[X]Assistant

[duke.ukr]

Nomi C10102 Terra + Black - Official firmware
Nomi C10102 Terra +
Discussion пїЅ | Firmware пїЅ

Drivers and Utilities

SPD_Upgrade_Tool_R4.0.0001 utilitytook here
Drivertook here
Drivers
Windows XP driver
Windows 7 x64:

Official firmware

Off site firmware herein the support tab. They refer to 2 firmware:
Nomi C10102 Terra + V1.0 11/18/2015 -This did not flash
Nomi C10102 Terra + V2.0 06/14/2016 -took this

Instructions

What was required.
1) Turned off the tablet, connected Data cable, it turned on, drew a battery and showed the charging process.
2) Install the SciU2S.INF driver from the x64 folder onandroid adb interfacewhich was with an exclamation mark, see the screenshot (important note! Windows determined the driver without a digital signature installed it, but did not allow it to be used, for this reason it rebooted the F8 PC into the mode without checking the digital signature)
After installing the driver, remove the USB cable.
3) Launched ResearchDownload.exe clicked on the 1st gear and selected the firmware and clicked on Start Downloading (3rd button)
4) Now the most interesting thing on the tablet is pressing "Volume -" (Vol down) (in your version, you may need "Volume +" Vol up) thisread hereAnd as soon as I connected the tablet, the firmware started.
I even stupid and did not know whether to let go or not the button "volume -" and kept 200+ seconds: rolleyes :.
5) When ResearchDownload wrote Passed I exhaled. He took out the lace. Began to press the power button, nothing happens.
I pressed the Reset button for 5-6 seconds and the tablet booted up, clean and without ads (viruses), but the assembly writes about the device151750o.O. And according to the logic should be152091.

miscellanea

The tablet is not mine, I have already given it. What he knew wrote.

Screenshots

There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editeddraiv88 - 06.09.18, 13:42

Reason for editing: Windows 7 x64:

[poltava2]

Good day! Guys, tell me who can, the tablet is almost a year, it works perfectly, but recently such a problem, WI-FI has started to disappear, that is, it does not. gone and so constantly ???????

[duke.ukr]

Like these drivers.

Attached files

drv.7z(71.65 KB)


Post has been editedvaalf - 28.11.16, 11:56

Reason for editing: raised in the topic header

[krokofon]

They dragged this one, dirtied by advertising, and made mistakes. I flashed the proposed firmware and got IMEI (null). In principle, not scary (in theory), but all the information remained until Google accounts and classmates, the same version remained 151750. Hard reset through the recovery does not help, everything is in place. Regarding IMEI, the version of the radio module is not installed. Still differences, here is laid out software for the SC7730 and I have the SC7731, perhaps this is critical.

[Slesar santexnik]

Good afternoon! I picked up a virus on the tablet, I want to flash it, but now I have a problem, I can’t download the Utility SPD_Upgrade_Tool_R4.0.0001 wrote here it says - you don’t have Go to homepage.

[duke.ukr]

SlesarSantexnik @ 08/30/2016, 10:02

SPD_Upgrade_Tool_R4.0.0001 utility

in the attachment

Attached files

SPD_Upgrade_Tool_R4.0.zip(2.53 MB)

[4aroDAY]

Unable to download flasher
While writing the message, already posted;)

Post has been edited4aroDAY - 31.08.16, 11:59

[vaalf]

M

We move to subsection Other brands

[olgand]

Help to restore the "brick"! After an unsuccessful flashing, the tablet, when turned on, emits only vibration. When you combine the volume buttons with ON, the same.

[Vlad_Nav]

After returning to the factory settings, a constant reboot ... how can I reflash it? In the service center there is no possibility to carry it. the tablet computer does not see

Post has been editedVlad_Nav - 15.09.16, 18:50

[eddy_alfa]

They brought a brick, did not turn on, threw the firmware file into the RD, pressed the start, connected the tablet with the "Volume -" button pressed, went to the phone, and sat with the button pressed for 280 seconds. It poured normally, turned on, it works. In general, the spredtrumes are surprisingly easy to lift from bricks, even if the firmware was broken in half, reinstalling is not a problem. : rtfm:

[gcib]

Windows 8 x64 - the driver does not accept. What to do and how to be?

Post has been editedgcib - 22.09.16, 15:23

[olgand]

eddy_alfa @ 09/22/2016, 09:28

They brought a brick, did not turn on, threw the firmware file into the RD, pressed the start, connected the tablet with the "Volume -" button pressed, went to the phone, and sat with the button pressed for 280 seconds. It poured normally, turned on, it works. In general, the spredtrumes are surprisingly easy to lift from bricks, even if the firmware was broken in half, reinstalling is not a problem. : rtfm:

What is RD?

[pavel_ga]

Thank! Everything turned out today did this "tablet" .... It was sewn the first time ...

[fanat1klas]

I stitched with difficulty! It was very difficult to install drivers on the PC and I had to rotate the tablet so that I could decontaminate the tablet as it didn’t wake up, reboot the button permanently, holding the button held for 432 seconds))) 15th year firmware

[NeSmik]

The nomi turns on on the screen saver and everything, when discharged, you can see the blue charge battery as well as without reaction, you simply have a white screen in the recovery, the computer determines charging time as "Gadget ..." and then as an unknown device which drivers did not install In the update, "either did not find it suitable, the flash driver does not see it accordingly, help what can I do?

Posted on 10/19/2016 13:27:

Clamps the power button, reboots, selects and then again and blue background forever, then just a white screen may appear in time

[qualqua]

NeSmik,
Bro I have the same problem, did you manage to solve the problem?

Post has been editedqualqua - 28.10.16, 11:25

[ibragimi]

Tell me this firmware and instructions for this device Nomi a10102?

Post has been editedibragimi - 30.10.16, 12:24

[angry_user]

It means so:
I stitched this unit according to the instructions of the respected duke.ukr, and I want to add my 5 kopecks:
- you need to press the volume - and do not need to hold;
- after all, it turns on by the power button.

[maximichks]

Guys with a 7 32 bit driver help, delirium turns out and with digital help off it is stupidly set

[maximichks]

working driver for win7 (the tablet is successfully flashed) ... maybe someone will come in handy, of course it is installed without a digital signature.

Attached files

Spreadtrum CPU USB Driver.rar(243.61 KB)


Post has been editedmaximichks - 09.11.16, 13:24