recovery via fastboot (the instruction is in the header); 4. I downloaded the recovery, made a full wipe and data formatting; 5. I dropped the microsd firmware from Xiaomi.eu (sorry, but there are no stable ones yet); 6. Turned off the device, put the flash drive and again downloaded the recovery; 7. Installed a new firmware from a flash drive; 8. Profit! Recovery for something swore, but the phone wound up without question. -------------------- It has long been no longer engaged in the bulkhead under android to support the replacement ttl, my apologies. |
Message#7 14.09.16, 18:07 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 495 Check in: 31.08.06 Xiaomi Mi Note Reputation: 51 | For those who need to install GAPPS on MM or Nougat, there are 2 simple ways to do this: 1. Through TWRP installMM gapps 2. For installation from the systemgoogle installer v2 For those who have already installed the Google installer but still get errors and crashes, you need to download this.Google Installation Packand update some components in the following sequence: - Google Account Manager - Google Service Framework - Google Play Services - Google Calendar Sync - Google Contacts Sync - Google Play Store - Calendar 5.5 After that, we set permissions for the Google Service Framework, Google Play Services and the Google Play Store Screenshot  шшшшшш.jpg(102.59 KB)reboot the device Post has been editedD_Godunov - 26.10.16, 06:29 Reason for editing: In the header -------------------- Xiaomi Mi Note 64Gb MoKee Android 9.0 |
Message#8 17.09.16, 09:37 | |
Local [offline] Group: Banned Messages 298 Check in: 03.01.13 HTC One (M8) Reputation: 5 | For those who want to switch from CHINA STABLE to CHINA DEV without flashtool and PC. The loader is locked, Root is not. 1. Download Full Rom China Dev. 2. Copy without unpacking to the smartphone, you can in the folder downloaded rom 3. Charge the smartphone, connect to the Internet and launch the standard updater, click * ... * in the upper right corner, select choose update package. Specify the downloaded ROM. 4. Select update. DATA WILL BE ERASED (external memory exception) 5. The phone will restart, wait for the installation to complete. CHINA DEV is installed. : D |
Message#9 17.09.16, 11:45 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 495 Check in: 31.08.06 Xiaomi Mi Note Reputation: 51 | [email protected], 10:00  Good morning. My TVRP also does not see the system, I can not make wipes, I could only flash through OTG, TWRP does not see my memory. Where to dig, what to do? Search this topic did not find You need to format the data section in TWRP. This section is initially encrypted, so there is no access to it. -------------------- Xiaomi Mi Note 64Gb MoKee Android 9.0 |
Message#10 17.09.16, 21:15 | |
Visitor [offline] Group: Users Messages 10 Check in: 15.01.16 Reputation: 3 | I will unsubscribe from the results of my wild whistle with firmware ... The first time doing these things, do not hit the tapkai much))) At first I tried to flash the newly arrived phone via flashlight on xiaomi.eu - I received “MI” on the screen of infinite loading and hours spent in vain. I asked for help with Ultra164, I sorted it out together like that ... Where I tried other versions: the official developer, the stabilizer ... The result is the same) And apparently somewhere in the process (more precisely when formatting with flashtools, I don’t know what I did on my own initiative) I lost IMEI .... I tried my luck with XiaoMiFlash. Unfortunately, she turned to the forest front, back to me))) Some time experimenting, randomly shifting parts of the firmware in some places. Hope, of course was, but weak. Not justified. So I incorrectly filled out and sent a xiaomi unblocking request: I wrote my usual name in Latin letters and indicated the need to establish Russian as a reason.tongueon the phone))) Nothing, two days later they approved it))) Then the most interesting thing started: I downloaded MiUnlock and entered the ID and password from the received SMS. I will not say that on the phone at that moment there was some kind of indistinct mixture of two firmware))) Unblocked))) Then I asked for the developer official firmware - and oh, a miracle! The device is loaded! Although the Russian language in the settings there. Well, I think, right now I'll go through xiaomi.eu flashtools, everything will be rosy! As if not so) Again the bootlap))) I rolled back to the stable - I'm looking for a root. And there is no it) I reflash to developer and get it))) Next, install ADB and try to flash TWRP through it. I do according to the instructions - but the computer does not see the phone in the fastboot. Included sees, and so - no ... Well, I turned to doberman_dsl for help, he also wrote that TWRP was flashing and successfully solved the problems that arose. He advised me to reinstall the ADB firewood so that the computer could see the phone in the fastboot. Only while waiting for an answer chatted with a good friend green_fenix, who suggested another way: ToolHero. So I installed TWRP))) Then I did not really understand how to flash unofficial firmware through this recovery. Here again, doberman_dsl rescued: I said I need to format the data section. I searched for the format button for a long time until I found it in the most prominent place))) I formatted it, loaded it into the OS, put ToolHero (the data was all gone while formatting) and dropped the firmware on the USB flash drive, trying to enter the recovery via ToolHero - a fig. Give Ruth. And it is not. Fortunately, I remembered that when turned on with the volume up button pressed, the devices usually entered into the recovery))) I went in, flashed the necessary firmware, loaded into the OS, I chose the language: Russian is! Uraaaaaaaaa !!! It is time to restore IMEI! Fortunately ToolHero for this has a corresponding menu item and IMEI is written on the box. I put ToolHero, I try to install the necessary IMEI - says root come on. I climb in settings - to receive. And not him. No, there are settings, as well as the item "permissions" in the "application" block, but the point of receiving the root is not. Trouble I tried the application to get it - nothing happened. I had to put SuperSu through TWRP. Put, changed IMEI to those written on the box, rebooted the phone - it said the wrong IMEI. I put a SIM card in — I called the home phone — I dialed and scored) It rings — and you don’t need any other) I guess the story sounds funny for experienced users as well as for beginners, but it has some sad moments ...) So if you summarize what I still had to do to successfully flash the phone, you can get the following: 1) Write a request to unlock the bootloader. For example, here'sthisinstructions. Although with filling there a little less strictly, he checked))) 2) actually, unlock the bootloader. Here isSoeg. Although as already mentioned, there is a possibility that it is the developer firmware that is not needed for this))) 3) Get the root. To do this, after downloading the phone, you just need to select English and click on permissions in the settings, find the item with the magic word root))) There you will find five warnings in a row. Always click on the right button, where the timer counts time) And yet do not forget to connect to the Internet! And then they will not give root) After the end of the download, it can stall by 100%, but do not worry. Feel free to go to the main screen, kill the settings process and come back. Go to the same place at the root, click and it will start decoding. There he will do everything himself) 4) It's time to put custom recovery! For example bythisinstructions. And if the ADB does not see the device, you will have to reinstall its drivers ... Or tryToolHero. It is easy to install, but you will have to rename it (it’s difficult how))) cofface_nikel_recovery.img to recovery.img, then throw it into the phone. Although you can and other recovery of the appropriate model of course. All that remains is to select the recovery item in ToolHero and specify the file we need. 5) Further, when the phone loads such an unusual at first glance TWRP, you need to format the data section. Select the Russian language, click the cleaning button and at the bottom right you will see the desired button: Format data. It remains only to click))) After your phone will load a goal like a falcon) You have formatted all user data: now they are not. 6) It remains only to fill in his memory with the necessary firmware for firmware via TWRP 7) ... the last seconds of waiting the most exciting) 8) Done! Your phone will happily boot onto the newly installed firmware and you can choose at least Russian, even Ukrainian, at least one of about thirty languages (if it’s syaomi eu. I don’t know how many there are in multi-volume))) If you also miraculously fly IMEI, then you can install SuperSU via TWRP (there is no “get root” option in the settings), then put HeroTools and change your IMEI in it. Maybe he, too, somehow will be wrong, but you can definitely call. Post has been editedD_Godunov - 21.10.16, 15:28 Reason for editing: raised in the topic header |
Message#11 20.09.16, 00:54 | ||
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 645 Check in: 07.05.10 Xiaomi Mi 8 Reputation: 65 | Nodead @ 09/19/2016, 19:15 On the last weekly xiaomi.eu - it climbs when it is turned on and sometimes ... error com.mediatek.selfregister - do I have one? Go to the settings in the "all applications" there tab all and in the list find com.mediatek.selfregister go into it and at the bottom there will be application permissions, allow there these two items that are
Post has been editedzoom2005 - 20.09.16, 00:56 | |
Message#12 21.09.16, 11:06 | |
