[X]Assistant

[ivanvias]

FZCAM R2 - Discussion

A photo:

Description:

• WIFI IP camera with night view
  
• Support Plug & Play (P2P), no need for DDNS, no need for port mapping.
  
• Simple management and setup, through the application on the phone. Supports iOS, Android operating systems.
  
• Support ONVIF protocol
  
• MicroSD support (MicroSD card file system, must be in FAT32 format),
  
• Support remote playback. (Note: 32GB SD card lasts approximately 3 weeks).
  
• Alarm: The ability to send a message about the movement to the phone using the installed application, does not send screenshots to the mail, but the camera resets the screenshots of the alarm to your cloud, you can watch from the application)
  
• There is a microphone and speaker. Using the application installed on the phone, you can voice a message that is transmitted through the built-in speaker in the camera.

Specifications:

Useful links:

Windows program

https: //onedrive.live...7B%21112&action=locate
The service nvdvr.net on port 5050 (cloud) is used. MVCMS connects either directly or via the cloud at 00000000.nvdvr.net:5050 (where zeros is the camera ID) Name and password is required, port forwarding is also needed to access from outside
Video writes fine, loses without crutches in any player. On the smartphone, you can view through the application, on the PC you can watch and download. The application itself in the market is called v380.

You can play with the camera seller 31101562 admin 3154

Data from media info on video

General
Complete name: C: \ Users \ admin \ Desktop \ RecFiles \ Rec1_20160718115221_A_1.avi
Format: AVI
Format / Info: Audio Video Interleave
File size: 10.1 MiB
Duration: 1mn 57s
Overall bit rate: 725 Kbps

Video
ID: 0
Format: x264
Codec ID: x264
Duration: 1mn 57s
Bit rate: 685 Kbps
Width: 1 280 pixels
Height: 720 pixels
Display aspect ratio: 16: 9
Frame rate: 25.000 fps
Bits / (Pixel * Frame): 0.030
Stream size: 9.56 MiB (94%)

Audio
ID: 1
Format: ADPCM
Codec ID: 11
Codec ID / Hint: Intel
Duration: 1mn 56s
Bit rate mode: Constant
Bit rate: 32.4 Kbps
Channel (s): 1 channel
Sampling rate: 8,000 Hz
Bit depth: 4 bits
Stream size: 462 KiB (4%)
Interleave, duration: 63 ms (1.59 video frames)

How to connect from scratch?
View RTSP stream
MVCMS_Lite - view video from PC
New PC software

• Before posting read the message Video section rules
  
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedmihadom - 31.01.19, 10:05

Reason for editing: New PC software

[tank_200]

Tell me, what actions take place when the camera triggers a motion? Sends a screen to the cloud? One? Then he starts writing a video and uploads it to the cloud?

[ivanvias]

tank_200,
Makes a screen and sends to the cloud. And he writes a video on the memory card. You can download only through the application under Windows and played without crutches. Youtube video chews fine.

[sepooh]

Something does not come out for me to see the image through the program for the computer (writes - video caching and that's it). On the phone, everything works. Tell me, how can I connect?

[ivanvias]

sepooh
Is everything set up correctly in the prog? Right on the line, right-click? There it was necessary to press the start.

[sepooh]

yes, everything set up. He accepts the login and password, but does not want to display the video in the program.
http://prntscr.com/c6fc5z
in the window like this

[ivanvias]

sepooh
What did you write in the address of the program? Internal ip or via cloud id? How to set up a program?

[sepooh]

Camera id (via cloud).
http://prntscr.com/c6h5aa
and how to know her inner ah-pee? (I can't find it through my search)

[ivanvias]

sepooh
And you did port forwarding? The internal type of the camera looks like the same router in the admin panel, or you can use the application to scan the network, in my opinion it is called fring for android.

[Pioneer2]

ivanvias
Tell me, what ports need to forward? I try to connect to the camera behind the router, I tried port 5050, but the video does not work. On the local network everything was fine.

[ivanvias]

Pioneer2,
For onvif 554 port. For prog 5050. If you are forwarding and are sure that this is correct, try asking your provider if they are blocking?

By the way, what type of connections are you using? On the Internet ip white or dynamic? If you use vpn. Ie after 1 address out 1000 users of your provider's network, then yes, maybe this is the problem.

Post has been editedivanvias - 17.08.16, 23:26

[Pioneer2]

After scanning the camera ports and monitoring network connections, it turned out that the MVCMS uses several ports for the connection: 554, 5050, 5051, 7050.
I threw them and everything shows :)

[Lamoboy]

Tell me, please, does the camera have a web-interface and does it give the video using any other protocols besides ONVIF, for example, RTSP?
My camera speaker noticeably clicks when it works. Does everyone have it? Can you somehow reduce the volume so that the speaker does not fonil?

[ivanvias]

Lamoboy
Webmoney is not. Onwif and rtsp supports

[Lamoboy]

Ivanvias @ 09/22/2016, 12:48

Onwif and rtsp supports

What does the link to the RTSP broadcast of the main and auxiliary stream look like?

The camera speaker begins to squeak more when it transmits data over WiFi (online viewing or downloading files from MicroSD). Looks like there are tips. Does everyone have it?

Post has been editedLamoboy - 22.09.16, 16:18

Reason for editing: added question

[ivanvias]

Lamoboy
rtsp: // ip / live / ch00_1

[Lamoboy]

Ivanvias @ 09/22/2016, 19:21

rtsp: // ip / live / ch00_1

Thank! This is the main stream address. Experimentally, I discovered that a poor quality stream is available at rtsp: // ip / live / ch00_0

So what about the dynamics, does it all rip or just me?

Post has been editedLamoboy - 22.09.16, 23:07

[ivanvias]

Today the application for the camera v380 has been updated. The Chinese did not sit idle, Russified, crooked, but the meaning is clear. The application to the camera connects much faster. Redesigned a little interface for the better. And the most important thing . Added the ability to download video from the camera through the application directly to your smartphone.

Post has been editedivanvias - 28.09.16, 21:32

[Lamoboy]

[email protected], 20:31

Today the application for the camera v380 has been updated. The Chinese did not sit idle, Russified, crooked, but the meaning is clear. The application to the camera connects much faster. Redesigned a little interface for the better. And the most important thing . Added the ability to download video from the camera through the application directly to your smartphone.

My application version 4.0.3 dated 09/14/2016 from the US AppStore has not been updated today, but it can download files from the camera. When downloading, by the way, the speaker starts to make noise like crazy.

I disassembled the camera, inside I saw the same thing as in the photo in the cap of this topic. The wires that go to the speaker and the wire that goes to the WiFi antenna lay in overlap. I laid them on different sides of the board and there was less noise, but they still exist. It seems that the cause of the noise of the speaker, this pickup from the WiFi-antenna. I wanted to wind the wires that go to the speaker with foil, but stopped on time, because I thought that the foil could short out any contacts on the board. I disconnected the speaker from the board as a temporary solution. Tell me, please, how, what and the better screening, so that pickups from WiFi do not create noise in the dynamics?

[Dr.St@lin]

Does everyone have it? When I make a recording from the phone in the application and then watch it, the video goes in an accelerated mode and plays without sound.
I try to connect toTo thisService but does not work.

Post has been editedDr.St@lin - 17.10.16, 20:06

[ivanvias]

comrades. if someone has not updated the camera firmware. do not update. the Chinese broke everything there. 10 minute videos writes wild size.

Attached images