RoverPad Tesla Gravity 8.9 FHD - Firmware



Rep: (6)
RoverPad Tesla Gravity 8.9 FHD - Firmware
PictureTesla Gravity 8.9
Description | Firmware пїЅ

Drivers and Utilities

Official firmware
Android 4.2.2
Download (Yandex)

Unofficial firmware
Firmware from Pipo M7T Android 4.4.2
Download (Yandex)

Instructions
Detailed instructions for official firmware - Download
Detailed instructions for flashing from Pipo M7T -Download

miscellanea

Screenshots


Post has been editedSadowplay - 18.08.16, 21:01



Rep: (6)
Official firmware from Pipo M7T Android 4.4.2 running on Gravity 8.9
Sew through - RKBatchTool
Download (Yandex)

Post has been editedVladimir_71_RUS - 24.07.16, 14:48



Rep: (6)
File for the correct operation of the drivers NEO USBdriver V3.5 on Windows 10
Download

Post has been editedVladimir_71_RUS - 24.07.16, 22:36



Rep: (0)
Thank you for the Old. I subscribe to the topic. I would like to clarify - in fact, after flashing, - the tablet starts to work quicker and smarter? Or does not make sense to rock the boat?



Rep: (0)
Started under the instruction - it does not appear anything in the Device Manager. Did everything according to instructions ... I kept the EQF. Tried different holes in the computer and Planchet (host usb). It is included, shows charging. The computer is silent. YUSB checked. Work like.



Rep: (6)
It is not necessary to Host USB and regular USB, the Host is designed to obtain information on the tablet with external devices such as flash drives, and simple USB for connection to PC

On Android 4.4 works best but there are nuances given that this firmware from other manufacturers (which happens from time to time may restart itself)

If you can not run a firmware mode for the tablet, it is possible to do otherwise.
1 - Turn the plate forward until it is fully incorporated
2 - connect it to a PC via a USB-cable into the tablet insert the USB connector
3 - Run the program RKBatchTool.exe
4 - The program of Connected Devices should light purple
5 - Switch Push button and the plate should go in flashing mode

Post has been editedVladimir_71_RUS - 27.07.16, 00:20



Rep: (0)
I say the same - tried different holes, including and Host. The tablet does not appear. OC Win10 x64. I tried two entrances. Tomorrow I will try a few more - the good, I have a lot of them: rofl:



Rep: (6)
I apologize for taking so long lecturing video instruction work.
Can be found here -How to flash the tablet Tesla Gravity 8.9 FHD

Post has been editedVladimir_71_RUS - 30.07.16, 00:28



Rep: (0)
After flashing the screen no longer included. Illumination is. Pictures do not. To connect the computer and apparently even turned on, because power button acts as a lock and unlock.
It opens only as MTP device. Instructions with clamping Esc button is still not working. Shilsya through the Switch. Now FleshRom also does not see the plate.

In BatchTool does not appear today. What to do?

Post has been editedmrAnomalyy - 09.08.16, 12:46



Rep: (0)
I think we should try to flash again, but how can I throw it in the flashing mode?



Rep: (0)
Sews 4.4 out of hats. He became Pipo M7 Wi-fi. It determined only as MTP. I can not drive it in the firmware. Nowhere to be seen. MTP only. Driver tried to uninstall and reinstall - to no avail. When only connect to charge, without including - defines simply as "android" USB device. With him, too, no fraud is not rolled. o.O



Rep: (0)
made adb reboot bootloader. He appeared in Device Manager. However, the programs are still there.
Attached Image


Post has been editedvaalf - 10.08.16, 22:57
Reason for editing: Pictures under spoiler



Rep: (0)
So. All also use adb reboot bootloader - could finally see the device in Butch and reflash. Now it works. Thank the author of the topic.

It should be added in this way to cap raskirpichivaniya incomplete brick. : Rofl:



Rep: (0)
I looked throughAndroid system infoinfu about the tablet (previously sewn)
Operating system
UserAgent browser: Mozilla / 5.0 (Linux; U; Android 4.2.2; ru-ru; Tesla Build / JDQ39) AppleWebKit / 534.30 (KHTML, like Gecko) Version / 4.0 Safari / 534.30
Android ID: 86ae80c95dacf751
Hours: 5 days 2 hours 16 minutes 9 seconds
Time (no sleep): 1 day, 23 hours, 7 minutes, 26 seconds

Configurations
Font Scale: 1.15
Hard Keyboard Hidden: YES
Keyboard: NOKEYS
Keyboard Hidden: NO
Locale: ru_RU
MCC: 0
MNC: 0
Navigation: NONAV
Navigation hidden: YES
Orientation: PORTRAIT
Screen Density Type: HDPI
Screen Height DP: 1254
Screen Width DP: 800
Smallest Screen Width DP: 800
Screen Layout:
LONG_NO
SIZE_XLARGE
Touchscreen: FINGER
UI Mode:
NIGHT_NO
TYPE_NORMAL

information assembly
Version of Android: 4.2.2
Version: REL
API Level 17
CPU ABI: armeabi-v7a
CPU ABI2: armeabi
Manufacturer: rockchip
Downloader: unknown
Iron: rk30board
Radio: unknown
Platform: rk30sdk
Brand: rk30sdk
Device: rk30sdk
Screen: rk30sdk-eng 4.2.2 JDQ39 eng.root.20140117.120552 test-keys
Fingerprint: rk30sdk / rk30sdk / rk30sdk: 4.2.2 / JDQ39 / eng.root.20131211.120552: eng / test-keys
The owner: alex-System-Product-Name
ID: JDQ39
Model: Tesla
Product: rk30sdk
Tags: test-keys
Type: eng
User: root
Battery
Charging ...
Level: 65%
Technology: Li-ion
Temperature: 0.0 C (32.0F)
Voltage: 4027 mV

Memory
Cache Total downloads: 124 MB / Available: 106 MB
Total internal memory: 1.97 GB / Available: 263 MB
External Drive: mounted
External Drive Total: 12.46 GB / Available: 10.23 GB
Removable external storage: true
Emulation of an external drive: false
External SDCard Total: 3.68 GB / Free: 3.68 GB
Total RAM: 2,00 GB
Available RAM: 242 MB
Limit RAM: 64,00 MB

Low Memory Killer Levels
FOREGROUND_APP: __ 32.00 MB
VISIBLE_APP: _________ 40.00 MB
SECONDARY_SERVER: 48.00 MB
HIDDEN_APP: ________ 56.00 MB
CONTENT_PROVIDER: 64.00 MB
EMPTY_APP: __________ 80.00 MB

Telephony
Data on deyatelnsti: DATA_ACTIVITY_NONE
Information Status: DATA_DISCONNECTED
IMEI (or MEID): sr
IMEI / SoftVer: 00
MSISDN: null
Registered MCC:
Registered MCC MNC:
The registered name of the operator:
Network Type: NETWORK_TYPE_UNKNOWN
Phone type: PHONE_TYPE_NONE
SIM Country Code:
SIM MCC MNC:
SIM operator name:
SIM Serial Number: null
SIM status: SIM_STATE_UNKNOWN
ID (IMSI) of the Subscriber: null
Voicemail number: null
Roaming: false
ICC CARD
The cell is not detected

CPU
Processor ARMv7 Processor rev 0 (v7l)
processor 0
BogoMIPS 2015.34
processor 1
BogoMIPS 2015.34
processor 2
BogoMIPS 2015.34
3 processor
BogoMIPS 2015.34
Features swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer 0x41
CPU architecture 7
CPU variant 0x3
CPU part 0xc09
CPU revision 0
Hardware RK30board
Revision 0000
Serial 0000000000000000
4 CPU (s)
cpu1-frequency range: 312.0 ->1608.0MHz
cpu1-current frequency: 1008.0MHz
cpu1-frequency statistics (time):
- 312.0 MHz 60.31% (10230953)
- 504.0 MHz 2.25% (381922)
- 816.0 MHz 32.37% (5491513)
- 1008.0 MHz 0.51% (85990)
- 1200.0 MHz 1.14% (192938)
- 1416.0 MHz 1.6% (271512)
- 1608.0 MHz 1.82% (307981)
cpu2-frequency range: 312.0 ->1608.0MHz
cpu2-current frequency: 1008.0MHz
cpu2-frequency statistics (time):
- 312.0 MHz 60.31% (10230953)
- 504.0 MHz 2.25% (381922)
- 816.0 MHz 32.37% (5491513)
- 1008.0 MHz 0.51% (85991)
- 1200.0 MHz 1.14% (192938)
- 1416.0 MHz 1.6% (271512)
- 1608.0 MHz 1.82% (307981)
cpu3-frequency range: 312.0 ->1608.0MHz
cpu3-current frequency: 1008.0MHz
cpu3-frequency statistics (time):
- 312.0 MHz 60.31% (10230953)
- 504.0 MHz 2.25% (381922)
- 816.0 MHz 32.37% (5491513)
- 1008.0 MHz 0.51% (85992)
- 1200.0 MHz 1.14% (192938)
- 1416.0 MHz 1.6% (271512)
- 1608.0 MHz 1.82% (307981)
cpu4-frequency range: 312.0 ->1608.0MHz
cpu4-current frequency: 1200.0MHz
cpu4-frequency statistics (time):
- 312.0 MHz 60.31% (10230953)
- 504.0 MHz 2.25% (381922)
- 816.0 MHz 32.37% (5491513)
- 1008.0 MHz 0.51% (85993)
- 1200.0 MHz 1.14% (192938)
- 1416.0 MHz 1.6% (271512)
- 1608.0 MHz 1.82% (307981)


other
Camera

Screen
Resolution: 1200 x 1920
Frequency of updates: 60.989002
X factor for DIP: 1.5
Density: 240 dpi
Pixels per inch X: 225.77777 dpi Y: 240.23645 dpi

Opengl

Sensors
Gravity sensor: 0.2 mA by Freescale Semiconductor
Compass Magnetic field sensor: 6.8 mA by Asahi Kasei
Compass Orientation sensor: 7.0 mA by Asahi Kasei
Gyroscope sensor: 6.1 mA by STMicroelectronics
Proximity sensor: 0.5 mA by Dyna Image Corporation
Light sensor: 0.5 mA by Dyna Image Corporation
Pressure sensor: 1.0 mA by ms5607
Temperature sensor: 1.0 mA by ms5607
Rotation Vector Sensor: 13.1 mA by Google Inc.
Gravity Sensor: 13.1 mA by Google Inc.
Linear Acceleration Sensor: 13.1 mA by Google Inc.
Orientation Sensor: 13.1 mA by Google Inc.
Corrected Gyroscope Sensor: 13.1 mA by Google Inc.

Location
Root directory: / system
Data Directory: / data
cache directory: / cache
State of the external storage device: mounted
External storage directory: / mnt / sdcard
File directory external drive: /mnt/sdcard/Android/data/com.electricsheep.asipro/files
Cache directory on the external drive: /mnt/sdcard/Android/data/com.electricsheep.asipro/cache

Media catalog
Reminders: / mnt / sdcard / Alarms
DCIM: / mnt / sdcard / DCIM
Downloads: / mnt / sdcard / Download
Movies: / mnt / sdcard / Movies
Music: / mnt / sdcard / Music
Notifications: / mnt / sdcard / Notifications
Pictures: / mnt / sdcard / Pictures
Podcasts: / mnt / sdcard / Podcasts
Ringtones: / mnt / sdcard / Ringtones

Features
android.hardware.wifi
android.hardware.location.network
com.google.android.feature.GOOGLE_BUILD
android.hardware.location
android.hardware.screen.landscape
android.hardware.screen.portrait
android.hardware.usb.accessory
android.hardware.wifi.direct
android.hardware.camera.any
android.hardware.bluetooth
android.hardware.touchscreen.multitouch.distinct
android.hardware.sensor.light
android.hardware.microphone
android.hardware.camera.autofocus
android.software.live_wallpaper
android.hardware.telephony
android.hardware.touchscreen.multitouch.jazzhand
android.hardware.usb.host
android.hardware.touchscreen.multitouch
android.hardware.faketouch
android.hardware.camera
android.hardware.location.gps
android.hardware.telephony.gsm
android.hardware.camera.front
android.hardware.sensor.accelerometer
android.hardware.touchscreen
glEsVers = 2.0

Java properties
java.vendor.url:http://www.android.com/
java.class.path:.
java.class.version: 50.0
os.version: 3.0.36+
java.vendor: The Android Project
user.dir: /
user.timezone: null
path.separator:
os.name: Linux
os.arch: armv7l
line.separator:
file.separator: /
user.name:
java.version: 0
java.home: / system

restore points
recovery point
Name Type Settings

- /
rootfs rootfs ro, relatime

- / dev
tmpfs tmpfs rw, nosuid, relatime, mode = 755

- / dev / pts
devpts devpts rw, relatime, mode = 600

- / dev / cpuctl
none cgroup rw, relatime, cpu

- / proc
proc proc rw, relatime

- / sys
sysfs sysfs rw, relatime

- / sys / kernel / debug
/ sys / kernel / debug debugfs rw, relatime

- / acct
none cgroup rw, relatime, cpuacct

- / mnt / secure
tmpfs tmpfs rw, relatime, mode = 700

- / mnt / asec
tmpfs tmpfs rw, relatime, mode = 755, gid = 1000

- / mnt / obb
tmpfs tmpfs rw, relatime, mode = 755, gid = 1000

- / system
/ Dev / block / mtdblock8 ext4 ro, noatime, nodiratime, barrier = 1, data = ordered, noauto_da_alloc

- / data
/ Dev / block / mtdblock6 ext4 rw, nosuid, nodev, noatime, nodiratime, barrier = 1, data = ordered, noauto_da_alloc

- / cache
/ Dev / block / mtdblock5 ext4 rw, nosuid, nodev, noatime, nodiratime, barrier = 1, data = ordered, noauto_da_alloc

- / mnt / external_sd
/ Dev / block / vold / 179: 1 vfat rw, dirsync, nosuid, nodev, noexec, relatime, uid = 1000, gid = 1015, fmask = 0002, dmask = 0002, allow_utime = 0020, codepage = cp437, iocharset = iso8859 -1, shortname = mixed, utf8, errors = remount-ro

- / mnt / sdcard
/ Dev / block / vold / 31: 9 vfat rw, dirsync, nosuid, nodev, noexec, relatime, uid = 1000, gid = 1015, fmask = 0002, dmask = 0002, allow_utime = 0020, codepage = cp437, iocharset = iso8859 -1, shortname = mixed, utf8, errors = remount-ro

- /mnt/sdcard/.android_secure
tmpfs tmpfs ro, relatime, size = 0k, mode = 000

- /mnt/asec/ru.dublgis.dgismobile-1
/ Dev / block / dm-0 ext4 ro, dirsync, nosuid, nodev, noatime, barrier = 1

- /mnt/asec/com.samalyse.tapemachine-1
/ Dev / block / dm-1 ext4 ro, dirsync, nosuid, nodev, noatime, barrier = 1

- /mnt/asec/com.fgol.HungrySharkEvolution-1
/ Dev / block / dm-2 ext4 ro, dirsync, nosuid, nodev, noatime, barrier = 1

