[X]Assistant

[ctich]

macOS Sierra 10.12

Hackintosh on PC - discussion | OS X 10.11 El Capitan | Hackintosh on PC - macOS High Sierra 10.13 | Hackintosh on PC - macOS Mojave 10.14 | The choice of components for Mac OS X (hakintosh)

How to ask a question

When asking a question please indicate:
Processor: Intel i7 4770;
Motherboard: GA-Z87-DH3;
Video card: NV GTX660;
Loader:
Clover -2671;
Chameleon -2258;
Mac OS X version;
Attach a screen with a problem and hide it under the spoiler.
If you want help with this topic,highly recommended enter the description of the components in signature : (example: Processor / Motherboard / Video Card / Bootloader).

[b] Processor: [/ b] | [b] Motherboard: [/ b] | [b] Video card: [/ b] | [b] OS version and bootloader: [/ b]
[spoiler = problem screenshots] Attach screenshots or photos here [/ spoiler]

Install macOS Sierra

Installation only for the brave, who is not afraid to lose the Old!
macOS Sierra 10.12 (16A201w) Developer Preview

Useful links:

All references to methods of making video, audio, prots and other things inHackintosh on PC - discussion

1. http://www.apple.com/macos/sierra-preview/
   
2. How to create a bootable USB flash drive with macOS Sierra 10.12
   
3. How to install macOS Sierra
   
4. How to create a bootable USB flash drive to install macOS Sierra
   
5. Installing and configuring VoodooHDA.kext
   
6. Installing OS X on Sony PCG61715V
   
7. Patches for macOS Sierra and SkyLake

Links to images:

пїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅ BDU 10.7.5-10.12.4 download

Links to images for BDU 10.7.5-10.12.4 with torrent nnmclub.to

When installing macOS, the presence of keys -v debug = 0x100 keepsyms = 1 is mandatory !!!
The main rule / requirement of the topic - want to get help / advice fill out your signature indicating:
Processor | Motherboard | Video Card | OS X version | Loader.
Without a signature, all messages are deleted.

Post has been editednikitenich - 04.06.18, 22:31

[Ur4ela]

I found this

Screenshot

, so I wondered why the sound works after removing AppleALC (config from the captain) o.O

[CSU]

Ur4ela,Clover configurator never used, did not advise, and it wasn’t when it started.

[Ur4ela]

CSU @ 06/28/2016, 08:10

Clover configurator never used, did not advise, and it wasn’t when it started.

I try to leave with him I compare the lines, where and how the values ​​change, I started just with it, deleted the patch on ApleeHDA, left only
Inject AUDIO 1, I think this is a Latout (or does the latout change in the kext itself?), but ApleeALC was picked up due to the fact that it renamed incorrectly intoApleeALC.kext.oldThat was neponyatka.

[sanata]

I always use the configurator, even though it is scolded and discouraged from its use. Maybe in its first versions there were jambs, and many "hackintoshnik" well remember the negative experience of its use? Personally, I have no problems with the configurator.

[Kent5373]

sanata,
Today conducted an experiment.
I took the working config, copied it to the desktop.
Then the same config on the air, opened the configurator, and then closed.
The axis does not start.
I open the saved config and config after the configurator in the plisteitor, and compare line by line. You will laugh, but everything is the same))
And it all works. What he writes there sometimes according to his whim, I do not know, and I have no desire to understand.
But to make the correct config for your hardware and get a non-starting axis, will force the novice to cut the config, and cancel the necessary fixes and add unnecessary ones. Vryat-he thinks the configurator. :)
PS: Updated the first post in the topic, section "Usefulness" - Smooth scrolling ..

Р—Р«2:Added in the first post "Brief phased installation instructions 10.12 Sierra."
Write comments and additions. And so I tried to paint in full. But this can only be understood by me :)

Post has been editedKent5373 - 30.06.16, 10:13

[CSU]

Something new there, but should have already. o.O

[Kent5373]

CSU,
too early) corrections and additions to the first post?
And already someone minus slapped post))))

[CSU]

Kent5373,What is there to fix? Everything is written as it is, but the minus probably did not work out for someone, that's all. I can add that I used the system instead of Klever-DVD IAtkos L1-Lev 10-7 with its chameleon downloader , normally it turned out. So as not to forget the method.

Post has been editedCSU - 30.06.16, 18:50

[oelg]

Hello, who does not support the processor, here is a link to the packhttp://dosdude1.com/sierrapatch.html

[Kent5373]

Shoore,
Link corrected.
oelg,
Do not mislead the people.
First this tulza for the model, and not for proca. And secondly on the hacks, it is useless.
For non-processors, there is no solution yet.
CSU,
It would be possible to add, but I will not. The people and in this simple step-by-step instructions will be confused :) And you with DVD iAtkos L1-Lev 10.7 with its chameleon downloader, yeah))))

Post has been editedKent5373 - 30.06.16, 20:51

[Ur4ela]

New Implement ALC.kext 1.0.12

Starting from version 1.0.12, AppleALC will be disabled by default for “unsupported” versions of operating systems (currently 10.8, 10.9, 10.10, 10.11 are supported), unless the -alcbeta argument is specified. This will protect fans of betting against oddities now and in the future.

I work for latuot 1.
For inclusion, write in the config argument-alcbeta(for "unsupported"operating system versions)

download

1.0.12.RELEASE.zip(426.24 KB)

Or
download
List of supported cards and numberslayoutfor sound worklook here

Post has been editedUr4ela - 01.07.16, 23:10

[CSU]

With Voodoo raised, currently raised with Dummy.

[Ur4ela]

CSU @ 07/01/2016, 21:57

With Voodoo raised, currently raised with Dummy.

It also works with Voodoo, but I could not figure it out, when you turn on the hiss and you need to run prefPanel and adjust there, did not understand how to make these adjustments remain after reboot.

[CSU]

The settings are registered in the Voodoo info.play and there is no need for any prefpanel, the Disabler is embedded by the plugin, in the end one text into the folder with the system number after downloading you have sound. : D

Post has been editedCSU - 01.07.16, 22:55

[Ur4ela]

CSU @ 07/01/2016, 10:47 PM

Settings are registered in the Voodoo info.list

Here, I understand correctly?

[CSU]

Yes, and the 11 node is also disabled (Pass-through Channel) - below. Although options are possible. An example of my worker

Post has been editedCSU - 01.07.16, 23:16

[Ur4ela]

CSU @ 07/01/2016, 23:06

Yes, and 11 noda (Channel Through) is also disabled - below. Although options are possible.

Understood, you described the instructions laid out, thanks I will "torture" him. :)

Post has been editedUr4ela - 01.07.16, 23:25

[CSU]

Ur4ela,In general, it is quite a decent sound and fuss, respectively, less, once set up and forgotten. Checked for "myself."

Post has been editedCSU - 02.07.16, 13:32

[Ur4ela]

CSU @ 07/01/2016, 11:46 PM

just information. Verified on "me."

Just with voodoo, HDMI works for me and also the front panel, and only silence is green

[CSU]

Ur4ela,Set up? Well, enjoy with pleasure!

Post has been editedCSU - 02.07.16, 14:37