Assistant
REPLY |
Blackview BV6000S - Discussion | Smartphone, 4.7 "" |
Message#1 23.08.16, 09:00 | ||
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 554 Check in: 25.09.07 Reputation: 50 | DiscussionBlackview BV6000s Blackview BV6000s Description | Discussion � | Accessories �
Specifications MediaTek processor (CPU), 4-core: MT6735A - 1.3 GHz (first edition), MT6737M - 1.1 GHz (limited edition without Glonass support), MT6737T - 1.5 GHz (currently available) Graphics Processing Unit (GPU): Mali-T860 MP2 (Mali T720) Random access memory (RAM): 2 Gb Device Memory (ROM): 16 Gb Screen: IPS 4.7 "HD 720x1280 Cameras: 8 Mp main and 2 Mp frontal Battery: Li-Polymer, 4500 (4200) mAh with support for the function of fast charging (only in the model without "s") Slot for two Micro-SIM cards, TF Card Wi-Fi: 2.4 GHz 802.11 b / g / n;5 GHz 802.11n Networks: 2G: GSM 850/900/1800/1900 3G: WCDMA 850/900/1900/2100 4G: LTE 800/1800/2100/2600 NFC, OTG, G-Sensor, pressure sensor, PTT, SOS Android operating system 6 "Marshmallow" and Android 7 "Nougat" Photo Firmware Installed in the device processor, the easiest way to determine the firmware version. Settings - About phone - Build number. BV6000S_Blackview_V01_2016 **** - MT6735A processor BV6000S+_Blackview_V01_2016 **** - MT6737M processor BV6000S_T_Blackview_2016 **** - MT6737T processor Official Flash Tool Firmware Firmware for devices based on the MediaTek MT6735A processor The first numbers in the name of the firmware is the date of its release. Android 6 "Marshmallow" 20160809_cs2v35_jk 20160830_cs2v35_jk 20160913_cs2v35_jk (update "by air" is not recommended by the manufacturer) 20160929_cs2v35_jk Firmware for devices based on the MediaTek MT6737M processor The first numbers in the name of the firmware is the date of its release. Android 6 "Marshmallow" 20161009_cs2v37 + _jk Firmware for devices based on the MediaTek MT6737T processor The first numbers in the name of the firmware is the date of its release. Android 6 "Marshmallow" 20161125_cs2v37t_jk 20170331_cs2v37t_jk 20170717_cs2v37t_jk Android 7 "Nougat" 20170622_cs2v37t_jk 20170711_cs2v37t_jk 20180104_cs2v37t_jk 20180314_cs2v37t_jk Unofficial Flash Tool Firmware Firmware for devices based on the MediaTek MT6737T processor Android 7 "Nougat" Firmware based on BV6000S_R02_08.11.2018_V1.2 from KRUSTY03 Firmware based on 20180911_cs2v37t_jk from KRUSTY03 Firmware based on BV6000S_R02_08.11.2018_V1.2 from KRUSTY03 Drivers and Flash Tool For correct work with devices based on MT6737T processors, it is better to use SP Flash Tool v5.1724. With other versions of the program there are problems of various kinds. Talk SP Flash Tool SP Flash Tool v5.1724 Flash Tool Drivers Drivers for firmware + Flash Tool MTP driver for Windows 10 from the manufacturer Root and Recovery All changes made to the original software of the smartphone, the user makes at your own peril and risk, taking full personal responsibility for possible consequences. Login to Recovery To enter the factory Recovery, on the switched off device, press and hold the "Volume +" and "On" keys. After the appearance of the logo, "On" should be released, and "Volume +" should be pressed until the entrance to Recovery. If a broken robot appears on the screen and the inscription "No Commands", you need to press and hold the "On" button and press "Volume +" once. Translation of Chinese menu in Recovery Mode Installing Recovery and Root TWRP 3.0.2 and Root for MT6735A TWRP and Root based on firmware 20160913_cs2v35_jk is suitable for installation on a device with firmware 20160929_cs2v35_jk TWRP 3.0.3 and Root for MT6737T TWRP 3.0.2 and Root for MT6737M TWRP 3.1.1 and Root for MT6737T TWRP for firmware 20180911_cs2v37t_jk After installing TWRP Recovery into the phone via the Flash Tool, it is unnecessary to turn on the phone, but you should immediately go into Recovery, because when you turn on the phone, TWRP Recovery is replaced by the standard Recovery and, accordingly, you can’t enter TWRP Recovery. Getting incomplete Root for MT6737T Warning - Kingo Root! Repair and disassembly Instructions Full instructions for flashing the device using the Flash Tool Installing the driver for the Flash Tool (preloader) Installing / flashing TWRP using the Flash Tool Repair IMEI Connecting the phone in USB storage mode Activation of the melody selection function on each SIM card Many useful instructions for all occasions Transferring applications to a memory card Useful Entrance to the engineering menu - * # 9646633 # Login to the test menu - * # 87 # Installed Components - * # * # 114 # * # * Problems that may arise with different versions of touchscreens Using OTG (if USB device is not detected) Battery calibration on new device GPS / Glonass testing 1 GPS / Glonass 2 Testing GPS / Glonass 3 Testing One solution to the problem with the proximity sensor (it helps not all) Solution if calibration of the proximity sensor did not produce results. Reassigning PTT and SOS buttons Differences BV6000 and BV6000s Permanent active mode in the cellular networks of Ukraineanddecisionandanother solution. Patch to fix the vulnerability of the FOTA wireless update Attention! Glove mode A warning! Disabling the "gloved" mode, in some cases, can cause the touchscreen to become inoperable. Checked on the version of the touchscreen 0x82 (to check the version of the touchscreen dial * # * # 114 # * # *). The problem is more related to the new revisions of the touchscreen and to devices with an MT6737T processor. Please send suggestions for filling caps to the curator of the topic.King-kongmessage in QMS. Post has been editedKing-kong - 26.02.19, 19:27 Reason for editing: Updating headers | |
Message#42 27.08.16, 15:35 | |
Guru [offline] Group: Banned Messages 2493 Check in: 20.03.14 Reputation: 44 | Picked up our memory to its 720th, here's a photo It works fine, the 720th has a full battery, but our device, 25% of the charge I think that all the same, the battery has not yet been swung. Post has been editednesterov32 - 27.08.16, 15:37 -------------------- 4Good T803i 3G, Blackview BV6000s, Nexus 7 (2013) Wi-Fi |
Message#43 27.08.16, 16:13 | |
Guru [offline] Group: Banned Messages 2493 Check in: 20.03.14 Reputation: 44 | I hooked up the ears of the Philips SHS390, it’s great to play, not just the regular ones (to be honest, it’s full of bullshit, although it looks beautiful). Headphone icon remains after disconnecting third-party, disappears after a while. And so, the device is normal, to get used to the size! Post has been editednesterov32 - 27.08.16, 16:33 -------------------- 4Good T803i 3G, Blackview BV6000s, Nexus 7 (2013) Wi-Fi |
Message#44 27.08.16, 17:57 | |
Visitor [offline] Group: Banned Messages 11 Check in: 26.08.16 Reputation: 0 | Has anyone already tested the battery through an osb tester? * ?? -------------------- Android |
Message#45 27.08.16, 18:11 | |
Visitor [offline] Group: Banned Messages 11 Check in: 26.08.16 Reputation: 0 | If there are problems with autonomy, but the battery through the tester will produce 4000-4200 mAh, then everything else is overclocking, calibration, battery optimization - I understood correctly ??? -------------------- Android |
Message#46 27.08.16, 18:33 | |
Guru [offline] Group: Banned Messages 2493 Check in: 20.03.14 Reputation: 44 | [email protected] @ 08.27.2016, 20:11 but the battery through the tester will give 4000-4200 mAh Through which tester? Posted on 08/27/2016, 6:34 PM: [email protected] @ 08.27.2016, 19:57 via osb tester? * ?? And what is this beast? -------------------- 4Good T803i 3G, Blackview BV6000s, Nexus 7 (2013) Wi-Fi |
Message#47 27.08.16, 21:25 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 127 Check in: 19.08.12 Reputation: 2 | 100% charge are different. By the way, you can predict the discharge of acb on a curient charge - it is cut down to 3600 mv. (Calibrate this cost is worth it). Antutu at 98% charge. Today is exactly a week after receipt. The battery has swung by 10 percent. Post has been editedkai19811010 - 27.08.16, 21:32 |
Message#48 28.08.16, 00:07 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 464 Check in: 08.11.13 Blackview BV6000s Reputation: 23 | |
Message#49 28.08.16, 06:23 | |
Lomaster [offline] Group: Friendssavagemessiahzine.com Messages 6303 Check in: 11.01.14 Blackview BV8000 Pro Reputation: 1166 | The screen of the phone Dexp Ixion 350. Iron is similar, battery 3150. Sadness is complete. The problem lies in the core apparently. I said it right away .. you are supposed not to have problems with the battery, swing it as much as you like, you don’t display the charge percentage correctly if sticking is observed! can be corrected in the update if masovo will complain .. I can try inframework-res.apkto fix it, but for this you need to know in more detail how your battery now behaves ... for example, in one mode of operation, how many lives 0m 100 to 1% and how many are kept in the same mode on a sticky percentage .. Here is my test from the big brother:Because you are weaker than iron, then the results should be even higher on the same battery! Post has been editedserg2327 - 28.08.16, 07:08 |
Message#50 28.08.16, 07:15 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 127 Check in: 19.08.12 Reputation: 2 | serg2327Since 100% are different. - start with 3900mv and the total charge for 4190 operation time from 100% to 1% is different. Also the operating time on stuck 1% differs. It should start with a charge, 100% - should be around 4140 mV, 0% should be at 3560 somewhere (I’ll check it later). Antutu 3d - standard test sags the battery for 11mv. Post has been editedkai19811010 - 28.08.16, 08:08 |
Message#51 28.08.16, 08:29 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 127 Check in: 19.08.12 Reputation: 2 | serg2327, yesterday the body turned off at these values ​​of the voltage of the acb. Is it possible to programmatically tie% of the discharge to the voltage sensor - mV which? Antutu battery test in the case of our phone inadequately gives the result, since the discharge by 4% does not correspond to the actual, and now at 99% of my charge, the test will give out about 6000 points, at 20% about 2800. I can test it, but not times, and 1.6 for a start. What is the voltage in mv of the older brother bv6000 at 100% charge? Post has been editedkai19811010 - 28.08.16, 08:31 |
Message#52 28.08.16, 08:39 | |
Lomaster [offline] Group: Friendssavagemessiahzine.com Messages 6303 Check in: 11.01.14 Blackview BV8000 Pro Reputation: 1166 | kai19811010, I'm sorry, I didn’t see it, I thought you read the testimony in the miliapers / h ... and this voltage ...! Can I rebuild the framework only as a separate file or system image to build for the firmware? I hope you do not need to remind about backup? Kstate, did you set the dialer from your older brother for yourself or not? Is it interesting to work on yours or is it necessary to edit yours? Shl. I would like to hear feedback from other users, about the battery .. everyone sticks by 1%? Can anyone have the opportunity to measure how much it flows into the battery mah? Interested in whether there are claimed 4200 and how much is poured in from 2% to 100%? Post has been editedserg2327 - 28.08.16, 08:55 |
Message#53 28.08.16, 09:00 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 127 Check in: 19.08.12 Reputation: 2 | |
Message#54 28.08.16, 09:02 | |
Lomaster [offline] Group: Friendssavagemessiahzine.com Messages 6303 Check in: 11.01.14 Blackview BV8000 Pro Reputation: 1166 | kai19811010, OK. Thank! And with the framwork yourself understand? Do you know how to replace the system files from under the android? Or is it better to assemble the firmware? Post has been editedserg2327 - 28.08.16, 09:02 |
Message#55 28.08.16, 09:09 | |
Guru [offline] Group: Banned Messages 2493 Check in: 20.03.14 Reputation: 44 | Yes, it sticks with me, I did not detect it, but for 40 minutes exactly, then I connected the memory. Post has been editednesterov32 - 28.08.16, 09:10 -------------------- 4Good T803i 3G, Blackview BV6000s, Nexus 7 (2013) Wi-Fi |
Message#56 28.08.16, 09:38 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 464 Check in: 08.11.13 Blackview BV6000s Reputation: 23 | I had 12% for 1%, then I connected the charging in the car, maybe it would have stayed longer Post has been editedDoommann - 28.08.16, 09:38 -------------------- BlackView BV6000S /TWRP / 6735A |
Message#57 28.08.16, 09:54 | |
Visitor [offline] Group: Banned Messages 11 Check in: 26.08.16 Reputation: 0 | I have about the same thing: at 1% for 2-3 hours, and then I shoot them down with races, until full discharge (already 4 times, I think that's enough), the tester is waiting from China to measure mah -------------------- Android |
Message#58 28.08.16, 10:01 | |
Visitor [offline] Group: Banned Messages 11 Check in: 26.08.16 Reputation: 0 | And with the framwork yourself understand? Do you know how to replace the system files from under the android? Or is it better to assemble the firmware? I finally can not understand about o.O -------------------- Android |
Message#59 28.08.16, 10:10 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 464 Check in: 08.11.13 Blackview BV6000s Reputation: 23 | serg2327, and if the framework from another similar body to throw? From the same dexp or something else? Or just take and compare? While on the road, but I can give from the dexp closer to the night. Post has been editedDoommann - 28.08.16, 10:11 -------------------- BlackView BV6000S /TWRP / 6735A |
Message#60 28.08.16, 11:48 | |
Lomaster [offline] Group: Friendssavagemessiahzine.com Messages 6303 Check in: 11.01.14 Blackview BV8000 Pro Reputation: 1166 | |
Message#61 28.08.16, 11:48 | |
Guru [offline] Group: Banned Messages 2493 Check in: 20.03.14 Reputation: 44 | |
mobile version | Now: 04/29/19 16:42 |