Visitor [offline] Group: Users Messages 11 Check in: 26.09.07 Fujitsu-Siemens Loox N520 Reputation: 0 | Regarding why he doesn’t see twrp as mtp, everything is very simple, you manually change the adb driver to a composite device and it rearranges the two drivers in normal mode and the computer sees it and put adb on it, this is a joke with Xiaomi and more , I don’t understand how to clean it, and I don’t need it, it’s much faster to move my hands than to sit and sweat over the computer and look for a problem! Posted 09/21/2016, 11:07: still do not forget from under twrp to make format data (yes) and then everything will be fine to see all the memory! |
Message#13 21.09.16, 23:01 | |
Novice [offline] Group: Active users Messages 36 Check in: 01.08.12 Jiayu G3S Reputation: 2 | Shells, Fuck, these adb are not needed, the main thing is to install the recovery after unlocking the phone according to the first instruction in the header for firmware. I installed the recovery through the tulhiroo, and I threw the firmware on the USB flash drive and through the cable I connected the phone to the phone and installed the firmware directly from the USB flash drive, before that I made all the vamps of course. |
Message#14 23.09.16, 18:28 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 433 Check in: 14.03.13 Reputation: 33 | -------------------- kosmos2011 Firmware Global Stable 10.2.2.0. |
Message#15 24.09.16, 01:17 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 585 Check in: 30.10.13 Pocophone F1 6/128 Reputation: 114 | about miflesh. Nakosyachil with xposed peeped in quite quickly, again put the developer. But he stumbled into what blocked the bootloader again. Fortunately, there was an unlock on the second aquantuct, re-unlocked it, so keep in mind who loves to jerk off that if it is hard to check out twice a month, it will take half a month or even the whole month to endure Chinese. -------------------- Cheat gold nfs no limit, Futurama worlds tommorow, write in hp |
Message#16 24.09.16, 08:39 | |
Ebony merchant [offline] Topics Curator Group: Curators Messages 2715 Check in: 09.04.16 Reputation: 1192 | Archive caps Important information! A This topic on the phones Redmi Note 4 (4X) on the MediaTek Helio X20 chip o10 cores! If you have a Qualcomm Snapdragon chip8 coresthen go to the topicRedmi Note Firmware4X Snapdragon. How to distinguish RN4 on MTK from Snapdragon inFAQ 40. ❕ Increased battery consumption and heat can be associated with updating the Google Duo app.A simple solution. ❕ After upgrading to MIUI 9, a considerable number of forum participants are "on battery and overheating," so keep this in mind when updating. To roll back from MIUI 9 to 8-ku (praise V8.5.6.0) useinstr. for SP FlashTool. Before rollback makebackup by phone. And,do not discharge the phone "to zero"! It often happens that after a full discharge the phone does not start. ❕ Redmi Note 4 MTK is running MIUI 8, MIUI 9 and MIUI 10 based on the Android 6.0 operating system. Upgrade to Android 7, 8, etc. on our phone - will not be! itofficial developer response. Earlier ... ❕ Attention! Native split screen mode split screenmoreavailable since Developer 8.3.29. A new implementation of the "Silent" mode in MIUI 9 only for Android 7 firmware, i.e. On our phone, this function (yet) is not. ❗ Owners of phones with a memory capacity of 4/64 GB when using SP_Flash_Tool be sure to uncheck the preloader. If it is already a brick, then it is necessary to be made strictly by the Chinese preloader,by thisorby this. � Who doesn't likewhite background, iconsand other design after updating the firmware, install a third-party theme or another set of icons fromCatalog order MIUI v6 / v7 / v8 / v9and do not write here about it - it is offtopic and is not discussed here. Announcement - ifdownloaded themes no longer applied. And once again: here it is not discussed! ❕ Before flashing, check the integrity of the downloaded archive by the program.Hashtab. The MD5 hash sum is indicated in the “tail” of the archive name of the last 10 characters, for example:miui_HMNote4Global_V9.2.2.0.MBFMIEK_e04e78ae8a_6.0.zip. ❕ FirmwareDev 7.5.25, a glitch with charging is solved by changing the lock screen to any other, non-default one, or switching to Settings. for developers ->Skip lock screen. Another way: switch to English / Chinese. How to send a bug report. ❕ Who does not have enough vibration when unlocking a print on 8.2.1.0 ❕ With the update of firmware Dev 7.5.11, information about RAM is no longer displayed in the "Recent" menu by default. Included in the "Screen Settings / Desktop / Recent Applications." Depends on lang. translation. Before asking a question So, you first decided to flash the phone or unlock the bootloader? Start by readingGuides for "dummies" from the "kettle". Do not rush to write. Read pleaseHow to ask questions? Detailed answers (and questions), manuals / instructions are encouraged by pluses and raising the reputation of the participants and the curator. Questions that have answers in the header / FAQ are minus and deleted without warning.
Drivers and Utilities
Firmware Firmware Archive. All about MIUI versionsA guide for beginners. Are commonrecommendationsfirmware upgrade. Best firmware. We decrypt the name of the archive. Official Official download pageH mui.com | en.miui.com | www.miui.com | Instructions. Anglo-Chinese stable - China Stable English-Chinese beta - China Developer Suitable for unlocking the bootloader. Root is built into the firmware.How to activate the root in pictures. Recovery- for installation from Recovery it is also "three points", TWRP; Fastboot- to install from the SP Flash Tool / MiFlash and in Fastboot mode (hare).
International Stable - Global Stable Recovery- for installation from Recovery it is also "three points", TWRP; Fastboot- to install from the SP Flash Tool / MiFlash and in Fastboot mode (hare).
International Beta - Global Developer Suitable for unlocking the bootloader. Root is NOT built into the firmware. Recovery- for installation from Recovery it is also "three points", TWRP; Fastboot- to install from the SP Flash Tool / MiFlash and in Fastboot mode (hare).
Localized ❗ All firmware below are installed only from TWRP Recovery. When lowering the version before the firmware, do Wipe Data.
Recovery, Root, Modems, Kernel How to get root access or install TWRP recovery? Root and TWRP is installed only after unlocking the bootloader (unlock bootloader). Question: Is it possible somehow simpler without these problems? Answer: No, it is impossible. First unlock the bootloader, then TWRP and Root. There are no other ways! The hardest part is getting approval for unlocking. Approval may not be given for a long time, but they may not give out at all, and it happens that they give in 10 minutes - in general, a lottery. All questions about unlocking should be asked in a special topic.Unlock bootloaders Xiaomi. Here in the firmware, such questions are offtopic and are deleted without warning. Do not waste your time. After receiving approval, installing TWRP and Root takes 5-10 minutes. Recovery
Root To get Root access, simply flush the SuperSU or Magisk archive from the TWRP. What to choosereview.
Improves / degrades everything related to the network and signal quality. Which one is better and which one is worse do not ask, because everyone uses different operators and different towers. Try it.Volumetric work on testing modems. howfind out the version of the modem.
Kernel core Sabotage post # 62568280read reviews under the post and morereview. Instructions Disabling unused frequencies / ranges in an engineer can lead to IMEI / modem dump!Not at all, but there were precedents. Repair IMEI below.
Device firmware&
Backup, BackUp Block addressnvram: linear_start_addr: 0xab00000; partition_size: 0x500000. These valuestake from scatter.txt
Recovery, Root, ModemA
Drivers
Recovery, Test, SetupD
Bootloop cyclic reboot❗ In the case of a bootlap and a cyclic reboot (which is identical), throw off the cable from the battery for 10 minutes. Most likely the problem is in the battery power controller. This problem is not uncommon on modifications with 4/64 GB memory, less often on 3/64, etc. It is better to immediately go to the store / service and replace the battery or phone.
Sensor Calibration / Sensor Setup✱ If the region and time zone flies# All instructions need Root access.
NVRAM WARNING error correction: Err = 0x10R
Mi account device search / activation bypass- Unlink a Mi-account officially. There are 2 types of locks:
In firmware up to version 8.0.4.0 inclusive, you can freeze Mi-services. Further - only with them.
