Lenovo P2 - Discussion | Smartphone 5.5
Hello! It can be useful to someone.
family ordered the phone, so that the discharge came immediately to zero. phone charging does not want to, sometimes only bzykaet vibration, the computer does not oprdelyaetsya.
I dismantled on 3.2V battery. I tucked charger to the battery connector without battery 4.1-4.2. then connect the battery charge went on the screen. shorter as some treth redmi history
family ordered the phone, so that the discharge came immediately to zero. phone charging does not want to, sometimes only bzykaet vibration, the computer does not oprdelyaetsya.
I dismantled on 3.2V battery. I tucked charger to the battery connector without battery 4.1-4.2. then connect the battery charge went on the screen. shorter as some treth redmi history
I do not use power-saving switch. Today moved the switch and there one can see how the LED or just colored dot. Who knows what it is? I use the phone a half years: D
artem2005, what it means to a different current? More less? So what? Current is summed up. 5 + 5 + 5 and 5 + 10 like as is equal to 15. According to claim.FoDe @ 10.05.19, 22:37
So what?
I've not even know, to comment on your knowledge of physics or not ...
Read what I wrote carefully!
Hello. Looking for a solution for Volte not see the answer to questions,
1, if RU Change region on what else, then there is an option that will work Volte?
2 Properly understood, most likely in the Russian firmware first paragraph does not work, because there is no setting for the operators?
If you do not want to flash custom firmware that is flashing on the region with a working Volte and with the support of the Russian language in the phone menu?
What can we lose, I ask this firmware?
1, if RU Change region on what else, then there is an option that will work Volte?
2 Properly understood, most likely in the Russian firmware first paragraph does not work, because there is no setting for the operators?
If you do not want to flash custom firmware that is flashing on the region with a working Volte and with the support of the Russian language in the phone menu?
What can we lose, I ask this firmware?
aglov @ 11.05.19, 13:06
that is, the firmware on the region with a working Volte
See here:Lenovo P2 - Informal firmware (Post deinetod # 79732620)
P2 have one inserted SIM-card.
I began to notice that sometimes disappears mobile network.
However, she lost only under certain conditions: in a certain place, when the Wi-Fi, while activity on the Internet.
Typically, loss of short-term and inconspicuous. Furthermore, such it never happens when using mobile data (when Wi-Fi is off or inactive) or during a call. Well and it disappears only in certain places.
This may indicate that the phone is dying? Or is there reason in the mobile network coverage (for example, the signal is weak or overloaded sector)?
I began to notice that sometimes disappears mobile network.
However, she lost only under certain conditions: in a certain place, when the Wi-Fi, while activity on the Internet.
Typically, loss of short-term and inconspicuous. Furthermore, such it never happens when using mobile data (when Wi-Fi is off or inactive) or during a call. Well and it disappears only in certain places.
This may indicate that the phone is dying? Or is there reason in the mobile network coverage (for example, the signal is weak or overloaded sector)?
gory212 @ 30.05.17, 20:32
People, and anyone encountered problems when connecting to a 5Ghz WiFi networks?
I have a strange problem, sma phone allows you to create an access point to 5Ghz frequency and works fine, tested on the job with a working computer - super speed. Today, the hand reached configure router on 5GHz, connect and see it all of the devices, even an old laptop (>8 years old) and you do not see the network. Not at all. The strangeness is that someone in the house 5Ghz network phone vsyotaki sees, but not mine. Sin that the router brought from America, but such channels are exactly tezhe that supports the default phone (36, 40, 44, 48, 149, 153, 157, 161). In general enough, I will still experimenting ...
Who can faced may have some option to see / change the frequency of the service menu, for example,
I have a strange problem, sma phone allows you to create an access point to 5Ghz frequency and works fine, tested on the job with a working computer - super speed. Today, the hand reached configure router on 5GHz, connect and see it all of the devices, even an old laptop (>8 years old) and you do not see the network. Not at all. The strangeness is that someone in the house 5Ghz network phone vsyotaki sees, but not mine. Sin that the router brought from America, but such channels are exactly tezhe that supports the default phone (36, 40, 44, 48, 149, 153, 157, 161). In general enough, I will still experimenting ...
Who can faced may have some option to see / change the frequency of the service menu, for example,
The same problem, and tested on two phones lenovo p2 both at the first connection to the wi fi 5g found my network, but now both of her invisible, only once was able to connect. (One was with the firmware, the Chinese, and the other with international). Just in the distribution of possible distribution of 5g.
Checked reset to the factory did not help.
But I do not try to reflash.
Not solve the problem ???
serik.uanasov, Router Keenetic Air 1200, always instant connection to 5Ghz and stable relationship, never had no problems.
My sometimes (rarely) not immediately sees home network 5 Hz, but generally no problems observed kinetics ultra router
Post has been editedCretega - 15.05.19, 23:18
Post has been editedCretega - 15.05.19, 23:18
European phone, router netis 2780. Phone firmware on one for more than 2 years. 5g wifi hidden SSID Broadcast, the region on the router is specially exposed USA to expand the channels and signal strength. The body is connected automatically without any problems ...
serik.uanasov @ 13.05.19, 19:43
Not solve the problem?
exposed region of China to automatically passed when scanning an access point.
mazzy85 @ 16.05.19, 09:18
region on a router specifically billed USA to expand the channels and signal strength
dfs does not interfere?India is better =)
Post has been editedJomphboob - 16.05.19, 17:20
Jomphboob @ 16.05.19, 18:19
dfs does not interfere? India is better =)
mazzy85 @ 17.05.19, 5:49
than it might interfere with
depends on the implementation of the wireless router .. the idea on channels with DFS he has to stop to scan and all clients fall off during this time.
mazzy85 @ 17.05.19, 5:49
better than India
no limits - neither DFS nor power.
but we must remember and supported channels your customers - our Lunow not want to work on the 169, 173 (?).
Post has been editedJomphboob - 17.05.19, 07:38
Hi, can anyone know what it is. Gone mobile internet speeds of 7 and a maximum of 40. At the same Simcoe other phones give 80-90. Latest firmware runoff.
Post has been editeddaltar - 19.05.19, 04:40
Post has been editeddaltar - 19.05.19, 04:40
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement