[X]Assistant

[kovirolik]

Oukitel U7 PRO - Firmware

Description | Discussion пїЅ | Firmware пїЅ

Drivers and Utilities

MTK65 ** PRELOAD + auto installer

Official firmware

T825w_648_aw_oukitel_u7pro_ddr3_v1.1_20160229
Update 2.12 for DDR2
T825W_648_AW_OUKITEL_U7PRO_V2.8_20160113 update 2.8
T825W_648_AW_OUKITEL_U7PRO_V2.8_20160113
T825W_648_AW_OUKITEL_U7PRO_V2.7_20160106
Oukitel U7 Pro v.2.1 (Post Schkodnik # 45120608)
Firmware, Flashtool and instructions
OUKITEL U7 PRO V2.8 for installation from under mod. Recovery
New firmware version

Unofficial firmware

Amigo os
CyanogenMod 12

TWRP recovery

TWRP 2.8.7.0 for Oukitel U7 Pro
TWRP 3.0.2 for Oukitel U7 Pro
If after installation and reboot TWRP flies
If TWRP is not sewn

Instructions

Getting ROOT
Easy way to get ROOT without recovery
Disable soft keys

miscellanea

NVRAm backup

There is no curator in the subject. For questions about filling the caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editedvaalf - 05.07.18, 13:50

Reason for editing: NVRAm backup

[Schkodnik]

Official firmwareOn needromRegistration required
Same firmware onYadiske

P.S. Firmware programSP Flash ToolThe phone came with firmware v1.9. I changed it to 2.1 OK
...
Update to version 2.2download
Update to version 2.4Download

Post has been editedSchkodnik - 22.12.15, 20:11

[garick100]

Schkodnik,
And is the air updated?

[Schkodnik]

It was v1.9 OTA tried to update, writes that the latest version. Found 2.1 flashed. I will not say anything about the update, as I did not go into it.

[jemmini]

TWRP 2.8.7.0 пїЅпїЅпїЅ Oukitel U7 Pro download

In the recovery, by default, the theme "Play" fromz31s1g, and the additional two themes "Dark" and "Light" can be downloaded from the author's site:Materialized theme

How to install an alternative theme

About version

Recovery is assembled based on the Android 5.1 firmware kernel version of the build: T825W_648_AW_OUKITEL_U7PRO_V2.1 build.date = 2015 年 11 24 日 15:04:02 CST

Screenshots

Download

Download image file:recovery.img(11.58 MB)

Features unlock with swipe

At idle time, by default, a rather short time interval is set in recovery, after the expiration of which the recovery goes into power saving mode, the screen goes out and is blocked. To unlock, you need to make a svayp, but it works in a special way: you must slowly stretch from left to right, across the screen, without removing your finger from the screen.

In order not to snoop on the screen at random, in the main menu, via the "palette" icon (for the "Play" theme), check the last box on the "Use alternative lock screen" to help overcome this problem ...
Also, I draw your attention that in the settings there is an opportunity to increase or completely disable the idle time for falling asleep.

Acknowledgments

SchkodnikThanks for testing the recovery.

Post has been editedjemmini - 23.10.16, 00:16

[Schkodnik]

ROOTReceived through TWRP 2.8.7.0 by built-in tools.
We start the superuser, upon the request to update we agree and update the binary file
Normalway to reboot.

P.S. Observation (important for me). After receiving the root with the built-in TWRP tools and modifying the memory for the interval, Xposed refused to install. Therefore, I had to flash with full formatting and restoring IMEI (backup nvram) Having skipped the modification, installedzip archive from here. And for those who will continue to put on the phone Xposed, I advise you to first put it, and then flash the above patch Super SU.
And the last (should be the first item) - as soon as they installed custom recovery -right awayBackup and copy it to removable media.

Post has been editedSchkodnik - 13.12.15, 19:14

[Schkodnik]

Lex_GSR @ 12/19/2015, 09:11

TWRP is not sewn, gives an error

ProgramSP_Flash_Tool_Win_v5.1524.00.rar(27.67 MB)
for flashing the phone. In the archive, the scatter file for the firmwarerecovery.img(TWRP).
Instructions for flashing the phone with this program can be found inProfile branch. Similarly, for firmware recovery in the nextbranch. thankhanuma50 .

Post has been editedSchkodnik - 19.12.15, 15:24

[Schkodnik]

If this is observed, then you need to delete the file /system/recovery-from-boot.p RootExplorer. This file "blows" non-native recovery with each reboot. To do this, we re-sew the TvRP, without turning on the phone, go into it and flash the zip with the root patch that is needed for the rutexplorer and rename the extension of this file from .СЂ to .bak or any other. Possible re-sewing recovery

Post has been editedSchkodnik - 28.12.15, 19:08

[Schkodnik]

Preloader DriverMTK65xx.zip(393.43 KB)

Auto installer driversDriver_Auto_Installer_v5.1453.03.rar(33.19 MB)


Post has been editedcherva70 - 07.01.16, 07:51

Reason for editing: In the header

[Oukitel Mobile]

Hello, dear usersOukitel U7 Pro!

Recently, you encountered a flash problem and its incorrect operation. I sent all your complaints above. Today, engineers sent me a new version of the firmware. It would be nice if among you there were skilled volunteers and tested it. If the problem persists or emerges in a different form, you will have to send a second round of improvements. We apologize for the inconvenience caused, we hope for your understanding.

For impatient:
Baidu: http://pan.baidu.com/s/1hrlavDq

For others:
Yandex.Disk: https://yadi.sk/d/fKgxKoGomoCBJ

Attention!
If you are not well versed in the process of flashing, we recommend that no action be taken! Firmware at the moment exclusively for the test "advanced" audience.

Post has been editedcherva70 - 12.01.16, 20:42

Reason for editing: In the header

[anatol1983]

T825W_648_AW_OUKITEL_U7PRO_V2.8_20160113update 2.8, downloaded from needrom.com and uploaded to Yandex

[region98]

Collected stock versionOUKITEL U7 PRO V2.8 for installation from under mod. Recovery(TWRP, CWM, etc.)

Of the differences, the root is immediately sewn. Installation as usual with wipes.

: download:OUKITEL U7 PRO V2.8

Check and unsubscribe. I have nothing to check.)

Post has been editedregion98 - 04.02.16, 01:22

Reason for editing: In the header (updated)

[jemmini]

TWRP 3.0.2forOukitel U7 Pro

- based on Android 5.1 firmware version T825W_648_AW_OUKITEL_U7PRO_V2.1 / 2015 年 11 月 24 日 �期二 15:04:02 CST:recovery.img(13.35 MB)

Stock recovery

Stock recovery from the specified firmware:recovery.img(7.1 MB)

- based on Android 5.1 kernel firmware version T825W_648_AW_OUKITEL_U7PRO_DDR3_V1.6 / 2016 年 03 月 17 日 �期四 11:57:41 CST:recovery.img(13.35 MB)

Stock recovery

Stock recovery from the specified firmware:recovery.img(7.1 MB)

ATTENTION! Install the build version corresponding to the revision of your device and the installed firmware!

Post has been editedjemmini - 14.05.16, 10:36

[coons]

digitop,In the screenshot you had a little bit more. Only the image of the recovery should have been displayed in the flash drive.

[Aleksej0402]

Roman91777 @ 05/03/2016, 09:01

What is the name of the virus that the application is constantly trying to deliver, the call id, and so on, has frozen, what else can it be?

What firmware?

[Louis]

Good day to all! People please tell me step by step how to get root on the Oukitel U7 Pro. The more I read, the more I get confused ..... no sucks of super-sucks just give nothing. I have a wife on Dugi X5 just installed a zip file through the standard update and that's it. And there is no such file? I would be very grateful for the help.

[Aleksej0402]

Louis @ 05/03/2016, 11:35

Good day to all! People please tell me step by step how to get root on the Oukitel U7 Pro. The more I read, the more I get confused ..... no sucks of super-sucks just give nothing. I have a wife on Dugi X5 just installed a zip file through the standard update and that's it. And there is no such file? I would be very grateful for the help.

In the cap there is a receipt of the root without recovery. Where even easier.

[digitop]

Coons @ 05/03/2016 10:00

Digitop, in the screenshot you had a little bit more. Only the image of the recovery should have been displayed in the flash drive.

Right and i about thatwrote above - With error 4008, it was only when I selected the scatter from the folder with the firmware, and the recovery from the other.
This was the first attempt to flash;)
further did so

[digitop]

Louis @ 05/03/2016, 12:35

People please tell me step by step how to get root on the Oukitel U7 Pro.

Elementaryto get root you need:
1) In the settings-security - put a daw on Unknown sources
2) In the settings - on the phone - tap it 7 times on - the firmware version (the lowest point), a menu item will appear - For developers
3) In settings — for developers — tick Enable debug via USB
4) DownloadKingroot, install and run it. Click try root and wait, maybe the phone will reboot itself, then repeat the operation. From the first time it may not work. When the root is receiveddo not restart
5) DownloadSuper-Sume v6.2And run, on the request of root rights, click - allow. Then click on the blue circle and wait. At the end, SuperSU will be installed, start it, at the question to update the binary file, click YES / normally. Then restart. Is done. Super-Sume can be removed.
Shl. In the settings, the application will have one component from kingroot (Purify), delete it and reload the body: yes2:
zyzy. using RootExplorer, delete the callerID *** folder in system / app and in data / dalvik-cache callerID ***. dex so that there are no persistent offers to set rubbish
VIDEO INSTRUCTION watch

Post has been editeddigitop - 09.05.16, 18:23

[AleksOH]

m [

Louis @ 05/03/2016, 12:35

And there is no such file? I would be very grateful for the help.

Received the root through the update, with the stock recovery just a patch from the x5 arc, a new version, specifically flashed the bare firmware v2.8, the old version of the patch did not work for us, try
update-ROOT-UNIVERSAL.zip(5.05 MB)

Who needs a root and does not want to put TWRP try and unsubscribe to pick up a hat
We throw on the flash drive, turn on usb debugging in the developer menu, security-tick the installation from unknown sources.
wireless update, three points at the top - local update, select the file (updater-script) update the body will reboot, install the update, restart again and the root is received. checked for v2.8 and firmware from BQS 5505 V1.4

[digitop]

After flashing to DDR3 v1.6, problems got through the days:
1) sometimes on the screen after turning on the vertical bars on the floor of the screen (the left half of the display), as if the train is moving
2) the camera began to run for a long time (from other applications for working with the camera) you have to restart the application several times
Before that, when the “factory” firmware DDR3 v1.1 was installed, the bodies worked for a couple of weeks without such glitches!
As far as I understand this firmware DDR3 v1.1 is nowhere to be found, but maybe someone has it in the form of a backup for recovery or a saved system image?
And also, whoever loads themoff.siteorthis? It is interesting to see what version of firmware there is