Bluetooth Bluetooth troubleshooting
Video instructionsY
System Mods, Patches Mods and Patches Design Template You can not freeze, especially to remove native Explorer (File Manager)! Problems guaranteed. To use the mods and patches, you need a moderation, and sometimes root. Patches
Modifications / Tviki
Programs, Utilities, Scripts Scripts
miscellanea C Poll: Which version of MIUI is most comfortable for you? C Poll: Which firmware do you most comfortable on? Installed a new firmware? Take an hour, take part in the experiment!  Attached files to topic, how to use.✓ MIUI 9 complete changelog- English A picture on a black background, the contour of the phone with a cable connection - this is the native recovery.Nothing can be done in it! Related Topics Navigator Discussion topics MIUI 8 | Catalog of the MIUI v6 / v7 / v8 | MIUI - Modification and decorations �� | Owners Club��� | Benchmark - results���
Update caps Update archive Caps October
September
August
July
June
Post has been editedD_Godunov - 06.11.18, 07:11 -------------------- Winner of the Walk of Fame 2018-2019! |
Message#17 24.09.16, 11:50 | |
Ebony merchant [offline] Topics Curator Group: Curators Messages 2715 Check in: 09.04.16 Reputation: 1192 | Natural (native) installation of Google Play Market in Chinese firmware. Alternativethis way 1. Open the Chinese Mi App Store Market 2. Search write: google 3. Poke into the line with a blue icon (if suddenly there is not, then with a green one) 4. Click Install 5. Run the newly installed application. 6. Press the big blue button and agree with everything that you offer in Chinese and English Source with pictures Post has been editedVlad J.S. - 24.09.16, 11:57 Reason for editing: In the topic header. -------------------- Winner of the Walk of Fame 2018-2019! |
Message#18 24.09.16, 11:56 | ||
User [offline] Group: Friendssavagemessiahzine.com Messages 50 Check in: 01.06.13 Xiaomi Mi Max 2 4/64 Reputation: 2 | How to calculate who loads the system? Most of the cores are asleep, but cpu-z shows the processor load constantly in the range of 30-50%. Firmware original Chinese 8.0.7.0 a photo
| |
Message#19 24.09.16, 12:33 | |
Ebony merchant [offline] Topics Curator Group: Curators Messages 2715 Check in: 09.04.16 Reputation: 1192 | Google Apps Alternative APK Pure.comor branch onsavagemessiahzine.com Install APK Pure on your phone and you will get most of the apps from the Play Market. Notifications of application updates, search programs. Updates sometimes appear even earlier than the Play Market. Of the minuses: no reviews and rating of applications. But if you are already thinking about an alternative to the Google store, then the lack of feedback will hardly stop you) APK DownloaderMirror Google Play Market through the browser. There are all applications. Any application from the Play Store site can be opened in the APK Downloader and downloaded .apk Replace addressplay.google.combefore the first slash/to addressapk-dl.com play.google.com/store/apps/details?id=en.yandex.money on apk-dl.com/store/apps/details?id=en.yandex.money and you can download the installation Yandex.Money apk Another mirror play market:http://www.apkmirror.com/ Post has been editedD_Godunov - 18.12.16, 23:50 Reason for editing: In the topic header. -------------------- Winner of the Walk of Fame 2018-2019! |
Message#20 24.09.16, 14:25 | |||
Ebony merchant [offline] Topics Curator Group: Curators Messages 2715 Check in: 09.04.16 Reputation: 1192 | herrfelix in this manneryou install the full range of google services In the Chinese market, the Google Installer application in Chinesehere translated into English.or you need to install a zip archive fromof this instructionin English. after installing the Google Installer, it is necessary in the standard Security / Service application to set permissions for the Google Service Framework, Google Play Services and Google Play Store, as indicated in that instruction.
Post has been editedsnekt - 24.09.16, 17:59 Reason for editing: raised in the topic header. -------------------- Winner of the Walk of Fame 2018-2019! | ||
Message#21 24.09.16, 14:41 | |
Novice [offline] Group: Active users Messages 37 Check in: 14.02.12 Samsung Galaxy S8 Exynos Reputation: 1 | limon7777, https: //drive.google.c...0VY3ljTHBvWG9qZFU/view Try to install the driver! (It seems they) "I'm a hundred" If Windows 10! It is better to do it right away in safe mode!))) Post has been editedbsbsega - 24.09.16, 14:45 Reason for editing: |
| mobile version | Now: 05/08/19 06:10 |
©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement