Xiaomi Redmi 3S / 3X - MIUI firmware
under the messages to which you want to add links. Putting a patch to disable Double2Wake on the firmware (port) from the Uv.Weritos, the battery began to keep no worse than Andryusha 6, Miu 10.
UPD. Minusators - you know where you go.
Post has been editedkeysman - 10.09.18, 19:28
UPD. Minusators - you know where you go.
Post has been editedkeysman - 10.09.18, 19:28
MIUI 10 MI RUM 9.7.11 REDMI 3S Android 7.1.2
This port is made on the basis of MIUI 10 MI RUM 9.7.11 for Redmi 4X
Port Author: weritos
Known bugs: Tell me
General Changes:
- Fully perelopachena firmware and adapted to the land
- Fixed flicker in the front chamber
- Fixed video recording (dark video)
- ZRAM is 768MB, compression LZ0
- HAL3 (2API) is enabled by default
- Apply the patch to the sound ofintro555
- Completely stable photo and video camera
- Automatic root setting (Magisk Manager).
- 7 Colors LED Indicator
- The core of the firmware adapted to the MIUI on Android 7.1 (change the kernel does not recommend)
- Added Spectrum is available either through the program or through curtain
Changes in 9.2.28
- All changes from the Mirum and Xiaomi team as of 9.7.11
Screenshots MIUI 10 (Android 7.1.2)
 |
 |
 |
 |
 |
 |
Installation :
First and foremost, determine what kind of "nationality" your smartphone, and it is two versions of this smartphone Chinese and European In order that-be to understand who is in front of you, you need a box or a good memory, you need to look at the box and find a cherished numbers that will determine the "nationality" of your smartphone may be two options: 2016031 - Caucasian and 2016030 - Chinese Next steps:
If you have determined that the nationality of your smartphone "Chinese "You can proceed immediately to the spoiler download, if you have" European "then You need to perform actions from this post ---->Here this , without them, do not even try to put the firmware, the good news is that it is done only once, and works on all firmware (4G is not falling off). If you laid the firmware through Miflash Actions will have to repeat. More information on installing in this post
If you have determined that the nationality of your smartphone "Chinese "You can proceed immediately to the spoiler download, if you have" European "then You need to perform actions from this post ---->Here this , without them, do not even try to put the firmware, the good news is that it is done only once, and works on all firmware (4G is not falling off). If you laid the firmware through Miflash Actions will have to repeat. More information on installing in this post
Download
MIUI 10 MI RUM 9.7.11 REDMI 3S Android 7.1.2
If you need the kernel that was previously installed
Revert_boot_old_miui.zip.(12.06 MB)
and acc.and patch to disable Double2Wake
If you need the kernel that was previously installed
Revert_boot_old_miui.zip.(12.06 MB)and acc.and patch to disable Double2Wake
Remember: everything you do - you do at your own risk!
The authors of modifications and the Administration of the forum are not responsible for the performance of your devices
Post has been editedweritos - 23.07.19, 22:59
Reason for editing: v9.7.11
askazanov , Systems and kernels are new - there will be no su, and there will be Mulzhisk. What did he not please you?Askazanov @ 09/11/18, 08:43
WERITOS, if I infuffed how to upgrade on 8.8.30, I have a root of rights do not fly, as I have SuperSU. Or conflicts will not occur during installation. I look here the root will make Magisk.
Remove Supersu and leave the Magic if that. I renewed it and rolled it from above, without any wipes. IMHO, but Miuipro 8.8.30 works quickly and smasher.
I stitched the firmware from 8.8.30 | 10 | Nougat | TWRP. Miuipro from Welitos. The first couple of days everything was fine, but then stably once a day the phone completely turned off, even simply without load, and in charge, at night. That is, it does not depend on the shutdown, there was generally randomly. Today it was necessary to restart the smart, clicked on a reboot, it turned off, and then could not run the system, rebooted on the MI logo. In the tenth times turned on. Silted with all the wipes, the part put the part on a new one, part of the backup restored. Phone for almost 2 years. Where to dig?
Good afternoon. A couple of days ago I received Xiaomi Redmi 3s, they said that he just stopped turning on. I immediately connected it to the PC, the sound of the device connects and Qualcomm HS-USB QDLoader 9008 (COM4) appears in the device manager. If you just try to turn it on, then nothing happens, it does not enter the recovery, it does not go to FastBoot too. I tried to reflash through Miflash, but he was ~ 60 seconds worked and issued an error, I don't remember a mistake, but it is connected with time. The firmware took the official Global Stable, used different versions of Miflash, nothing helps. I will be glad to any advice and any help.
Foksi1987 , AdB drivers install, check if the bootloader is unlocked, you may have to sew in EDL. And in general, the hat is already up.Foksi1987 @ 09/11/2018, 09:29
Good afternoon. A couple of days ago I received Xiaomi Redmi 3s, they said that he just stopped turning on. I immediately connected it to the PC, the sound of the device connects and Qualcomm HS-USB QDLoader 9008 (COM4) appears in the device manager. If you just try to turn it on, then nothing happens, it does not enter the recovery, it does not go to FastBoot too. I tried to reflash through Miflash, but he was ~ 60 seconds worked and issued an error, I don't remember a mistake, but it is connected with time. The firmware took the official Global Stable, used different versions of Miflash, nothing helps. I will be glad to any advice and any help.
For me so memory died
Foksi1987 @ 11.09.18, 08:29
In Recovery does not enter, the FastBoot also does not enter.
These are ironing problems already.
And then, the fact that you have the phone immediately when connected it was displayed as if it was already with a closed test of Point already talking about something. Not?
Well, try to flash with a folded battery. Perhaps it will help. But ....
https://www.youtube.com/watch?v=wBYwe5yZNCA
Vitalykrepak @ 09/11/18, 11:49
And the difference in autonomy is there? And then Miipro from Weritos for a day lacks
Quietly enough for the day, turn off the awakening by double tap, and in the spectrum there is saving
Patch for all MIUI Android 7.1
- Corrects information about free RAM (while still in testing stage)
- fixes the walking processor frequencies (now if you set the minimum frequency in 422 MHz, it will not jump at 1497, etc.). Accrete a smartphone will be less
Post has been editedla.com888 - 11.09.18, 15:32
- Corrects information about free RAM (while still in testing stage)
- fixes the walking processor frequencies (now if you set the minimum frequency in 422 MHz, it will not jump at 1497, etc.). Accrete a smartphone will be less
 |
 |
Download
Post has been editedla.com888 - 11.09.18, 15:32
Reason for editing: In the header
Put the port from 4x Miui 8.9.6, I am writing a review.
In short -fully used for constant
+ You can rolling the latest versions of the googlocameras, the pictures are put up to
+ NOT FRISIT
+ The imprint works (!) Noted that the speed of triggering is lower below relative to the firmware by 6.0, well, well, who cares?
+ Battery holds worthy
+ Holds apps very well in the background. It seemed to me that better than on the six
And in general, the whole firmware is one solid plus! Disadvantages for themselves did not find
I thank the author for giving a smartphone second life: thank_you:
This firmware was done a little earlier, and Redmi Note 5 did not order: D Well, nothing, a small sister will rejoice at me updated 3s :)
In short -fully used for constant
+ You can rolling the latest versions of the googlocameras, the pictures are put up to
+ NOT FRISIT
+ The imprint works (!) Noted that the speed of triggering is lower below relative to the firmware by 6.0, well, well, who cares?
+ Battery holds worthy
+ Holds apps very well in the background. It seemed to me that better than on the six
And in general, the whole firmware is one solid plus! Disadvantages for themselves did not find
I thank the author for giving a smartphone second life: thank_you:
This firmware was done a little earlier, and Redmi Note 5 did not order: D Well, nothing, a small sister will rejoice at me updated 3s :)
jimper, If you play games, of course he heats
All that is laid out is verified personally by me, as for memory 50 to 50, but frequencies do not walk 100%
Saniab @ 09.09.18, 11:22
additional check on the Chinese may be
Therefore, the definition of Chinese or European is reduced to the presence / absence of the MEID stitch in the phone section / General Information / Information about IMEI
The Chinese have a line MEID obliged to be
Jimper @ 09/12/2018, 06:33
weritos I do not play, in fact, the usual use of VK, YouTube, the phone was cold on CustomAt Miui Pro, the same problem, I put the Rum yesterday - and the connection is better catted, and it is heated less, when used.
And yes, Fix put immediately after the firmware
But this is until the first day of use, what will happen next - see
Post has been editedvitalykrepak - 12.09.18, 08:08
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement