> Important!

We strongly recommend to familiarize withRules section "Android - devices"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Lenovo P2 - Discussion | Smartphone 5.5



Rep: (315)
DiscussionLenovo P2
PictureLenovo P2
Description | Discussion пїЅ | Purchase пїЅ | Accessories пїЅ | Marriage and Repair пїЅ | Firmware пїЅ | Unofficial firmware пїЅ | MIUI firmware пїЅ | power usage пїЅ | Camera talk пїЅ | Modification and decorations пїЅ | Lenovo Fans Club пїЅ | Lenovo P2 Owners Club пїЅ

Specifications
Screen: 5.46 "Full HD, pixel density 403 DPI, support for multi-touch (10 simultaneous touches). Protective glass Corning Gorilla Glass 3 (2.5D).
CPU:
Qualcomm Snapdragon 625with an integrated X9 LTE ​​modem with 4G + support, which provides a download speed of 150 Mbps (8 Cortex A53 cores with a frequency of 652 MHz to 2.016 GHz. 14 Nm FinFET technical process. 550 MHz graphics accelerator with OpenGL ES support 3.1 and Vulkan extensions).
RAM (RAM): 3/4 GB, LPDDR3 933 MHz.
Built-in memory: 32 GB / (64 GB - Chinese version) + MicroSD (support for memory cards up to 128 GB).
Sim cards: 1 slot - nanoSIM, 2 slot - nanoSIM or memory card. 1 radio module
Communications:
Wi-Fi 2.4 / 5 GHz
4G network (LTE Cat.6 - 300 MB / s): TDD LTE Band 39/41 (for PRC only)
TDD LTE Band 38/40
FDD LTE Band 1/3/4/5/7/8/20/28
CDMA 2000 850 (for PRC only)
TD-SCDMA TD2000 / TD1900 (China only)
CDMA 850 (only for PRC)
Navigation: QualcommВ® IZat в„ў Gen8C module (GPS / A-GPS / GLONASS / BeiDou).
Cameras: The main - Sony IMX258 : contains 5 lenses made of composite material, dual LED flash. Frontal - OV5695 .
Operating system: Android 6.0.1 (VibeUI 3.5 shell), Android 7.0.
Audio: 1 1.5 W speaker (85 dB), TI TAS 2555 audio amplifier. Built-in Qualcomm Aqstic central audio processor that can play audio files up to 192 kHz / 24-bit. Dolby 5.1 support.
Battery: 5100 mAh Non-removable lithium polymer. The technology of fast charging "Turbo Power" fully complies with the specifications of Mediatek Pump Express Plus 5V / 7V / 9V / 12V-2A (10 hours of operation of the device after 15 minutes of charging).
Missed events indicator: There is (LED - 7 colors to choose from).
Sensors: Gravity, linear acceleration, magnetic field, orientation, vector rotation, movement, step counter, step detector.
Ports: 3.5 mm headphone jack.
Specific radio absorption coefficient SAR: 0.816.
Equipment (may vary depending on the region): Screen protector, black headset, charger, cable, OTG adapter, envelope with documentation and a clip for a SIM card tray.
Additionally:
Fingerprint scanner supports gestures. Onscreen buttons. All-metal case. Operating time from one charge - 12-15 hours of screen operation for 2–3 days. (mainly when using 3G-4G networks). Noise Reduction (2nd microphone). Dedicated key to go into power saving mode. The "Fluence HD noise cancellation" technology improves the quality of the reproduced audio stream due to "smart" noise removal "on the fly" at the hardware level.VR mode support(the virtual reality).
Presented at IFA 2016 on September 1, 2016. The date of sale is the end of autumn 2016.
Available colors are graphite gray, golden champagne.
Photo
Attached Image

Reviews
Useful
Instructions
Increase the volume and sensitivity of the microphone
Solving the problem of synchronizing Google contacts on the stock firmware
Add the missing icons in the curtain on the firmware with the region RU | Method number 2(root required)
If the network lost the first SIM card slot
If you do not want to make a "sandwich" of the SIM card and memory card
If when connecting via Bluetooth, the authorization code entry window does not appear
If the scanner does not recognize the second and subsequent prints
Change the priority of application notifications
Instructions for unlocking a Google Account (FRP Lock)
About fingerprint unlocking
Contacting the SC about loosening screws / How to loosen yourself
Turning off the pattern request before downloading(Safe Start)
Displaying the name of the caller in 2-3 lines (requires root)
Solving the problem of Google Play (Market) with the lack of certification
Non-mechanical way to turn off / lock the screen and then unlock it with a scanner without requesting a pattern / pin
A way to improve the camera to record 4K video
Those who complain that the SIM card is not visible
Deleting a portrait mode icon in the status bar
aptx on stock firmware with custom recovery
Improving camera performance (requires root)
What you need to know about Android 6.0 smartphone users Lenovo
Emergency reboot of the smartphone when it hangs
Authentication of Chinese devices by imei
Replacing Google services to facilitate the system
Disable (freeze) applications without root
Significant improvement in sound quality transmitted via Bluetooth
Instructions for enabling / disabling the necessary band LTE

Programs
Additional Information
There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.

Post has been editedVolkodav. - 14.08.20, 01:25
Reason for editing: Powered by the new standard section



Rep: (2)
Alnem11 @ 02/18/2018, 17:48*
Look like a compass behaves in this program

Absolutely also leads. I also had this glitch. Simply no data from the sensor. You can check for example on the Sensor tab in the CPU-Z sensor there, but it does not receive any data from it. Current reboot. Jamb firmware most likely



Rep: (2)
Good afternoon, dear members of the forum! Has anyone encountered a problem not making a parallel call to the second sim card when conversing on another? Before that, there was SAMS S4 (also with one radio module), a parallel call to another SIM card was held during the conversation, but for some reason he does not pass on Lenovo. I recognize about the missed if only I tell about it. Although the settings "parallel call" is set. Andryusha 6 stock, bodies - European. Thanks in advance for the answer!

Post has been editedSylvesterS - 19.02.18, 12:14



Rep: (1102)
Sylvesters @ 02/19/18, 17:54*
with one radio module
This is possible, provided that both operators work in one range.

Post has been editedabubekerovark - 19.02.18, 12:04



Rep: (1102)
FAQ

Read:
- became the owner of this apparatus, where to start?
WITHtextbook.

- I can't stick a protective glass, constant bubbles, what to do?
The problem is in too strong tightening bolts at the factory, because of this front glassA little is coented. The solution to the problem is to remove the plastic inserts, pre-heating with the hairdryer (without fanaticism) and weaken the screws.

- Is it possible to use the NFC module as a keys from the intercom?
CanOnly instead of some plastic key chains operating at a frequency of 13.56 MHz. Contact keys and keys at a frequency of 125 kHz using NFC cannot be imitate

- Will your smartphone work with communication frequencies in the region (2G-3G-4G network)?
Information on various modifications of the smartphone in terms of supported frequencies is representedhere.

- What modifications of the smartphone exist?
At the moment, it is known about the version for the Chinese region P2S72 with 4/64 GB of memory and the global version of P2A42 C 3 (4) / 32 GB of memory (with a trimmed version of the VibeUI shell). In the Chinese version there is no support for LTE Band 20.

- How to put your melody for a call?
Like this.

- What type of charger is suitable for smartphone?
You can charge a smartphone by any charger, however, to start a quick charging TURBO POWER (two zippers in the status bar), you must charge the charger with the following indicators: 5.2V-2A; 7V-2A; 9V-2A; 12V-2A. But not all chargers support fast charging on our device.Example


- Is it possible to disable fast charging?
There is no shutdown function in the settings, however, you can charge the smartphone with any charger without the support of a quick charging or when charging, leave the device with an enabled and screensaver - fast charging will not start.
ATTENTION: When using a complete charging device for charging devices without quick charging support, there is a risk of damage to the device due to the supply of non-standard (increased) voltage in the event of a power controller failure.

- In the firmware there are new functions of Smart Scene and Secure Zone Management, what is it?
Answerhere.

- In the smartphone, use-screen buttons are used, can I turn them off?
Yes, in the settings. The print scanner button supports gestures that are able to replace the background buttons.

- How much does the battery hold on this device:
The time of work from one charge is a very individual parameter, below shows the averaged data (mostly the operation time is determined by the time of screen operation):
1) In the mode of tight active use with the enabled data transfer of 4G, games, movies, keeps approximately 2 days. and 9-10 hours. Screen work.
2) Without a SIM card in cyclic video playback mode up to 20 hours. With SIM cards and data transfer of about 17 hours.
3) In navigator mode: -10% / h. With the screen on maximum brightness and data transfer, 10 hours. Navigation is provided.
4) Data transfer after 4G: -10% / h.
5) With a standard scenario of use, without games, the use of the Internet is mainly through 3G, calls, etc., the smartphone lives about 10-15 hours. Screen operation for 3 days.
6) With a simpler use, the screen time of the screen can be more than 12 hours.

- Does the NFC module work?
Yes, reads and records the top of the Troika (through the application of my pass), reads the map of the plantain (through the applicationPlaintainReader). Also, the NFC module can work with bank cards and labels. Supports Android Pay.

- Does Bluetooth-Gamepad work?
Works, but on the drain there are problems with it:1, 2, 3.

- I do not respond to pressing the bottom of the screen, about 2 mm (when hiding the onscreen buttons), what to do?
This is not a marriage, software flaw or feature of the device.

- I started bothering, the application shortcuts, when removing one, all are removed.
Solution: We go to the settings / special / double profile, turn off, then go to the settings / applications / Lenovo Launcher / memory and click "Erase the data".


Post has been editedabubekerovark - 24.04.18, 12:08



Rep: (0)
All hello. Maybe someone will tell how to remove this notice
Attached Image


Post has been editedgrafom - 20.02.18, 13:40
Reason for editing: Pictures under spoiler



Rep: (155)
ARTYOM12 @ 02/20/2018, 12:36*
All hello. Maybe someone will tell how to remove this notice

Settings - Center notifications.

Post has been editedHardin751 - 20.02.18, 13:45



Rep: (0)
And in the curtain how to remove



Rep: (287)
ARTYOM12 @ 02/20/18, 12:53*
And in the curtain how to remove

As a message comes - a long press on it in a curtain and executes the transition to settings.



Rep: (155)
ARTYOM12 @ 02/20/2018, 12:53*
And in the curtain how to remove

Looking in any direction.
But so that this notice does not appear at all in the curtain, it is impossible to make regular means. Is that turning off the recording of conversations.



Rep: (1131)
JOMPHBOOB @ 02/20/18, 13:26*
Judging by the written data just QC2.0 - what do you confuse the people?

The voltage and current of our charging may match the Quick Charge charging, but they cannot charge quickly, because the controller is different. That is, it is necessary that not only Volta and Amperes coincide, but also was a Pump Express controller.



Rep: (376)
JOMPHBOOB @ 02/20/18, 13:26*
Judging by the written data just QC2.0 - what do you confuse the people?

In this case, you confuse the people, because your conclusions are based only on the similarity of some parameters of charging QC 2.0 and MTK-PE.
In the FAQ-E P2 Uv.* abubekerovark That's right wrote.
Little simple similarity of parameters, it is necessary that the chip in the charger itself answers all the requirements of the power controller in P2, which in turn is sharpened under the system of fast charging MTK-PE (Pump Express).
Although it is impossible to say that there is 100% MTK-PE there, because the voltage does not rise above the 12V when fast charging.
But the closest system of rapid charging at P2 is precisely to the MTK-PE system.
At one time, I spent comparative testing of charging P2 with different chargers (Here you can visually familiarize yourself with my experience. ).
In that case, oddly enough, but the chip in the charger QC 3.0 from the LEECO LE Max2 smartphone was switched to the power controller at P2 and the fast charge on the P2 was not enough from the completed charger.
But this does not mean that all the chargers from QC 3.0 will also give a quick charge on P2.
Later, my friend tried to get a quick charge of the same chargers from the same Leeco Le Max2 in his P2, and it did not have a quick charging mode.
It is inclined to assume that in my case it was a Lotter coincidence of that sample of the CC 3.0 charger from Leeco Le Max2, which I used on my video.
I don't have a different explanation - why I have a quick charge, but there is no familiar, and this is with almost absolute similarity and apartments (P2 = P2) and chargers (QC 3.0 from Leeco LE Max2).
Later I acquired on Alihere is a charger As a spare, to pick up P2 charging at work in case of delay there for several days.
But he, alas, does not give a quick charging on P2 - it charges only at 5V / 2A, although theoretically possible and could.
This is all I write to the fact that it is impossible so superficially to endure verdicts on the system of rapid charging at P2 and the more accuse others with their erroneous conclusions.

Post has been editedLenovoUser55555 - 20.02.18, 15:04



Rep: (20)
Good day! I recently use this device, I still do not know all the subtleties. Tell me please. Why in this device installed two copies of some applications? From the visible, this is the camera and playing market. Each of these applications separately requires permission to access some functions of the smartphone and the play mark requires authorization. On one copy of the playmarket, the authorization is passed, on the second copy requires data entry or registration. What is it generally and why is it necessary? Or is I only so?

Post has been editedVaguss - 20.02.18, 15:10



Rep: (1102)
Vaguss @ 02/20/18, 21:09*
What it is
Settings - Special - Double Profile. Next disable everything double, figure it out



Rep: (1013)
M
* energyman2505, * LenovoUser55555, * Fristin, Messages moved to Lenovo P2 - Accessories



Rep: (2236)
* alibaster2, * aleksgrayvoron
M



Rep: (2)
Please tell me, and where in the settings you can put the time in the line of notifications with seconds? Before that put. Then they disappeared and even kill can not find again. Could not disappear, since nothing updated ...


* Vaguss , This is a double profile function. As you answered your question for the same playmarket, you can make a second profile with another account (mail). Or for example, Vaiber or leads to put duplicates with other phone numbers, and they will work in parallel as on different phones

Post has been editedSavec71 - 21.02.18, 12:04
Reason for editing: Extra



Rep: (103)
Savec71 @ 02.21.18, 11:03*
Please tell me, and where in the settings you can put the time in the line of notifications with seconds? Before that put. Then they disappeared and even kill can not find again. Could not disappear, since nothing updated ...

In the header there is a link "Deleting the portrait mode icon in the status bar". There.



Rep: (180)
Hardin751 @ 02/20/18, 15:01*
But so that this notice does not appear at all in the curtain, it is impossible to make regular means. Is that turning off the recording of conversations.

But you can makeNon-standard

Post has been editedChukatyi - 21.02.18, 19:53



Rep: (2236)
* gobsagil * traut1957,
M
Your posts have been moved to.Lenovo P2 - Modification and decorations



Rep: (211)
How to set up autowarity (engineering menu or what is the other way), for the sensor does not respond at all to its change? The phone is not routing.

Post has been editedmr fixed - 22.02.18, 19:47


Full version    

Help     rules

Now: 14.01.21, 21:57