[X]Assistant

[SerVBul]

пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ 3G пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅ пїЅпїЅпїЅпїЅпїЅ Android пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅ download

Greetings
Reading a life hacker, stumbled uponinteresting article. Because I did not find an existing topic on the forum about this modification, I decided to create it in order to promote a way to the masses!

Summary table with the results. Open for editing.

Links to posts in other topics with the results of testing this method

Samsung Galaxy S4 Mini Duos
Xiaomi Redmi Note 3 Pro
IUNI U3
Alcatel OT-6043D Idol X +
Asus Zenfone Go ZB500KG

Test results sent to QMS

Please do not post results in QMS. Write in this thread.

Xiaomi Redmi Note 3 Pro

Hello! Unfortunately, the subject did not work in my case - Xiaomi Redmi Note 3 Pro 3 / 32Gb (AOSP-RRO 6.0.1), operator Velcom 3g, Belarus, Gomel.

Before

After

I would be glad if my results will be with others under the spoiler) Well, it was interesting, thanks!

For the result, thanks to u.kurserjah.

Xiaomi Redmi Note 3 Pro

Acceleration of 3G CDMA Intertelecom (Ukraine)
Good afternoon, I requested your script, everything went well, without a script the speed is 0.35 - 0.64 mb / s (3G CDMA), after the script - 0.9 - 1.04 mb / s. Many thanks for your hard work !!!
Device Redmi Note 3 Pro Global Developer 16.12.8

For the result, thanks to u.pavl-wb.

Samsung Galaxy S4 Mini

Hi, on my sgs4mini 9192 android 7.1 phone, the first two methods only made it worse, and the third one made the wrong link.
Standard: Download 6.22, returns 3.59, ping 34.
Method 2: Download 3.47, return 1.16, ping 31.
Method 1: Download 2.82, return 2.57, ping 31.

For the result, thanks to u.asd_13.

ZUK Z2

Good evening. Model ZUK Z2, custom-based runoff 7Andrey.
Ping increased, was 62-66, became 71.
But the speed is more, if that is possible.

For the result, thanks to u.black3383.

Xiaomi Redmi Note 3 Pro

Internet speedup did not work, "Xiaomi Redmi Note 3 Pro; Citrus CAF Firmware - Android 7.1.2" I tried the one in the subject and 1st way, created the "peers" folder with the rights - 755 and threw the file with the rights 555 anyway and yes operator "Life Cell"

For the result, thanks to u.Ramses6259.

Xiaomi Redmi Note 3 Pro

Before manipulation 40-48. After 20-22 mb / s 4g
Redmi note 3 pro 2/16 miroom 10.2 В± radon 6.0

For the result, thanks to u.alb-99.

A bit of theory and observation

The article on lifehacker refers to the sourcexdaas well as usedJacobson’s TCP / IP header compression method.
The method is based on configuring a PPPD daemon - a Point-to-Point Protocol Daemon daemon. You can read more about this.here.
On my 4G smartphone, the data download speed increased only in the 3G connection mode, and in the 4G connection mode it remained equal (within the margin of error, of course). The change in speed in the second generation network did not check, because my operator in this range does not serve.
That is, the acceleration is relevant only to those who have the network at least sometimes works in 3G connection mode.

If interested, welcome to the instructions.

Disclaimer

I remind you that you perform all actions at your own peril and risk; no one is responsible for their consequences. It is recommended that you first read the instructions completely, evaluate your capabilities, and then proceed with the implementation.

Installation Instructions

After updating the system, you must reinstall! Read more inUseful ->Note on the location of the file in the system.

Using customrecovery(script version 16.8)

If there is Ruth access, then you should first try the Ruth method. there ismessage, that after flashing the archive, the device stopped loading! It is strongly recommended to make a backup!

1. Measure the speed of the 3G connection before executing the instructions (I like to use the site2ip.ru/speed), write / scroll / remember the result.
2. Save fileupdate-speed-up-3g-16.8.zip(176.22 KB)
on the device and flash it through the recovery.
3. [optional] Just in case, after installation, check for the presence of a fileoptionsin folder/ system / etc / ppp, if it was not copied there, the acceleration will not work (please informto mein QMS).
4. Check the speed increase in 3G connection mode: measure the speed at the same place where it was measured for the first time, and compare it with the previous result.

If there are no special changes, you can try another installation method or go to the removal instructions :(

Results sent to QMS:
This method works on: Xiaomi Redmi Note 3 Pro with TWRP 3.0.0-0 recovery.
This method does not work for: Lenovo P70-A with TWRP v3.0.2.0 recovery.

Instruction written by userSerVBul, inspired by the way uv.alexax66.

UsingROOTaccess

Under the spoilers are explaining screenshots (for example, Root Explorer).

1. Measure the speed of the 3G connection before executing the instructions (I like to use the site2ip.ru/speed), write / scroll / remember the result.
2. Saveoptions.zip(398 bytes)
on the device.
3. Unpack the archive and move the fileoptionsfolder/ system / etc / ppp.

To item 3

The file is copied to the desired folder:

4. Change permissions for this file: in the "Read" and "Execute" columns, set three checkboxes each, and in the "Record" column, on the contrary, there should be no checkboxes. Thus, file permissions take the form "r-x r-x r-x" or 0555.

To item 4

In different file managers, changing file properties is done differently, for example, in the Root Explorer you need to make a long tap on the file, click on three points and in the opened window select "Permissions":

The file system may be write protected. You need to enable recording:

We set permissions:

You must return the write protection. Push the button:

The inscription r / o says that the file system is in read only mode - write-protected:

5. Reboot the device.
6. Check the speed increase in 3G connection mode: measure the speed at the same place where you measured the first time, and compare it with the previous result.

If there are no special changes, you can try another installation method or go to the removal instructions :(

Instruction written by userSerVBulbased on lifehacker's instructionsdimgor.

In development: using adb shell; manually using ROOT.

Removal Instructions

Using ROOT access

1. Delete a file/ system / etc / ppp / options.
   
2. Reboot device.
   

Instruction written by userSerVBul based on lifehacker's instructions dimgor .

In development: using custom recovery; using adb shell.

Useful

How to measure the speed of the 3G connection

If your device does not work only in 3G mode, measuring 3G speed can be a problem, because device in the testing process can switch to another generation of communication. Therefore, you need to activate the "3G only" mode.
Instruction (on different devices the process may differ slightly):

1. In the call to dial* # * # INFO # * # *(i.e. in numbers*#*#4636#*#*), the test window should automatically open (you do not need to press the call button).
   
2. Select item "Phone information"(if there are several SIM cards in your device, then it may be offered a choice for which SIM to change the settings).
   
3. Scroll and find the drop-down menu under the heading "Set preferred network type".
   
4. Remember that it is selected by default (to return as it was after the test).
   
5. Select item "WCDMA only"(on different devices may be called"3G only", "HSDPA only"...).
   
6. Wait a few seconds for the connection to restart.
   
7. Check connection speed.
   
8. Reset the settings to their original state (repeat steps 1-6).
   

I can add that on my smartphone (Xiaomi Redmi Note 3 Pro) after rebooting, the network type returns to its default position.

Note on the location of the file in the system

Because fileoptions(which runs the acceleration) is in the folder/ systemAfter flashing / updating the system, its automatic removal is possible. Therefore, after each such action, you must install again.

Other ways to accelerate the connection

You can check other ways:
* Method 1
* Method 2
* Method 3 (ADB)
All of them are planned to be added to the header and design.

* Description of the current options file

* Test the load time of the real file

I received both gratitude and the message that the acceleration failed. Let's figure it out! Do not forget to vote in the poll. We add our results to the pivot table. For suggestions on filling caps write toQMSto userSerVBul . In this topic, you can also write: welcome information about the model of the device, the cellular operator, and, of course, about the result of the done manipulations.
We hide the screenshots under the spoiler: we respect other users who do not want to spend traffic on pictures! (Short lesson "How to clean images under spoiler")

Topic looking forcurator. It is necessary to keep the topic up to date, as well as bring to mind the methods of installation and removal.

Post has been editedSerVBul - 13.03.19, 12:00

[SerVBul]

Joggerdx @ 10/23/2016, 02:46

and what should give the prescribed commands in the file "options", if not a secret?

Of course it is not a secret. If you google it, there is information that these commands affect the Point-to-Point Protocol Daemon daemon (PPPD). Here is a description of the options:
http://manpages.ylsoftware.com/ru/pppd.8.html
Options that are applied in our file:
crtscts vj bsdcomp deflate

Hmm, since it’s so detailed about it, maybe there will be an unoccupied developer who will work on an application for auto-installation of this case? ..

Post has been editedSerVBul - 24.10.16, 20:55

Reason for editing: Corrected link

[viitek74]

Acceleration noted !!!! tablet air tab m101g operator tele 2 Vladimir region.

[Lasum]

Works. Smart Lenovo S930, operator Vodafone UA.
Results (figures rounded): ping 70 - 40, reception 4.2 - 7, transmission 2 - 3.5. But it is on a good hosting. For those that are worse - and the results are more modest, but in any case they are not inferior to the original.

