Assistant
REPLY |
Blackview BV6000 - Firmware | MT6755 |
Message#1 22.07.16, 05:48 | |
Lomaster [offline] Group: Friendssavagemessiahzine.com Messages 6354 Check in: 11.01.14 Blackview BV8000 Pro Reputation: 1182 | Blackview BV6000 - Firmware Bv6000 Description | Discussion � | Accessories and spare parts � | Purchase � | Firmware � Rules section "Android - Firmware" K Attention! A warning! Disabling the "gloved" mode can "kill" the touchscreen, seeHERE checked on the version 82 BV6000_blackview_20170908 The screen has been replaced. Don't flash if you are not affected by this. This version only fixes the problem with the touch screen, what happened after replacing the new screen. Do not flash if you do not have a problem. Before the firmware, look at the version of the touchscreen! (dial in the standard dialer * # * # 114 # * # *) Official Android 7.0 Nougat Official ROM Download-Links DNS Store Firmware Attention! Firmware from blackview and DNS differ in a marking (section system), to sew in the Firmware Upgrade mode. Lightweight firmware based on 20181208 OTA update from 12/08/2018 and firmware under FlashTool (based on this update) Firmware 20180427_s12v55_jk_3m for FlashToolThe dump is removed from a clean phone after OTA update. Part of the firmware on G-Drive (Google-disk), Yandex, Mile folder OS7 OTA Update on I-Disk 20180104_s12v55_jk_3m.zip firmware for flashlight android_7 (20170414)link tomail update 7 of 14 04 2017https://yadi.sk/d/waSTiZw63H6fr5 Of.proshivka "local update" version V01_20161216 (OTA update) Link to Google disk, all parts of the updates of the 7th Andryukha. Attention, read to all! It's not strange but a custom recovery with a kernel from 0919 works (I do not know how correct it is?) on android_7, and the SuperSU installation also works through zip to get root-rights. recommendations: put on top of firmware 1025 through "local update" and highly desirable have stock Recovery .. so all other questions and options like "and if?" keep with you and experiment with the installation yourself. After firmware highly desirable make reset to factory settings, only in this way you can get maximum stability in the system. If after the update the connection does not work for you, you need to reset the settings to factory settings viastock recovery (no wipe via TWRP will help you) just after the rollback to6 Most likely will fly nvdata (the communication module is unknown), even resetting the settings did not help me, I was personally helped only by flashing the flash drive in mode "firmware/upgrade" downloadhelps complete clearEMMC in factory modeOfficial firmware Android 6.0 Marshmallow Official ROM Download-Links Before using the firmware for the USB flash drive, delete the fileChecksum.ini what is in the folder with the firmware Of 1025 for flashlight (on needrom) Of firmware (local update) under stock recovery or TWRP, from 20161025 recommended for installation Of firmware (local update) for stock recovery or TWRP, from 20161011(has bugs) Of firmware (local update) for stock recovery or TWRP, from 20160919 Of firmware (local update) under stock recovery or TWRP, from 20160704 Install from under the android (through a local update) otherwise it will not be installed. Of firmware V01_20160608 under flashlight Of firmware V01_20160812 under flashlight Of firmware V01_20160822 under flashlight All firmware on G-Drive (Google-disk), Yandex, Mile Custom firmware Android 9.0 PIE (while some functions do not work) Modified stock firmware from 12/08/2018 under FlashTool The firmware is a customized version.official firmware OS7 (Based on official firmware 20180330 _s12v55_jk_3m) 0919-1025 Light on G-Drive (Google Drive) Aerom V5_P9000_Port LineageOS_13(formerly Cyanogenmod 13) Topics for CyanogenMod 13 \ 12 RESURRECTION REMIX 5.7.3fromserg2327 RESURRECTION REMIX 5.7.3fromv9146913279 NOMU S30 AOKP"Unicorn" Fresh AOKR "Unicorn"dated 26-07-2017 User reviews about firmware Instructions, drivers, files, programs Before flashing, make a FULL backup! How to find out the current firmware version About the benefits of backup (05/06/14)read here SP Flash Tool The flash program for smart phones based on MTK. WwR MTKThe program works with ROM files (read from the device usingSP Flash Tool ), based on MTK processors. Important information, may no longer be relevant. As practice has shown, the firmware of our device using SP_Flash_Tool not safe! I do not know what it is connected with but for some reason, very often after flashing, the body goes into defense and does not react to anything! (does not react to buttons, the computer