[X]Assistant

[kirilllulin]

Highscreen Spade - Firmware
Highscreen spade
Description | Discussion пїЅ | Firmware пїЅ

Important information!

Everything you do with your phone you do at your own risk!
Before any manipulations with the phone, I recommend to make a full backup, otherwise, you risk to stay with a brick
For filling the caps contact kirilllulin

Drivers and Utilities

пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ, SP Flash Tool, пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ, root download

Backup, save and restore firmware
Working driver for Windows 10

Firmware

Official firmware (L005, L006)
MIUI7, Editing firmware
Firmware from kirilllulin
CyanogenMod 12
Newest cm13
Newest RR
MIUI8
Miui8 v1.2
TWRP

Instructions

Route through 360ROOT
FAQ

Hard reset (how to reset settings via recovery)

Stock recovery

1. Turn off the phone
   
2. Hold and hold the power button and the VOLUME button
   
3. Wait until the green robot appears.
   
4. Press the power button
   
5. With the help of the VOLUME-button, go to the line
   
6. Press the VOLUME-button
   
7. go to the line "Yes - delete all user data"
   
8. Press the VOLUME + button
   
9. Matsni again on the same button after the process is over
   
10. Phone will reboot
    
11. Everything!

TWRP

1. Turn off the phone
   
2. Turn on with clamped VOLUME-
   
3. Poke on the menu "wipe"
   
4. We spend the bottom of the screen
   
5. Click on reboot, and then on system

Instructions how to put TWRP

1 way

1. Download the archive from the recovery for l005
   
2. Unpack it
   
3. File "recovery.img" transfer to the root of the SD card
   
4. We get root through the program 360ROOT (the instruction is in the header)
   
5. Download and install the program "mobile uncle"
   
6. We launch, provide root and click the button "update recovery" (the name of the button may change due to the version of the program)
   
7. The recovery.img button appears
   
8. Klatsaem on her
   
9. We agree with the installation (the phone hangs)
   
10. We agree with the reboot in the recovery

2 way

1. We put on the PC program SP Flash Tool
   
2. Download archive from recovery to PC
   
3. We unpack archive (there are two files)
   
4. Turn off the phone, take out and reinstall the battery
   
5. Select the file in the flash tool (it was in the archive)
   
6. Click the "download" button
   
7. We switch the phone to PC by cable
   
8. We wait...
   
9. A green circle appears - turn off the phone

Codes in the dialer (some do not work on all firmware)

*#*#3646633#*#* Engineering menu
*#06# IMEI
*#8375# Serial number
*#87# Tests

miscellanea

GApps download from site: http://opengapps.org, The architecture of our processor:ARM
CApps for RR:link
Fix wi-fi on RR:link

Survey Screenshots

For questions of filling and updating the topic header, the Curator is always ready to help you.kirilllulin

Post has been editedkirilllulin - 19.07.17, 16:22

[PrYaNyAsAnYa]

Kolbas,Apparently deleted, on off. there is a sitehttp: //support.highscr...dgebase/List/Index/110

[karambasyki]

Hello. I downloaded cm13 on a highscreen spade, everything was installed, but the star dont for which I didn’t install the phone is not installed, it says that the device is not supported

Post has been editedkarambasyki - 02.11.18, 15:06

[_MeHaNiK_]

karambasykiMaybe her powerful iron is required, but the firmware does not care.

[karambasyki]

It does not depend on iron, in Google Play it says "your device is not supported"

[_MeHaNiK_]

karambasyki, I had it on tablets. You take another device and everything is OK!

[karambasyki]

everything is clear with tablets, many applications and games do not run on them.
The fact is that the description for the game says Android 5.0+.
I had Android 4.4.2 and there was the exact same problem with this game.

Post has been editedkarambasyki - 02.11.18, 15:56

[_MeHaNiK_]

karambasykiWell, then the cyan curve. The system somehow determines the incompatibility ...

[karambasyki]

Now I'll try another download, thanks for answering

[karambasyki]

is still not supported :(

Post has been editedkarambasyki - 02.11.18, 17:12

[_MeHaNiK_]

karambasykiBuy a new smart! : laugh_wild:: kindness:

[DiTaurus]

Hello everyone, I have such a question, or rather a problem. It was stitched many times and with stock firmware through flash and through recovery, there were never any problems. Lately sat on the L006, there was no problem. Yesterday, the phone wrote a launcher error and did not turn off. He took out the battery, tried to turn it on, hung on the highscreen inscription. I made a full reset via wipe data. After that, the phone did not turn on, stopped responding to the buttons. When you turn on the charge, nothing lights up on the screen. Decided to flash on l006 again. It all went well, but no changes. I decided to flash through the format, then restore imei and so on, the result is 0. The phone is flashed, but it does not turn on. The battery is 100% charged. PC sees the phone. I tried without a battery through the test point, I also sense 0. If you connect the phone to the PC, then the endless sounds of connecting and disconnecting the device. Likely I already tried all methods? Advise something please)

[_MeHaNiK_]

DiTaurus, Make a memory test in the USB flash drive. Rather, the emmc block died.

[DiTaurus]

Thanks, that's it?

Attached images

[_MeHaNiK_]

DiTaurusYes, you have some soc memory block dead. Repair is not subject.

[DiTaurus]

Thank you very much, I served 5 years, okay!))

[4.0]

There was a problem. After twrp 2.8 firmware from the cap on L006 and after flashing through Cyan 6.0 Tvrp, an eternal loading occurred. Vipy makes mistakes. The phone is not mine, highscreen spade is black. Suspiciously it had 6 GB of memory, before that it was sewn with a flash drive (before the firmware they had 4 GB of memory like), I did not sew it. The phone is not mine: unsure:.

[_MeHaNiK_]

4.0, You can flash the format all + download, but you have to raise the nvram.

[4.0]

_MeHaNiK_, And firmware update on off. instructions?

[_MeHaNiK_]

4.0, Memory test first.

[tyri085]

Hello. I had some problem with the phone. After, apparently unsuccessful, installing twrp recovery via the Rashr application, when you turned on the phone, there was nothing on the screen, just a gray screen that changed to a black screen after a short time, and so on ... Then, using the sp flash tool , formatted the phone (I don’t know, I thought it would help), but after that the phone stopped reacting at all to attempts to turn it on.
Please help.
upd.
now, after shamanism, when you turn on the phone, on the screen only the initial picture (which is displayed before switching on).

Post has been editedtyri085 - 20.02.19, 18:53