> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


375 pagesV  1 2 3 4 5 6 > »  
 
REPLY
> Highscreen Boost 3 / Boost 3 Pro - Firmware
Firmware survey
Which version of android is better and more stable? Boost 3
Android 5.1 [ 55 ] ** [30,56%]
Android 6.0 [ 73 ] ** [40,56%]
Costa Android 7.1.2 [ 28 ] ** [15,56%]
All not stable [ 24 ] ** [13,33%]
Total votes: 180
 
123123
Message#1
20.06.16, 13:00
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3361
Check in: 06.01.06

Reputation:-  537  +

Highscreen Boost 3 / Boost 3 Pro - Firmware
Picture
Description | Discussion | Accessories | power usage | Music Highscreen Boost 3 / Boost 3 Pro | Firmware

Drivers and Utilities

Official firmware
Factory firmware, as well as updates with instructions from the manufacturer’s website forBoost 3
Factory firmware, as well as updates with instructions from the manufacturer’s website forBoost 3PRO
Android 6.0 from 2016.07.22 for the Flash Tool
Backup for TWRP recovery L011 Highscreen Boost 3


Unofficial firmware

Instructions

Recovery

miscellanea

Survey Screenshots
Attached Image

Attached Image



User activity


There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.


Post has been editedderak1129 - 18.02.19, 00:40
Reason for editing: MIUI 10 PRO 9.1.17 android 6.0
actron
Message#2
07.11.15, 16:38
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 126
Check in: 06.04.08
Samsung Galaxy S8 Plus Exynos

Reputation:-  55  +

Installing TWRP recovery and getting root on Highscreen Boost 3


Attached fileTWRP_Recovery_Boost3.zip(11.06 MB)


We putVCOM drivers(spoiler Manual driver installation for firmware (VCOM)).
Here is the instruction(Firmware-instructions-spoiler ♦ How to use SP_Flash_Tool (How to flash a phone) ♦ ♦ Instructions "How to flash Recovery (CWM, TWRP) using SP FlashTools" ♦)here SuperSUwho sew through moderation.

Attached Image


It is also worth noting that the script in the stock firmware will try to wipe the moderation on each boot, so immediately after the firmware, the moderation MUST BE BEFORE THE SYSTEM DOWNLOADING TO IT. If you see a dead robot instead of TWRP, then you are in stock photography, then re-sew.
Entering the recovery - turn on the phone with the Vol + button held down, then select the recovery button with the Vol + button and confirm Vol-.

Post has been editedactron - 20.11.15, 07:30
actron
Message#3
28.11.15, 15:36
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 126
Check in: 06.04.08
Samsung Galaxy S8 Plus Exynos

Reputation:-  55  +

For those who do not arrive update(and it doesn’t fly to betu005 and what’s from the nidrome)

Link to stock 003

Post has been editedactron - 29.11.15, 23:35
Reason for editing: Factory 003 appeared
NDSS
Message#4
04.12.15, 15:24
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 242
Check in: 08.10.12
Asus ZenFone Max Pro M1 ZB602KL 4/64

Reputation:-  26  +

Perhaps someone else will come in handy, everything is taken here on the forum:
As I did louder ...
Do everything at your own peril and risk.
* # * # 3646633 # * # * - enter the engineering menu, thenHardware testingthereAudio, Normal mode, atTypeinsteadSipchooseSph, FurtherLevel- change the values ​​and clickset:
Level 0 - 90 Set - 72
Level 1 - 100 Set - 84
Level 2 - 110 Set - 96
Level 3 - 120 Set - 120
Level 4 - 130 Set - 128
Level 5 - 140 Set - 140
Level 6 - 160 Set - 148
Values ​​from 72 to 148 are original (factory).
After that, the back button until you exit the engineer. I also later rebooted the smart.
And addition fromsuperg1:"when choosingSphimpossible to changeMax Vol.I went intoMediaraised thereMax Vol.from 128 to 160, this value is for the whole branch. Now yelling. "


Post has been editedNDSS - 04.12.15, 15:25


--------------------
Owners Club

Asus Zenfone Max Pro m1 download

Highscreen Boost 3, 6.0; Highscreen Thor, 4.4.2;Asus zenfone max pro m1;
Apple iPad Air 32GB Wi-Fi + Cellular, 12.1.4
Sevenmaxmax
Message#5
12.12.15, 14:12
Our Dumas are clear!
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2044
Check in: 27.10.10
Motorola Moto Z2 Force

Reputation:-  1127  +

TWRP 2.8.7.7 for Highscreen Boost 3 by SevenMaxs


12/12/2015 - compiled from source64-bitRecovery TWRP 2.8.7.7 for Highscreen BF168.
An important point! In view of the fact that the stock zImage is "slightly" a curve, slowing down is possible - we will be treated by replacing the kernel from a more recent firmware.

