Preparing to restore.
Download:
1_Drivers_MTK6735.zip (6.2 MB)2_FlashTool_MTK6735.zip (32.7 MB)3_ZTE_C880S.ZIP (840.6 MB)4_C880U_C880S_V1.0.0B06_5.1.ZIP (795.3 MB)5_recovery + root.zip (18 MB)6_Camera_ZTE.zip (9.9 MB)7_ZTE_Wallpapers.zip (12.8 MB)8_TWRP.ZIP (1002 MB)Recovery process:
1. Extract the downloaded archives to the root disk folder (for example, C: \ ZTE_Blade_A1 \);
2. Install the driver from the folder for windows_32 or windows_64, respectively (: \ ZTE_Blade_A1 \ 1_Drivers_MTK6735);
3. Run as administrator flash_tool.exe (: \ ZTE_Blade_A1 \ 2_FlashTool_MTK6735 \ flash_tool.exe);
- in the setting of the flasher in the Connection section, select USB !!!
- load the scatter from the directory with the firmware (: \ ZTE_Blade_A1 \ 3_ZTE_C880S \);
- note all the jackdaws that we will flash;
- turn off the phone (the phone must be disconnected from the PC);
- click Download;
- connect the phone to USB (no buttons need to be pressed) - wait for the completion of the firmware;
- close the flasher and disconnect the phone from USB.
4. Update the firmware to version Р’06
- Run as administrator flash_tool.exe (: \ ZTE_Blade_A1 \ 2_FlashTool_MTK6735 \ flash_tool.exe);
- in the setting of the flasher in the Connection section, select USB !!!
- load the scatter from the directory with the firmware (: \ ZTE_Blade_A1 \ 4_C880U_C880S_V1.0.0B06_5.1 \);
- note all the jackdaws that we will flash;
- turn off the phone (the phone must be disconnected from the PC);
- click Download;
- connect the phone to USB (no buttons need to be pressed) - wait for the completion of the firmware;
- close the flasher and disconnect the phone from USB.
5. Turn on the phone (I did not turn on the screen after the first power on)
Solution: - hold down the power button for 10-15 seconds until the phone turns off
- turn on the phone again (I turned on).
6. Install TVRP
- Run as administrator flash_tool.exe (: \ ZTE_Blade_A1 \ 2_FlashTool_MTK6735 \ flash_tool.exe);
- in the setting of the flasher in the Connection section, select USB !!!
- load the scatter from the directory (: \ ZTE_Blade_A1 \ 5_recovery + root \);
- mark only one tick recovery;
- turn off the phone (the phone must be disconnected from the PC);
- click Download;
- connect the phone to USB (no buttons need to be pressed) - wait for the completion of the firmware;
- close the flasher and disconnect the phone from USB;
- turn on the phone by simultaneously pressing two buttons (volume + and on) go into the TVRP.
7. Set the root right
- copy to the phone PRO-SuperSU-v2.67.zip (: \ ZTE_Blade_A1 \ 5_recovery + root \);
- turn off the phone;
- go to the TVRP, click "Installation" and select PRO-SuperSU-v2.67.zip;
- overload the phone.
8. After the restoration of the firmware, we restore IMEI (for whom it flew off)
- several ways to restore IMEI (
http://androidp1.ru/ka...-kitayskom-smartfone/)- who failed to download 8_TWRP.ZIP unpack and copy to your phone;
- we spin in rekoveri press "Recovery" select archive "2016-05-13--10-20-55_C880SV1.0.0B06" mark only nvram and restore;
- we overload the phone and register our IMEI (
http://androidp1.ru/ka...-kitayskom-smartfone/)9. Everything. Good luck to all. Everything worked. I wish you the same.
Bonus
Russian camera
- unzip 6_Camera_ZTE.zip (should be "Camera_ZTE") copy it to your phone;
- copy "Camera_ZTE" to system / Priv-app in any known way (we agree to replace files)
- Set permissions the same as other folders and applications (rwxr-xr-x for folders, rw-r-r for applications). We also set permissions for the lib folder in CameraZTE, and all that is in it.
Many thanks: jemmini, ka7a8, Gektor_san, burlakaaleks, zagsergej and all forum participants.
Maybe someone forgot, please do not be offended
Which of the knowledgeable people will find errors, please correct.
Good luck to all.