[X]Assistant

[lprot]

DiscussionOnda V919 3G 16Gb MT6582
Onda V919 3G 16Gb MT6582
Discussion пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory do you have in the machine?
• The results of performance tests of Android devices, see the topic: Benchmark
• Before posting photos, read the topic Working with Images on the forum
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

Specifications

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedsergej4388 - 14.08.16, 23:42

Reason for editing: Led to the standard section

[lprot]

I got Onda V919 3G 16Gb V1. Tortured porn advertising, entered the recovery, wiped the cache and made a reset to the factory. A clean android was loaded and advertising started again. Dropped again. Now when loading the eternal logo Onda. Is there a firmware for such a device?

Post has been editedlprot - 13.08.16, 03:26

[zeits]

[email protected], 03:12

Onda V919 3G 16Gb V1

Is this his total storage capacity of 16 GB or are you talking about the space allocated for Android?

[lprot]

[email protected], 10:21

Is this his total storage capacity of 16 GB or are you talking about the space allocated for Android?

Behind the cover it is written like this: (If I poke usb into the manager, the MT65xx Preloader appears and disappears in the manager. I put firewood under it. The virtual comport appears. But I’m not ready to sew anything with me.

[zeits]

lprotYes, than to sew something - it is clear, it is normally written in the cap. The question is - WHAT to sew! I assume that you do not have DualOS, then the Android firmware from version 32 of DualOS, v.1 should come up.

[lprot]

Zeits @ 08/13/2016 10:43

Yes, what to sew is understandable

It is not clear since I have a version on MTKhttp: //www.ondaforum.c...-series-tablet-models/

[zeits]

[email protected], 12:31

I have a version on MTK

Well, well, then you are not here, here is the topic of devices with a Quad Core 64bit Intel BayTrail-T Z3736F Processor processor, completely different technologies for MTK ...

[lprot]

In general, I figured out with him. Prots in it MT6582 firmware from here with half a ping wenthttp: //www.ondaforum.c..../97-v919-3g_v10_v1rar/Now after the firmware it does not turn on :(

Update. In general, I formatted it in SP Tools. I downloaded the button Download. I started to turn on for a long time, hung on the flashing ONDA inscription, then peeped three times and booted :) Not included due to discharge. He overnight discharged into the trash. Maybe someone will benefit from my experience.

Post has been editedlprot - 13.08.16, 13:48

[lprot]

In general, the adventures with this tablet are not over. Since it is Android 4.2.2, I tried to flash the firmware from V919 3G V3 there. It was successfully sewn and I received full brik, since V1 and V3 are incompatible to PRELOADER.

After studying the topics on the restoration of bricks, I decided to look for a testpoint, and found it.

On the V919 3G 16Mb V1 MT6582 to call testpoint, you need to connect a USB cable, then hold down both volume buttons and press the reset button, then release the reset.

After that, I installed the MTK DA VCOM driver and patched my native firmware using SP Tools 5th version. The native 3rd stitch refused with a DRAM error.

I think my experience will come in handy, and put my messages in a separate topic as there is a V919 3G Air 16Mb V1 and V3 both built on MT6582 with different firmware.
V1 - 4.2.2
V3 - 4.3 (Jelly Bean)

[lprot]

After restoring the firmware after formatting, IMEI crashed.
I tried to restore it with the help of Maui META ver 9.1604.02.00, but I could not connect it.
Restored it with SN Writer SN_Write_Tool_v2.1504.00. I also wanted to restore the serial number that became 123456789ABCD, but it failed, because it swears that the SN that I enter does not correspond to IMEI :)

By the way, if anyone knows where to find the original IMEI, tell me.

In general, after recovery, everything works OK, and the camera and WiFi and 3G. There was an inconspicuous protective film on the camera. I took it off and it was better to shoot it.

The device rutanul using iRoot. I put KingRoot. Then I installed Total Commander and deleted all Chinese from / system / apps.
Entered Google Play and put all the necessary programs.

It seems like there is nothing more to write about him, everything works :)

The memory in the device is organized as follows. 1Gb internal, 12Gb virtual SD. There is a slot for microSD. If you put the SD, in the settings you can configure the storage on the external SD.

From / system / app, be sure to remove dmclient.apk. He displays all the ads.
google music - also deleted as it is hanging.

Post has been editedlprot - 14.08.16, 12:54

[lprot]

Repacked the memory with Scatter_2_Editor.exe (Made all 16Gb internal), formatted it again and flashed it with SP Tools. After the firmware returned to the factory IMEI :)

On a new one, put TotalCommander and QuickEdit. Edited /system/etc/vold.fstab Did this:

## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##

#######################
## Regular device mount
##
## Format: dev_mount<label><mount_point><part><sysfs_path1 ...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path>- List of sysfs paths to source devices
######################

## Example of a standard sdcard mount for the emulator / Dream
# Mounts the first usable partition of the specified device
#dev_mount sdcard / storage / sdcard0 emmc @ fat / devices / platform / goldfish_mmc.0 / devices / platform / mtk-msdc.0/mmc_host
dev_mount sdcard2 / storage / sdcard0 auto / devices / platform / goldfish_mmc.1 / devices / platform / mtk-msdc.1/mmc_host
## Example of a dual card setup
# dev_mount left_sdcard / mnt / sdcard1 auto / devices / platform / goldfish_mmc.0 / devices / platform / mtk-sd.0/mmc_host/mmc0
# dev_mount right_sdcard / mnt / sdcard2 auto / devices / platform / goldfish_mmc.1 / devices / platform / mtk-sd.2/mmc_host/mmc2

## Example of specifying a specific partition for mounts
# dev_mount sdcard / mnt / sdcard 2 /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1

# usb otg disk
dev_mount usbotg / mnt / usbotg auto / devices / platform / mt_usb / devices / platform / musbfsh_hdrc

After that, it rebooted and the external SD card on 32Gb became Internal SD (USB).

Chased again for viruses Malware Bytes. Found 1 more malware: /system/apps/XBPK.apk

The device began to fly :)

Post has been editedlprot - 14.08.16, 22:53

[CopperNickel]

ONDA 919 3g V1 firmware came up to my MRMD974 tablet. Mateboard Elink mr978 D3 V9.

[AlexanderL]

M

Topic is closeddue to the lack of user activity.
If you want to add something, clarify, etc. press the buttonand specify the purpose in the comment.