is not detected, even with the "+" clamped) He himself faced this problem three times already and several cases are described in the next "discussion" branch. If your body after the firmware does not react to anything, you will have to familiarize yourself with the instructions for disassembling the device and simply distort the battery, after which the body comes to life. (unfortunately there are no reset buttons on the body and all the tricks that I have tried have been tried by me — nothing else helps) In connection with this situation I advise everyone to useTWRP-recoveryfor the firmware of the device, it is able to flash the ".img" firmware files as well as back up almost all important sections, so I think this method is the safest. I advise you to use a flash drive only for the firmware of that sameTWRP-recovery After the end of the firmware, we pull out the cable from the body and reinsert it, wait for the battery to appear on the screen, after which we can disconnect and turn on the phone. I also want to remind everyone that in this forum no one owes you anything and no one bears responsibility for your actions either! All that you do - all at your own peril and risk! If the phone responds to the connection to the computer with the "+" button pressed Drivers and Utilities SP Flash Tool - MTK-based flash driver Chinese version of the USB flash drive(solves some problems) scatter for chinese firmwareMT6755_Android_scatter.txt(12.68 KB) scatter for DNS firmwareMT6755_Android_scatter.txt(12.69 KB) MTK_Auto_GizBeat_Chinaphonearena.rar(33.19 MB) MTK_VCOM-GizBeat-Chinaphonearena.zip(7.73 MB) universal pack of firewood under mtkMtk_Usb_1.04.zip(73.12 MB) driver for the USB flash drive (manual installation via the controller):Infs.rar(12.54 KB) so that TWRP doesn't fly, install this patch from TWRP (download TWRP right after the firmware), to remove the harmful file "recovery-from-boot.p "which restores stock recovery after system boot. CWM_Remove_recfromboot.zip(243.4 KB) ®Chamelephonprogram to restore imei MauiMETA Working with SoC MTK radio module (NVRAM editor) Read hereDO NOT sew in format / download mode if this is not absolutely necessary and you can work with NVRAM! HARD BRICKED + IMEI REPAIR + DOWNGRADE + TWRP + Root Tutorial (eng) forum instructions blackview.hk Complete instructions for flashing the device flashlight If after flashing the communication module crashes, perform a full reset (clearEMMC ) Full reset phone to factory settings (clearEMMC) through factory mode Explanation ofnvram and nvdata IMEI Repair Method Installing driver for SP_Flash_Too " Installing / flashing TWRP with SP_Flash_Tool how to upgrade solution To repair IMEI Partial solution of some problems (bugs) on android_7 solution with a call out call for 7 Rollback on Android 6 Solving the problem with touchscreen on 7 to view those. Har-ki device (touchscreen version) dial in a standard dialer*#*#114#*#* Root and Recovery TWRP 3.2.1 and root with core 20180918 and 08/27/2018 BV6000_RU (upd; 23-12-2018) TWRP 3.2.1 and root touchscreen works (version from 06/24/2018) TWRP 3.0.2 (if 3.1.0 does not work on new devices) TWRP 3.1.0 for 6 and 7 At the moment, root can only be obtained by installing a SuperSU or Magisk patch from TWRP Programs like Kigoroot kill the system, restore only with full firmware! getting root through Magisk Login to recovery TWRP 3.0.2 and ROOT themeSuperSU themeMagisk Attention! After TWRP firmware, you need to immediately boot into it (hold down the volume + and ON) If you do not do this, and boot into the system, then TWRP will be deleted by the stock recovery stock recovery from 7 (0414) For those who persist in waiting for the firmware under TWRP miscellanea Elimination of the phone's constant activity in the background on firmware 20161025 (relevant only for Ukraine) butanimatsiya in the style of BIOS About reassigning buttons. Activation of the melody selection function on each SIM card Install any program on the SOS button (only for android 7) Solving the problem with camera brightness edit buil.prop (camera brightness) Contactless payments in "Corn" on non-firmware (20160713) mod dialers with Russian letters Translation of some factory mode items (not Chinese recovery) Multiwindow mode on stock *#9646633# - entrance to the engineering menu Xposed Gravitybox about problems with touchscreen change button assignment Changed icons in the curtain, settings, dialer. For all questions of filling and updating the caps, The topic curator is always happy to help you.Digins. (Contact inQMS). Post has been editedDigins - 15.05.19, 10:35 Reason for editing: Android 9.0 PIE |