- /mnt/asec/udk.android.reader-1
/ Dev / block / dm-3 ext4 ro, dirsync, nosuid, nodev, noatime, barrier = 1

- /mnt/asec/org.geometerplus.zlibrary.ui.android-1
/ Dev / block / dm-4 ext4 ro, dirsync, nosuid, nodev, noatime, barrier = 1

- /mnt/asec/ru.exaybachay.pear-1
/ Dev / block / dm-5 ext4 ro, dirsync, nosuid, nodev, noatime, barrier = 1

- /mnt/asec/com.freeman42.rutracker.client-1
/ Dev / block / dm-6 ext4 ro, dirsync, nosuid, nodev, noatime, barrier = 1

- /mnt/asec/gloom.notepad-1
/ Dev / block / dm-7 ext4 ro, dirsync, nosuid, nodev, noatime, barrier = 1

- /mnt/asec/com.asrazpaid-1
/ Dev / block / dm-8 ext4 ro, dirsync, nosuid, nodev, noatime, barrier = 1

- /mnt/asec/com.aim.racing-1
/ Dev / block / dm-9 ext4 ro, dirsync, nosuid, nodev, noatime, barrier = 1


processor HardwareRk30board , Although the description onsavagemessiahzine.com Set processor RockChip RK3188 . Probably RockChip RK3188 - a subtype RK30board? On the Wikipedia In any case, do not talk about this relationship, and there is only RK30xx RK31xx. And online rockchip too, there is no such connection Rockchip .
Although the Internet is just about guides RK3188Instructions for replacing the internal memory to an external (external sdcard) on devices on RK3188 Android 4.4 KitKatand it contains the firmware called fstab.rk30board.bootmode.emmc.
Onsavagemessiahzine.comWe talked about the incompatibility with RK3188 firmware RK3066
savagemessiahzine.com
The essence of the question is this: is it possible to use, for example, this instructionCM10.1 on rk30boardfor our Q892?

Post has been editeddetaylor - 18.08.16, 09:57



Rep: (6)
Honestly I can not even tell



Rep: (0)
Through Hyde ever I made, just like in the movie. Startup screen was black, and something clicked in the plate at intervals of about 10 seconds (and simultaneously quenched screen) (and continues to infinity). was flashingrk30sdk-eng 4.2.2 JDQ39 eng.root.20140117.120552 test-keys (You can see the message in the spoiler above). Then I do here on this instruction https://yadi.sk/i/BMPyaSOUuJgR5 (There is a reference to the firmware). It turned out the same way that you have described, I ask new_firmware_ # 128_DS892_RoverPad Tesla 8.9_20140531.img . The plate is loaded. Now it is necessary firmware rk30sdk-eng 4.2.2 JDQ39 eng.root.20140531.142118 test-keys . Maybe now over to try to put Pipo M7T Android 4.4.2?

p.s. a reference to the guide that helped me findright here

Post has been editeddetaylor - 18.08.16, 13:11



Rep: (0)
Yes, firmware M7T 4.4.2 stands on the original Tesla's very easy. Main sew by Butch): rolleyes:



Rep: (0)
The point is that the original firmware was only apparently an older version.
compare:
20140117.120552
20140531.142118


PS. I have not tried to put M7T 4.4.2
it is good to point out what was the firmware to the firmware, if it affects the successful completion of the firmware

Post has been editeddetaylor - 18.08.16, 16:44



Rep: (0)
He scored on M7T 4.4.2. successfully deliveredROOT.



Rep: (0)
And that way with OTG? I insert the wire, and a flash card with display lights up connection even. I usually otg cable without any jumpers 100th. 5th contact simply grounded. How did the device behaves after the wire connections in the HOST terminal?



Rep: (866)
M
We move to subsectionRoverpad


Full version    

Help     rules

Time is now: 18/05/20, 20:27