In this Recovery, I managed to implement:
  • full SELinux support
  • full OTG support (mice are also supported)
  • mount internal and external SDcard to PC in MTP mode
  • SDcard and USB flash drives with fat32, exfat and ntfs file systems will work (in TWRP only, not Android OS)
  • ability to select FS (ext2, ext3, ext4, f2fs, exfat, fat32) for a formattable partition ..
  • taking screenshots by clamping power + volume down (saved / sdcard / Pictures / Screenshots)
  • full adb functionality
  • battery charge operation
  • added ability to install img-files

Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

Installation:
  • either through any modified recovery as usual zip patch ;
  • either using the utilityMobileuncle tools (available in the market);
  • either throughFlashtool (having previously obtained from the archive with this TWRP image recovery.img and MT6753_Android_scatter.txt ).

Download: Attached fileHighscreen_Boost3_TWRP_2.8.7.7_arm64_by_SevenMaxs.zip (14.65 MB)

MD5: 15A7EDA245A5009CA0CBF8783F1B8988

Post has been editedcherva70 - 20.12.15, 10:20
Reason for editing: In the header


--------------------
Do as I do, do better than me!
All ingenious is simple, but something that is difficult, it does not work!
andrejchern
Message#6
22.12.15, 10:29
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3149
Check in: 13.03.08
Alcatel Idol 3 OT-6045Y

Reputation:-  651  +

Here is a programMauiMETAhere's the video and the recovery manual itselfLink, do not root any manipulations are not needed, except for FT firmware or modem database

I took my own from it.
Attached fileDB.zip(7.84 MB)


Post has been editedGonza555 - 22.12.15, 10:57
Reason for editing: In the header


--------------------
HONOR 10i 128gb (Phantom Blue)
andreya108
Message#7
30.12.15, 22:54
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1017
Check in: 21.03.10
Xiaomi Redmi Note 3 Pro Prime

Reputation:-  1392  +

All recovery transferred here:
Highscreen Boost 3 - Discussion (Post by andreya108 # 46053763)

Post has been editedandreya108 - 15.01.16, 22:08


--------------------
All my work:4
andreya108
Message#8
10.01.16, 23:34
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1017
Check in: 21.03.10
Xiaomi Redmi Note 3 Pro Prime

Reputation:-  1392  +

TWRP 3.0.2-7 for Boost 3 and pro

Change history
[05.08.2016] 3.0.2-7
* updates from github: now you can save backups directly to a computer via adb

[16.05.2016] 3.0.2-3
* updates from github

[07.04.2016] 3.0.2-1
* tzdata updated
* updated default time zone (MSK)
* summer time (DST) by default ->turned off

[07.04.2016] 3.0.2-0
* error correction

[09.02.2016] 3.0.0-2
* fixed bug - the settings of the MTP and inverted navbar buttons were not saved

[09.02.2016] 3.0.0-1
https://twrp.me/site/u…-3.0.0-0-released.html
https://www.youtube.com/watch?v=MAcTA8xjw9o

[01.26.2016] 2.8.7.3r6
* updated twrp sources with github (many bug fixes and improvements, including a vector splash instead of jpg)

[01/18/2016] 2.8.7.3r5
* updated twrp sources with github

[01/15/2016] 2.8.7.3r4
* updated twrp sources with github (a full terminal has been added!)
* updated Russian translation

[11.01.2016] 2.8.7.3r2
* updated twrp sources with github (many changes)
* fixed problems with translation of lists (settings, sections, timezone, etc.)
* updated Russian translation
* fixed exfat mount error
+ sewn high-grade SuperSU (not stub)

...
Screenshots
Attached Image
Attached Image

Download:
BasketBuild Yandex.Disk

Post has been editedandreya108 - 05.08.16, 22:49


--------------------
All my work:4
skatt127
Message#9
05.03.16, 11:48
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 76
Check in: 19.09.08
MiTAC Mio A502

Reputation:-  8  +

The method of obtaining root without custom recovery and dancing with a tambourine at the device:

http: //forum.xda-devel...owthread.php? t = 2473747

This is kingoroot, but it is this version that works and the permanent root is obtained immediately. To update the system, you can simply turn it off.

In any case, Titanium and other programs are completely satisfied with it. Access to the file system is open with any rights.

Boost 3 is installed without problems, and the method from the header on my device does not work at all. I have already written about this above.

It would be necessary, probably to raise the cap.

Post has been editedskatt127 - 05.03.16, 12:35
boogeymaster
Message#10
22.03.16, 23:06
Old resident
*******
[online]

Group: Friendssavagemessiahzine.com
Messages 729
Check in: 11.04.08
Samsung Galaxy S9 Exynos

Reputation:-  55  +

So catch the guide on activating the onscreen navbar and disabling the physical
- should be the root
- go to the system folder, open the file build.prop,
add qemu.hw.mainkeys = 0 at the end
save the changes, reboot and we have the onscreen buttons
now disable the physical buttons so as not to interfere
- go to the system \ usr \ keylayout folder, we need the Generik.kl file (I advise you to back it up)
put the # character before the lines:
key 158 BACK
key 172 HOME
key 580 APP_SWITCH
This is the symbol for disabling the button, to enable it, you only need to remove the grid before the line
T e should get:
#key 158 BACK
#key 172 HOME
#key 580 APP_SWITCH
do at your own risk !!!
Thanks Snowy88 for help

Post has been editedboogeymaster - 01.07.17, 17:53


--------------------
- Need a brush
- ???
- you need a brush to understand the essence .....
Snowy88
Message#11
27.03.16, 09:09
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3110
Check in: 15.02.11

Reputation:-  1167  +

Instructions for installing TWRP Recovery and getting Root


1) download the drivers for our device, the Flash Tool, and the actual recovery
a) driver ->http://highscreen.ru/u…/zera_f/HM_Drivers.rar
b) Flash Tool ->http://highscreen.ru/u…203/Software/Flash.rar
c) recovery ->Highscreen Boost 3 / Boost 3 Pro - Firmwares (Fast toliknosov # 59380489)
d) Download the firmware ->Highscreen Boost 3 / Boost 3 Pro - Firmware (Fast hanuma50 # 51469411)(we will need a scatter file)
d) unpack it all somewhere in a convenient place on the PC
E) we throw the image of the recovery and the scatter file from the stock firmware somewhere in a separate folder.

2) (It is recommended to temporarily disable the antivirus, also if you have Win 8 \ 8.1 \ 10, then first disable driver signature verification)open the folder with the drivers, open the folder Driver_Auto_Installer_v1.1236.00,
Run the Install file, wait for the installation to finish and close the installer by pressing any button, restart the PC.

3) launch the Flash Tool, click on the Scatter-loading button, from the folder where you threw the scatter and recovery, select the file MT6753_Android_scatter
a) in the Flash Tool, press the Download button (green arrow down), and connect the turned off smart USB cable to the PC, waiting for the end of the process of firmware recovery.

4) turn off the smart from the PC, and immediately go into the recovery (otherwise it will be erased by the system), to enter the recovery: hold down loudly. up + power, then the volume button. Up, select recovery, with the loud button. down confirm

5) Congratulations, you have TWRP recovery :)
a) when you exit the recovery, it will offer to install SuperSU, agree if you need a Root, or refuse if not needed.
b) if you agree to install SuperSu, after loading the device you need to go into it, SuperSU will require updating the binaries, agree, select the "normal" option and after updating agree to restart the device.

Post has been editedSnowy88 - 07.02.18, 22:10
Reason for editing: In the header


--------------------
Mobile: LG G7 Fit + Gear S3 Frontier
PC: Clevo P870KM (-G) i5 8400 + GTX1066
Doppelgänger
Message#12
29.04.16, 23:15
Local
*****
[online]

Group: Friendssavagemessiahzine.com
Messages 185
Check in: 17.11.14
Highscreen Boost 3 Pro

Reputation:-  148  +

* snr93,
Greetings.
The installation algorithm is something like this:
1. Install the latest version of Recovery from the post today.TWRP 3.0.2-0 for Boost 3 and ProorTWRP 3.1 Boost3 and Boost3 PRO, and immediately go into it, otherwise it will be overwritten by the system (to enter the recovery: hold down the volume up + power buttons, then use the volume up button to select "recovery", confirm the choice with the volume down button) and just in caseInstructions for installing TWRP Recovery and getting Rootand link to stableSuperSU v2.82.
2. Go to the topicXposed
3. Download and install the Xposed shell to work with modulesXposed Installer v3.1.1.
Attached Image

4. Download a zip-archive with a framework for 5 or 6 androidARM64 (64-bit), throw it into the root of the flash drive, download, in addition, just in case, the archive-uninstallerXposed uninstaller.
5. Go to the recovery mode, click "Install", select the framework file that you previously downloaded and put on the flash drive, then swipe the zip archive with the framework, after the firmware you make the wipe cache and dalwick cache, reboot the device and wait for the download .
Attached Image
Attached Image
Attached Image

After installing and logging in, go to the shell of the program and see if Xposed is installed.
Attached Image

P.S .: If an error occursdata / data / de.robv.android.xposed.installer / cache / busybox-xposed: not foundhere is a recommendation to solve it. (Not relevant with the version of the shell Xposed Installer v3.1.1.)

Post has been editedDoppelgänger - 20.09.17, 20:45


--------------------
Highscreen Boost III Pro (Android 5.1 firmware L005 (Pro) + TWRP + Root + Xposed)
Shure SRH840 / Beyerdynamic DT770 PRO / Audio-Technica ATH-MSR7 / Creative Aurvana Live! / Ritmix RH-508
Ohne Musik wäre das Leben ein Irrtum.
Doppelgänger
Message#13
20.05.16, 20:53
Local
*****
[online]

Group: Friendssavagemessiahzine.com
Messages 185
Check in: 17.11.14
Highscreen Boost 3 Pro

Reputation:-  148  +

Instructions for the recovery of flew IMEI-codes
(In addition to the method from a respectedandrejchern)

1.Copy the IMEI codes in the way that is convenient for you, for example, write them down on paper or in a text file on a PC. IMEI codes are under the phone's batteries or on the phone's packaging box. Before further action, it is recommended to remove the SIM card (s) from the smartphone.
2.Go to the engineering menu of the smartphone, to do this, enter in the dialer: * # * # 3646633 # * # *;
3.Swipe right to the engineering section of the "Connectivity" menu and follow the path: CDS Information - Radio Information - Phone 1. In the line after AT + enter "E". Choose AT + EGMR = 1.7, "" and AT + EGMR = 1.10, "";
4.Choose AT + EGMR = 1.7, "" first. In quotes, write your first IMEI code (it should be AT + EGMR = 1.7, "your IMEI"). Under the line, click on "SEND AT COMMAND". For those who get the error "This command is not allowed in UserBuild" after sending the command: Put a space after the plus! That is, AT + EGMR = 1.7, "your IMEI";
5.Below the inscription "AT command is Sent";
6.Then, similarly, we enter the second IMEI code in quotes, but after AT + EGMR = 1.10, "";
7.Click “SEND AT COMMAND” again, “AT command is Sent” will appear again below;
8.Restart the phone and check the result. You can check the availability of IMEI codes by entering the combination in the dialer: * # 06 #;
P.S .:In my opinion the easiest and most reliable method.
P.P.S .:For rooted devices, there is an even simpler method, use the program,ToolHero.
Install the program, give root access, open the "IMEI" field, enter your 1st IMEI-kodo in the top line, enter your 2nd IMEI-code in the bottom line, reboot, check the result using the combination input in the dialer: * # 06 #.
Attached Image


Post has been editedDoppelgänger - 14.07.16, 12:24
Reason for editing: instructions in the header


--------------------
Highscreen Boost III Pro (Android 5.1 firmware L005 (Pro) + TWRP + Root + Xposed)
Shure SRH840 / Beyerdynamic DT770 PRO / Audio-Technica ATH-MSR7 / Creative Aurvana Live! / Ritmix RH-508
Ohne Musik wäre das Leben ein Irrtum.
Doppelgänger
Message#14
20.05.16, 23:43
Local
*****
[online]

Group: Friendssavagemessiahzine.com
Messages 185
Check in: 17.11.14
Highscreen Boost 3 Pro

Reputation:-  148  +

Instructions for manual installation of Androyd drivers on a PC.

1.Disable driver signature verification in Windows 8/10. To do this, use the local group policy editor. To start the local group policy editor, press the Win + R keys on the keyboard, and then type gpedit.msc in the Run window, press Enter.
2.In the editor, go to the section User Configuration - Administrative Templates - System - Driver Installation and double-click on the option “Digital Signature of Device Drivers” on the right.
Attached Image

3.Start installing drivers. First right-click on the "Start" icon and select Device Manager.
Attached Image

4.In the Device Manager window, click on the first item - the name of the computer. Click the "Action" section and select "Install old device".
Attached Image

5.Click "Next" and select "Install hardware selected from the list manually" and click "Next." Select "Show all devices" and click "Next."
Attached Image
Attached Image
Attached Image

6.Click "Install from disk" and in the window that opens, click "Browse" to select the driver. You can download drivers from the official website of Highscreen.HM_Drivers.raror use universal firewoodAttached fileWindows 7 8 10 MTK VCOM USB Preloader Drivers.zip(15.61 KB)

Attached Image
Attached Image
Attached Image

7.Select the driver under the path "HM_Drivers \ Driver_Auto_Installer_v1.1236.00 \ SmartPhoneDriver \x64orx86\ In \ usbvcom.inf "or" Windows 10 "x64" or "x86" MTK USB Drivers.inf "depending on the version of Windows - x64 for 64-bit and x86 for 32-bit. Click OK to load the driver.
Attached Image

8.From the list of drivers, select MTK USB port and click "Next." If a red warning window opens, click "Install this driver software anyway."
Attached Image
Attached Image
Attached Image

9.This action will add the following drivers to the operating system:
- MediaTek DA USB VCOM Port
- MediaTek PreLoader USB VCOM Port - for firmware device MT
- MTK USB DEBUG Port
- MTK USB Modem Port
- MTK USB port - to transfer the Preloader to the device (and restore in case of bad or damaged firmware).
Attached Image
Attached Image

10.Now you need to remove the device you installed, but leave the drivers in the operating system. In the Confirm Device Removal window, make sure that the “Remove driver software for this device” box is empty. You must leave the drivers in the operating system and remove only the device that is added.
Click OK to complete.
Attached Image
Attached Image

11.Now, when you connect an MTK-disabled device to a computer via USB, the device will be recognized either by MediaTek Preloader USB VCOM Port, or MTK USB port, if the device is brick or has bad / damaged firmware, the SP Flash Tool will be able to download the firmware to your device or install custom recovery through these interfaces.
Attached Image

Note:A suitable version for our phone can be taken from the official website of Highscreen.SP Flash Tool.Using other versions of the program, which may cause the phone to "turn on", it is recommended to use only the above version of the SP Flash Tool.

P.S .:Connect the device only after pressing the Download button in the SP Flash Tool, since the communication interface will be active for only 2 seconds if no data has been sent.
Source in English with XDA-Developers.

Post has been editedDoppelgänger - 14.07.16, 12:13
Reason for editing: Added drivers for Windows 7, 8, 10 MTK VCOM USB Drivers for 32 & 64 bit


--------------------
Highscreen Boost III Pro (Android 5.1 firmware L005 (Pro) + TWRP + Root + Xposed)
Shure SRH840 / Beyerdynamic DT770 PRO / Audio-Technica ATH-MSR7 / Creative Aurvana Live! / Ritmix RH-508
Ohne Musik wäre das Leben ein Irrtum.
123123
Message#15
20.06.16, 13:00
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3361
Check in: 06.01.06

Reputation:-  537  +

Highscreen Boost 3 -Android 6.0

Attached Image


Please love and favor - new firmware.It was going under Boost 3 !!!

Of the interesting features:

1) Android 6.0, kernel 3.18.xx
2) Observations - increased autonomy
3) Download function in Turbo mode - simultaneous operation of both Mobile Internet and WiFi
4) Redesigned Android 6.0 interface
5) Added more animation
6) Added a hard confirmation / permission menu for any application. Now you yourself can allow the application to allow it to work or not (for any opening of the application, even embedded). Directly affects charge
7) Added the option of horizontal work with a smartphone (like a tablet), for ease of use with two hands.
8) Bluetooth is fixed
9) well, and many buns of Android 6.0

It seems everything works, but I need help in testing everything and everything, to further improve the firmware.

UPD: do not forget to backup all data stored in the internal memory of your smartphone!
Firmware v1 from 06/17/2016
Instructions
1. Do not format the memory of the smartphone in SPFlashTool (Why? )
2. Flash through SpFlashTool version not lower than 5.1620

Attached Image


3. flashing in FirmwareUpgrade mode (be sure to check that all the jackdaws and all files are in place!)

The first launch can take 6-10 minutes. Do not panic!

Nuances - it is better to press ReedOnli in TVRP (TVRP itself will be fully functional - it can make and restore backups, flash patches, etc.) - the problem will be fixed.


Ruth - also the most fresh one
Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

Bugs
1. Going to a deep sleep on some smartphones, only a reboot helps.
Decision:
A) Disable power saving in standby mode and reboot / or do not use the memory card as the main memory of the smartphone.
B) flash the firmware again. immediately afterwards flash TVRP. When you first turn on, go to the TVRP and do Wipe - Data, Cache, Dalvik / art and ideally still have internal storage and reboot.
AT)Highscreen Boost 3 / Boost 3 Pro - Discussion (Post serega.lbt # 50700054)
D)Highscreen Boost 3 / Boost 3 Pro - Discussion (Post ChelpuS # 50774373)
D) Highscreen Boost 3 / Boost 3 Pro - Official firmware (Post user-x # 50927087)

Write on the forum and QMS about all bugs found.


Post has been edited123123 - 04.07.16, 13:32


--------------------
Power Four / AURORA
jemmini
Message#16
20.06.16, 22:39
TWRP
*********
[offline]

Group: Curators
Messages 3707
Check in: 21.02.15
Xiaomi Redmi 4X 3/32

Reputation:-  4081  +

TWRP 3.0.2forHighscreen Boost 3onAndroid 6.0

- based on Android 6.0 firmware kernelBF168_HIGHSCREEN-BOOST3_C024 / Fri Jun 17 14:06:38 CST 2016:Attached filerecovery.img(11.94 MB)

- based on Android 6.0 firmware kernelBF169_HIGHSCREEN-BOOST3_C017 / Fri Sep 9 17:28:27 CST 2016:Attached filerecovery.img(11.97 MB)

Installation(be sure to read !!)
You will need a usb cable and a computer with MTK preloader drivers and software installedSP FlashTool(check was performed on version 5.1628)
ATTENTION!!To eliminate all risks, it is recommended to back up all data onof this instruction.

1. Download and put in memory of your smartphone (remember where) SuperSU 2.76 patch:Attached fileUPDATE-SuperSU-v2.76-20160630161323.zip(4.74 MB)
2. Place the block map (scatter file)from its firmwareand the recovery.img image on the computer in one folder. Using the SP FlashTool program and the "Download" option, flash the image into the memory of the smartphone.
For Dummies
Attached Image
3. After successful firmware, unplug the cable, by pressing the combination of "Power" and "Volume UP" immediately enter the TWRP recovery.
4. Press the "Select Language" button to select a language, tick the checkbox "Do not show again" and make a swipe at the bottom of the screen to go to the TWRP main menu.
5. Select the "Install" menu item and install the SuperSU 2.76 patch from the first item. The result of a successful installation will be
Attached Image
6. Reboot to the system. In this case, the smartphone will reboot 2 times - this is normal.
7. After that, you can enter the recovery and make a backup.
8. Keep in mind that OTA updates on the modified system will not be installed.


Post has been editedjemmini - 19.09.16, 00:23
Reason for editing: added build for BF169 based on C017 firmware


--------------------
Xiaomi Redmi 4X 3/32
Sinafor
Message#17
01.07.16, 07:54
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 99
Check in: 13.11.11
Highscreen Boost 3

Reputation:-  7  +

123123 @ 20.06.2016, 15:00 *
Highscreen Boost 3 - Android 6.0
123123 @ 20.06.2016, 15:00 *
It seems everything works, but I need help in testing everything and everything, to further improve the firmware.
If we are talking about the battery, then let me inform the following "misunderstanding" in this part:

1. As it was before(on other phones + on Boost_III_L007):
Every day, sitting down in the car, turn on the phone in autoload, turn on the DVR (VideoReg), turn on the Internet radio (FMCube), turn on the BT handsfree, for 15-30 minutes in this mode, I go to work. During the day, often, but irregularly, there are trips in the same mode + navigator (Navitel). In the evening - return home "in the first version." Naturally, in the afternoon - calls, mail, the Internet, etc. (not very intense). This mode of operation allowed me not to use charging at home at all - there was enough automatic charging. Below 60% charge did not decrease.

2. How was afteryesterday's installation of android 6.0 (Boost_III_C024):
I turned on one DVR, I go and I see that, despite all the signs of the charging process (LED, battery symbol, etc.), the charge percentage REDUCES !. I understand that the percentage is a crafty thing, especially in the absence of calibration data on the battery, so I putBatterySpy(usually it was always included - convenient and useful software for me), which solemnly showed me that both the percentage and the voltage on the battery are decreasing.
Without energy-intensive programs, charging in principle goes, but subjectively it is not very fast (I just didn’t learn it in detail - I just set up 6.0 yesterday with a “nocher”)

3. Additions, interim conclusions, questions ...
Charging in the car "good", proven over the years, 2000mA. For the purity of the experiment, I put another in its place (emergency spare for 500 mA) - the picture does not change.
Of course, I understand that in BOOST, the camera eats "well, very good appetite" (the phone heats up very noticeably), but not more than 2000mA!
Based on all this,guessthat time
- "consumption physics" has not changed (phone, camera, working software)
- "production physics" has not changed (power supply, USB cord)
- changed firmware (L007 ->C024)
then the reason for my situation is precisely in something that controls the process of charging the battery. It feels like just a stream of electricity from the power supply in something rests on the way to a starved battery.

I am not ready to influence this problem (I don’t know much), but I am ready to continue the experiments, so that the "older comrades" help me (and maybe not only me) to overcome this problem.

PS1 - there is certainly a chance that it was at the very moment of the firmware change that my "good" autoloader miraculously half-died and stopped giving the necessary current, but ... I believe it with difficulty. Although...
---------------[some time later]
PS2 - the probability of Note 1 is excluded: I tried to connect another charge in the DVR mode (“very good” - battery, 2100 mA for charging current) - the effect is the same. Moreover, when I used to charge the phone from this rechargeable battery, it warmed noticeably, especially when the phone battery was deeply discharged. And now the heating is not observed, but the phone is discharged, i.e. I remain at my assumption - the phone "does not want / cannot" accept the necessary current. I'll wait, watch, wait for the battery calibration ...

[After a few days]

Experiments finished. The conclusion is clear. The charging current limit does not allow me to use firmware 6.0.
Returned to 5.1.

But there are chances:
Quote from multi-page correspondence with 123123:
Attached Image


Post has been editedSinafor - 04.07.16, 16:06


--------------------
Reality is nonsensecaused by low alcohol contentin blood...
HighscreenBoostIII (Andr5.1 L007)
77pirate
Message#18
01.07.16, 07:57
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1611
Check in: 19.12.08
Xiaomi Mi Max 3 4/64

Reputation:-  457  +

Is it possible to reduce the font in the caller? The group Primary writes as the main ... although the place is dead.
ThroughApp Settingsfor xposed, you can ... "os ... Noah" I could not do without a reduction, but to get the contact name more fit - you can ...
Amalfi
Message#19
01.07.16, 09:40
Local
*****
[offline]

Group: Curators
Messages 390
Check in: 28.11.08

Reputation:-  13  +

...
ThroughApp Settingsfor xposed, you can ... "os ... Noah" I could not do without a reduction, but to get the contact name more fit - you can ...

Dpi 380, scale 80 and everything is cool) thanks)
Zmee1ov
Message#20
01.07.16, 09:51
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 151
Check in: 19.06.16
Highscreen Boost 3

Reputation:-  2  +

Hey guys. I correctly understand that when installing the root, updates will stop coming? How, then, to check for updates and, in fact, install them?


--------------------
Highscreen Boost 3 (not PRO) / 5.1 / L007
Zullkree
Message#21
01.07.16, 10:24
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1219
Check in: 19.04.13
Oneplus 3

Reputation:-  161  +

* Zmee1ov,
Usually, this immediately becomes known here and the discussion of innovations and other things begins.
Already made updates for TVRP. It will be necessary to wait until someone makes it and uploads the file for updating via TVRP.
As here.Highscreen Boost 3 / Boost 3 Pro - Discussion (Post Snowy88 # 48183208)

Post has been editedZullkree - 01.07.16, 10:25

375 pagesV  1 2 3 4 5 6 > » 


 mobile version    Now: 04/18/19, 16:02