Message#2 20.06.16, 10:49 | |
TWRP [offline] Group: Curators Messages 3708 Check in: 21.02.15 Xiaomi Redmi 4X 3/32 Reputation: 4092 | TWRP 3.0.2forBlackview BV6000 : - based on Android 6.0 kernel kernel version BV6000_Blackview_V01_201609192016 年 09 月 19 日 星期一 09:28:42 CST:recovery.img(12.19 MB) - based on Android 6.0 kernel kernel version BV6000_Blackview_V01_201608312016 年 08 月 31 日 星期三 10:50:14 CST:recovery.img(12.18 MB) - based on Android 6.0 kernel kernel version BV6000_Blackview_V01_201608122016 年 08 月 12 日 星期五 19:52:10 CST:recovery.img(12.19 MB) Older versions - based on Android 6.0 kernel kernel version BV6000_Blackview_V01_20160713/ 2016 年 07 月 13 日 星期三 14:16:04 CST:recovery.img(12.17 MB) - based on Android 6.0 kernel kernel version BV6000_Blackview_V01_201606082016 年 06 月 08 日 星期三 09:50:55 CST:recovery.img(12.14 MB) Installation Install using computer and SP FlashTool:SP_Flash_Tool_exe_Windows_v5.1548.00.000.zip(43.3 MB) Block Map:MT6755_Android_scatter.zip(1.34 KB) Driver for preloader:Infs.rar(12.54 KB) GettingROOT ROOT get install from the recovery of this patch:UPDATE-SuperSU-v2.78-20160905010000.zip(4.77 MB) A preliminary backup is strictly required !! Stock Recovery from Android 6.0 firmware version BV6000_Blackview_V01_201606082016 年 06 月 08 日 星期三 09:50:55 CST:recovery.img(9.66 MB) from Android 6.0 firmware version BV6000_Blackview_V01_20160713/ 2016 年 07 月 13 日 星期三 14:16:04 CST:recovery.img(9.69 MB) from Android 6.0 firmware version BV6000_Blackview_V01_201608312016 年 08 月 31 日 星期三 10:50:14 CST:recovery.img(9.7 MB) from Android 6.0 firmware version BV6000_Blackview_V01_201608122016 年 08 月 12 日 星期五 19:52:10 CST:recovery.img(9.71 MB) from Android 6.0 firmware version BV6000_Blackview_V01_201609192016 年 09 月 19 日 星期一 09:28:42 CST:recovery.img(9.71 MB) Post has been editedjemmini - 20.09.16, 22:56 Reason for editing: added an assembly based on the firmware kernel dated 09/19/2016 -------------------- Xiaomi Redmi 4X 3/32 |
Message#3 10.07.16, 11:50 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 91 Check in: 07.11.09 Xiaomi Redmi 3S Prime Reputation: 117 | |
Message#4 10.07.16, 17:17 | |
Lomaster [offline] Group: Friendssavagemessiahzine.com Messages 6354 Check in: 11.01.14 Blackview BV8000 Pro Reputation: 1182 | Aerom V5_P9000_Port Download link https://cloud.mail.ru/public/GB9u/LLVMtpy1C in this version, libraries from stock firmware 0608 were used to launch and adapt That is why I advise you to sew only the system image to launch on new revisions, otherwise the firmware will not start updated firmware versions aerom_v5_new https://cloud.mail.ru/public/4EPL/8m6vZycwx during the transfer, libraries from stock firmware 0919 were used, therefore it fits all existing revisions! changes: cleaned up a bit of Google earned pressure sensor corrected battery capacity on "4200" Added the function to set the melody on each SIM card added software .. Launcher replaced by "Nova" aerom_0919 (test) https://cloud.mail.ru/public/MWdc/A7xkChu71 This kind of a mixture of stock 0919 and aerom based on aerom updated all Google services, Much removed or replaced by applications from runoff 0919 (in order to maximize the Google stripping applications) So far, I am working on this firmware, I post it with the aim of sharing a test and familiarization Attention! This is a test firmware version., so that various bugs are quite possible. Who has free time, please help in testing and identifying bugs instruction bug list write in a personal if you find something! 1) the "home" button does not work as standard, you need to get used to it or read at the very bottom, there is a solution 2) the flash itself works correctly but the flashlight works three times dimmer 3) compass does not work, pressure do not forget to show thanks to someoneDepflexfor the original product! also, special thanks to mateshnyakfor closed beta testing of the firmware, it was on his initiative that the firmware was posted in the subject! By numerous requests I will add a link to a useful post:as in the aeroma when the navigation bar is off, make the "home" button work Post has been editedserg2327 - 26.02.17, 15:08 Reason for editing: new test versions added |
Message#5 23.07.16, 05:41 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 50 Check in: 27.11.14 Reputation: 9 | tell people how to get in rekoveri? I clamp the "plus" and "on" but somehow it is loaded all the same into the droid.! |
Message#6 23.07.16, 05:52 | |
Lomaster [offline] Group: Friendssavagemessiahzine.com Messages 6354 Check in: 11.01.14 Blackview BV8000 Pro Reputation: 1182 | Login to recovery: on the body off we clamp the buttons"+"and"on"as soon as the logo-release button appears"on"but"+"keep on until we boot intorecovery if you see a broken robot and the inscription "no command", hold down the "on" button and press "+" once, we get into the drain recovery Post has been editedserg2327 - 22.12.16, 11:36 |
Message#7 23.07.16, 17:48 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 265 Check in: 06.06.08 Motorola Defy + Reputation: 9 | When I try to flash the UPDATE-SuperSU-v2.76-20160630161323.zip file from recovery, I receive a message Error: Invalid OTA package, missing scatter. Instalation aborted. ' What to do? Thank! ************************************************************************************ To myself and I answer. Recovery are different. I tried to zip the ZIP file from the Native Recovery (I was stitching it, I think it is custom). I understood this, I filled in the custom one and successfully completed the ZIP, in the course I received RTH. Super! RUUT konketed people. Post has been editedAVLsavagemessiahzine.com - 23.07.16, 18:19 -------------------- Samsung Galaxy S Wi-Fi 5.0 |
Message#8 24.07.16, 03:44 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 211 Check in: 02.11.10 Samsung Galaxy Note8 SM-N950F / DS Reputation: 12 | serg2327, about the firmware, the battery keeps flying away !!!! Of the glitches, it sometimes reboots and recently apk hangs during installation, but also (I really don’t understand the phone or the firmware), the microphone with the speakerphone can work and it can not) -------------------- Siemens A50->Siemens m65->Eten m600->Nokia n80->Iphone 2g->HTC HD2->Iphone 3g->Nokia n900->Iphone 4->HTC Senstation XE->Sony Xperia Z1->Samsung Galaxy Note 3->Blackview BV6000->Doogee S60->Samsung Galaxy Note 8, Nokia N900, HTC HD2 |
Message#9 24.07.16, 07:07 | |
Lomaster [offline] Group: Friendssavagemessiahzine.com Messages 6354 Check in: 11.01.14 Blackview BV8000 Pro Reputation: 1182 | driver installation forSP_Flash_Tool: So, before flashing the device, you need to install a driver for your computer"Preloader"to programSP_Flash_Toolcould work with the device! To do this, download the drivers from the header and install them, if suddenly it did not give any result and the flashlight still does not see the device, then download the driver for manual installation and do the following: open the device manager and connect the disabled body to the computer, at this moment in the controller a device like this should appear for a few seconds and disappear:you need to have time to catch it with a mouse and make a click with the right mouse button, select "update driver" there and specify the path to the previously downloaded driver and unarchive into a separate folder If the driver is successfully installed, the body should be determined by connecting for several seconds in the "Ports" tab like this:This means that the driver is installed and now you can use the USB flash drive! Post has been editedserg2327 - 13.03.17, 23:13 |
Message#10 24.07.16, 13:31 | |
Lomaster [offline] Group: Friendssavagemessiahzine.com Messages 6354 Check in: 11.01.14 Blackview BV8000 Pro Reputation: 1182 | installing / flashing TWRP using SP_Flash_Tool: Download the flash unit from the header (or from the flashlight theme) as well as the TWRP-recovery file and the scatter file by the link from the header, unpack the USB flash drive on the desktop. The TWRP file itself (recovery.img) is placed in the same folder with the scatter file. go to the folder with the program and run the flash unit, go to the "options" and set as on the screen:Next, click on the button"scatter-loading"and point to our scatter that lies along with TWRP-recovery, after which a block map opens in the USB flash drive on which the recovery section is marked, press the button"download"after that we connect the phone (turned off) to the computer and the process of the firmware will start (lasts 3-5 seconds):that's all! Post has been editedserg2327 - 22.08.17, 20:46 |
Message#11 25.07.16, 03:27 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 211 Check in: 02.11.10 Samsung Galaxy Note8 SM-N950F / DS Reputation: 12 | serg2327,I can not understand here .... as if in the original firmware something is eating .... it is discharging faster than on yours, even a new one ... for the sake of example, I took some kind of ancient charger ... on the original the device breaks out, but on your really infected! -------------------- Siemens A50->Siemens m65->Eten m600->Nokia n80->Iphone 2g->HTC HD2->Iphone 3g->Nokia n900->Iphone 4->HTC Senstation XE->Sony Xperia Z1->Samsung Galaxy Note 3->Blackview BV6000->Doogee S60->Samsung Galaxy Note 8, Nokia N900, HTC HD2 |
Message#12 25.07.16, 13:26 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 588 Check in: 08.09.11 Blackview BV6000 Reputation: 29 | |
Message#13 25.07.16, 14:12 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 158 Check in: 11.06.16 Reputation: 4 | Of firmware (update) for stock recovery from 20160704 install from under the android (via local update) otherwise it will not be installed Installation can anyone describe? There is no update from the cloud, where does this firmware come from? I have firmware 20160608 now. Post has been editedRodgers85 - 25.07.16, 14:13 |
Message#14 25.07.16, 14:23 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 588 Check in: 08.09.11 Blackview BV6000 Reputation: 29 | |
Message#15 25.07.16, 16:02 | |
Lomaster [offline] Group: Friendssavagemessiahzine.com Messages 6354 Check in: 11.01.14 Blackview BV8000 Pro Reputation: 1182 | LAPATUN, no .. I just returned the stock recovery, I threw it into the phone's memory, went into the system update / local update. And I chose the archive with the firmware ... this of the firmware was released specifically for recovery .. more precisely for those who updated by air on 20160630 and after that the network did not work. In short, this is a revised full-fledged firmware and not an update. I just didn’t find a description in it ... there are no descriptions anywhere .. they only mention the correction of a non-working network that was broken by the update from 20160630 Post has been editedserg2327 - 25.07.16, 16:12 |
Message#16 29.07.16, 04:33 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 294 Check in: 03.01.14 Reputation: 10 | Tell me, please, and can nvram be saved in this way? |
Message#17 29.07.16, 06:11 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 588 Check in: 08.09.11 Blackview BV6000 Reputation: 29 | serg2327, So the backup that was posted here can be flashed through twrp? Or a flashlight only? Post has been editedLAPATUN - 29.07.16, 06:11 -------------------- blackview bv6000-root-TWRP 3.0.2 |
Message#18 29.07.16, 08:56 | |
a guest [offline] Group: Users Messages 1 Check in: 16.07.10 Reputation: 0 | When connected to a computer, the phone sees 10 seconds and falls off, the installation of drivers is also 10 seconds and falls off. |
Message#19 29.07.16, 09:00 | |
Lomaster [offline] Group: Friendssavagemessiahzine.com Messages 6354 Check in: 11.01.14 Blackview BV8000 Pro Reputation: 1182 | When connected to a computer, the phone sees 10 seconds and falls off, the installation of drivers is also 10 seconds and falls off. it should be. ..in instructions as it is written! The body is connected for a few seconds in the firmware mode .. if no program picks up the body (for example, the same flasher), then it simply goes into charging mode ... everything is as clear as two and two very clear! on all mtk devices the same and no different Post has been editedserg2327 - 29.07.16, 09:03 |
Message#20 02.08.16, 20:56 | |
User [online] Group: Friendssavagemessiahzine.com Messages 95 Check in: 22.08.13 Samsung Galaxy Note9 Exynos Reputation: 6 | From the group Blackview to VK: We post the latest firmware version for the Blackview BV6000 smartphone dated 07/13/2016. https://vk.com/away.ph...&post=-100488567_11481 https://vk.com/away.ph...&post=-100488567_11481 Engineers fixed the wrong angle when watching a video through VR glasses or a helmet. The archive also contains the OTA file of the update of the previous firmware version. Added 08/02/2016 20:57: And one more message from there: For the geeks, we prepared a text manual and a video on the firmware of the Blackview BV6000 smartphone to the factory original firmware.https://www.youtube.com/watch?v=Kt3sx7HXbJc Firmware manual: https://vk.com/doc-100…&dl=05ad3db417bf35b6d4 |
Message#21 02.08.16, 22:58 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 95 Check in: 20.08.11 Blackview BV6000 Reputation: 11 | I wrote a request on the factory firmware with release-keys, a secure kernel and no / system / xbin / su on the official Blackview forum. In general, if the last two options can be changed by modifying boot.img and system.img, then without the source code of the firmware with test-keys, nothing can be done. P.S. Apparently, the most paranoid banking software developers use this instruction to determine if root is present:https: //www.netspi.com...lers/Print.aspx? id = 209 |
mobile version | Now: 05/19/19, 17:40 |