[komkosant]

Hmm, interesting, but the EDGE will accelerate?

[SerVBul]

komkosant
I did not check, my operator only has 3G and 4G coverage. But according to information from the wiki, EDGE has a theoretical maximum speed of up to 474 kbps, i.e. less than 60 kb / s. In 3G, for example, theory is not achieved even with compression. speed. In short, very slowly, sho, sho it will not give you a normal speed for working with a modern Internet.

Of course, if someone from the community checks 2G, I will be only too happy.

Post has been editedSerVBul - 15.11.16, 12:35

[bredkhv]

Earned yota Dv I thank!)

Post has been editedRu4kin - 26.11.16, 01:25

Reason for editing: Spoiler

[Hunter77john]

I added a little speed, Samsung c4 mini Beeline ... and in the evening the Internet was almost there))) and I noticed that at least the speed does not depend on the size of the ping ... but maybe the tester is lying

[bredkhv]

Prosba people with mobile Internet, make screenshots in the morning and evening (more people in the evening).

[klolek]

Zmob, HomTom NT17, Android 6.0. Testing before and after installation and again after removal, several times. From this optimization, the ping is worse and the average speed is slightly worse, both "up" and "down"

[smokok]

Keneksi fire 2
Life (by)

Post has been editedsmokok - 30.11.16, 22:07

[nikitos920318]

Works! Asus zenfone2 ze551ml, Android 6. For 3 measurements done.

Before

After

Post has been editednikitos920318 - 04.12.16, 16:40

[Son1k83]

Ukraine, operator Intertelecom, CDMA, RedMi Note 3 Pro
before and after . I tested the 1st time (before the patch), installed the patch (through the recovery) and immediately tested the 2nd time (in the same place, in the same position of the phone)
Ping increased, but speed increased. Low speed due to a bad signal in my room. On the street in the coverage area, I think the result will be much clearer

Post has been editedRu4kin - 14.12.16, 13:30

Reason for editing: spoiler

[afraa]

Asus zenfone2 ze551ml, Android 5.0 stock firmware.
On average, a little better.

Before

After

[19RamZes94]

Good day to all ! I want to contact the author and everyone who has applied this "script". Doesn't it bother you that the data inside the published "script" differ from those provided on the primary forum? And the way in which they propose to upload a file (/system/etc/ppp/peers/pppd-ril.options) is different from the one they propose to use here. Below I suggest the file, but with the data that is published in the original source.
I ask people to test the attached file. Just do not forget to unsubscribe about the result.

Attached files

pppd-ril.options.zip(448 bytes)


Post has been edited19RamZes94 - 06.01.17, 13:56

Reason for editing: Added the path by which you want to place the configuration file

[SerVBul]

19RamZes94,
It depends on what you source.
Pagehttps: //forum.xda-deve...owthread.php? t = 1800351, as I understand it, talks about a method that is not described in the header, but which you mentioned.
There is also a link to the posthttps: //forum.xda-deve…42185612&postcount=100which tells just about the method shown in the header.

True, we must check this way. You can say you reminded to do it. Only myself now in roaming, I will not get to check soon.

[19RamZes94]

SerVBul, there may be volunteers who try this file. What I noticed through the neopard application (it creates a connection for compressing and optimizing data) in conjunction with this script (and yours), the Internet subjectively began to slow down. But without vpn, the Internet seems to be back on track.

[Virtual acid]

But nobody is embarrassed that they are measuring in real speed, because the numbers are shown, but in the end, some kind of left speed is simply substituted, which has never been born ??? In my case it’s as much as 60 !!! Megabit! A downloaded at normal speed. Fake what that.

[Virtual acid]

In, normally, already 112.4 megabits. Who has more? :-D

[n_droid]

+ 170% both ways

[SerVBul]

Virtual acid,
download time depends not only on your speed, but also on the speed of the server (site) from which the download occurs. There are other factors.

The speed drops:
1. If the server is loaded; is far away or just limits the rate of return.
2. If the communication operator is overloaded (more precisely, the operator’s tower), for example, you are trying to download something in a crowded place or in a normal place, but at peak times.
3. If there are any obstacles between you and the tower.
Also, the speed depends on the modem (what is used: built-in device or external).

This is what I could think of right away.
Try to swing something torrent with a large number of distributors - so you can also see the maximum speed.

It seems that some tester gives random values? Take advantage of others. Google "measure connection speed".

Post has been editedSerVBul - 10.01.17, 22:29