Bravis B501 EASY - Official firmware
Bravis B501 EASY - Official firmware
Bravis B501 EASY
Firmware пїЅ
Kingroot and is discussed here
There is no curator in the subject. For filling caps, please contactmoderatorssection through a button
under the messages to which you want to add links.
Post has been editedP-a-h-a - 06.05.17, 01:43
Bravis B501 EASYFirmware пїЅ
Drivers and Utilities
USBdriver_TSHARK28_W14.41.5.rarOfficial firmware
Instructions
How to flash:
Downloading drivers, firmware and utility file for the insertion of the above links. Extract the files to your hard disk in any folder. Charge your phone for at least 30%.
1) Install the drivers for your OS from USBdriver_TSHARK28_W14.41.5 folder (32install.exe / 64install.exe). During the installation we agree with all inquiries
2) Run UpgradeDownload.exe program (located in the folder for the firmware _utilita UPGRADEDOWNLOAD_R3.0.0001 / BIN / UpgradeDownload.exe)
3) Click the left top Load Packet button (round button with a gear) and choose the firmware file is downloaded with a resolution of * .pac Wait for the program will check the firmware file (less than a minute)
4) Click Start downloading button (circular arrow button to the right)
5) Turn off the phone, hold the volume button "minus" and connect the USB cable, release the volume button a few seconds
6) Wait until approximately 100 seconds is firmware download. At the end of the utility of the process write"Finish" in the case of a successful download or "Pass" in case of failure
7) Turn off your smartphone Bravis B501 EASY by USB and turn on him. A few minutes later the phone will boot
8) yielded pure smartphone with the new firmware. Before closing the program UPGRADEDOWNLOAD press the round button "Stop" with the square
Downloading drivers, firmware and utility file for the insertion of the above links. Extract the files to your hard disk in any folder. Charge your phone for at least 30%.
1) Install the drivers for your OS from USBdriver_TSHARK28_W14.41.5 folder (32install.exe / 64install.exe). During the installation we agree with all inquiries
2) Run UpgradeDownload.exe program (located in the folder for the firmware _utilita UPGRADEDOWNLOAD_R3.0.0001 / BIN / UpgradeDownload.exe)
3) Click the left top Load Packet button (round button with a gear) and choose the firmware file is downloaded with a resolution of * .pac Wait for the program will check the firmware file (less than a minute)
4) Click Start downloading button (circular arrow button to the right)
5) Turn off the phone, hold the volume button "minus" and connect the USB cable, release the volume button a few seconds
6) Wait until approximately 100 seconds is firmware download. At the end of the utility of the process write"Finish" in the case of a successful download or "Pass" in case of failure
7) Turn off your smartphone Bravis B501 EASY by USB and turn on him. A few minutes later the phone will boot
8) yielded pure smartphone with the new firmware. Before closing the program UPGRADEDOWNLOAD press the round button "Stop" with the square
screenshot UPGRADEDOWNLOAD
 |
A warning
Whatever you do with your smartphone,you do at your own risk. The author of the communication does not bear any responsibility for your use of third party software. Incorrect actions during piercing may result in damage to the smartphone.
ROOT
rain .. @ 14.02.17, 01:33
Rutirovat can program kingroot, etc. Ruth Eksplorer to clean the system from unnecessary stuff, edit the build prop.
There is no curator in the subject. For filling caps, please contactmoderatorssection through a button
under the messages to which you want to add links. Post has been editedP-a-h-a - 06.05.17, 01:43
Reason for editing: adding a reference to reuploaded of. firmware Yandex Disk and Root
scorp33scorpion, Bad course, my dear little crooked working, the battery consumption of applications does not show for example, the network speed is not present, in general saw and cut it again.
Guys all pryuvet! Tell me how to reset the switch without losing data? Couple poluchaetsya not in any way!
Rutirovat can program kingroot, etc. Ruth Eksplorer to clean the system from unnecessary stuff, edit the build prop.
Post has been editedrain .. - 15.02.17, 18:26
Post has been editedrain .. - 15.02.17, 18:26
Those who remained firmware, please fill in the file sharing. On off only site you can download instructions)
Phone does not work with the networks. How it looks: in places the average level of the signal it butet work fine until you catch the dead zone, and then begins, there is no SIM card, no network, and when they return to the place with the Independent user signal situation does not change, are trying to connect to the network, on the a couple of seconds and then catches the '?' instead of the signal indicator. Restarting does not help. Rearranged sim does not help. Helps only restart signal in a place with an excellent level, and further work on the average, and so until next time, until the word of the dead zone. As for the two SIM, then there is a little more complicated, loss of signal on any of them will lead to the same consequences, then it is necessary to do a restart in place a good signal of the two operators, or get a sim where the signal is poor or non-existent operator. I will bring the example I have is dual SIM home caught well on the job one does not catch you need before going to work to disable sim card in advance and at home include again, if you do not turn off and formed the problem, the switches will be unavailable, and you need to do operations pulling out the SIM cards. Verdict: radio firmware.
As there is a problem with a mobile access point, the signal is stable but traffic from the phone to the tablet comes not always, 10 seconds is normal and then sekunt five Polshi calm, then break and so the circle. The verdict: the development of a new version of the software radio. Firmware
As there is a problem with a mobile access point, the signal is stable but traffic from the phone to the tablet comes not always, 10 seconds is normal and then sekunt five Polshi calm, then break and so the circle. The verdict: the development of a new version of the software radio. Firmware
M
Topic locked due tolong inactivity and will be moved to the archive.
If you need to add something to the topic, you can contact any section moderator.Android - Firmware
If you need to add something to the topic, you can contact any section moderator.Android - Firmware
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement