9 pagesV  1 2 3 4 5 6 > »  
 
REPLY
> YOTA 4G LTE WLTUBQ-108 | [usbmodem] [ltemodem]
alex @ rya
Message#1
09.02.17, 19:58
Wiedźmin
*********
[offline]

Group: Curators
Messages 10009
Check in: 04.09.13
Xiaomi Redmi Note 3 Pro Prime

Reputation:-  3397  +

YOTA 4G LTE WLTUBQ-108 - Discussion


A photo:
Attached Image
Description:
Specifications:
Useful links:


There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links, or through QMS.

Post has been editedvelikashkin - 20.04.18, 12:19
Reason for editing: Firmware version YRMR2_1.10
payalnic3
Message#2
25.06.16, 20:58
a guest
*
[offline]

Group: Users
Messages 6
Check in: 28.04.09
HTC Desire C

Reputation:-  0  +

Hello. I got a modem here Yota WLTUBQ-108 LTE Cat.4 Who already faced? What is different from 107? Who is the device?

Device status can be viewed athttp://10.0.0.1
the link setting can only change the range of DHCP.

Device Name: YOTA 4G LTE Modem (WLTUBQ-108)
Current speed: 0 bps / 0 bps
Received / Sent: 74 KB / 42 KB
Maximum connection speed: 23.40 Mbps / 910 Kbps
Signal (SINR / RSRP):
10 dB / -100 dBm - in the computer connector
19 dB / -95 dBm - on the window on the cord
Cell ID: 250117436404
Software Version: YRMR1_1.09
Attached ImageAttached Image

I use 3 days - I got constant breaks in communication. Losing network.
This morning, when the computer was turned on, the modem was lost. After 3 minutes, the device connected to the network and the Internet on the computer earned. despite the fact that the modem never appeared in Yota Access ...
On the USB extension cable, like the WLTUBA-107 and other similar models, it does not want to work, as I understand it is also capricious in terms of power supply. That network will lose. then generally fall off from the company.
While writing this message, the connection was broken 4 times: angry:
I think it is necessary to muddle the antenna ... That's where just connect it? Sorry for the photo, the camera was capricious, and what happened with the phone.
Attached Image
Attached Image


Post has been editedpayalnic3 - 25.06.16, 21:24


--------------------
Nokia 5100 dinosaur
Rex_best
Message#3
09.10.16, 10:50
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 258
Check in: 09.11.11
Xiaomi Redmi 3S Prime

Reputation:-  13  +

Pigtail on this modem is very rare. Connects to connectors that are on the second photo (top and side of the blue panel)


--------------------
Motorola T-190 ->Nokia 3510i ->SonyEricsson T-610i ->Samsung E700->Nokia N73->SonyEricsson Xperia Pro (?) ->PiPO M2 MAX 3G->Sony Xperia TX (?) ->Sony SmartWatch 2 SW2 ->Sony SBH52 ->IPad mini cellular ->Xiaomi Redmi Note 2 Prime->Xiaomi Redmi Prime
sandwern
Message#4
09.10.16, 10:56
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 767
Check in: 24.12.11
Oneplus 3T

Reputation:-  67  +

payalnic3
I think it is necessary to muddle the antenna ... That's where just connect it? Sorry for the photo, the camera was capricious, and what happened with the phone.


Look for adapters from Hirose MS156 to [here your antenna connector]. From China you can even order packs, but we really find them incredibly difficult to find, as mentionedRex_best.

Connector
Attached Image


Post has been editedsandwern - 09.10.16, 11:02


--------------------
Siemens A35>Samsung SGH-X100>Motorola C350>Philips 9 @ 9u>Nokia 5800>Samsung GT-I9103 >Samsung GT-I9100>Samsung GT-N7100>LG H818P>Oneplus 3T
prayatsha
Message#5
27.10.16, 17:08
a guest
*
[offline]

Group: Users
Messages 1
Check in: 06.06.16
Samsung Galaxy Tab 7.0 Plus

Reputation:-  0  +

Friends, did anyone try to unlock wltubq-108? Or reflash him with IMEI?
Ekonyaev19
Message#6
26.11.16, 18:12
a guest
*
[offline]

Group: Users
Messages 7
Check in: 19.06.15
Asus MeMO Pad 7 ME176CX

Reputation:-  0  +

Also interesting.
Beaten_Sect0r
Message#7
10.12.16, 17:07
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 77
Check in: 05.12.09
Xiaomi Mi Max 2 4/64

Reputation:-  1  +

Be kind enough to share a link where to buy pigtails to it exactly suitable.
Geraskin_91
Message#8
20.12.16, 18:32
Visitor
**
[offline]

Group: Users
Messages 14
Check in: 12.07.12

Reputation:-  0  +

Hello!
Doesn't bother you that there is an antenna in this modem
iron so about usb connector from the backlight logo
Is this not a wifi case?
countrist
Message#9
27.12.16, 13:15
Visitor
**
[offline]

Group: Users
Messages 12
Check in: 21.05.14
Xiaomi Mi Max Standard

Reputation:-  1  +

Here is the sale of such pigtails to an external antenna:

this is not an advertisement, he bought from him himself, he came 3 weeks before the Amur Region. Everything is fine, but you need to carefully but with a lot of pressure when connected, it is inserted into the latches. about working with the antenna, as I understand it, the socket near the butt is responsible for 3g, the socket in the middle of the edge of the board seems to respond for 4g-lte.
About the unlock is also very interesting, will wait for modem gurus)))


--------------------
Xiaomi Mi Max3/32/MIUI v8 Developer by MultiROM

-= Mi Max �lite Club =- download

cioxideru
Message#10
17.01.17, 18:20
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 106
Check in: 14.10.11

Reputation:-  1  +

countrist @ 27.12.16, 13:15*
this is not an advertisement, he bought from him himself, he came 3 weeks before the Amur Region. Everything is fine, but you need to carefully but with a lot of pressure when connected, it is inserted into the latches. about working with the antenna, as I understand it, the socket near the butt is responsible for 3g, the socket in the middle of the edge of the board seems to respond for 4g-lte.
About the unlock is also very interesting, will wait for modem gurus)))


Do not mislead people. By reference, the adapter does not fit.
cioxideru
Message#11
17.01.17, 19:50
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 106
Check in: 14.10.11

Reputation:-  1  +

who knows what pigtail at 108? same as 107? ms168?
countrist
Message#12
21.01.17, 11:21
Visitor
**
[offline]

Group: Users
Messages 12
Check in: 21.05.14
Xiaomi Mi Max Standard

Reputation:-  1  +

Do not mislead people. By reference, the adapter does not fit.


is it based on what was concluded? I have a WLTUBQ 108 model with a MS156 socket, I have been looking for what kind of a nest for a long time, but I finally found it, then for a long time I wondered whether it was worth taking. when the order came, checked, everything works. and for especially non-believers: it does not work without it, since the signal level is about 130 dBm. When the antenna is connected, it grows to 95 dBm, noise is slightly reduced, the signal is weak, but stable. I have been using it for 3 months without any complaints.

Post has been editedcountrist - 21.01.17, 11:33


--------------------
Xiaomi Mi Max3/32/MIUI v8 Developer by MultiROM
- = Mi Max € lite Club = -
kesaman3
Message#13
25.01.17, 12:54
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 100
Check in: 05.02.14
ZTE Nubia X6

Reputation:-  15  +

who knows what pigtail at 108? same as 107? ms168?

The people that you bathe, order pigtails from Ali, wait ... Take the solder in your hand and solder the antenna, I took the antenna from the tsiskov router, cut off the connector and soldered for 5 minutes.

Attached images
Attached Image
monomar
Message#14
30.01.17, 08:56
a guest
*
[offline]

Group: Users
Messages 3
Check in: 30.07.14
Xiaomi Redmi Note 4 3/64

Reputation:-  0  +

The people that you bathe, order pigtails from Ali, wait ... Take the solder in your hand and solder the antenna, I took the antenna from the tsiskov router, cut off the connector and soldered for 5 minutes.


And here please in more detail ...

And post a screenshot in a better way, please.
cioxideru
Message#15
30.01.17, 16:56
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 106
Check in: 14.10.11

Reputation:-  1  +

And post a screenshot in a better way, please.

+1
make a high-quality photo. Antenna solder is not a problem, sign up as the results of soldering
Sergo02848
Message#16
31.01.17, 03:05
a guest
*
[offline]

Group: Users
Messages 1
Check in: 31.01.17

Reputation:-  0  +

Hello, the problem is with the yota modem, I decided to put the router and connect the modem to the router, everything works out, BUT the problem is that when I plugged the modem into the laptop, the laptop does not see the modem, that is, it sees as a normal usb device with a serial interface, but not comes to the address 10.0.0.1, and there is no Internet, HELP the PLIS !!!
And I can not reflash through the site.

Post has been editedSergo02848 - 31.01.17, 03:15
sobol_amur
Message#17
15.02.17, 13:36
Novice
***
[offline]

Group: Active users
Messages 45
Check in: 17.02.13
Xiaomi Redmi 3 Pro

Reputation:-  0  +

I found my native firmware on this device. I decided to flash it so that I didn’t lag the computer from it. After flashing, the modem disconnected and didn’t see the computer anymore. I plugged it into another port, but the sense is zero. The modem heats up and the computer doesn’t detect .... Support, as always, shrugs and sends to the service ...: help:
vik5332
Message#18
09.04.17, 09:36
a guest
*
[offline]

Group: Users
Messages 7
Check in: 09.04.17

Reputation:-  0  +

I bought myself in China an unlocked modem k5150, for work on the Yota network. Does not see the network. gives the Orentson network and does not connect to it because I cannot enter the LC and activate the iota itself. Is there any solution?
vik5332
Message#19
09.04.17, 11:47
a guest
*
[offline]

Group: Users
Messages 7
Check in: 09.04.17

Reputation:-  0  +

everything set up ...
georgus
Message#20
24.04.17, 11:48
Visitor
**
[offline]

Group: Users
Messages 13
Check in: 15.08.16

Reputation:-  0  +

Hello to all. I have a WLTUBQ-108 modem. Guys help to understand whether it is possible to connect an externalpast the antennaand
which connector which polarization stick.
Connector like MS 156Attached Image

here is a disassembly
a photo
Attached Image
Attached Image

Attached Image

Attached Image

Attached Image
Attached Image
photos


You can see the antenna on the board through the spring-loaded contact connects to the antenna on the foil, it turns out this one antenna?
and where the tracks from the second connector go (between the shielded blocks) are invisible
a photo
Attached Image
Attached Image
Attached Image
photos

and also tried to connect in bb yusbi waited for min 5 wifi not found

Post has been editedgeorgus - 24.04.17, 12:39


--------------------
than a person is filled with something from it and spills out
georgus
Message#21
24.04.17, 12:08
Visitor
**
[offline]

Group: Users
Messages 13
Check in: 15.08.16

Reputation:-  0  +

The people that you bathe, order pigtails from Ali, wait ... Take the solder in your hand and solder the antenna, I took the antenna from the tsiskov router, cut off the connector and soldered for 5 minutes.

buddy if I am not mistaken you did not turn off the internal antenna, it turns out the external antenna is connected via Conder


--------------------
than a person is filled with something from it and spills out
Yota
 

9 pagesV  1 2 3 4 5 6 > » 


 mobile version    Now: 04/18/19, 15:33